Used Magellan Magellan Scanner Checkout + Bizerba Scale for sale (2,719)

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. Tjdpfsz Hq Rbox Ahmoc • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Brand new never used. Please check out our other listings as well.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10662 Todpsz Adt Rsfx Ahmjc Manufacturer: STARRAG HECKERT Type: HEC 1250 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology, and the machining of large gearboxes and engine components. - Powerful motor spindle (up to approx. 82 kW, depending on the model) for heavy-duty machining. - The Heckert HEC 1250 Athletic (built in 2009) is a high-performance, modular 4-axis large-scale machine for the precise complete machining of heavy workpieces. The machine can be viewed while powered on by prior arrangement.

Condition: excellent (used), Year of construction: 2025, operating hours: 60 h, functionality: fully functional, warranty duration: 12 months, Equipment: documentation/manual, The wooden frame painting robot system consists of: KUKA IONTEC KR20R3100 robot with KRC4 controller and 7th axis integration 7th axis linear track with servo drive and robot lifting system Control cabinet with a 15” touchscreen interface Beckhoff Safety system with the option to connect safety light barriers or safety mats Spray control system with 4 proportional valves and solenoid valves Automatic nozzle cleaning unit 8 digital inputs / 8 digital outputs for communication with the conveyor and rotation systems 3. Technical Specifications Parameter Value Working range L = 4,000 mm × H = 2,500 mm 7th axis track length 6,000 mm Maximum robot axis speed 700 mm/s Adjustable painting speed 50–400 mm/s Compressed air requirement 8 bar (1,250 l/min) Power supply ~3 × 400 V, 50 Hz Scanner resolution 7 mm × 7 mm Installed power 15 kW Maximum tool weight 20 kg 4. Frame Recognition and Scanning System The scanning system consists of: Industrial scanner Encoder Dedicated software with an automatic program generator The system detects: Object shape Position relative to the traverse Contours Based on scanning data and operator-defined parameters, the software automatically generates the optimal painting program for the robot. 5. Flexible Recipe System Surface coating quality depends on adjustable, operator-defined parameters. The system allows the creation of unlimited product recipes depending on: Product type Product size Frame configuration (frame, sash, panel) Profile type Large and small format frames Separate parameter sets ensure optimal paint coverage for each product type. Adjustable Parameters: Robot painting speed Spray gun angle relative to the product Spray gun distance from the product Tsdpfx Ajzl Sbzshmec Spray start and stop delay Paint reduction at intersections and corners Product thickness Spray penetration depth for internal surfaces Air flow regulation Paint pressure control 6. Painting Process Sequence 1. External surface coating 2. Internal surface coating 3. Final facade finishing layer This sequence ensures complete and uniform coverage of all surfaces. 7. Supported Products The software can automatically generate painting programs for: Standard rectangular European windows (without additional trims), where the internal opening painting surface ≥ 350 mm Flat-surface Closed door frames mounted on a traverse (no open ends)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. Todpfxewirico Ahmoc - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: used, 90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Todpfx Aok Aa Izehmec Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2013, operating hours: 25,254 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: S40302, TOMRA AUTOSORT 4 optical sorting system equipped with VIS/NIR technology for the automatic separation of materials based on polymer and/or color. • Working width: 2,000 mm • Hour counter: 25,254 hours • Condition: operational until December 2025 • Current status: disassembled and available for inspection The hour counter indicates 25,254 hours, although a significant portion of these corresponds to periods in standby mode, meaning the actual operating hours of the scanner are lower. Suitable for sorting plastics and other materials using VIS/NIR identification, enabling separation by polymer type and by color. Todpfx Ahjzbtvtsmoc

Condition: used, The SEITAL SPX SE05X cream separator is a machine used primarily in dairy processing to separate cream from milk. Here are some key features and information that are commonly associated with cream separators like this model: - Separation Process: Cream separators work on the principle of centrifugal force to separate cream from milk based on their different densities. - Capacity: The SE05X typically features a specific capacity for processing milk per hour, which is essential for both small-scale dairy farms and larger dairy operations. - Material: Most cream separators are made of high-quality stainless steel to ensure hygiene, durability, and easy cleaning. - Efficiency: The design usually maximizes the separation efficiency, allowing for the extraction of cream with a high fat content while minimizing the fat content in the skimmed milk. - Ease of Use: These machines are designed for ease of operation, requiring minimal manual interaction once set up. - Applications: Beyond separating cream from milk, they can also be used for other applications in the dairy industry, including buttermilk separation and processing of other liquids. Tsdpfx Aoxzxuashmec - Maintenance: Regular cleaning and maintenance are essential to ensure optimal performance and longevity of the machine. Manufacture: Seital Model: SE05X Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Tedpez Aibaofx Ahmec Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: used, mileage: 83,378 km, power: 70 kW (95.17 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 09/2026, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Transmission damage. For sale is a Mercedes-Benz Sprinter 310 CDI with box body, first registered in 07/2011, and showing 83,378 km on the odometer. The 2.1-liter diesel engine (2,143 cc) with Euro 5 emission standard is known for its reliability and durability, but is currently affected by a transmission fault. The vehicle is equipped with a reversing camera, making maneuvering on construction sites, in parking lots, or in urban environments easier. The box body offers ample storage space and secure protection for tools or materials. The cargo area is professionally fitted with shelving, providing organized and easily accessible storage for tools, spare parts, or materials. Even in its current condition, the Sprinter serves as a solid foundation for repair or conversion projects. This vehicle is ideal for buyers seeking a robust Sprinter with sound engineering and who are willing to repair the transmission, or for those looking to use the vehicle for spare parts. Todpfxsxmlgao Ahmsc Sale is only to business customers (agricultural businesses, freelancers, small- and large-scale enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 700 mm Travel distance Y :450 mm Travel distance Z: 420 mm max. workpiece size X: 910 mm max. workpiece size Y: 660 mm max. workpiece size Z: 400 mm max. workpiece weight: 1200 kg table size X: 650 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +101 generator: 30 Ampere submerged cooling unit CNC wire EDM machine 5 CNC axes: X / Y / Z / U / V Automatic wire threading Dual Water Jet with Annealer Automatic wire break recovery 15" TFT touchscreen Linear glass scales in X / Y Dielectric chiller Automatic temperature control Max. table load: 1,200 kg Max. machining current: 30 A Programmable wire tension: 2–30 N Tsdpfx Ahez Aq Dvsmec Standard wire spool: 16 kg Machine weight: approx. 6,000 kg

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Tsdpfx Ahjw Ah Axomsc Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: refurbished (used), Maja ESM 435 – completely overhauled and immediately ready for use The machine has been completely overhauled by us. During this process, all bearings were replaced, electrical components were exchanged, and a new power supply line was installed. The Maja ESM 435 impresses with its compact design and simultaneously large working area. It delivers very good results in terms of scaling, is easy to operate, and runs extremely quietly. This machine is particularly interesting for direct marketers, agricultural businesses with their own slaughtering facilities, and smaller butcher shops. Why choose a used machine from Amfotech? We are not a typical used machine dealer, but rather come from a technical service background. Therefore, each machine with us is: Tedpfez Ah Sdsx Ahmoc * disassembled and thoroughly inspected * technically completely reviewed * equipped with new wear parts * provided with new electrical components if necessary * delivered with a one-year warranty on used machines This way, you don't receive a machine that has simply been cleaned, but a technically overhauled machine that you can rely on in daily use. If you are interested or have any questions about the Maja ESM 435, please feel free to contact us directly.

Condition: good (used), 1 x Handtmann VF608 plus Year of manufacture 2015. Industrial vacuum filler for precise, continuous filling and portioning of meat products, sausages, and other pumpable food mixtures. The machine features programmable portion control, robust hygienic stainless-steel construction, and straightforward operation. Suitable for butcheries and medium-scale food production, with compatibility for various Handtmann attachments and auxiliary equipment. Tsdpfxoz Ak Ihe Ahmec Video available

Condition: used, Year of construction: 2018, operating hours: 995 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich EFG 215 electric forklift, year of manufacture: 2018, operating hours: only 995h!, previous owner: German Armed Forces, rated lifting capacity: 1,500 kg, lift height: 4,300 mm, fork length: 1,200 mm, sideshift, triplex mast with full free lift, cabin, scale with printer, in very good condition, immediately ready for use! On request, we can provide you with a leasing or financing quote. Mr. Mihm (phone) will be pleased to assist you. Further information can be found on our website. Subject to error and prior sale. Power steering, cabin = Further information = Tjdjy Ttkvepfx Ahmsc Lifting capacity: 1,500 kg Overall height: 200 cm Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Todpfew U Tlzsx Ahmjc Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: new, Year of construction: 2026, functionality: fully functional, 5 kW, 7.5 hp, movable on sturdy swivel casters Cutting height 200 mm Cutting height at 45°: 140 mm Swivels to the left up to 60° Swivels to the right up to 45° Cutting length 420 mm at a 90° position Cutting length when swiveled to 45°: 300 mm Tiltable to the left 60°, tiltable to the right 30° using a hand crank from the rear (also possible from the front on request) Tjdpfjdxxadjx Ahmec 1 piece saw blade 520 x 4.4 x 50 mm, 60 teeth, negative bevel Left roller bed with scale and stop slide, length 2000 mm to the saw blade Machine length 4000 mm 1 piece roller bed extension with scale and 2nd stop slide Mounting side: left, length 4000 mm. This extension roller bed also features an extendable measuring rod with a stop, allowing for precise cutting of wood on the left side up to a length of 7500 mm. 1 piece infeed roller bed, mounting side: right, length to the saw blade 2000 mm, can also be extended. Options: pneumatic material clamping Laser cutting guide With appropriate modifications, also suitable for aluminum processing Can also be supplied with a cutting height of 215 mm or 240 mm for an additional charge Without the extension roller bed, the machine costs €13,969.00 net.

Condition: used, mileage: 105,157 km, power: 78 kW (106.05 HP), first registration: 11/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 01/2027, fuel: diesel, fuel consumption (urban): 8.9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 from Deutsche Post. Other services: - Various loading options - Registration service - Delivery possible within Germany for an additional fee Inspection possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 Tedpoz Awftefx Ahmjc 76865 Rohrbach (Pfalz) Phone: E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sale only to businesses (agriculture, freelancers, small and large-scale enterprises) or export. Subject to prior sale and errors. CoC available. The listed equipment was determined using a VIN inquiry; technical errors may occur.

Condition: used, mileage: 82,678 km, power: 78 kW (106.05 HP), first registration: 08/2013, fuel type: diesel, empty load weight: 2,418 kg, maximum load weight: 1,082 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,450 mm, next inspection (TÜV): 10/2027, fuel: diesel, fuel consumption (urban): 8.9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,238 mm, loading space length: 3,500 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2013, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Tsdoz Awgdspfx Ahmoc Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 from Deutsche Post. Other services: - Various loading options - Registration service - Delivery possible within Germany for an additional fee Inspection possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Phone: E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sale only to businesses (agriculture, freelancers, small and large-scale enterprises) or export. Subject to prior sale and errors. CoC available. The listed equipment was determined using a VIN inquiry; technical errors may occur.

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player Tsdpfx Ajzr Ht Eohmoc - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Condition: excellent (used), Digital measuring scale Manufacturer: Accu Rite Type: 5umS/S/N04094577, PIN 38461325213 Scale length: 45 cm Measuring length: 350 mm Tedpfx Aheg Ny Npsmsc Weight: 1 kg

Condition: used, Scale: 22 mm Technical data: - Mounting shaft: 5 mm Tsdpfx Ajzrxwcohmec

Condition: used, Year of construction: 2020, functionality: fully functional, total height: 900 mm, total length: 3,000 mm, total width: 1,500 mm, overall weight: 1,028 kg, Siegmund Welding Table Professional 750, Plasma-nitrided Size: 3000 x 1500 x 150 mm Tsdoz Dpwnspfx Ahmoc System 22 mm with diagonal grid and scale with base, standard version, 700 mm Only the table is for sale, without any accessories.

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 Todpfx Asz Aha Iehmec • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: like new (used), Year of construction: 2026, functionality: fully functional, We offer you: CNC turning and milling center with robotic automation Manufacturer: DMG MORI Type: CLX 450 TC Year of construction: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel paths: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool interface: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Internal clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct linear scales in the X and Y axes - Double-circuit filter - Counter spindle ISM 65, A2-8, C-axis and hydraulic spindle brake - Hinged belt chip conveyor, incl. coolant tank - Chuck flushing device on the outside for the main and counter spindle - Coolant supply through the counter spindle - Coolant spray gun - Screen cleaning for the safety shield - Electronic handwheel (if available) - Alternating speed - Signal light, 4-color - Automatic work area door, electric - Electrical interface Robo2Go - Workpiece measuring probe, manufacturer Renishaw RMP40 (if available) - Tool measuring device, manufacturer Renishaw RP1 (if available) - Function for drill breakage detection for Renishaw RP1 - Linear scale for Z1-axis - Differential pressure monitoring 2.0 on the main and counter spindle - Tailstock function for the counter spindle, incl. foot switch - Coolant system 8/40 bar, consisting of: - Coolant tank 600 l Tsdpfx Ahjz A Ay Tjmec - Pump pressure variable 8 – 40 bar - Belt filter system - Lifting pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with dialogue-guided programming - Technology cycle for parting off the workpiece - 2x 3-jaw chuck, manufacturer Schunk ROTA THW3 265-81 - Loading and unloading system Robo2Go, consisting of: - Module 35 kg - Drawer storage incl. additional drawer - Accessories on request Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and specifications, as well as prior sale, are reserved!

Condition: excellent (used), Dividing table – rotary table Brand: PDQ Diameter: 635 mm Height: 145 mm Base diameter: 760 mm Indexing: 45° via index Tsdpjxazu Hjfx Ahmec or 1° and minutes via scale Weight: 280 kg