Used Max Wire And Strip Bending Machine for sale (78,779)

Condition: new, 200 kN stroke length max. 200 mm working feed 10 mm/sec return speed 20 mm/sec Bwjdpfx Adjy H N E No Ajl 480x1060 mm work height max. 900 mm toolpiece height max. 200 mm total power requirement 2,2 kW 200x12 mm bending capacity max. - round 48x4,0 mm weight 500 kg Overall size 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm

Condition: new, roll diameter 215 mm shaft diameter 60 mm Shaft revolutions 6 U/min 100x2 mm 80x15 mm pressure hydraulic cylinder 180 kN total power requirement 2,2 kW weight 720 kg Bwjdpfx Adjy H N E Aj Asl dimensions 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, shaft diameter 60 mm Bwjdpfx Adjy H N Evo Ajl Shaft revolutions 6 U/min roll diameter 215 mm pressure hydraulic cylinder 180 kN dimensions 1125x870x1620 mm weight 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine Bsdsy Azgwepfx Ad Aswl 2,500mm x 50mm plate capacity Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.05 mm to 0.20 mm Best achievable surface finish: Ra = 0.08 µm Bwodpfxjy E Into Ad Ael Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand control unit for convenient machine setup 15" LCD color display with lift keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic changeover between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg The machine has been cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your facility and provide training on the control system and machine operation.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Machine FANUC alpha - O I C5 Travel ranges: X 320, Y 220, U 120, V 120, Z 255 Bwodpfx Adoy E In To Ael automatic wire threading good condition year of manufacture 2004

Condition: good (used), In good technical condition and fully functional. Bjdpey Hr R Isfx Ad Aswl Year of manufacture: 1981 Max. working length: 3000 mm Max. sheet thickness: 25 mm

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm Bjdpfx Adjy Em Dgj Aowl - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Bedpfxoy D Sy Rs Ad Aowl Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, overall weight: 1,370 kg, total length: 2,880 mm, total width: 1,450 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: documentation/manual, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. Bodpfxsy Htk Ns Ad Ajwl For over 15 years, we have focused on quality, precision, and reliability. SHEET METAL BENDING MACHINE – SEGMENTED BENDING MACHINE 2.5 × 2540 Technical Specifications: Working width: 2540 mm Max. sheet thickness: 2.5 mm Bending angle: 0° – 135° Dimensions: 2880 × 1450 × 1100 mm Weight: 1370 kg Machine Description: Rigid and durable steel construction Long operating levers enabling high force transmission Segmented clamping fingers on upper and lower beam for flexible bending lengths Counterweights on operating levers to reduce effort Eccentric clamping system for secure sheet holding Upper and lower beam made of high-quality steel

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Bedpfx Aoy D A Hned Aewl Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Year of manufacture: 06/1994 Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Condition: Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Special features: High-quality machine made in Sweden Excellent build quality Industrial-grade design

Year of construction: 1997, condition: ready for operation (used), Several Wafios wire processing machines with two payoffs are available. 1) Wafios N90, year of manufacture: 2003. Including payoff Wafios AHL 41 D-M, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N6. 4) Wafios N5. 5) Wafios N4. 6) Wafios N4. 7) Wafios payoff AHL 41 DR, year of manufacture: 1998. 8) Wafios payoff AHL 41 D, year of manufacture: 1997. All machines including payoff. An on-site inspection is possible. Individual sale possible. Bedpfx Adjy Eg Dms Aowl

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Bodpjy Exdfsfx Ad Ajwl Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Year of construction: 1994, condition: ready for operation (used), Euromac Digibend 360 Capacity: 36 Tons Bodpfx Adoy Ducnj Aswl Stroke: 250 mm Tooling available optionally at extra cost We also supply new Euromac Digibend machines, notching machines, press brakes, press brakes with robots, and punching machines. For any questions, feel free to contact us without obligation.

Condition: excellent (used), Schröder ASK segmented folding machine The machine is equipped with: ✅ a foot pedal for single-operator control ✅ segments in the upper beam, lower beam, and bending beam ✅ segment height of the upper beam: 11 cm ✅ bending capacity: 1 mm steel sheet Condition: Bjdpjy Dz Siofx Ad Aowl • with new dampers in the upper and bending beams • very good technical condition • very good visual condition • Immediately available, no lead time • Weight: approx. 500 kg Inspection and test run possible by appointment.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, REBAR BENDING MACHINE B 50 / Demonstration unit - CE marking - Year of manufacture: 2025 - Foot switch - Fully equipped machine with extensive accessories - For technical specifications, see data sheet Dimensions (LxWxH) 1.4x1.3x1.5 meters / Weight 450 kg Bwedpfoy Efukox Ad Ajl Errors and omissions excepted

Condition: good (used), Used press brake / bending machine by Hyllus / Stokfleth Bodpfey A Hfxex Ad Aowl 1320 x 2 mm

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (use of 2 wire spools) Includes Conic-Plus option Bwjdpjy Ed Enofx Ad Ael Includes Fast-Threading option Includes Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has been thoroughly cleaned, overhauled, and extensively tested. A laser measurement of the axes was performed in-house. We are happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine Optional services we offer: - Transport - Commissioning - Chiller - Clamping devices - Consumables

Condition: used, functionality: fully functional, Year of construction: 2011, Used profile bending machine from SAF Type: DS 60 HP Plus Bwedey Atidopfx Ad Ajl Shaft diameter: 50 mm 3 driven rolls Digital readout with program option 1 set of rolls for flat and box material Year of manufacture: 2011 (delivered 2014)

Condition: used, 1 piece metal circular saw PEDRAZZOLI on pallet Color: as shown in the pictures and upon inspection Bwsdpfjy D I U Dox Ad Ajl Condition: used Storage location: warehouse hall Payment method: advance payment by bank transfer Shipping: collection only from the Ditzingen-Heimerdingen location

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: Bsdpfx Adoxaawgj Ajwl - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Year of construction: 2018, condition: excellent (used), Max sheet size: 1080 x 780 mm Max single product to take out: 450 x 450 mm Min single product to take out: 30 x 30 mm Paper pile height: 40 - 100 mm Bwodpfeu I U N Usx Ad Aol

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption Bsdpfjxabntex Ad Aswl - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, pressure 28 t piston stroke 180 mm diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm weight of the machine ca. 800 kg dimensions ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with Bodpfsqzmgqsx Ad Aewl all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 9108, Offer 26001 Technical Data: - Horizontal and vertical working positions - 3 motor-driven rollers - Hydraulic adjustment of the lower left roller - Pressing force of hydraulic cylinder: 4 t - Shaft diameter: 35 mm - Shaft rotation: 11 rpm - Roller diameter: 132 - 142 mm - Drive: 400 V, 1.1 kW - Bending capacity approx.: - Round tube Ø 800, 60 x 1.5 mm - Flat steel Ø 400, 90 x 15 mm Bsdpsy Dqn Tefx Ad Aowl - Square bar Ø 400, 30 mm - Includes: - Separate control panel with digital display - Foot switch on separate control panel for right / left operation - Standard bending set for flat and angle material - 6 sets of tube rollers: 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx.: 450 kg - Space requirement approx.: W 700 x H 1150 x D 950 mm