Used Mbo K820-4Ktlt for sale (433)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm), towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Braking System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated via reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration / License Plates Germany With DEKRA inspection and certification (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Hot-dip galvanized frame, including passivation “15-year warranty against rust-through” Drawbar: galvanized or black, at the manufacturer’s discretion Kedpszfp Uxsfx Akwsnb Customized transport solution

Condition: used, maximum load weight: 9,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,500 mm, Equipment: ABS, tail-lift, Galliker ST 2A Pass-through loading system, sideboards, LBW camera Internal number for inquiries: 0626536 * Body manufacturer: Galliker * Type: ST 2A * Tare weight: 4,680 kg * Flatbed with tarpaulin * ABS * EBS * 2-axle, air-suspended * Rear view camera * Edscha cover * Underrun protection, aluminum * Drum brakes * Pass-through loading system * Interior lighting * Tail lift: Zepro, max. load 2,000 kg Dimensions (cargo area/loading area) Cargo area length: 7,300 mm Cargo area width: 2,470 mm Cargo area height: 2,500 mm Tires: Knodpfszd Igkox Akwob * Front axle: 435 / 50 R 19.5, air-suspended / 35% * Rear axle: 435 / 50 R 19.5, air-suspended / 35% ----Price: 9,900 EUR + 19% VAT For further questions, you can reach us on the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors and prior sale are subject to change.

Condition: used, mileage: 332,549 km, power: 130 kW (176.75 HP), first registration: 03/2008, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: yellow, gearing type: mechanical, emission class: euro5, loading space length: 5,180 mm, loading space width: 2,480 mm, loading space height: 2,060 mm, Year of construction: 2008, Equipment: ABS, Equipment: * Body/Structure: Beverage body * Böse beverage body * Swing walls left & right * Internal dimensions: 5,180 mm x 2,480 mm x 2,060 mm * Cab: S (short version) * 6-speed transmission * Steel sunroof * Driver’s seat: standard air-suspended seat Technology: * MB Truckline radio * Electrically adjustable and heated exterior mirrors * Rearview camera Safety/Environment: * Telligent braking system with ABS and ASR * Engine brake with constant throttle * Reinforced rear axle stabilizer * Emission standard EURO 4 Miscellaneous: * 1 previous owner * German first delivery * Model update: Atego 2 * Engine: 4.3 L – 130 kW diesel (OM 904 LA) * Permissible gross weight: 10.5 t * Downrated to 7.49 t without technical modification Since 1972, your reliable partner for all aspects of automobiles and commercial vehicles in 28832 Achim, near Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock, including transporters, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special rates. If interested, we will gladly prepare an individual offer for you! Kodpfx Ajyyrzgskwenb Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is desired, we can provide an offer from our partner workshops. Our offer does NOT generally include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners at an additional charge. The information provided in advertisements, on the internet, in price tags, and pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment is subject to separate verification if applicable. Subject to change and prior sale.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Knodpoyq Ricefx Akweb Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: used, letter stencils negative stencils -Letter stencils: negative stencils, extensive range -Type: German medium mirror, large letters numbers symbols -Dimensions box: 465/330/H65 mm -Weight: 8.1 kg Kodpfxou Intge Akwenb

Condition: used, Technical details: pressure: 80 t distance between columns: 880 mm dayligth: 200 mm Table dimensions: 880x300 mm height over floor: 1000 mm distance between columns: 800 mm total power requirement: ca. 12 kW machine weight ab.: 2855 kg space requirements of the machine approx.: T:1,4xB:1,65xH:1,9 m Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x300x90mm) not heatable. Sale as is. Ksdpfxou Icwts Akwenb *

Condition: used, Year of construction: 2015, container length: 25 ft, color: white, overall weight: 16,000 kg, empty load weight: 3,360 kg, loading space volume: 51 m³, loading space width: 2,480 mm, loading space length: 7,670 mm, loading space height: 2,720 mm, machine/vehicle number: 784842 1, JUMBO BDF Swap Body / Swap Box with Roller Shutter Door * Smooth-wall steel box body * Length: 7.82 m * Roller shutter door, fully repaired, fully functional * Interior with keyhole perforated rails, tracks for double-deck beams * Double-deck beams available at extra cost!!! * Plywood floor * 7 tie-down rings per side integrated into the sidewall * Support height: 1.12 m * Support legs without height adjustment * New safety inspection (UVV) * Neutral white, WITHOUT lettering! * Used swap body with signs of use and slight rust * Washed, fully repaired * New safety inspection (UVV)! * Delivery with double-deck equipment possible at extra charge Technical Data: * Length: External: 7.82 m, Internal: 7.67 m * Width: External: 2.55 m, Internal: 2.48 m * Height: External: 2.90 m, Internal: 2.72 m * Loading height at the roller shutter door: 2.55 m Multiple units available Rental from 1 day, long-term rental possible! Knodspcikyepfx Akwjb We always have larger quantities of various manufacturers and models for SALE or RENT in stock!!! Delivery possible nationwide!

Year of construction: 2002, condition: used, Working widths 1800 mm roll surface width 2000 mm Number of rollers 2 St./ea Upper roll Gravur oder Stahl dia diameter of upper rolls 210 mm Heating - upper roll Elektro Lower roll Gummiert dia diameter of lower rolls 300 mm Roller covering - soft rubber 95 °Sh weight 2 t dimensions of the machine ca. 3,0 x 1,5 x 1,8 m Kjdpst An E Rjfx Akwenb Embossing Calender with exchangeable top roll, The following spare rollers are included with the machine: • 1 x steel roll, chrome plated • 3 x engraving rolls, various designs • 1 x spare bottom roll - rubber coated On the outlet side there is a small batch - rising batch winder ATTENION: the electrical control unit is defective, still needs to be replaced, therefore SPECIAL PRICE for self-repair

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, color: white, overall weight: 16,000 kg, maximum load weight: 12,720 kg, empty load weight: 3,280 kg, loading space volume: 50 m³, loading space width: 2,480 mm, loading space length: 7,250 mm, loading space height: 2,750 mm, container length: 24 ft, -Year of construction: 2009-2011 -Manufacturer: Krone and Kerex -Fixed roof -Telescopic support legs -Aluminum roller shutter -Double floor -GVWR: 16,000 kg -Unladen weight: 3,280 kg -Payload: 12,720 kg -Interior dimensions: L=7,250 mm, W=2,480 mm, H=2,750 mm -Floor made of plywood -Interiors made of keyhole panels Several swap bodies always in stock, both Jumbo and Standard Delivery available for an additional charge Financing available upon request Images are sample images Opening hours: Mon.-Fri. 8 a.m. to 2 p.m. or by appointment Price is NET If purchasing multiple swap bodies, the price is negotiable. Knedpfxeqk R I No Akwsb A VAT invoice will be issued upon sale. Location: Im Gewerbepark 11 99441 Umpferstedt

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable 2 wheel chocks + holder Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension Ksdpfxji Riw Ae Akwsnb SAF drum brake axles last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 22,000 kg, overall weight: 29,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,170 mm, total length: 11,700 mm, total width: 2,550 mm, total height: 2,650 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, drawbar plate with interchangeable 2 kingpin, with 2 kingpin positions Outer frame slightly angled with load-lock profile for lashing straps 2 pairs of lashing eyes embedded in the outer frame on the gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the well, 5 tons each 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 outrigger wedges with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell fenders in front of and behind the axle assembly Ksdpfx Aei Ri Hvjkwenb 2 storage boxes made of stainless steel, w=600/h=400/d=500 mm, with polished, lockable door 2 pairs of pole pockets embedded in the outer frame on the gooseneck, internal dimension 70 x 40 mm 6 pairs of pole pockets embedded in the outer frame in the well, 70 x 40 mm Internal dimensions!! Internal width between the poles 2420 mm!! 3 lashing/pole strips in the well, transverse embedded in the floor over the entire width up to the outer frame, approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a cover, half open downwards. For lashing and inserting poles 80 x 80 mm. Pieces of insertable poles W=80/ D=50/ L=1200 mm, hot-dip galvanized Pieces of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, with support beam, at the center of gravity at approx. 500 mm, loadable with 2000 kg over the entire width, at 1000 mm with 1000 kg over the entire width and at 1500 mm with 500 kg over the entire width, including underrun protection with lighting, extendable. 2 pairs of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Storage compartment for insertable poles, open, on the front panel or below the loading area (for 10 insertable poles 80 x 50 x 1200 mm and 4 insertable poles 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering knuckle, with automatic reversing lock via reversing light and additional locking function on the vehicle via a button. Air suspension with raise/lower valve Wheels & Tires 235 / 75 R 17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition via EBS-Canbus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no factory installation. Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via the reversing light 1 LED rotating beacon with holder, swit

Condition: refurbished (used), functionality: fully functional, Herzog Heymann folding unit max. working width 42cm 6 folding pockets Ruler "right" Knedpfx Asvnml Rekwob 24-pin MBO control

Condition: as good as new (ex-display), Exhibition machine - 4-way combination - Robland HX310Pro 4-way combination machine Robland HX310Pro, Ksdpfx Aksvrvpmjwsnb 3 motors, 2 milling speeds for switching, 3 knife planer shaft, format table 1300mm, absolutely new condition

Condition: used, Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Knjdpevi Hh Iefx Akwob Online-Video-Inspection...

Condition: ready for operation (used), Bosch R600B CNC system board. Circuit board, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Kjdji D Ub Nspfx Akwonb

Condition: new, R. & S. Keller control panel for Sinumerik 820 T, unused, 100% functional. Knedpei Ecl Isfx Akwob

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,600 mm, loading space volume: 48 m³, Equipment: ABS, tail-lift, Galliker ST 2A Demountable Body System, Side Walls LBW Internal number for inquiries: 0726632 * Body manufacturer: Galliker * Type: ST 2A LF * Tare weight: 4,680 kg * Flatbed with tarpaulin * ABS * EBS * 2-axle, air-suspended * Edscha canvas cover Knedpfx Akszm Dptewjb * Aluminum underrun protection * Drum brakes * Demountable body system * Tail lift: Zepro, max. load 1,500 kg Dimensions (cargo space/loading area) Cargo space length: 7,300 mm Cargo space width: 2,470 mm Cargo space height: 2,600 mm Tires: * Front axle: 435 / 50 R 19.5, air-suspended / 35% * Rear axle: 435 / 50 R 19.5, air-suspended / 35% ----Price: 9,900 EUR + 19% VAT For further questions, you can reach us on the following phone numbers: We speak: German, English, French, and...? Typographical errors, errors, and prior sale are reserved.

Condition: good (used), Horizon ED-40 Standing Delivery Unit Manufactured by Horizon, Japan. Can be connected to any Horizon folding machine, but also works with Heidelberg, Herzog Heymann, MBO, etc. The device also operates independently of the folding machine. Infinitely variable delivery speed adjustment. Height adjustment. Kedpfjzurzaex Akwonb Package counter with shifter. Format: min 20mm max 110mm

Condition: excellent (used), Width of jaws 125 mm Height of jaws 35 mm Jaw opening max. 260 mm Kodjzwt Slepfx Akwonb MARCELS MASCHINEN AG

Condition: used, Year of construction: 2008, color: blue, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 57 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 3,000 mm, first registration: 06/2008, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41441 Krone, WP 7.7 N3S-CS * Year of manufacture: 2008 * 7.82 (presumably meters) * Used tarpaulin * Fixed roof * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop bar * Portal door * Profiled wooden planks Knsdpozkrfkjfx Akweb * Suitable for rail transport – can be lifted with a crane * Other * Total weight: 16,000 kg * Tare weight: 1 kg * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7700 mm, W=2480 mm, H=3000 mm * Internal volume: 57 m³ * Dimensions of corner brackets: E=5853 mm * Overhang dimensions: 983 mm * Pallet spaces: 19 * Krone WP 77 BDF Jumbo volume interchangeable box * Liftable roof Disclaimer: Subject to changes, prior sale, and errors. More images and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2008, color: blue, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 57 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 3,000 mm, first registration: 06/2008, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Vehicle number for inquiries: 41440 Krone, WP 7.7 N3S-CS * Year of manufacture: 2008 * 7.82 (presumably meters) * Used tarpaulin * Fixed roof * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop bar * Portal door * Profile wood planks * Rail transportable - craneable * Other * Total weight: 16,000 kg * Unladen weight: 1 kg * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7700 mm, W=2480 mm, H=3000 mm * Internal volume: 57 cubic meters * Dimensions of corner fittings: E=5853mm * Dimensions of overhang: 983mm Knjdpfxjzkrfqo Akwob * Pallet spaces: 19 * Krone WP 77 BDF Jumbo volume interchangeable body * Lifting roof Disclaimer: Subject to changes, prior sale, and errors. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transfer of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: used, empty load weight: 8,430 kg, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2026, tire size: 235/75 R17.5-235/75 R17.5, Year of construction: 2023, ref: 54781 Equipment: * Side impact protection, * Tool box: 4, * Rear door design: rear portal doors, * Locking rods on rear doors: 4, Ksdpfozmivxjx Akwsnb * Sliding cover, * Side sliding tarpaulin, * Lifting roof, * Floor: plywood floor, * Recessed strip (aluminum): 40, * Air connection: Other: Yellow / Red + Duomatic, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS VIN: WFDFLT33901013129 Tire size: 235/75 R17.5 Internal length: 14.8m Width: 2.55m Internal width: 2.46m Height: 4m Internal height: 3m

Condition: used, empty load weight: 7,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2016, next inspection (TÜV): 06/2027, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: green, Equipment: ABS, Drum brake EBS (Electronic Braking System) Payload 32,000 kg Air suspension with lift function Floor 8 mm - Wall 6 mm SAF axles Alcoa aluminum rims Roll-over tarp Platform Foldable underrun protection Hydraulic rear gate with pivoting function Kedpszk Epiefx Akwenb Errors and omissions excepted.

Condition: new, Layout: Backhoe Ksdpfxopa Rp Ao Akwenb Selling price: € 2.500, US$ 2.678 For special purposes LONG REACH BOOM-ARM DEMOLITION BOOM DEMOLITION ARM DREDGE BOOM-ARM Pries are representative. For detailed information, please contact us

Condition: used, Year of construction: 2012, operating hours: 8,600 h, functionality: fully functional, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness copper (max.): 5 mm, For sale: Combined sheet metal and tube laser cutter BLM ADIGE-SYS LT COMBO. This machine is designed for both sheet, tube, and profile cutting in a single system – an ideal solution for versatile and flexible production. The machine is connected and fully operational; it can be inspected and observed working in real time. Single owner. Full service history available, the machine has been regularly maintained with annual servicing. Manufacturer: BLM Group Model: ADIGE-SYS LT COMBO Year of manufacture: 2012 Technology: Fiber laser Source: 3 kW LT Combo Tube and profile cutting diameter: 16 – 225 mm Tube input length: 6.1 m; output length: 6.1 m Cuts to zero – leaves no remnants Sheet table: 1500 x 3000 mm Cutting capacity: ALU 10 mm; Stainless Steel 12 mm; Brass 5 mm; Steel 20 mm Laser cutting hours: 8,600 h (as of 2026-02-27) Total machine hours: 72,000 h (as of 2026-02-27) Other: spare laser cutting head included Knodpfxsyaavdo Akwjb If you have any further questions, we would be happy to assist you.