Used Meber Mod. Sr 600 for sale (16,535)

Condition: used, CTS   Type: T-40/600 /011232   CTS Temperature Testing Chamber, Water-Cooled   Including metal supports to increase the floor load capacity   Test chamber volume: 600 liters   Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm   External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm   Temperature operating range:   Temperature range -40 to +180°C   Temperature deviation ±0.1 to ±0.3 K over time   Heating rate: 2.5 K/min Cooling rate: 3 K/min   Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A   Weight: 550 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We will gladly answer any further questions you may have by telephone. Ledpfx Asziyw Sjmzjhn

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 11,276 h, load capacity: 3,500 kg, lifting height: 5,950 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,800 mm, battery voltage: 80 V, fork length: 1,200 mm, overall weight: 4,752 kg, Equipment: cabin, lighting, Serial No.: 516367X00016 Hours: 11,276 h Load capacity: 3,500 kg Mast type: Duplex mast Lifting height: 5.95 m Overall height: 2.8 m Fork length: 1.2 m Dual auxiliary hydraulics Full cabin with heater Battery with charger, year of manufacture: 2020 Lhodpfjx Hquxox Amzjn Blue Spot Lighting: 3 work lights at the front, 6 at the rear Windshield wipers: front, rear, top Radio

Condition: used, Weiss   Type: WK3 600/0-M   Weiss Climate Test Chamber, Water-Cooled Type series WK3-../0 with SIMPAC* control system   Test chamber volume: approx. 600 liters   Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm   Data for operation:   Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Fuse (on customer's side): 16 A, slow-blow Protection class, control cabinet and operating panel: IP 54 Max. heat dissipation to environment: 1200 W   Sound pressure level approx. measured at a distance of 1 m from the front, 1.6 m high: 46 dB(A)   Data for temperature tests: Temperature range: -5°C to +90°C   Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 K   Temperature gradient (according to IEC 60068-3-5) Temperature change rate Heating: 0.6 K/min Lhsdoziywrspfx Amzon Cooling: 0.3 K/min   Heat compensation at +20 °C to +50 °C: 200 W   Data for climate tests:   Temperature range: +10°C to +90°C Dew point range: 4 to +89.5 °C Humidity range: 10 to 98 % RH Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Humidity deviation over time: +1 to +3 % RH   Refrigerant: R-404A   Weight: 610 kg   For your security as a buyer, please note the following information!   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers will be subjected to a test run, which will be monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W Lhsdpfx Amezimg Hszjn 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Lhodpfxjzh Htwe Amzsn Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2004, Centerless grinding machine manufactured in 2004. This HERMINGHAUSEN SR 2 W features a grinding wheel circumferential speed of 35 m/sec and is equipped with a Lenord+Bauer control panel with a digital display. It includes a coolant and filtration tank system, along with a part feed chute/guide. If you are looking to get high-quality grinding capabilities, consider the HERMINGHAUSEN SR 2 W machine we have for sale. Contact us for further details. - Grinding Wheel Circumferential Speed: SUG=35m/sek.- Voltage / Current / Frequency: 400V / N / PE / 50 Hz- Rated Current: 25 A- Control / Panel: Lenord+Bauer control panel with digital display / SFS upgrade- Equipment: Coolant / filtration tank system, part feed chute/guide Lodpfxez Sp Uke Amzjhn

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: Ljdpsgw Sxzefx Amzjhn • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SR1477, overall weight: 385 kg, volume flow: 650 m³/h, operating pressure: 40 bar, final pressure: -0.93 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 42 A, type of input current: three-phase, type of cooling: water, rotational speed (max.): 1,750 rpm, warranty duration: 3 months, protection type (IP code): IP54, The TRHC 80-600 has a capacity of 650 m3/h. The 180L-4 electric motor is a suitable drive for the pump. The pump was overhauled in 2025. Free shaft end, without motor and coupling. Parts replaced during refurbishment: new shaft seal, new bearings. Wear plates and impeller re-machined. Pump housing and machine components fully surface-treated and coated. Lsdpjy Hf Imjfx Amzohn

Condition: excellent (used), operating hours: 2,899 h, mast type: telescopic, fuel type: diesel, General information Year of manufacture: 2018 Drivetrain Drive: Track Make of engine: Yanmar Weights Empty weight: 7.550 kg Functional Lifting capacity: 250 kg Working height: 1.400 cm CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Emission level: Stage V / Tier IV final Delivery terms: EXW Max. horizontal reach: 1200 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-09-01 Production country: JP Additional information Lhodpjz Hihfsfx Amzen Please contact Martyn Joosse for more information

Condition: used, Bosch Turbo Scara SR8 Swivel Arm Robot Manufacturer: Bosch Order No. 3842999836 Lhsdpeg D Tu Ijfx Amzjn Serial No. 3810333 Stroke*Spindle 400*25 PN pressure max. 8 bar Load max. 8 kg Weight 51 kg Swivel range, see image Mounted on an aluminum profile base frame. Item condition: used All robots were kept as backup replacement machines in the warehouse of a large automotive supplier, and are therefore in very good condition. In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc., are available. Workshop equipment, workbenches, workshop trolleys, tools, and forklifts are available in abundance. A total of 24,000 m² of production space will be dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 working days. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 Ljdpjiq U A Sjfx Amzehn ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: used, Year of construction: 1984, Roller diameter: 600 mm Lodpfx Amszb N Tuszjhn Blade width: 25 x 6/10 mm Max. cutting height: 295 mm Cutting width: 580 mm Table height: 940 mm Table size: 860 x 600 mm Max. blade length: 4580 mm Stand side on the left Belt guide on the top and bottom Table can be tilted with parallel stop Motor: 2.2 kW Dust extraction connection diameter: 100 mm Dimensions: 1210 x 750 x 2077 mm Weight: approx. 350 kg Location: Nattheim

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Location: Nattheim. Lsdpfx Aey R Tqksmzshn

Condition: new, INA K811/600-M axial roller bearing, serial number A640, outer dimension 70.5 cm, inner dimension 60.5 cm, unused, in opened original packaging, 100% functional. Scope of supply as shown in the photos. NOTE: Please request a separate quote for packaging and shipping costs! Lhedpsi Ea Unjfx Amzon

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Lhedpfx Aszxup Iemzsn Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, total height: 2,950 mm, total length: 2,500 mm, total width: 2,610 mm, overall weight: 7,000 kg, operating hours of spindle: 10,902 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron HEM600 Year of manufacture: 2013 Control system: Heidenhain ITNC 620 Spindle hours: 10,902 X-axis: 650 Y-axis: 530 Z-axis: 600 Rapid traverse: X, Y 30 m/min, Z 24 m/min Maximum spindle speed: 9,000 RPM Tool holder: SK40 Tool magazine: 30 positions Lodpfx Amez Uxiiozshn Chip conveyor Handwheel Coolant nozzle Connected power: 16 kVA Clamping area: 850x560 mm Dimensions: approx. W=2,500 mm / D=2,610 mm / H=2,950 mm Weight: approx. 7,000 kg In very good condition / without clamping devices! Inspection possible at any time while the machine is powered on. Available from approximately the end of November 2026. Upon request and for an additional charge, we can disassemble the machine and load it onto a customer-provided transport vehicle.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,018 h, load capacity: 5,000 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,521 mm, fork carriage width: 1,350 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Lhjdpfjz Rrm Tjx Amzjn Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, work light (rear), work light (front), heater, soot filter, full cab, interior mirror, plastic seat cushion, dust protection, double pedal

Condition: used, Bosch Turbo Scara SR6 Articulated Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideally suited for assembly work and fast pick & place operations. The TurboScara SR6 and SR8 are articulated arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and various stroke lengths Lhedpfx Asivd Rqomzsn • Defined mechanical interfaces • PC control with diverse communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is easy to learn and allows the creation of clear and understandable programs; new with BAPSplus: graphical program interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Technical data: Rated load: 2 kg Maximum load: 8 kg Rated moment of inertia: (Axis 4) 500 kgcm² Maximum moment of inertia: (Axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/max 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Mounted on an aluminum profile base frame. Item condition: used All the robots were kept as spare machines in the warehouse of a large automotive supplier, so they are in very good condition. In addition to approximately 50 paternoster storage systems, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, and forklifts are readily available. A total of 24,000 m² of production space is being dismantled and sold. Please also note our other offers. Payment is due within 7 working days after purchase. You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Bosch Scara SR 800 Swivel-Arm Robot Manufacturer: Bosch Order No. 384291811 Serial No. 54400094 Maximum load at the gripper flange: 5 kg Stroke of the 3rd axis: 480 mm Pneumatic pressure: 4-8 bar Weight: 100 kg Lhedpehtyznjfx Amzen Swivel range: see diagram Mounted on an aluminum profile base frame. Item condition: used These robots were all used as backup machines in the warehouse of a large automotive supplier and are therefore in very good condition. In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool carts, tools, and forklifts are plentiful. In total, 24,000 m² of production space will be dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 working days. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: used, Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch PN pressure max. 8 bar Load max. 8 kg Robot weight 51 kg + Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data, see image Since the item is available in multiple units and the robots have different working tools, the images are only examples and may vary. Item condition: used (Changes and errors in the technical data and information are subject to change!) In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool carts, tools, and forklifts are plentiful. Ljdpfx Amohbhyuezshn In total, 24,000 m² of production space will be dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 working days. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Diskus Werke DSH 600/1000 Surface Grinding Machine This machine type is a machine with a motor-driven grinding spindle. The workpieces are clamped and ground using clamping devices adapted to the specific task. The devices are attached to the machine bed. The column carriage, on which the motor spindle is mounted, serves as a feed, dressing, and oscillating slide. Lodpfxjhtyude Amzshn Manufacturer: Diskus Type: DSH 600/1000 Operating voltage: 380 V DC voltage: 24 V Control voltage: 220 V Rated power: 27 kW Rated current: 56 A Year of manufacture: 1964 Condition: used You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Lhsdpfxoikq Tyo Amzsn Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: used, This listing is for 1 of 3 Hamilton Microlab 600 series dual syringe dispenser The units are in full working condition and ready for immediate use General Description The Hamilton Microlab 600 Series Dual Syringe Dispenser is a semi-automated liquid handling system designed for laboratories requiring high-precision, high-accuracy fluid transfers. Built on Hamilton’s world-renowned syringe technology, it leverages positive-displacement mechanics to ensure consistent performance across a broad range of fluid viscosities and characteristics. Semi-Automated Liquid Handling With a simple touch of the hand probe button or an optional foot switch, users can actuate the dual precision syringe drives to aspirate or dispense exact fluid volumes. This ergonomic control reduces hand fatigue and enhances repeatability in routine workflows. Precision by Design Microlab 600 diluters and dispensers achieve precise and reproducible results through positive-displacement syringe drives that are independent of fluid viscosity, vapor pressure, or temperature. This makes the instrument highly suitable for complex or sensitive fluid-handling tasks such as: Serial dilutions Titrations Ledjxhfztjpfx Amzohn Standard preparations Reagent distribution Sample aliquoting

Condition: used, This listing is for Genomix GCG-SR-1 10X Next Gen Single Cell Controllor The unit is in full working condition and ready for immediate use Ledpozghrlsfx Amzjhn This advanced single cell controller provides precise fluidic control for high-throughput genomic sequencing and analysis workflows Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Ledpszk D Dxsfx Amzjhn Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.