Used Metkon Ag K0117 for sale (6,174)

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 Iedpsr Ix Igjfx Apceia 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Year of construction: 2025, condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine - programmable with 7" touch screen operating panel with SIEMENS-PLC control - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis Iedpfx Aecw Ipaspcsia - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Year of construction: 2025, condition: as good as new (ex-display), With 250 mm diameter of grinding wheel - new equipment / demo unit for special price - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: - basic machine disc diameter 250 mm - 250 mm platic grinding table - splash guard Iisdpfx Aoptc Djpcea - disc cover - connections for cooling water & water drain Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request offer not binding - subject to prior sale

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle Iodpfxocwamxo Apcoia • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Delivery including a test equipment consumables consisting of: Iiods Ebqnepfx Apcja * Assortment of 20 cutting discs * 5 litres METCOOL coolant Option: Machine base cabinet

Condition: used, Year of construction: 1994, machine/vehicle number: 1232, functionality: fully functional, type of input current: AC, workpiece width (max.): 400 mm, workpiece height (max.): 260 mm, total height: 2,550 mm, total length: 23,000 mm, total width: 7,200 mm, overall weight: 14,000 kg, table width: 400 mm, air pressure: 8 bar, space requirement height: 2,550 mm, space requirement length: 23,000 mm, space requirement width: 7,200 mm, Sales Description: Hundegger ABM-B P10 Joinery Line + HMC Planing Machine Manufacturer: Hundegger Model: ABM-B P10 incl. HMC Year of manufacture: 1994 Condition: Used, fully operational Location: Germany Technical Specifications: Processing range: Up to 260 x 400 mm Saw unit: With block separator and open base Milling units: Notch milling unit with right/left milling head Half-lap milling unit with right/left milling head Finger milling unit Vertical milling unit (ø 300 x 100 mm) Drilling units: Vertical drilling device Horizontal drilling device Rafter nail drill Chain mortiser: Isdexrbizopfx Apcsia Vertical top/bottom with automatic chain lubrication Horizontal with combination unit Additional equipment: Marking device at the stop Positioning chain feed Horizontal cross conveyor (2.2 m) Transfer cross conveyor (2.9 m) Ejector with storage supports Scraper control Planing Machine HMC (included): Year: 1994 4 feed motors 4 planing motors (7.5 kW) 4 bevelling motors Automatic centering unit Special Features: Fully automatic processing of single and series parts Control: PC-based with carpenter-friendly graphical interface + USB stick as floppy drive (BV transfer) Machine inspection under power possible Notes: All documentation available Self-collection only, ex works, without overhaul No warranty or guarantee Subject to prior sale

Condition: new, Year of construction: 2025, functionality: fully functional, ASB length stop with digital display Isdpfxoxu Iaxs Apcjia Measuring range: 1,000 mm / 1,500 mm / 2,000 mm / 2,500 mm / 3,000 mm ... up to 6,000 mm Manual length measuring device with battery-powered digital display and fixed end stop. Right-hand mounting (left-hand option available) Measuring accuracy: ±0.1 mm Total length: Measuring length + 350 mm LCD display permanently integrated Display powered by batteries with an approximate service life of 1,000 hours in continuous operation Minimal installation effort required Freely configurable set values Switchable between absolute and relative measurement modes

Condition: new, Year of construction: 2025, functionality: fully functional, GMF Caliper Complete Set 2,500 mm, 3,000 mm, or 4,000 mm 1.) Base length: 1,500 mm or 2,000 mm 2.) Plus extension: 1,000 mm, 1,500 mm, or 2,000 mm Includes charger and receiver. The robust aluminum measuring rail is ideal for measuring glazing beads. Functionality: For use on doors and large window sashes, the GMF caliper can be safely and quickly extended mechanically up to a measuring length of 4,000 mm. - Automatic detection of extension Accuracy: ± 0.1 mm Resolution: 0.02 mm Measurement transmission via wireless interface to control unit or PC Microcontroller charger for battery pack, 100-240 V input voltage, and power adapter for Euro/UK/US/AUS NOTE: Ijdexu Hyqepfx Apceia 1.) HECHT receiver software required on the customer's PC – available separately upon request. 2.) Can be retrofitted to HECHT Exenso Comfort length stops from year of manufacture 2016 onwards – available separately upon request. 3.) Can be retrofitted to HECHT DS350 double miter saws from year of manufacture 2018 onwards – available separately upon request.

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min. Iiedevcyw Aepfx Apcea

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm Iiedpfxowrp Hke Apcsa The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free.

Condition: used, US-2100 - 75 mm Iijdjwrp Injpfx Apcoa Increasingly wider bands are being demanded for the logistical and sales-promoting bundling of units. The US-2100 with its unique ultra-sonic sealing processes paper and plastic bands with a width of 75 or 100 mm. The bands offer plenty of space for printing marketing-related information. The machine is easily accessible, usable in small spaces, and offers high safety.

Year of construction: 2011, condition: used, For sale are three used vertical centrifugal free flow pump from Emile Egger Pumpe & Co. AG from the year 2011. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Number: T 214050 and T 214050 Year of construction: 2011 L/s: 2,77 1/min: 1800 m: 14,7 Connections: DN50 and DN65 length: 192cm Quantity: 3 Motor data: Manufacturer: VEM motors GmbH Year of manufacture: 07/2011 Type: IEC/EN 60034-1 Number: 186889/0003, 186889/0001H and 186889/0002H Iedpfx Apjga Drqocjia kW: 5,5 HP: 7,5 V: 400 A: 10 1/min: 1470

Condition: like new (used), Year of construction: 2017, 1.0 unit used IML system – system with removal unit, placement on conveyor belt for horizontal stacking Iiodpswuln Nefx Apcoa Manufacturer: Beck Automation AG Type: B32 Year of manufacture: 2019

Year of construction: 2004, condition: refurbished (used), Precision feed for tapes up to approx. 100mm to 2mm Iiodpfx Aeg Iiuxopcoa Feed force 400 N Repeat accuracy +/- 0.04 mm

Year of construction: 2018, condition: as good as new (ex-display), Belt width max. 140 mm Strip thickness up to 1.5 mm Accuracy +/- 0.05 mm Iedpfx Aecn Dv Nepcsia Tensile force 500 N ( 50 kg).

Year of construction: 2023, condition: like new (used), width 600 mm accuracy 0,04 mm force max 3000N Iiodpfx Apslczm Iocja waranty 2 Years

Year of construction: 2020, condition: as good as new (ex-display), plasma nitrided rolls 64 HRC, max sheet thickness 3 mm, max. width 120 mm, repeatability +/- 0,06 mm at 50 mm feed 350 HUB/ min. 180° clearance angle Isdpeg Ew Ixjfx Apcsia

Condition: excellent (used), Year of construction: 2000, HAUG Sauer Compressors AG High-pressure piston compressor with associated pressure vessel and control cabinet Type: QTOX 120/65/35 WM-W Max. final pressure: 66 bar Volume flow: 50m³/h Nominal power: 18.5kW Nominal speed: 1450min Voltage/frequency: 400/50V/Hz Iijdpfx Apski Tzujcsa Year of construction:2000 Maschinen- und Behälterbau GmbH High pressure tank up to 65bar Type MB 00320-2,10 1000 liters Year of construction:2017

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, STOCK MACHINE: Working direction from left to right – Subject to prior sale – HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 – 1055 mm - Raw bar length from min. 400 mm up to max. 6,000 mm (optional extension kit available for up to 6,500 mm) - Material supply via chain conveyor for fully automated 9-compartment loading - Working direction from left to right Professional Cutting Saw: - Automatic bandsaw with pneumatic clamping system, consisting of 3 clamping elements - Infinitely variable saw feed via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is secured at the front by a light curtain. - Bandsaw drive: 1.5 kW, frequency-controlled - Bandsaw dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in regulated operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 – 820 mm (Note: not adjustable independently from working height) - Part outfeed via powered roller conveyor with steel rollers - Roller-guided ejection unit across three levels onto inclined discharge table - Maximum part length via automatic outfeed: 3,500 mm (optional extension kit available for working length up to 4,500 mm) - Scrap disposal via ejection unit – max. length 600 mm - Scrap pieces discharge via chute into customer-provided waste container (Note: waste container not included) - Remnant identification indicated at placement position for manual collection by operator Iiodpfxoxft I Aj Apcsa Software / Data Interface: - HECHT Exenso ESA software (version specified after joint pre-acceptance) Operation: - Reinforcement bars are loaded onto the feed magazine in the infeed section by the operator according to specifications/display. - Transmission of the required cut lengths for the PVC cutting center from customer’s window manufacturing software via integrated data interface - Steel is automatically conveyed and fed - Optimized cutting to the specified lengths - Transport of steel to the pick-up position in the outfeed section - Optionally, double cuts can be made upon inspection Scope of delivery: - Bandsaw - Infeed conveyor - Outfeed conveyor - Light curtain - Control system with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The system is disassembled into several packages for transport Includes: 540.1082 1x Guard fence wall connection set with door switch ESA/SSA, usable right or left; 723.5011 1x bandsaw blade M42 3320x27x0.9 12-16 TPI, fine; 942.5541 1x minimum quantity lubrication for ESA & SSA saw systems – significantly extends bandsaw blade service life; Includes: minimum-quantity lube nozzle, 1L lubricant, holder for lubricant, filter for protection against contamination; 829.0201 1x additional buffer monitor for steel terminal ESA/SSA, additional display.

Condition: new, Year of construction: 2025, functionality: fully functional, Exenso Comfort Automatic Length Stop • For use on cross-cut saws, drilling machines, punching presses, and more • Automatic positioning of the material stop Iiedpoxmh Uysfx Apcea • Stop and pusher modes available • Network-capable control unit with numerous software options and interfaces Ideal as an add-on to customer-owned saws or as a component in complete saw systems. Different adjustment lengths available – short delivery times! Customizable interfaces and software extensions possible. Contact us!

Condition: new, Year of construction: 2025, functionality: fully functional, Stock machine: Subject to prior sale - Glass bead saw / double mitre saw Exenso DS350 - 3,000 mm for wooden glass beads, glazing bars, profile strips, aluminium trims, etc. Swivel range from 22.5° (internal) to 135° (external) Right-hand head is movable. Saw blade holder Ø 350 mm Working length 3000 mm - Includes 1 central support. - Pneumatic clamping of the units. - Positioning control Exenso DS3 with touch panel - 15" display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swing axes. - Manual input of cutting data - Processing of data from a cutting list (data records as specified) - Processing of measuring gauge data (wireless GMF caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor and software licenses. Iiodpfsw Exaaox Apcsa 1.2 723.0121 DS/ES saw blade for wood, 2 pcs. 1.3 942.5997 DS Pneumatic feed device, 1 set 1.4 942.5236 DS Combined workpiece clamp, 2 sets 1.5 942.5241 DS350 Grooved table supports, 1 pc. 1.6 945.1022 DOCUMENTATION AND USER INTERFACE DEU or ENG

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 01/40360/1117, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Factory-refurbished measuring table SN 01/40360/1117 (year of manufacture: 2017) – Subject to prior sale - Operating system: Windows 10 For measuring external dimensions and one-sided inspection of vertical and horizontal boreholes in panel-type workpieces. APPLICATION AREA: Iiodpfow Ev N Ssx Apcja Setup assistance: Measurement of first-off sample parts Random inspection: Measurement of sample pieces MEASUREMENT CRITERIA: Dimensions: Length, width, angles Borehole, vertical: Position, diameter, depth, borehole distances Borehole, horizontal: Position, diameter, depth, distance to the panel surface (NOTE: Test pins or inserted dowels are required) Groove: Edge distance, width, depth Radius: Center position, radius Rebate: Width, depth Cutouts: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: Measurement of vertical and/or horizontal boreholes as well as grooves and rebates on the Y-axis is possible up to 1,150 mm position) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/-0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy – independent of daylight) Measuring surface: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor level: approx. 1,000 mm +/- 50 mm Required space (L/W/H): approx. 5,000 mm/ 2,000 mm/ 1,700 mm Weight approx.: 2,400 kg + control cabinet including operator panel approx. 200 kg Total electrical connected load: 2,500 W Compressed air connection: 6 bar Operator side: left Operating voltage: 230V/16A (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: For higher temperatures, a climate control unit in the control cabinet is recommended – available as an option.) Technical changes reserved. The above performance data assume suitable workpieces are used. Scope of delivery: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x CAD4U software license and HECHT interface for measurement program creation on a PC in work preparation ⦁ 19” PC with CAD4U software license and interface for measurement program creation, current software version Results and Driver for program execution, image processing software ⦁ Camera, lens, and lighting for image capture ⦁ Operating system: Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring lateral boreholes: 10 pcs each with a diameter of 5, 6, 8 mm ⦁ 4 x corner angles for black parts ⦁ SQL Express database installed on the machine PC Languages: The operator software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian, and Chinese. Additional languages available on request. SAFETY AND PROTECTION DEVICES Emergency stop switch unit All machines for EU member countries with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be fully enclosed with a safety fence. This and other safety devices are not included in the delivery.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,500 mm, measuring range Y-axis: 100 mm, measuring range Z-axis: 65 mm, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15" touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeat accuracy X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeat accuracy Z +/- 0.02 mm Resolution 0.01 mm Measurement capabilities: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Squareness Iodpfx Ajw Ew Dqepceia ⦁ Parallelism ⦁ X/Y hole positions ⦁ Bore diameter ⦁ Bore depth (relative) ⦁ Radii / diameters ⦁ Groove position ⦁ Groove depth (relative) ⦁ Rebating position ⦁ Rebating depth (relative) ⦁ X/Y/Z position of horizontal boreholes ⦁ Depth of horizontal boreholes (relative) Measuring program: 8-point measurement for rectangular parts (e.g. rectangle, parallelogram, or trapezoid) Process: 8 points of the workpiece are scanned (two points per edge at each corner) Result: Displays 2 x length (top, bottom), 2 x width (right, left), 4 x angles Report: When nominal values and tolerances are entered, an actual/target comparison is generated and deviations are displayed in tabular form. Results can be saved as PDF (report) or in an SQL database for statistical analysis. Inspection and documentation of manufacturing status possible during the production process: after cutting, after edge-banding, or after drilling, depending on value creation. Vacuum system (Venturi principle): 6 vacuum suction cups integrated in the measuring field secure the workpiece during measurement. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power supply: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/control: 15" touchscreen HECHT DesQ II software Windows 10

Condition: like new (used), Laser engraving, laser marking, laser welding, laser structuring, etc. 2x Ø 50 mm available on the roof side Mobile storage device Very quiet operation Iedpfx Apjrypcdscoia Simple filter handling, modular design Operating elements on the front Powder-coated, robust housing Installation of extraction arms Volume flow control: stepless adjustment of the suction power Particle filter occupancy indicator: visual signaling SUB D9 interface: standard equipment, remote I/O, operating message, 100% filter Dimensions W x D x H: approx. 1400 x 1200 x 2000 mm Weight: approx. 35 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6860 0007, Please let us know your quote. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carrier Machine specifications: 5-axis grinding center including oval feed belt and loading gantry 12-station tool changer with HSK 63 Max. X-axis travel: 500 mm Max. Y-axis travel: 650 mm Max. Z-axis travel: 650 mm Table size: 500 x 650 mm Cut-off detection Iedpfx Apevbgiiocoia Nordmann dressing spindle Oil supply via central factory supply