Used Mikron Um 600 for sale (16,233)

Condition: used, Weiss   Type: WK111-600   Weiss Climate Testing Chamber, Air-Cooled   Performance data for temperature tests:   Temperature range: -5°C – +90°C Kdjdpfxsziyxcs Ag Asu Temperature fluctuation over time: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min   Performance data for climate tests   Temperature range: +10 to +90°C Humidity range: 10 to 98 % RH Temperature fluctuation over time: ± 0.1 to ± 0.3 Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Humidity fluctuation over time: ± 1 to ± 3   Test chamber dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left 1 feedthrough ∅ 125 mm, installed on the right   Power supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 KW Rated current: 10.0 A Refrigerant: R 404 A 600 liters Weight: 540 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have on the phone.

Condition: used, PVC runner, size 10000 mm x 600 mm x 5 mm, grey PVC · For assembly workstations and conveyor lines · Resilient, closed, and profiled work area covering made of soft PVC · Insulates against cold floors · Ventilation and drainage through structured underside Kdsdpfx Agsz Tg T Ho Aju · S

Condition: used, Dump truck, capacity 600 liters, L1458 x W855 x H1099 mm, anthracite gray, without drain valve. · Tilting, bearing-mounted container made of 2 mm sheet steel · Top edge folded over twice Kdjdpoz Th Sdsfx Ag Aju · Spillage edge double-folded and welded to be oil-tight · Subframe made of 3 mm edge profiles, with integrated

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm Kdodpez Sqf Rofx Ag Aju • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: used, - Top quality from West Germany - Equipped with carbide tips Kdsdsz Unm Ropfx Ag Asu - Featuring diameter-dependent expansion slots - With chip deflector 42 LWZ - For making long and cross cuts in all natural woods; wood-based panels (also veneered on one side or coated with plastic on one side)

Condition: used, Shelf unit, B2600xT800mm, load capacity 600kg, steel panel, silver coated, for wide-span shelving Kedpsz Uxg Ujfx Ag Ajdu · Complete with upright frames · Shelves with steel panels · Shelf load, max. 600 kg (with evenly distributed load) · Bay load, max. 4600 kg (with evenly distributed load)

Condition: used, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC plastic - Special design for wood chips, etc.: Lateral, internally positioned skirts prevent the conveyed material from getting under the belt - Crossbars of the belt, H=60 mm - Belt length 8000 mm - Belt width 600 mm Kdodpfx Aez T Tuwsg Aeu - Electric motor located at the top of the conveyor belt for improved power transmission - Chassis with pneumatic tires, Ø360 mm - Height adjustable via hand winch - Minimum conveying height with 8 m belt length: approx. 2.68 m - Maximum conveying height with 8 m belt length: approx. 4.34 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible translations at no extra charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min

Condition: used, Multi-purpose mirror, D.600mm, plastic, white, for 2 directions, 11m SPL · for indoor and outdoor use Kdsdsz T A T Aopfx Ag Asu · for observing production processes and workplaces, blind spots and corners · for monitoring two directions · approx. 90° viewing angle · mirror made of

Condition: used, Shelf for bolt-on shelving system, 1300 x 600 mm, load capacity 230 kg, steel sheet, light gray, powder-coated, 2 pieces/carton Ksdpfxsz T D I Io Ag Aodu · For universal use · Base for custom-designed shelving systems in combination with angle profiles · Other technical features: Design: for bolt-on shelving

Condition: used, Whiteboard, B900xH600mm, enamel white, magnetic, with aluminum frame. Ksdez T Dv Ejpfx Ag Ajdu · For professional use · Ideal for information planning in the office, school, etc. · With a sturdy aluminum frame and rounded plastic corners. · White, enameled writing surface.

Condition: used, Multimeter MM 5-2, 0.1 mV - 600 V AC/DC TRUE RMS, BENNING · With illuminated 4-digit LCD display (6000 counts) · Microampere measurement ranges (400.0 µA DC / 4000 µA DC) · Continuity test with red LED and buzzer · Diode test · Integrated voltage sensor signals phase voltages and cable breaks in lines without contact (visually) Kdsdpfxez Tptpo Ag Asu · Single-pole phase test · Automatic range selection · Automatic shut-off · Measurement value hold (HOLD), peak value memory (PMAX/PMIN), relative measurement (REL) · Measurement category CAT IV 300 V, CAT III 600 V · Measurement ranges: DC voltage: 100 µV - 600 V, AC voltage: 100 µV - 600 V. DC current: 0.1 µA - 10 A, AC current: 1 mA - 10 A, Resistance: 0.1 Ω - 40 MΩ. Frequency: 0.01 Hz - 50 kHz, Capacitance: 0.01 nF - 1 mF, Temperature: -40 °C to +400 °C · Other technical features: Width: 77 mm · Length: 150 mm · Height: 44 mm

Condition: used, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Low-noise operation and smooth running In the lower range of pressure tank sizes, up to 200 liters, they are available in either mobile or stationary versions. for mobile versions in the pressure tank range of 50 - 200 liters: • Check valve • Relief valve • Pressure gauge • Safety valve • Condor pressure switch • Quick-release coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure tank range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Pressure gauge • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug • Relief valve from 5.5 kW motor power: • automatic star-delta starter for wall mounting • Solenoid valve with silencer Intake capacity l/min 625 Delivery rate l/min (at 7 bar) 470 Motor power kW 4.0 Rated voltage V/Hz 400/50 Compressor speed min 860 Max. pressure bar (gauge) 15 Tank capacity l 300 Stages 2 Weight kg 240 Dimensions l/w/h in mm 1,350/700/1,360 Kdedjz Tyk Eopfx Ag Aou

Condition: used, Shelf for bolt-together shelving, 1000 mm (W) x 600 mm (D), load capacity 100 kg, steel, silver-coated, 6 pieces/box. Kdodpfjz Tylpox Ag Aju · For universal use · Base for customized shelving in combination with angle profiles · Other technical features: Design: for bolt-together shelving

Condition: used, Lifting magnet Maxx, lifting capacity 600 kg, overall height 189 mm, with manual operation. · Manually operated · Lifting capacity¹: 125 - 2000 kg Ksdpsz Txkdsfx Ag Aedu · Compact and lightweight design, facilitates daily handling · Robust and reliable · Simple and safe lifting of ferromagnetic materials.

Condition: used, Translation 4;1:1; Cable fitting: 4 mm - 41 m; 8 mm - 9 m. Kodpfx Aez T H A Ijg Aodu

Condition: used, Industrial mat, size 10000 mm x 600 mm x 12.5 mm, finely milled, black/yellow PVC * Black with yellow safety stripes Kodpjz T Dd Aofx Ag Aedu * Made from 100% recycled PVC, resulting in an exceptionally good price-performance ratio * Good slip resistance in the workplace due to the ribbed surface

Condition: used, - for rough cutting of firewood and construction lumber Kdedpfx Agez Tri Hj Aeu - NAIL-RESISTANT

Condition: used, Shelf for bolt-together shelving, 1300 mm (W) x 600 mm (D), load capacity 230 kg, steel, silver-colored, galvanized. 2 pieces/carton. * For universal use. * Base for customized shelving in combination with angle profiles. * Other technical features: Design: for bolt-together shelving. Kdjdsz Tn Uljpfx Ag Aeu

Condition: used, Tipping container, capacity 600 liters, L1458 x W855 x H1099 mm, brilliant blue, without drain valve. Kedpfez Tvf Sox Ag Ajdu * Tipping container with bearing, made of 2 mm steel sheet. * Top edge folded over twice. * Edge at the bottom folded over twice, welded to be oil-tight. * Base frame made of 3 mm angle profiles, with integrated

Condition: used, - with a specially alloyed carbide-tipped tooth and a special tooth geometry - for fine cutting and longitudinal cuts in construction lumber, plastics, composite materials, and aluminum Kdjdoz Ufl Rspfx Ag Aju - NAIL-PROOF

Condition: used, Equipment - Robust, professional-grade device - Fall protection net Kdsdpoz Ud Rfofx Ag Aju - PVC conveyor belt - Belt length: 6 m - Belt width: 60 cm - Chassis with pneumatic tires, Ø360 mm - Adjustable height via hand winch - Minimum conveying height with 6 m belt length: 2.50 m - Maximum conveying height with 6 m belt length: 3.80 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible translations at NO extra cost: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min

Condition: used, - Top quality, manufactured in West Germany Kodpfoz U Azisx Ag Ajdu - Ground and honed to a smooth finish - KV-A tooth geometry - For woodworking; suitable for coarse cutting

Condition: used, Swivel castor, D.160mm, load capacity 600kg, with plate, cast polyurethane * Steel sheet housing, zinc-plated and chromated * Double-row ball bearing in the fork head * Tread made of cast polyurethane, hardness 95 +/- 3 Shore, wheel body made of aluminum, high load-bearing capacity, minimal rolling resistance, quiet operation, high abrasion and tear resistance, resistant to greases, oils, etc., operating temperature -20 °C / +80 °C * Ball bearing * With plate mounting * Castors for heavy-duty transport * Additional technical features: Surface of housing: zinc-plated and chromated Kjdez U I Izjpfx Ag Aedu * Screw hole diameter: 11mm * Screw hole spacing: 105 x 75mm * Additional information: Standard * Plate width: 110mm * Material of housing: Steel sheet * Plate length: 138mm

Condition: used, Scissor roller conveyors, 600 mm, number of axles: 50 * Design: with ball-bearing, bright zinc-plated steel rollers * Optionally with 2-row ball-bearing, blue plastic rollers * Roller diameter: 48 mm * Axle diameter: 8 mm * All steel parts are zinc-plated Kjdpjz U Eqtefx Ag Aodu * Each support leg has 2 lockable swivel casters with solid rubber tires * Conveyor width: 300 mm, 400 mm, 500 mm, or 600 mm; the conveyed material can also be wider and protrude laterally * Roller spacing: stepless adjustment from approximately 32 mm to approximately 130 mm, depending on the extended length * Height adjustment range: standard from approximately 700 mm to 1100 mm * Delivery of intermediate lengths, special widths, and special heights is possible.

Condition: used, Thread cutting lubricant, 600 ml spray can, RIDGID · Cools threads and pipes during application · Accelerates metal removal Kedoz Up Ezspfx Ag Aedu · Improves thread quality · Reduces torque during thread cutting · Free from chlorine and other halogens, PCBs, and heavy metals