Used Motan Device Dossier for sale (11,293)

Condition: used, Technical details: tank capacity: - l total power requirement: 2,2 kw volume capacity: max: 1329 m³/h filter: Patronenfilter air-pressure connection: 6 bar weight of the machine approx.: 88 kg dimensions L x W x H: 1,15 x 0,60 x 2,35 m Cartridge filter/ smoke gas separator with spark pre-separator (H2O) for combustible dusts. Sheet metal construction. Pressure 2,250 Pa Temperature max. 65°C Compressed air tank size Ø 150x 480mm with 1x hose connection Ø 10mm and 1x screw connection inside with shut-off valve 1/2 inch Intake Ø 200mm, floor height = 940mm Nwodpfxou Nz Ugj Akusg Exhaust air on ceiling side, 500 x 500mm with tile filter Spark pre-separator medium water Dust collection container size L:360 x W:465 x H:280mm, floor mounting (removable) *

Condition: used, Technical details: Volt: 380 V Ampere: 150 A charging voltage: 24 V total power requirement: 3,6 kW weight of the machine approx.: 100 kg space requirements approx. LxWxH: 0,5x0,6x0,8 m Battery charger for electric forklift trucks, electric pallet trucks - 3 pieces available - All 3 devices are equipped with charging cables. Nwsdpfx Aksu Nu Sreujg Condition: not checked. On sale as is! *

Condition: used, Technical details: width: 190 mm depth: 200 mm Nsdou N Ecbepfx Akujwg height: 335 mm weight of the machine ca.: 29 kg

Year of construction: 1998, condition: used, Technical details: air flow rate: 1200 m³/h suction stud diamter: 360 x 350 mm Nsdpswfr Dlofx Akujwg drive power: 0,11 kW connected load: 380V V weight: - kg total power requirement: 0,59 kW dimensions L x W x H: 600 x 550 x 560 mm

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm Nwedpfxsu Icgue Akujg - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: width: 410 mm depth: 450 mm height: 985 mm weight of the machine ca.: 320 kg 1 piece Nwedpfou S Hubjx Akuog T-slot to DIN 650: T-slot width a=28; h= 42; b= 47; c= 19.5 mm, T-slot spacing 160 mm Foot clamping with slotted hole Ø 22 x 300 mm *

Condition: used, Technical details: width: 1250 mm Nodpsu S H Arefx Akuewg depth: 970 mm height: 1600 mm weight: 2,0 t 1 piece to DIN 650: T-slot width a= 36; h= 62; b= 62; c= 27 mm, T-slot spacing 200 mm *

Condition: used, Year of construction: 2012, volume capacity 60 l/mim engine output 2 kW Njdpfxjwa Umxs Akujwg turning speeds 2850 U/min feed pressure 9 bar Dimensions (LxWxH) 2400x1060x560 mm Total Dimension 2400x1250x1200 mm empty weight 280 kg

Condition: used, length 5000 mm width 1150 mm depth 2000 mm There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nwsdpfxeyqvxvo Akueg If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2011/67/47, saw blade diameter: 420 mm, input voltage: 400 V, saw blade bore: 40 mm, input current: 6 A, We are offering this very well-maintained GRAULE ZS 170 N mitre and cross-cut saw for aluminium and wood, year of manufacture 2011. Nwsdpfx Asy D Nkgskujg

Condition: good (used), Cartridge holder with shut-off valve Application: Butyl extruder Weight: 2.6 kg Nwedpfx Aoy Tk Tnokuog

Condition: used, Year of construction: 1997, open-circuit voltage 280 - 320 VDC current intensivity 30 - 80 A output voltage 140 VDC cutting medium Air / Nitrogen total power requirement ca. 11,2 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,90 x 0,35 x 0,50 m Plasma Cutting Machine HYPERTHERM - Hypertherm Powermax 1100 ERTHERM RT 80 hand torch - Recommended cutting capacity: 22 mm - Maximum cutting capacity: 29 mm Nwodpfxeym D Ane Akusg - Severing capacity: 38 mm - Gas: Air or nitrogen - Gas inlet pressure: 6.1 bar - Gas flow rate: 189 l/min

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Of particular note is the extensive range of accessories, as well as the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Technical specifications: Manufacturer: TESA (Switzerland) Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC/peripherals Measuring functions: Height measurement Internal and external measurement Diameter determination Distance measurement 2D/3D point measurement Geometry and position calculations Nedpey Tkg Ujfx Akuswg Equipment: Granite measuring plate Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders Accessories case / wooden box

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm Nodpfjtxkunsx Akuewg -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Condition: good (used), functionality: fully functional, Tooth-setting device for bandsaw blades Nodpfx Ajyki Hgskuswg

Year of construction: 2026, condition: used, NEW – Year of construction 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum fiberboard, cement fiberboard, and panel materials. Examples: doors, boards, MDF panels, fronts, gypsum fiberboard, facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your feeding and stacking processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical data: - Manufacturer: Ka-Ma - Type: KR-1300-1 - Working width: 1,300 mm - Including belt conveyor, length 3,000 mm - Working height: 930 +/– 50 mm - PLC control, operation via a touch panel, Siemens S7-1200 - Loading and unloading of parts using 2 suction plates, length 442 mm - Automatic signal after the loading process is completed - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height: approx. 1,000 mm (including pallet under the stack of panels) - Loading side on the left when viewed in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting weight: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min Nedjy S S Htspfx Akuswg - Electrical motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: - 2-circuit vacuum system with 4 additional suction cups, which lifts the panels by 15 mm on one side before the vertical movement. This is required for all through-suction materials.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S Nwjdpfx Akexqxw Tjujg - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Nodpfxexqxt Is Akuowg Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories # 7044 Nsdpfx Ajv I Tdgekuowg

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 24-month warranty Stainless steel model Advantages: + Excellent price-performance ratio + Simple and quick installation and operation + Housing made entirely of stainless steel + Can also be combined with an ice water system, if desired + Unit automatically opens the required water supply, providing hot/chilled water + Dispenses the correct mixture until the desired temperature is reached + Powerful electronic system based on a microprocessor + Water dosage from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + Digital display of water temperature and quantity + Temperature is adjusted with a thermostatic mixing valve (rotary knob) + Fast supply of spare parts within 1-2 working days STANDARD accessories, included in the price: Nwjdpfsivdxmjx Akujg - 1x Drain hose (2 meters long) with hanging hook Technical data: - Dosage volume: 0.1 - 99.9 liters or 1 - 999 liters - Temperature range: 0°C to +40°C (depending on water supply) - Power: 25 W - Water pressure: 2 - 4 bar (recommended) - Connection values: 230 V - 1 phase - 50/60 Hz - Dimensions: 305 x 120 x 390 mm (W x D x H) - Net weight: 6.8 kg

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Nedpfx Aksy Tptteuewg Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-N200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 250 mm Bowl diameter (bottom): 190 mm Bowl internal height: approx. 45 mm Sorting track width: approx. 3 mm Overall height (drive + bowl with sorting track): 240 mm Power connection: 230 volts, 50 Hz - Conveyor spiral made of metal Space requirement Ø x H: 260 x 240 mm Weight: 13.5 kg Good condition Matching control units with suitable connection plugs are available under stock numbers: 61867, 61866, 61856, 61858, 61889.

Year of construction: 2024, condition: like new (used), 4x lifting devices for floor rollers for in-plant transport, Bloksma – never used –: Price per unit ex-works: €1,950 (net) Manufacturer: Bloksma Accessory: lifting device Year of manufacture: 11/2024 Model: G4-HET-FVBEP-200 Part number: 210926A19554 Serial number: H-26277 Dimensions: L435 x W280 / GOK 935 Electric lifting device G4 Model HET-F Nodeyzczgspfx Akuswg Design: semi-mobile Loading direction: front loading Load capacity: 200 kg Lifting speed: 31 mm/sec Load handling equipment for BLOKSMA floor rollers BOF + BOZ For floor roller sizes: 600 x 400 mm + 630 x 430 mm Insertion direction: transverse Control: electric, 230 V / 50 Hz 250 kW, 16 A Motor with spindle drive Control element: detachable control panel Height detection: sensor-based height detection for single-piece closed containers GOK approx. 935 mm Color: Base frame RAL 9010, cover RAL 4006 Former new price: approx. €4,000 / unit (net)

Condition: excellent (used), We offer you: Njdpfx Aow Ra Hqjkuowg Embossing device for achieving form-fit connections Manufacturer: HWR Type: SOLIDStamp Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose Nwjdpfx Akewx Aadjueg including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Njdpsw Sav Iofx Akuewg Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments.