Used Multiple Group Workbench for sale (5,678)

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Bjdpszxuz Djfx Aqwjll

Condition: used, ESTEVE double interior silo unit 2 independent storage cells Capacity 2 x 1,500 kg, totaling 3,000 kg Dry bulk product, likely flour Dimensions: 5300 x 2580 x 2630 mm Electrical supply: 380 V Common support frame for both silos Two metal silo bodies Blsdpfxszx Thco Aqwjl 1 - Filling: connection and piping Ø 80 mm Cell feeding via filling circuit 2 - Storage: 2 cells of 1,500 kg Separation of 2 batches or compatible products Graduated level indicators on both cells Front inspection ports 3 - Discharging: hoppers at the bottom Product directed towards the extraction system 4 - Extraction: mechanical system with rollers Product extraction at the outlet of the cells 5 - Screening: integrated sifter Sifter motor 0.75 kW according to installation sheet 6 - Transfer: pneumatic system RBL 10 Transfer motor 3 kW according to installation sheet Piping circuit of approximately 25 m Distribution piping included 7 - Filtration: textile filter sleeves Motors installed at the bottom Integrated storage, extraction, screening, and transfer Brand: ESTEVE, now integrated into Shick Esteve The ESTEVE JE 2500 double interior silo unit is a professional, used equipment designed for storing dry bulk ingredients. It includes two independent 1,500 kg cells each, for a total capacity of 3,000 kg. The identified use is likely related to flour or compatible powdered dry products. The unit combines storage, mechanical extraction, screening, filtration, and pneumatic transfer in a single installation powered by 380 V. Why this model stands out The JE 2500 is not limited to storage; it brings together several functions necessary for handling a bulk ingredient. Its two cells allow for the separation of two batches or two compatible products, while extraction via rollers ensures the mechanical removal of the product. The integrated sifter and RBL 10 pneumatic transfer system complete the installation for organizing its flow. This configuration is particularly advantageous when a project requires a professional interior flour silo with several pieces of equipment already grouped on the same frame. Key advantages Two independent 1,500 kg cells Total storage capacity of 3,000 kg Mechanical extraction via rollers Pneumatic transfer system type RBL 10 Sifter integrated into the unit Filtration with textile sleeves Filling via Ø 80 mm connection Front inspection ports Graduated level indicators on both cells Unit installed on a common support frame

Condition: used, mileage: 120,210 km, power: 96 kW (130.52 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 3,050 kg, maximum load weight: 450 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 16 m³, loading space length: 3,810 mm, loading space width: 2,060 mm, loading space height: 2,150 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, Renault Master 130dci with refrigeration - Refrigerated box body - Carrier Xarios 500 refrigeration unit - Deep-freeze capability - Power connection - Portal doors - Tail lift - Side door - Manual transmission Blodpfxozx Tfne Aqwol - Air conditioning - Cruise control - ABS/ASR/ESP - 3 seats - EURO 6 - Payload: 450 kg - Tires: 225/65R16 - FRCX 11.2027 Very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders; therefore, you will generally find the export price in our listings, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be seen as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions contained in the purchase agreement are decisive. Subject to change, errors, typos, and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, Model: DRV250. Includes case, charger, and two 18 volt batteries. Good condition. Multiple units in stock. Price: € 350,- ex VAT Bjdpfxszxvhxe Aqwell

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, Base Machine - SH-5000P - Demonstration Machine Like New • Basic machine, 4-axis • Control: Siemens 840D sl Blodpfszluqlsx Aqwjl • Table size: 500x500mm • Max. table load: 500kg • X/Y/Z travels: 730/730/830mm • X/Y/Z rapid traverse: 60/60/60 m/min • Milling spindle: • HSK63 • 30/50kW • 18,000 rpm • Tool magazine with 40 stations • Automatic pallet changer • Automatic loading door • Hydraulic unit • Oil separator • Oil mist extraction • Air conditioning unit for electrical cabinet • External measuring systems, linear axes • Media feed under pallets • Central lubrication • Door interlock • Coolant unit • Internal cooling with 70 bar high pressure • Coolant and compressed air gun • Chip conveyor • Documentation in German, digital

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 4033, overall weight: 800 kg, type of input current: AC, input voltage: 220 V, total width: 1,000 mm, total length: 10,000 mm, total height: 1,200 mm, Pitney Bowes Vantage Sorting System designed for high-volume mail processing, document handling and sorting operations. The system is engineered to scan, image and sort large volumes of mail using automated OCR, configurable sorting bins and piece-level tracking. This is a comprehensive industrial sorting system comprising eight sorting sections, multiple sorting bins, operator control panels and monitoring equipment. Information displayed on-site indicates a processing capacity of approximately 45,000 mail pieces per hour and approximately 30 million pieces annually. Bjdszxbgajpfx Aqwell Depending on the configuration, the available specifications indicate maximum processing speeds of up to 46,300 No. 10 envelopes per hour or up to 50,000 postcards per hour. Manufacturer: Pitney Bowes / BlueCrest Model: STV1 Year: 2012 Product line: Vantage Sorting System Equipment type: Automated letter and mail sorting system Construction: Metal structure New one around 1,5 m. Euros Requests for proposals.

Year of construction: 2017, condition: excellent (used), Karl Schnell Processed Cheese Blending Line Capacity: 5,000 kg per hour. Complete Karl Schnell preparation/blending line, ideally suited for the preparation and blending of ingredients prior to the processed cheese melting process. Designed for efficient processing of cheese blocks, butter, powders, and other dry ingredients. The Karl Schnell grinder offers capacities of up to 5,000 kg/h, depending on the product. The line can feed a processed cheese UHT system and/or multiple cookers, making it highly suitable for continuous industrial production. Two heavy-duty ribbon blenders provide efficient and homogeneous mixing of all ingredients. Large buffer tanks ensure controlled product flow. Equipped with heavy-duty Waukesha pumps, load cells, recipe-controlled operation, CIP capability, and an integrated pigging system. Designed for large-scale industrial use, offering high capacity, flexibility, and reliable ingredient preparation. Bedezxcgbjpfx Aqwell Machinery: - Processed Cheese Blending Line 1. Trolley Elevator 2. Grinder 3. Conveyor 4. Blender 1 – 1,500 kg with buffer 5. Blender 2 – 1,000 kg with buffer 6. Pigging system

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: Bedpfx Aqszxc Ncswjll - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Natural chipboard New goods BLT / WR 20/60 100% quality at the best price. Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown. Bledpfxjzxpbxj Aqwsl Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Are you interested or have any questions? Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, number of seats: 29, gearing type: mechanical, axle configuration: 4x4, emission class: euro3, color: white, suspension: steel, tire size: 365/80 R 20, wheelbase: 4,160 mm, Year of construction: 2025, Equipment: air conditioning, all wheel drive, power assisted steering, traction control, - Autoradio - CD - Heater LOOKING FOR A 4x4 PASSENGER BUS FOR DEMANDING OPERATIONS? When passenger transport needs to continue beyond paved roads, a conventional bus may not be enough. The Mercedes-Benz Atego 1725A 4x4 Passenger Bus combines a robust Mercedes-Benz commercial vehicle chassis with 29+1 passenger seats, 245 HP EURO 3 power, front and rear differential locks and off-road tyres. With independent passenger air conditioning, an insulated purpose-built bus body, rear-view camera and integrated roof rack, this Atego is designed for reliable passenger transport across remote sites, infrastructure projects and demanding regional routes. AT A GLANCE - Mercedes-Benz Atego 1725A 4x4 - 29 + 1 Passenger Seats - 245 HP / 180 kW - EURO 3 Diesel Engine - Front & Rear Differential Locks - Mercedes-Benz G 85-6 Manual Transmission - Mercedes-Benz VG550 Transfer Case - 365/80 R20 Off-Road Tyres - Independent Passenger Air Conditioning - Steel Body with Anti-Corrosion Treatment Bodpoy Rtyljfx Aqwsll - Insulated Passenger Compartment - Aluminium Exterior Panelling - Rear-View Camera - Integrated Roof Rack Why This Configuration? Passenger transport becomes more challenging when the destination is located away from conventional road networks. The Mercedes-Benz Atego 1725A combines 4x4 capability with a dedicated 29+1-seat passenger body, creating a specialised solution for organisations that need to transport groups reliably across demanding operating environments. The Mercedes-Benz six-cylinder engine produces 245 HP / 180 kW, while the manual G 85-6 transmission and VG550 transfer case form the basis of the 4x4 drivetrain. Front and rear differential locks provide additional traction when conditions become difficult. Built for Demanding Routes Mining operations, infrastructure developments, construction sites and remote projects often require regular passenger transportation over gravel roads, unpaved routes and difficult access roads. That is where this Atego differs from a conventional passenger bus. Its 4x4 drivetrain, front and rear differential locks and 365/80 R20 off-road tyres provide the mobility required when paved-road transport is no longer enough. The result is a passenger vehicle designed to keep teams moving between locations where conventional buses may struggle. 29+1 Passenger Capacity The purpose-built body provides seating for 29 passengers plus one additional seat, using fixed-back seats throughout the passenger compartment. This provides practical capacity for transporting complete teams in a single vehicle while retaining the mobility of a two-axle 4x4 platform. An independent air-conditioning system with its own power pack supports passenger comfort, particularly during operation in warm climates. Purpose-Built Passenger Body The passenger body uses a steel structure with anti-corrosion treatment, aluminium exterior panelling and closed-cell polystyrene insulation. Marine plywood flooring provides a robust structural base, while a dedicated passenger entrance supports regular boarding and disembarking. Additional equipment includes a rear-view camera for easier manoeuvring and an integrated roof rack for luggage or additional equipment. Why Buy from Schaften Automotive? Since 1977,...

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: SG47E1P001, working width: 3,200 mm, TECHNICAL DETAILS Printing/substrate width: max. 3.20 m Printing technology: HP Latex, water-based latex ink Printing inks: 6 colors (C, M, Y, K, Lc, Lm) Bledpfx Ajzyappsqwel MACHINE DETAILS Connected power: 11 kW Frequency: 50 / 60 Hz Voltage, 3-phase: 200–240 V / 380–415 V Current consumption, 3-phase: max. 48 A / 30 A Voltage, 1-phase: 240 V Current consumption, 1-phase: max. 63 A Energy consumption during operation: 11 kWh Energy consumption in standby mode: 0.2 Wh Operating altitude: max. 2,000 m EQUIPMENT Integrated curing/drying system Certifications: CE, CSA, EAC, KCC, FCC Part 15 Class A, VCCI-A

Year of construction: 2020, operating hours: 3,182 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10465394, MEIKO M-iClean HXL-PW – Double-basket hood dishwasher including stainless steel infeed and outfeed table with basket guide. Premium class, taken from ongoing operation at an event location. Outstanding key data according to the machine display: only 3,182 operating hours and 23,991 cycles – exceptionally low for the year of manufacture (screenshot in the images). Commissioned on 27.02.2020, serial number 10465394, software version 6.4.6. Equipment: Double-basket system 2 × 500 × 500 mm, up to 120 baskets/hour; PowerWash with multiple pump power levels; hood automation with automatic basket recognition; detergent and rinse aid dosing; drain pump; free passage height 505 mm; includes infeed table with roller conveyor and outfeed table; 400 V connection. Ideal for event locations, catering services, canteens, hotels, or large kitchens. Inspection and test run on-site are possible and desired. Commercial sale with proper invoice (VAT shown). Collection/dismantling by arrangement. Price: €10,900 fixed price, plus VAT. Bodpoznd U Sefx Aqwjll

Condition: good (used), Year of construction: 1998, Specifications: Maximum size 320 x 440 mm Minimum size 100 x 150 mm Max speed MX gathering machine 100 cycles/min Max stack height - Plus stacker 150 mm Consisting of: Gathering machine: Raccoglitrice MX - Hand feeding station - Number of gathering stations: 21 - Optical sheet control - Pump(s) - Distribution unit: MX Modulo - Colour monitor with touch screen - Distribution section into 3 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 1998 Bjdpozbu Uksfx Aqwjll - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump Sewing machine (2) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump Sewing machine (3) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump

Condition: used, functionality: limited functionality, working width: 220 mm, working height: 120 mm, overall weight: 2,300 kg, power of feed motor: 1,200 W, spindle speed (max.): 6,000 rpm, table length: 2,000 mm, feed roller diameter: 120 mm, Equipment: motor brake, COMPACT 22 - AUTOMATIC PROFILING MULTIPLANER Max working width 220 mm Min working width 25 mm Max working height 120 mm Min working height 6 mm Min workpiece length 480 mm Feed rate 6 - 12 m/min spindle speed 6000 r/min spindle diameter 40 mm length of vertical spindle 135 mm length of horizontal spindle 230 mm axial adjustment of vertical spindle from 0 to 25 axial adjustment of horizontal spindle from 0 to 25 Min/Max tool diameter for vertical profile tools 100 – 180 mm Min/Max tool diameter for horizontal profile tools 100 – 180 mm Min/Max tool diameter on dressing shaft 120 – 140 mm Bsdpfx Aqstph Nmewoll Min/Max joint bevel cutter diameter 145 – 165 mm motor power of dressing shaft 4 kW motor power of vertical spindle 5,5 kW motor power of thickness shaft 4 kW motor power of feed 1- 1,2 kW motor power of height adjustment 0,37 kW feed roller diameter 120 mm feed table length 2000 mm adjustment range of feeding table and joint ruler 10 mm diameter of suction hood 120 mm net weight 2300 kg dimensions with universal spindle 3980 x 1520 x 1850 mm

Condition: used, Wigo Double squaring machine with 3 groups per side, complete with inverters. - right and left circular saw - right and left cutter - right and left cutter Max working width: mm. 1500 Engine power: Circular saws: 3KW X2 Toupie Milling Machines: 5.5kw x2 Blsdpjummldefx Aqwsl Rotary Sanders: 5.5kW x2 Feed motor: 4KW Shoulder width adjustment motor: 3KW

Condition: used, empty load weight: 9,274 kg, maximum load weight: 29,726 kg, overall weight: 39,000 kg, first registration: 04/2025, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, electronic stability program (ESP), NEW!!! Schmitz deep-freeze trailer with Thermo King refrigeration - Refrigeration unit: Thermo King Spectrum A500 - 13.40 x 2.50 x 2.65 m - Bi-temperature - Double deck - Flower width - Power connection - Disc brakes - Temperature recorder - Schmitz axles - Lift axle - 4x pallet box - aluminum floor - FRC 2030 - tires: 385/65/22,5 NEW! Net export price! NEW!!! Schmitz deep-freeze trailers with Thermo King refrigeration - Refrigeration unit: Thermo King Spectrum A500 - 13.40 x 2.50 x 2.65 m - Bi-temperature - Double deck - Blummen width - Power connection - Disc brakes - Temperature recorder - Schmitz axles - Lift axle - 4x pallet box - Aluminum floor - FRC 2030 - Tyres: 385/65/22.5 NEW! Net export price! NOUVEAU !!! Schmitz semi-remorque frigorifique avec réfrigération Thermo King - Groupe frigorifique : Thermo King Spectrum A500 - 13,40 x 2,50 x 2,65 m Blsdpfx Aqevihz Newol - Bi-Température - double étage - Largeur de la fleur - Raccordement électrique - Freins à disques - Enregistreur de température - Essieux Schmitz - Relevant food - 4x caisses-palettes - Plancher en aluminum - FRC 2030 - Pneus : 385/65/22,5 NOUVEAU ! Prix net export ! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our advertisements, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and is no substitute for detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typing errors and prior sale. Our general terms and conditions apply exclusively. Languages - We speak english - On parle francais - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Year of construction: 2024, condition: new, - 50 mm cutting height - 1210 mm cutting width - 12 driven rollers - 10 - 30 m/min variable feed rate - 37 KW Sawing Motor (more is possible) - 2,2 KW Feed Gearbox Bodpfjfdzrhox Aqwsll - 70 mm Sawing spindle - 225 mm Circular Saws - 4000 Kg weight of the machine

Condition: new, mileage: 22 km, fuel type: gasoline, axle configuration: 4x2, wheelbase: 3,250 mm, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,700 mm, loading space width: 1,800 mm, loading space height: 1,600 mm, Equipment: all wheel drive, cooling unit, PIAGGIO NP6 LPG, DOUBLE WHEEL INSULATED VAN WITH THERMO V 200 MAX REFRIGERATION UNIT (-20) FOR ROAD/GRID POWER NEW, AVAILABLE FOR IMMEDIATE DELIVERY READY FOR REGISTRATION EXTERNAL DIMENSIONS: 2700X1800X1600 INTERNAL DIMENSIONS: 2540X1640X H 1440 START VERSION AT OTHER LOCATIONS OF OUR GROUP, WE ARE OFFICIAL MERCEDES-BENZ DEALERS TRUCK, NAPLES BRANCH (NA) DOMENICO ESPOSITO, EBOLI BRANCH (SA) OFFICIAL FORD TRUCK DEALER, DOMENICO TRUCK SRL BRANCHES: MARCIANISE (CE), NAPLES (NA), EBOLI (SA) AND OFFICIAL PIAGGIO COMMERCIAL DEALER DOMENICO ESPOSITO WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM MULTIPLE BRANDS (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA-MAN-NISSAN-ISUZU-FI XED PLATFORM-CRANE-DUMP TRUCK-CURTAIN-SIDER-BOX-TAIL LIFT-REFRIGERATED CELL-INSULATED WITH REFRIGERATION UNIT-VAN) - POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING ON SITE. TEL. 0- BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM SATURDAY 8:30 AM / 2:00 PM Bledpehrhvrefx Aqwel

Condition: new, Year of construction: 2024, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Bsdpfshwrlxox Aqwjll Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Workbench with sheet steel shelf and 10-year manufacturer's guarantee* Made in Germany - Beech multiplex board 750 x 700 x 40 mm, without back board - Base frame made of VK tube 40/40/2 mm - Sheet steel shelf 600 mm deep - Leg elements with plastic adjustment plugs Blsdpfx Asubxxqjqwol - Surface load with evenly distributed load: 1000 kg - Standard workbench - 750 x 700 x 840 mm L x D x H - Ergo version - 750 x 700 x 900 mm L x D x H Available in 7 different basket colors: - Anthracite gray - Gentian blue - Fire red - Sky blue - Light blue - Light gray - Pure orange - Reseda green - Signal blue - Deep black * 10-year manufacturer's warranty. Wearing part excluded. This item is delivered free kerbside. Delivery time usually 5 working days. Free shipping within DE without islands.

Condition: good (used), Year of construction: 2005, functionality: limited functionality, machine/vehicle number: M9405, color: green, - internal diameter of cyclone 750mm - sieve size 3000x1600 mm 1 level - indicative sand production 65 cubic meters / h - turbid production 10000 liters / min - Pump motor power 75Kw Bodpfx Aqou Avvxjwjll - Max. sieve motor power 6+6 Kw - use and maintenance manual

Condition: good (used), Bosch Turbo Scara SR6 Swivel-Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideal for assembly work and fast pick-and-place movements. The turboscara SR6 and SR8 are swivel-arm robots (SCARA robots) with four axes and offer the following advantages: • Minimal cycle time with maximum precision • Large workspace and various strokes • Defined mechanical interfaces • PC control with diverse communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; New with BAPSplus: graphical user interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Technical specifications: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/maximum 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Including controller Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since this item is available multiple times and the robots have different Work tools these are only sample images and may vary. Item condition: Used Bljdpfx Aeiuzqtjqwol (Subject to changes and errors in the technical data, information is subject to change!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. A wealth of workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are available. A total of 24,000 m² of production space will be dismantled and sold. Please also note our other offers. The amount is due within 7 business days of purchase. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Aluminum plate aluminum 252 x 128 x 6cm workbench worktop Heavy aluminum plate -37- Aluminum 252 x 128 x 6cm Workbench worktop. More items - new and used - you will find in our store! International shipping costs on request! Bedpfxsiu Uzue Aqwjll

Condition: like new (used), Stainless, 60l capacity mixer, rotating bowl with tilt discharge, mixing paddle forward and reverse, mobile, 1Ph Bodpfx Aqeivufwowjll

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) Bledpfx Aqsivur Aowsl 70-meter painting line with friction system for loading multiple products in a small space (see video)