Used Oak Hub B.v. Exhaust Pipe for sale (12,632)

Condition: used, mileage: 242,466 km, power: 120 kW (163.15 HP), first registration: 05/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals at the front on the side, roof control unit with reading light on driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps at the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall lining, thermal insulation of the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle / rear axle * 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure from WAS * Adjustable floating table * Stretcher frame * Light carrying chair * Central locking for patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Skylight * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear Knjdpez A Ncbofx Akweb * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning at the front and rear * Automatic transmission * Telma retarder * Electric windows * electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Dual-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2024, at the front with approximately 6.0 mm and at the rear with approximately 4.0 mm tread depth Engine, automatic transmission, and rear axle are dry The engine runs smoothly, and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved

Condition: used, Year of construction: 2017, Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame Kedjx R An Eopfx Akwjnb 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Year of construction: 2003, condition: good (used), functionality: fully functional, Highly Automated CNC Pipe Bending Cell: Rosenberger RB20 Typical Applications The RB20 series is designed for the cold bending of pipes with one or more bends. It is used in industries such as the automotive industry, furniture manufacturing, and plant engineering, where precise, repetitive bends are required. Knjdpfx Akszz Hn Ieweb Technical Features and Function Type: ROSENBERGER RB20 (manufactured in 2003) Performance & Geometry: Servo-electric precision drive with a cold bending capacity of up to Ø 20 x 1.5 mm in steel. High flexibility thanks to freely selectable bending planes within the 78 mm die height and generous 3-axis travel ranges (X/Y/Z: 260 × 146 × 1,170 mm) Control Technology: The logic is managed by a robust Siemens Simatic S7-300 PLC, paired with an industrial operator panel from B&R Robotic Automation: Fully automatic handling (loading/unloading) via an integrated Motoman industrial robot, complete with XRC controller and the corresponding teach-in terminal for path programming. Product removal is carried out reliably via a discharge conveyor belt. Marking system (upgraded in 2021): A modern, high-performance VideoJet 1860 inkjet coder (manufactured in 2021) with microprocessor control enables direct product marking (e.g., lot numbers or barcodes) immediately after the bending process System Safety & Peripherals: CE-compliant safety measures via a SICK safety light curtain and a perimeter safety fence. Optical status indication via R

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBMA-GI, 1x ABUS wire rope hoist Crane hoist 6300KG 6.3to GM2063H6-201.41.063 E160 4 pieces available Payload 6300KG / 6.3t payload / lifting load - 4 strands with 2 lifting speeds, lifting height approx. 6m, track width of the lifting gear approx. 30cm (+- a few cm adjustable) with control bottle and connection plug for the power supply Knjdpfx Aksvbck Aewjb Weight complete approx. 400 kg, connection to 400V 50Hz Very good condition, see pictures Item location is 75053 Gondelsheim See pictures

Year of construction: 2026, condition: new, functionality: fully functional, Mobile battery charging station – Safe charging without fire hazards Visit acculaadstation.com for more information. Knjdpjzq U H Defx Akwob Are you looking for a safe and flexible way to charge your traction batteries (forklift, reach truck, pallet truck)? This mobile battery charging station offers the solution. Why this charging station? Freely movable – the station can be easily moved away from the wall and stands completely independently in the space during charging. Extra fire safety – in the unlikely event of a fire, the station can be easily and quickly moved away. Cables remain intact – the charging cables never touch the ground, preventing damage to plugs and cables and extending their lifespan. Flexible layout – place 1 conventional charger or 2 high-frequency chargers in the station. Durable finish – the steel charging station has a powder coating for a strong, scratch-resistant appearance. Available in 3 versions, external dimensions (L x W x H): • Standard: 790x590x1150mm • XL: 990x790x1500mm • XL with Platform: 990x790x1500mm (Platform height: 500mm, measured from the ground) Prices available upon request. Free delivery within the Netherlands. What do you get? Each charging station is delivered fully assembled, including 1 balancer and 1 tension strap. Excluding the installation of the battery chargers. Battery is not included. Ideal for: Warehouses, distribution centers, and companies that use forklifts or other electric equipment and are looking for a safe, organized, and fire-resistant charging solution. To place an order, request price information, or for more information, please contact us via our email address.

Condition: used, mileage: 163,990 km, power: 235 kW (319.51 HP), first registration: 09/2014, fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal reference: 1141 * Vehicle from first municipal ownership * MAN TGS 28.320 * 3-seater * Automatic * EURO 6 * Tyre condition: 7/7, 9/9/9/9, 7/7 * Maintenance performed at 144,375 km; now, as of Dec 2025 – 153,081 km – renewal: diesel filter, air filter, air dryer cartridge, front axle wheel bearings replaced, front axle brake pads and discs replaced, transmission actuator (3,516 EUR/net), ABS sensor, etc. Invoice available for EUR 7,786.85 incl. VAT. * Chassis equipment: VOK-09 dropped frame, parabolic spring 8.0 t (2-leaf), electronic stability program (ESP), rear axle differential lock, liftable trailing axle, M-FHS (F99L/R17), dashboard center section with one drawer, FHS rear wall with 2 tinted windows, heated/electrically adjustable rear and wide-angle mirrors, heated driver comfort seat, radio with navigation system, passenger comfort seat, external sun visor, heated/electrically adjustable kerb mirror on the right, EU front mirror, toll recording OBU DIN slot, roof antenna GPS/phone, digital tachograph, daytime running lights, combined main beam/fog lights with cornering light, side marker lights, 315/80 R22.5, underrun protection/entrance step front, raised exhaust pipe on right, 3-piece rear mudguards, chassis with FHS, MAN TipMatic, ZF Intarder, rotating beacons, work lights. * Central lubrication system for the body * Body manufacturer: FAUN UMWELTTECHNIK * Model/Designation: ROTOPRESS 519L * Serial No. 11519-14-523025, Year of manufacture: 11.09.2014 * Lifter manufacturer: ZOELLER KIRCHHOFF GROUP * Model/Designation: LIFTER 02301 DELTA * Serial No. 1406365-002, Year of manufacture: 01.07.2014 Knedpfxsrn Nf So Akwjb * ... * All details without guarantee * Subject to prior sale * Please refer to our general terms and conditions

Condition: new, Year of construction: 2023, Storage location number: 100503396 Knsdpfx Akjzkzt Rewob Transport dimensions (L x W x H): 0 x 0 x 0 ---- CLK 120 Set Consisting of: 1x CLK 120 heater, year of manufacture 2023 1x Thermostat 1x Rain cover 1x Exhaust pipe 1m 1x Hose 505x7600 mm Rated heat output: 114.0 kW Rated heat input: 105 kW Pressure max. 220 Pa Fuel: Heating oil EL/diesel, biodiesel/B7/B10, biofuel HVO Rated current consumption max: 8.2 A Rated power consumption max: 1.8 kW Air outlet diameter: 500 mm Exhaust outlet diameter: 200 mm Dimensions H/W/D: 1350/920/2100 mm Weight: 316 kg Connection pressure: 12 bar

Year of construction: 2002, condition: used, Serial number: 650755-0202 Capacity 6000-6500 p/h Knodpez Ava Aofx Akwob Previously produced 1000 ml Tetra Pak milk cartons Packages capacity 150-1000 ml Weight approximately 9300 kg Hours 26 684 h Equipped with tetra pak screw cap applicator KSM manufacturing, 4005.1.1.31, 2001 Belt length 5 994 mm LxWxH 6000x2700x3600 Note! Outgoing pipework not included Online auction due to the full stop closure of Swedish dairy plant Emåmejeriet, manufacturer of butter cream and milk products (e.g. ALFA-LAVAL separators, RANNIE, TETRA PAK homogenizers, TETRA REX filling lines, MULTIVAC R5200 vacuum packing ELOPAK, many s/s storage tanks WEDHOLMS, logistics, carts, racks, many spare parts etc.) at Hultsfred in Sweden. The online auction opens Monday 14 September and closes Thursday 22 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 20 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 1994, 1994 | Renault M180 | Used Tipper Truck | 782086 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Knjdex Sz Aqspfx Akwob 👷‍♂️ Inspected by an independent expert 38 inspection points 29 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Black and white exhaust smoke, various points of rust on the chassis, diesel smell, poor, burned, significant leaks at the tipper cylinder, leaks at the hydraulic filter as well as the piping, side door of the tipper does not lock. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39717 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2003, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Ksdpjywd I Tefx Akwjnb Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall cabinet.Designed for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Kedpfxov Ed Ukj Akwenb Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: used, mileage: 28,817 km, power: 210 kW (285.52 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total width: 25,500 mm, total height: 37,200 mm, Year of construction: 2007, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Kedpjzz U Nmsfx Akwsnb Mercedes-Benz Axor 1829 A 4x4 Flatbed with Tarpaulin A70 Front axle differential lock, AL3 front axle 7.5 t, AM3 rear axle H7 13.0 t crown wheel 300, AR1 axle ratio i = 5.333 (HL7), B02 anti-lock braking system (ABS), B43 dual-line trailer brake, BB6 drum brakes on front and rear axles, BB9 brake circuit rupture protection, C42 rear axle stabilizer, underframe, C63 steel bumper version, CL9 LS 6/LS 8 steering, CR5 reinforced frame head for special bodywork, CU0 foldable rear underride guard (Meiller), D15 tiltable sunroof, D17 turntable, E10 blackout circuit, E84 lockable battery box, ES8 auxiliary socket 24 V/15 A, cab rail, F20 S cab, extended by 180 mm, FE5 electric window regulators, driver and passenger doors, FL3 reinforced cab suspension, rear, FL6 standard cab suspension, FN1 split dashboard, FQ7 storage over windshield, 2 compartments, FS9 electrically adjustable exterior mirror, driver’s side, FX7 aerodynamic front mirror, GS3 hydraulic gearshift, GT1 gearbox G 131-9/14.57-1.0, GV3 transfer case VG1400 – 3W, H03 air conditioning, H04 additional thermal insulation, HF2 pollen filter, HH1 Eberspächer D5W S hot water auxiliary heater, I40 tires 14.00 R 20 front/optional, I41 tires 14.00 R 20 rear, IA1 axle configuration 4x4, ID1 leaf suspension, IQ8 wheelbase 4200 mm, IV0 18-tonner, IX5 6-cylinder inline engine, IY2 hydraulic fluid Pentosin CHF 11 S, JD3 digital tachograph EC, rev counter and auxiliary recorder, ADR, JK3 multi-function instrument cluster, graphic display, eco-meter, KAL3 front axle 7.5 t, KCYF flag holder, KESM jump-start/power socket 2-pin (STANAG), KFML 2 rifle holders for "G36" model, KFMP cab equipment package for BWFPS, KFMY 1 additional rifle holder, KG1 muffler, small SCR cat, stainless steel, KH8 silencer with downward-curved exhaust pipe, KH9 exhaust moved to rear, KHH1 Eberspächer D5W S hot water auxiliary heater, KP2 AdBlue tank 35 l, KP9 AdBlue container plastic, KS2 main tank 300 l steel, KSMA foldable middle seat with seat belt, KTM0 weight variant 16.5 t (7.5/9.0), L30 stone guard grille, headlights, L72 electricals for third-party bodies, M49 tandem air filter, M89 flame device, MD4 speed limiter 90 km/h, EU, MD9 cruise control, MQ8 engine, R6, LA, 210 kW (286 hp), 2200 rpm, MS4 BlueTec 4 (Euro IV), N05 PTO gear drive MB, 2c, N80 transmission lock for PTO, NZ1 simple PTO, Q29 trailer/towing coupling, Ringfeder, QC8 front spring 7.5 t, asymmetrical, QE9 rear spring 13.0 t, rigid, R82 wedge rim 10.00-20, single tires, R87 spare wheel/spare rim, S28 middle seat with seat belt, SA0 artificial leather seat covers, SG2 Isringhausen standard passenger suspension seat, SG5 Isringhausen standard driver suspension seat, TM0 weight variant 16.5 t (7.5/9.0), Cargo area dimensions: L 5,090mm W 2,470mm H 1,990mm, NATO, coupling heads, tire tread: 1st axle 14 mm; 2nd axle 13-14 mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale!!! - ESP, auxiliary heater Cab: Short-haul/Distribution Engine displacement: 6,347 cc Gross vehicle weight: 16,500 kg Contact Tobias Ebert, ...

Condition: used, Year of construction: 2025, operating hours: 6 h, power: 82 kW (111.49 HP), Operating hours: 6, First registration: 06/30/2026. New tractor with dealer’s temporary registration before handover. Standard equipment / technical data. Engine: Rated power (ISO) 82 / 110 kW / hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4 l, 4 valves, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - one-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-shifting reversing gear, 4-stage load shifting, Continuously cooled wet clutches with independent lubrication system, Double PTO shaft: 540 / 540E / 1000, Switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / lifting system: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single / double acting, mechanical remote control + 1x single / double acting, neutral, SST, Quick coupler Cat. 3 with balls and catch cups Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lifting struts on both sides and 2 side stabilizers, EHR with external control on both fenders. Electrical equipment: Thermostart, 120 A alternator, Battery disconnect switch, electrical, Power supply (12 Volt) for external devices with connector. Axles / additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Quick-adjusting automatic trailer hitch, Fender outer width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Cab: Vibration-damped standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver’s seat with armrests, rotating adapter, seat belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplers, 3 control valves: 1x MR, double acting, EA, SST + 1x double acting, neutral, SST + 1x double acting, neutral, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Passenger / instructor seat with belt, Air-suspended driver’s seat, automatic adjustment with seat belt, rotating adapter and armrests, Rear window wiper / washer system, Battery. Kjdpfx Asyvmq Iskwjnb

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Effective cutting size for square pipes: □10 mm – □225 mm X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Knedektffzspfx Akwjb Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Price is EXW, including loading on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, mileage: 163,372 km, power: 84 kW (114.21 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M635----VW CRAFTER 2.0 TDI 9-SEATER----MILEAGE: 163,372 KM, SERVICE BOOK MAINTAINED LAST OIL CHANGE IN 2024----* AIR CONDITIONING ----180° REAR DOORS----9 SEATS----REAR-WHEEL DRIVE----ELECTRIC WHEELCHAIR LIFT AT THE REAR WITH A MAXIMUM LOAD CAPACITY OF 350KG----ELECTRIC RETRACTABLE STEP AT THE SLIDING DOOR, RIGHT SIDE----WHEELCHAIR SECUREMENT SYSTEM----AUXILIARY HEATING----* ELECTRIC EXTERIOR MIRRORS * ELECTRIC WINDOW LIFTERS * USB * AUX * SD CARD * LEATHER STEERING WHEEL Knjdpfx Ajzrkpdskwjb * BLUETOOTH HANDS-FREE SYSTEM * 12V SOCKET * ROOF WITH STORAGE/COMPARTMENT ----Special equipment: * Audio system RSD 2000 (front speakers) * Mobile phone interface Bluetooth, exterior mirrors electrically adjustable and heated * Isofix mounts for child seat in rear seat * Rear headrests height/tilt adjustable * Spare wheel in road condition * On-board tools and jack * Tire repair kit * Seats in the driver's cabin: double co-driver seat * Seats in the cargo/passenger compartment: 1st row, narrow 3-seater bench * Seats in the cargo/passenger compartment: 2nd row, narrow 3-seater bench Additional equipment: * Storage compartments: luggage net on rear tailgate * Storage compartments: shallow tray/compartment above windshield * Airbag driver's side * Anti-slip regulation (ASR) * Exhaust pipe straight to the rear * Floor covering in the cargo/passenger compartment: rubber * Roof lining * Suspension: comfort suspension at the rear * Window in cargo/passenger compartment: fixed at the rear left * Window in cargo/passenger compartment: fixed at the rear right * Window in cargo/passenger compartment: fixed at the front left * Window in cargo/passenger compartment: fixed at the front right * Additional noise insulation (driver's cabin) * Rear tailgate with glazing * Rear window heated * Body/structure: station wagon, high-roof standard * Body variant: high roof * Front headrests height/tilt adjustable * Marker lights, side * Model refinement * Engine 2.0 Ltr. 84 kW TDI * Wheelbase 3665 mm * Low emission according to exhaust standard Euro 6 * Sliding door cargo/passenger compartment, right * Seat cover / upholstery: fabric * Seats in the driver's cabin: co-driver seat adjustable * Seats in the driver's cabin: driver's seat height adjustable * Seats in the cargo/passenger compartment: mounting points for 3-seater bench * Stabilizer bar at the front * Steel rims 6.5x16, lining in the cargo/passenger compartment: wood / foil, half height * Warm air outlet under 1st row of seats * Warning system for seat belt (driver's side) * Heat protection glazing * Permissible total weight 3.50 t * Additional brake light * Additional heater (air) ----If desired, we will equip the vehicle with a trailer coupling. Professional installation – quick and reliable, starting from €599. ++ Exclusive offer at Autohaus Mat GmbH: Up to €1,000 trade-in bonus – your advantage when switching vehicles (valid only for commercial vehicles)++ Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We take over the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when buying a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer tailored financing plans, adapted to your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will accompany you from the first consultation to the vehicle h

Condition: used, Offered: Universal Exhaust Silencer. Suitable for various brands. Overall length: 689 mm, diameter: 256 mm, 2x pipe: 102 mm. M100048 A P PARTS 3669 AG CHEM EQUIPMENT WR37235 AGCO WR37235 AMERICAN AUGERS 48BM5123 AP EXHAUST PRODUCTS INC 3669 APE INDUSTRI AB 3669 ARDCO ENE0004 ASTEC UNDERGROUND 306245207 BADGER 78103131 BARBER-GREENE 29H77 CASE/CASE IH S505881 CENTURY II 27Q334 CHARDONNET 7410004800 Knsdpfsuuqhxsx Akwjb CHRYSLER 2907822 CLARK 1513792 CRANE CARRIER 21042 CUB CADET 549472C1 DART MTM100048 DITCH WITCH 196332A DRESSER 101877 DROTT 505881 EAGLE TRUCK PRODUCTS E206 FMC 2236408 FORD D3HS5230GA GALION D101877 GEHL 41889 GINAF OG0000017213 GROVE 7642000009 HEAVY DUTY MFG 30015 INGERSOLL RAND 90600424 INSLEY 520340 INTERNATIONAL DCM100048 JLG 3220049 KOEHRING 125656 KOMATSU 101877 LOESING 22038 MANITOWOC 7642000009 MI-JACK 33170033 MINNPAR M6002355 NELSON 86168M NEOPART GH0201001 NEOPLAN EH0201001 P & H 27Q334 PACCAR 0561649 PETTIBONE 0RO23180090 RIKER 10024 SANDVIK 04710300 SICARD 00561649 STEMCO 1909887 SULLIVAN PALATEK TAMROCK 4710300 TEREX 125672 TOWMOTOR 680401 VERMEER 283389001 VOLVO G695424 WALGAHN-MOTORENTECHN 00810325 WALKER MANUFACTURING 21833 WHITE 027076545 = Further information = Condition: Used Part suitable for: Ginaf Reference number: M100048 / OG0000017213

Condition: refurbished (used), Year of construction: 2020, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! Knsdpfxofv Hiqj Akwob TSWa 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan mounted above the wall + Fan height adjustment Airflow: 7,200 m³ / h Motor: 0.75 kW, explosion-proof (ATEX) Exhaust pipe: 500 Ø mm Depth: 900 mm The piping should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Paint stop filter mat with clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: used, power: 18,499 kW (25,151.61 HP), fuel type: diesel, color: other, Year of construction: 1978, Number of cylinders: 6 Empty weight: 165.000 kg Width: 127 cm Track width: 12,7 cm Serial number: GS18972 Ksdsz Df R Repfx Akwenb Hour meter reading: 1,442 h Boom length: approximately 37,000 mm Fairlade Tagline Krüger Mark 4E/2 digital operator console Main drum pulling force: 20,000 kg Independent travel and swing Track width: 1,270 mm Engine: Cummins Diesel Engine type: NT855 P-310, Twin Disc three-stage torque converter Engine power: 251.51 kW Number of cylinders: 6 Operating weight: 165,000 kg Remarks: signs of use Dimensions (on-site): approximately 10,000 x 5,850 x 5,500 mm Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, mileage: 131,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: * Total tank volume 9770L, diameter 1600 mm * Hydraulically fully opening bottom flap with hydraulically actuated central locking Ksdpfxezz Tz Is Akwonb * Separation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/Sludge 6880L * Position 2: Water chamber 4360/Sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m HD hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storing the suction hose DN125 * HD pump Uraca KD718 G60 with 648 l/h * Vacuum pump Kaiser VPC 60 with 1625 l/h * Total operating hours of the vehicle: 8118 h * Hand washbasin * Cable winch, hydraulically operated, mounted on swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via radio remote control * Vehicle with radio remote control * Axle load, front axle: 8.0 t * Trailer socket 12V / 13-pin * Audio system: CD radio (Bluetooth) * Exhaust pipe extended behind the cab * Battery 220 Ah * Compressed air connection in the cab * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Suspension: front springs 8.0 t, 2 leaves * Transmission: 12-speed - Type: G 330-12 * Rear axle: differential gear 300 * Communication interface * Fenders, 3-piece * Engine compartment encapsulation, reinforced * Tag axle, steered, liftable * Auxiliary drive MB 123-10c * Parameterizable special module * Reversing warning, acoustic (warning signal externally) * Rear cross member, reinforced * Circuit breaker * Seats in the cab: driver's seat, sprung comfort seat * Sun visor, exterior * Sunblind, side window, driver's door * 12V socket in the front passenger footwell * 24V / 25 A socket in the front passenger footwell * Rotating beacon * Two-plate clutch * Oil cooler, transmission Additional equipment: * Emission standard EURO 6 * Axle configuration: 6x2 * Trailer brake, 2-line * Connections on the left, trailer socket 24V / 15-pin * Antos * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * ClassicSpace * Stowage flap, exterior left * Cab floor with engine tunnel 320 mm * Cab: mounting height 420 mm * Suspension: leaf / air * Window lifts, electric * Windshield, tinted * Generator 100 A * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Lift roof, manual (steel) * Info display 10.4 cm * Comfort locking system * Fuel tank: 290 liters, aluminum * Air intake from the front * Air compressor, 2-stage * Engine 10.7 L - 315 kW R6 Diesel (OM 470) * Tag axle, single-tired * Ramp mirrors * Waste heat utilization * Disc brakes, front and rear axle * Errors, changes and prior sale reserved.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 12/18-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1200 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Kjdszh Em Nepfx Akwenb Pressure hose length (m) 10 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) Ksdpevnuq Iefx Akwjnb - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, spindle speed (min.): 8,000 rpm, Weinig Powermat 400 4 Spindles 230 x 120 mm All Powerlock with 8000 rpm Feed speed 5–30 m/min Bottom 7,5 kW Right + Left combination motor 11,0 kW Top 11,0 kW Radiale CNC controlled setting of width and height in combination with Memory System Infeed table 2,5 m Automatic Waxilitpump Knodpfxjz Dvh He Akwjb Memory System

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 12/18-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. Kjdpfszh D N Njx Akwjnb TECHNICAL DATA: Model HDS 12/18-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1200 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Kjdpjygndpjfx Akwenb Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: good (used), Year of construction: 2020, Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm Knjdpfjyh Ebrjx Akwob -Weight: 16.8 kg