Used Okuma Multus B400-W for sale (28,943)

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm z-travel 450 mm Dusdpfx Adeyi Hv Ne Net Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: good (used), Year of construction: 2011, functionality: fully functional, Description: Dedpfey Ehaiex Ad Njut The machine is in good technical condition, with testing possible by prior arrangement. Control system: OKUMA OSP-P200MA. Power consumption: 58 kVA. Travel distance in X-axis: 1000 mm, Y-axis: 900 mm, Z-axis: 1000 mm. Description: 4 axes. Weight: 26 t. Footprint: 3.3 x 6.5 m. Tool magazine capacity: 100. Tool clamping system: BT50. Machine parameters: Travels in X, Y, Z axes: 1000 x 900 x 1000 mm.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 32,760 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, total height: 3,300 mm, total width: 5,800 mm, table load: 1,500 kg, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 48, tool weight: 8,000 g, product length (max.): 3,000 mm, number of axes: 3, This 3-axis Okuma MB66-VA was manufactured in 2010. It features a travel of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine has a table size of 1530 x 660 mm and a maximum table load of 1500 kg. If you are looking to get high-quality machining capabilities, consider the Okuma MB66-VA vertical machining centre we have for sale. Contact us for further details. • Maintenance contract: yes • Condition: About 1.5 years ago, electrical maintenance was carried out; electrical components were partially replaced or cleaned (Guides, linear axes, geometry) • Utilization: 70% • Shifts: 2 • Operating hours: 32,760 h • Control system: OSP-P200M • Table size: 1530 x 660 mm • 4th axis: possible (separately controlled) • Spindle speeds: 8000 / 12000 / 15000 rpm • Magazine capacity: 20 standard (optional 32 or 48) • Number of revolvers/magazines: 1 • Max tool length: 300 mm • Max tool diameter: 125 mm • Rated voltage: 400 V • Number of phases: 3 • Frequency: 50 Hz • Max. power consumption: 42.6 kVA Duodpfsy Ama Nex Ad Nst • Total current consumption: 61.5 A • Max. motor current: 112 A • Short-circuit withstand capacity: 15 kA • Voltage: 200 VAC, 50 Hz, 3~ • Control voltage: 24 VDC • Power: 9 kW • Weight: 50 kg Additional equipment • Optional: Zero-point clamping plate for table 1530 x 660 mm for an additional charge • Optional: Approx. 530 tools available for an additional charge Technical Specification Taper Size SK 40

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Dsdpfx Adjygtbmj Neut Max. panel length: 2500 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4

Condition: used, Okuma LB45 Duedpfx Adjy Apqqo Net

Condition: used, Year of construction: 2008, 2008 Okuma LB3000 EX CNC Lathe with Driven Tooling and Okuma OSP-P200L Control Dodsy Dr I Ijpfx Ad Nsut Max. turning ø340mm. Max. turning length: 1,000mm. Swing over bed: 580mm. Swing over carriage: 470mm. Spindle bore: ø80mm. Spindle capacity: ø120mm. Spindle speed: 45–5,000 rpm Z-axis: 1,065 mm. Y-axis: 260mm. Turret: 12-station (all driven tooling). Driven tool speed: 45–6,000 rpm. C-axis: 360° indexing. Tailstock: MT5. Spindle motor power: 22 kW. S/No. 141960 (2008) Machine weight: 6,150 kg. Overall dimensions (L x W x H): 3,500 x 1,900 x 2,000mm. Includes swarf conveyor: Approx. 4,700 x 600 x 1,500mm

Condition: used, machine/vehicle number: 008502, Max. panel width: 3800 mm Max. panel length: 3800 mm Dujdpfxsy Edp Ho Ad Net Main saw blade projection: 110 mm No of Grippers: 11

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty Dedpfxsy Aaxrs Ad Nout • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: OKUMA, controller model: OSP E-100M, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Additional equipment • Balluf read/write Dusdpfxsx D Nlzo Ad Nst • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Dujdpjyz Sn Nofx Ad Njt

Condition: used, functionality: fully functional, The machine has not been in operation for about one year. It is not connected to the power supply. The machine is available for inspection upon request. – CNC control: OSP 5000L-G CNC system (German language) – Data transmission: RS232 – Tool turret: 12-position BOLT ON type – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Non-through spindle – Spindle bore diameter: 75 mm (at a depth of 70 mm, measured from the face of the chuck and without jaws) – Spindle bore diameter: 28 mm (at a depth of 200 mm, measured from the face of the chuck and without jaws) – X axis travel: 400 x 0.001 mm – Z axis travel: 500 x 0.001 mm – XZ cutting speed: 0.01-1000 mm/rev – XZ feed rate: 12,000 mm/min – Power supply: 3 x 400V – Machine rated power: 21 kVA Dusdsyy Upaepfx Ad Nst – Maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 m (3.9 m with chip conveyor) x 1.8 m x 1.72 m – Machine weight: 4500 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm Djdeyyk I Espfx Ad Neut 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 11,500 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Dodpfswcd Evjx Ad Neut Spindle Speed: 10,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 11,500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2022, machine/vehicle number: L2E0253, CNC lathe Dujdpfxjy Axr Re Ad Net

Condition: used, Year of construction: 2019, machine/vehicle number: 0711-101349, Equipment: chip conveyor, CNC vertical machining center Dsdpfey Axf Dsx Ad Neut

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar Dodpfov S Svvjx Ad Neut - Year: 2007 - including chip conveyor - coolant tank - immediately available

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8356, Offer Number: M08L/8356 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Djdpfxjwi S A Ao Ad Nsut Make: ASAHI OKUMA Type: AF1513-4 Constr. year: 1988 diameter range: 7-15 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 10-160 mm shaft length under head: 15-130 mm output - pieces/min: 130 press power: 150 to Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1988 diameter range: 8,5 mm Duedpfewi S Aisx Ad Nst number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8001, Offer Number: M08L/8001 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO in 2nd and 3rd Make: ASAHI OKUMA Type: ORH120 Constr. year: 1988 diameter range: 14 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 90 mm output - pieces/min: 100 press power: 120 to Location: In our warehouse Dodpfxswi S Rao Ad Neut

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: M08L/8327, Offer Number: M08L/8327 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Type: RH60 Constr. year: 1989 diameter range: 3-8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm Duodpfx Aowi S Aped Nst output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: Dodpfx Aowml S Eed Njut - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: good (used), Year of construction: 1998, functionality: fully functional, Okuma MX 55, year of manufacture 1998, OSP - U 100 L control, travel X/Y/Z 1050/560/450 mm, rapid traverse X/Y/Z 40 m/min, max. table load 700 kg, table size 1300 x 560 mm, spindle speed up to 6,000 rpm, 20-position tool changer, BT 50 taper, through-spindle coolant 20 bar. Two years ago, the milling spindle was overhauled and the axis drives were renewed. Dusdpfx Ajyx Stmod Net

Year of construction: 2003, condition: excellent (used), functionality: fully functional, strip width: max. 1.500 mm strip thickness: 0,5 - 2 mm coil weight: max. 7 t Duedpfx Ajrazyqed Njt mandrel Ø: 508 mm

Condition: used, Year of construction: 1980, Machining center Duedpfxoyycv Io Ad Net

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Internal machine no.: 27 Max. turning length: 950 mm Max. turning diameter: 340 mm Max. swing diameter over cross slide: 380 mm Max. swing diameter over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder interface: BMT 2 pcs. tool turrets Dusdpfx Adsyluvie Njt A turret: 12 tool positions (all driven) B turret: 8 tool positions Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touch setter High-pressure coolant pump Enlarged coolant tank