Used Optimat Factor for sale (640)

Condition: used, EA Elektro Automatik Type: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19″ Rack – Laboratory power supply 0-80V / 0-170A, 5000W For sale is a high-quality, programmable laboratory DC power supply from the renowned company EA Elektro-Automatik GmbH & Co. KG. Nwsdpfx Aozibh Esi Tjn This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Special features: Autoranging (flexible combination of voltage/current up to maximum power) Remote Sense (up to 2.5 V compensation) Low ripple: < 10 mV RMS / < 100 mV pp Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus Analog control (0–5 V / 0–10 V) Fan-cooled, robust industrial design. Technical data: Output voltage: 0 … 80 V DC Output current: 0 … 170 A Maximum power: 5 kW Form factor: 19″ Rack, 3U Efficiency: approx. 93 % Weight: approx. 20 kg Scope of delivery: (See image) EA-PS 8080-170 3U power supply Power cable (Subject to change and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. Nodsz S Nbwopfx Ai Tewn The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: used, Used VEM three-phase asynchronous motor with 15 kW power, IE3 efficiency class, and B5 flange mounting. Manufacturer: VEM motors GmbH Type: IE3-W41R 160L 4 C TPM HW Motor number: 414123 / 0033 H Motor type: Three-phase asynchronous motor Year of manufacture: 11/2017 Rated power at 50 Hz: 15 kW Rated speed at 50 Hz: 1490 rpm Rated voltage at 50 Hz: 400 / 690 V Connection at 50 Hz: Delta / Star Rated current at 50 Hz: 28 / 16.5 A Frequency: 50 Hz Power factor cos φ at 50 Hz: 0.83 Efficiency at 50 Hz: 92.8% Efficiency class: IE3 Nodpfx Aozugakoi Tewn Number of poles: 4 Frame size: 160L Design: IM B5 Degree of protection: IP55 Thermal class: 155 F/B Weight: 175 kg Bearing, drive end: 6310 ZZ C3 Bearing, non-drive end: 6309 ZZ C3 Standard: IEC/EN 60034-1 Condition: used Location: Altenglan

Condition: used, Year of construction: 2001, Thermo-lamination system Manufacturer: BÜRKLE Type: FFAII 1300 Year of manufacture: 2001 Technical data: Working width: 1300 mm Panel dimensions Width: 200 - 1300 mm Length: 400 - 3000 mm Thickness: 8 - 40 +/- 0.2 mm Film dimensions Width max. 1320 mm (lateral overhang up to 20 mm) Roll diameter 76 or 152 mm (3" or 6") Working height above floor: 940 mm System speed: 15 - 45 m/min Three-phase drive with vector control Operating side: right Panel feed: centered System configuration FFAII 1300 - Brush machine DBM (chain brushes) - Preheating and smoothing calender GKL, D = 500 mm - Thermo-oiler heater 36 kW Nsdozuzt Sepfx Ai Town - Hardener application machine DAH + complete hardener circulation system with monitoring - Transport section + IR zones with temperature sensors - Adhesive application machine DAK + automatic level sensing - Cooling unit for DOW cooling - Adhesive supply - Conical transport section TKE - Lamination calender EKM, D = 500 mm + film unwinding station + separating station + belt transport section with operator platform for FVE - Expansion shafts - Smoothing calender GKL, D = 500 mm at the inlet of the conveyor belt - Thermo-oiler heater 96 kW for lamination calender and smoothing calender - Central control cabinet - I.S.E. Optimat ISL 111 (year of manufacture 2004) Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, turning diameter / mm centre distance / mm swing diameter / mm Manufacturer: DMG GILDEMEISTER Model: CTX 510 eco Year of manufacture: 2008 Machine type: CNC lathe / turning center Control system: Siemens SINUMERIK 810D Powerline Max. spindle speed: 3,250 rpm Spindle speed range: approx. 500–3,250 rpm Spindle power: 33 kW at 40% duty cycle / 22 kW at 100% duty cycle Spindle torque: 630 Nm at 40% duty cycle / 420 Nm at 100% duty cycle X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. turning diameter: 465 mm Max. swing / turning diameter: 680 mm Spindle bore / bar capacity: approx. 76–92 mm (depending on configuration) Front spindle diameter: 140 mm Turret: 12-station Driven tool speed: up to 4,000 rpm Driven tool power: approx. 8.4 kW Chuck: 250 mm or 315 mm Max. workpiece weight between centers: 350 kg Total power requirement: approx. 50 kVA Power supply: 400 V, 50/60 Hz Nwjdpfxjzu A Uks Ai Tsn Machine weight: 7,500 kg Incl. chip conveyor Note: All technical specifications are for guidance only and are subject to change. Actual machine data may vary due to different equipment variants and subsequent modifications. No warranty or guarantee is provided regarding the accuracy or completeness of the technical specifications. The specifications and actual condition of the offered machine are the sole determining factors.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DG18000SE-3D, overall weight: 280 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 13 kW (17.68 HP), output current: 50 A, output voltage: 230 V, nominal power: 12 kW (16.32 HP), continuous power: 12 kW (16.32 HP), total length: 1,220 mm, total width: 750 mm, total height: 810 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the mobile generator for your uninterrupted power supply needs. The DG18000SE-3D generator offers a continuous output of 12 kW with its reliable 4-stroke engine. You can operate the DG18000SE-3D generator for up to 8–10 hours with its 30-liter tank. You can start the generator via electric start or recoil start. The starter battery is charged during operation, thus enabling easy starting the next time you use it. Technical data: Maximum power: 13 kW Rated power: 12 kW Frequency: 50 Hz Speed: 3000 rpm Rated voltage: 230 V / 400 V Power factor (cosφ): 1.0 Nwodpfxjzvm A Uo Ai Ten Power: SINGLE-PHASE / THREE-PHASE Starting system: Electric start or recoil start Noise level (7m): 75–78 dB Tank capacity: 30 L Dimensions: 1220 × 750 × 810 mm Weight: 280 kg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Wide belt sanding machine / calibration and fine sanding machine Manufacturer: Homag Type: Sandteq W-100 (Optimat SWT124/RC Performa) Year of manufacture: 2020 Calibration and fine sanding machine Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x sanding roller unit / calibration roller (R-unit) Contact roller, diameter approx. 140 mm 1x combination unit / sanding roller + sanding shoe (C-unit) with electro-pneumatic pressure bar (EPS system) 1x cleaning brush with finishing brush Sanding belt dimensions: 1120 x 1900 mm Nwedpfx Aiozznh No Ten Feed rate continuously adjustable integrated infeed and outfeed table integrated control cabinet touch screen operator terminal Compressed air: 6 bar Required extraction capacity: approx. 3800 m3/h Total connected load: approx. 30 kW Weight: approx. 1900 kg

Condition: used, We are offering used pallet racking here. TECHNICAL DATA Frame: 3,000 x 1,100 mm x 70 mm Surface: galvanized Beams: 2,700 mm Box profile: 120 x 50 mm Field load: 2,400 kg Color: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 base bay + 2 extension bays consisting of: 4 frames 12 beams 2 locking pins The yellow impact protection (upright protection) can be purchased for €5.00 per piece (net). PRICES Price: €360.00 (net) Price: €428.40 (including VAT) YOUR CONTACTS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually. PAYMENT TERMS Nsdpfx Aioy Dga Es Tewn Payment terms will be agreed upon in the event of an order. The price is quoted as a unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, material handling technology, storage platforms, textile storage, and machines for retail, industry, and crafts. We offer you continuously interesting used offers from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success factors of DLK – warehouse technology | Levelmaker® | logistics | solutions

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V Nwsdpfx Aszfyu Aoi Tsn - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel with a working pressure of 16 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Pressure Vessel Professional pressure-rated construction – made of high-quality 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 16 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 16 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. Standard Equipment Connection ports: 6 pcs. G1/2" – 2 pcs. G2" – 2 pcs. G1 1/4" – 2 pcs. Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Tank capacity 500 L Maximum allowable pressure PS 16 bar Test pressure PT 22.88 bar Maximum allowable temperature TSmax 50°C Minimum allowable temperature TSmin -20°C Diameter 600 mm Height 2110 mm Weight 160 kg Nwsdpfx Aozwmlfei Ton Connections 6 G1/2" connections 2 pcs. G2" connections 2 pcs. G1 1/4" connections 2 pcs.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Nsdpfxozxxifs Ai Tjwn Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 108 kg, power: 55 kW (74.78 HP), fuel type: electric, Danfoss SH1804ABE 44.5KW refrigeration compressor for sale R410 manufacturer: Danfoss year of manufacture: 2016 type: SH180B4ABE Compressor type Hermetically sealed scroll Mode Medium temperature (MBP), High temperature (HBP) Refrigerant Freon R410A Cooling capacity EN12900 44500 W Volumetric productivity 29.6 m3/h Compression volume 170.2 cm3 Power supply 3 phase / 380-420 V / 50 Hz Power factor 3.21 Maximum operating current 27.0 A Inrush current 170.0 A Oil volume 6700 cm3 Pressure line connection 28.6 mm Nsdpoyhpl Dsfx Ai Tewn Suction line connection 41.28 mm Dimensions 317.5 × 317.5 × 682.5 mm Weight 108.0 kg Displacement, cm3/rev: 170.2 Power supply: 380-400V/3 phases/50Hz Cooling capacity, kW, R410A, ARI air conditioning (To=+7.2C, Tk=+54.4C, SH=11.1K, SC=8.3K): 44.5 Oil charge (l): 6.7 Net weight (kg): 108

Condition: new, Year of construction: 2025, table length 1000 mm table width 2000 mm table height 200 mm weight 650 kg Manufacturer: GERD WOLFF Nwsdpfx Aoymf I Sji Tjn Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Nwodpsw Rm Saofx Ai Ten Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) Nwodexl Er Hepfx Ai Tsn colloidal solutions Suspensions of viruses or phage Dairy products Gelatine Supplements and ingredients for cosmetic and food

Condition: new, functionality: fully functional, power: 18 kW (24.47 HP), rotational speed (min.): 730 rpm, rotational speed (max.): 875 rpm, input voltage: 690 V, input frequency: 60 Hz, input current: 33 A, type of input current: three-phase, protection type (IP code): IP55, Simotics/Siemens AC motor Type: 1LE16032AD534AK4-Z Construction: IM1001-B3 Standard: IEC60034-1 Input voltage: 400/460/690 V Nedpfxjxg Ntwo Ai Tswn Input current: 33.5/19.2 A Power Pn kW: 15/17 RPM: 730/875 Power factor (Pf): 0.73/0.74 Frequency: 50/60 Hz

Condition: new, Year of construction: 2026, functionality: fully functional, The FM300N transport fan is a heavy-duty industrial-grade unit designed for efficient extraction of sawdust, dust, and fine wood waste in production plants and carpentry workshops. With a high capacity of 2530 m³/h and a powerful 1.5 kW three-phase motor, the unit effectively supports woodworking processes, ensuring cleanliness, safety, and smooth operation. The FM300N is a reliable sawdust blower engineered for intensive use and long service life. Key Advantages Extraction capacity of 2530 m³/h – effective contaminant removal even during high-intensity operation 1.5 kW three-phase motor – stable performance under continuous load Universal connection system – one 130 mm inlet or two independent 100 mm inlets Damage-resistant construction – durable metal housing Energy-efficient and low-noise operation – optimized power consumption and improved acoustic comfort Design and Technology The FM300N is built on a stable, welded steel frame resistant to dynamic loads and external factors typical of industrial environments. The high-efficiency aerodynamic impeller is mounted directly on the motor shaft, eliminating transmission-related power losses and ensuring long service life. The unit features two 100 mm suction ports (or one 130 mm port), allowing simultaneous operation of two workstations or connection to large-format machines. The 400 V three-phase motor provides sufficient power and operational stability in industrial facilities. A rotational speed of 2950 rpm guarantees intensive airflow, even during prolonged operation. The entire design has been optimized for easy installation and maximum use of workspace. Precision and Performance The FM300N is a dependable sawdust extraction unit capable of transporting wood by-products generated during machining—from fine sanding dust to heavier sawdust and chips. Its high airflow capacity ensures smooth operation of production workstations, reducing the risk of blockages and limiting the emission of contaminants in the working area. Applications The FM300N is intended for professional environments where durability and efficiency are essential. It can operate as a standalone sawdust fan or as part of an advanced dust extraction system. Typical applications include: carpentry workshops furniture manufacturing plants wooden component production departments workstations with circular saws, planers, spindle moulders, and sanders Standard Equipment powder-coated steel housing Nwedpfx Aiovu Afge Tsn three-phase motor 400 V / 50 Hz suction port: 1 × 130 mm or 2 × 100 mm integrated base for stationary installation Optional Equipment bag filters flexible hoses Ø100 mm, Ø120 mm, Ø150 mm Technical Specifications Parameter Value Motor power 1.5 kW Speed 2950 rpm Extraction capacity 2530 m³/h Inlet diameter 130 mm / 2 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 430 × 410 × 450 mm Weight 24 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, overall weight: 5,000 kg, CNC machining center WEEKE OPTIMAT BHX 500, including material loading system "IgeL-ROBOT" Workpiece support (bottom) Workpiece support (top) Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vector speed: X-axis, clamping jaws = 138 m/min; Y-axis = 80 m/min; Z-axis = 50 m/min Nsdpfx Aieyyb N Hj Town Tooling (top and bottom): VERTICAL DRILLING UNIT 2 V 21 HIGH SPEED 7500 HORIZONTAL DRILLING UNIT 2H4X / 2Y NOTCHING UNIT N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode scanner, manufacturer: Datalogic

Condition: new, functionality: fully functional, power: 785 kW (1,067.30 HP), input voltage: 690 V, input frequency: 50 Hz, input current: 770 A, type of input current: three-phase, protection type (IP code): IP55, Siemens AC motor Type: 1LE55834BB347AK1-Z Njdpfxjxgt Nco Ai Tewn Construction: IM1001-B3 Standard: IEC60034-1 Input voltage: 690 V Input current: 770 A Power Pn KW: 785 kW RPM: 1492 Power factor: 0.88 Frequency: 50 Hz

Condition: used, mileage: 111,706 km, power: 62 kW (84.30 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI offers a reliable transport solution with its robust construction and an efficient 2.0-liter diesel engine. With an output of 62 kW (84 hp) and a combined fuel consumption of 7.2 l/100 km, it meets the Euro 5 emission standard. Its spacious interior offers space for three people, and the double sliding doors on both sides facilitate access and loading. The practical truck registration and the robust wooden floor in the cargo area optimize transport for commercial use. The vehicle was first registered in July 2011 and has a mileage of 111,706 km. It is painted in the striking color Broom Yellow R1032 and comes with a 5-speed manual transmission. With a length of 4,892 mm, a width of 1,904 mm, and a height of 1,970 mm, the transporter offers sufficient space and storage capacity. It has a permissible total weight of 2,800 kg and a green environmental badge, which makes it suitable for inner-city transport as well. Nwjdpfx Aisz Ntk Do Tjn The T5 Transporter is ideal for business customers looking for an economical and reliable vehicle. The price is determined by factors such as mileage, year of manufacture, and condition. Optional registration and delivery services within Germany are also available. Viewings are possible in Rohrbach (Pfalz) without prior appointment. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2016-08-30, total length: 2,100 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 2,500 kg, CONGDA 16/16/6 Counter-Pressure Filling Machine – up to 3,500 bottles/hour For sale: a CONGDA 16/16/6 bottle filling machine, manufactured in 2016. The machine underwent a complete overhaul in April 2026, which included replacing bearings, seals, springs, and other wear parts. In addition, the machine has been technically improved in several areas since it was put into operation. During this process, various original components were replaced with high-quality parts from European manufacturers. Technical specifications - Manufacturer: CGET (China) - Year of manufacture: 2016 - Configuration: 16/16/6 (rinsing / filling / capping) - Filling system: Counter-pressure filler - Filling capacity: Up to 3,500 bottles per hour, depending on factors such as carbon dioxide content and temperature - Bottle format: Set for 33 cl Longneck bottles - Weight: Approximately 2,500 kg - Documentation: Technical documentation available Complete overhaul in April 2026 In April 2026, the machine underwent an extensive technical overhaul. During this overhaul, the following parts, among others, were replaced: - Bearings - Seals - Springs - Various other wear parts Additional technical improvements Since it was put into operation, the machine has been further optimized in several areas. Various original components have been replaced with parts from European manufacturers. The most important improvements are: Nwodoz Nlcxopfx Ai Tsn - Replacement of the vacuum pump - Replacement of all sensors - Installation of a digital pressure gauge on the filling bowl - Replacement of various parts of the rinser - Replacement of the capping dies - Various other technical improvements As a result of these modifications, the machine has been technically improved in several key areas compared to its original configuration. Additional items included The machine comes with a comprehensive package of extra parts, including: - Various chain conveyor parts - Large quantity of spare parts - Extra seals - Springs - Filling tubes - Various other technical parts and wear parts Asking price: €34,900,- excluding VAT Location: Breda More information, photos, and videos are available upon request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: R4108IZLD, NEW, UNUSED ComPal Power 100 kW Diesel Generator – 125 kVA For sale: ComPal Power industrial diesel generator, model VG-R100. The generator is suitable for industrial applications, backup power supply, and continuous operation. Technical specifications: - Manufacturer: ComPal Power - Model: VG-R100 - Rated output: 100 kW / 125 kVA Nwjdpfxez Hddno Ai Tjn - Standby output: 110 kW / 137.5 kVA - Voltage: 400 / 230 V - Frequency: 50 Hz - Phases: 3 - Power factor: 0.8 - Speed: 1,500 rpm - Rated current: 125 A - Rating: Continuous - Engine model: R4108IZLD - Alternator model: Y4D - Year: 2025 - Serial No.: LB2510705-57 The generator is suitable for use as an industrial power source or an emergency/standby generator. Inspection is possible by appointment. Loading and transport can be arranged upon request.

Condition: used, Year of construction: 2008, cutting diameter 1500 mm saw band length 15050 mm cutting width 2000 mm total power requirement 45 kW weight of the machine ca. 43.500 kg required space 3862 x 2110 mm FRIGGI 2MF GANTRY 1500 x 2000 x 9000 Manufacturer: FRIGGI S.r.l. Address: Via Vitt. Veneto 13, 20086 Motta Visconti (MI), Italy Model: 2MF GANTRY Type / Version: 1500 x 2000 x 9000 Serial Number: 3610 Year of Manufacture: 2009 Weight: 43500 kg CUTTING CAPACITY Rectangular Profile: 1500 x 2000 mm Round Profile: Ø 1500 mm Gantry Stroke: 9600 mm SAW BLADE Band Dimensions: 80 x 1.6 mm Max. Band Length: 15050 mm Band Speed: 10 – 120 m/min DRIVES Band Motor Power: 18.5 kW Bow Motor Torque: 12 Nm Gantry Motor Power: 2 x 12 Nm Flywheel Diameter: 2x 1200 mm + 2x 620 mm HYDRAULICS Hydraulic Tank Capacity: 120 Liters Hydraulic Pump Flow Rate: 23 l/min Hydraulic Pump Motor Power: 4 kW ELECTRICAL DATA Installed Power: 45 kW Supply Voltage: 400 V Max. Current Draw: 80 A Frequency: 50 Hz Power Factor: 0.8 COLOR Structure Color: RAL 7039 Flywheel Covers Color: RAL 7021 Moving Parts Color: RAL 2004 TYPE PLATE / CE DECLARATION CE Marking: Yes (Directive 98/37/EC etc.) Njdpfjzk Rh Rox Ai Tjwn CE Declaration Date: 19.03.2009

Year of construction: 2011, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MY15339, Diesel generator set, consisting of an MTU diesel engine and a Marelli three-phase generator. Engine data: Manufacturer: MTU Friedrichshafen GmbH Model: 12V 2000 G65 Year of manufacture: 2011 Power output: 695 kW Speed: 1,500 rpm Design: 12-cylinder V-diesel engine Displacement: approx. 23.9 liters Weight: 2,450 kg Generator data: Manufacturer: Marelli Motori Type: MJB 400 LB4 B34 Serial number: MY15339 Rated apparent power: 1,150 kVA Voltage: 525 V Rated current: 1,265 A Frequency: 50 Hz Power factor: cos φ 0.8 Operating mode: S1 – continuous operation Nwjdpszzxa Aofx Ai Ton Protection class: IP23 Insulation class: H Weight: 2,750 kg 40 ft hc container

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 50,000 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. Nwedpfx Aiez A Dldj Tsn -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 130-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!