Used Optiturn S600 for sale (157)

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Dwodpfjwctn Hsx Akmec Ask for additional information!

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Dwodpjy Ii Dzjfx Akmoc Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Dwedpfx Aszibdtskmoc Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 20 - 80 m/min saw band length 4290 x 34 x 1.1 mm work height max. 865 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 686 kg range L-W-H 2340 x 1430 x 1550 mm The MBS 600 DGA-V model is a semi-automatic double-miter band saw for miter cuts up to 60°. The infinitely variable cutting speed and the hydraulic vise make for comfortable operation. Thanks to its solid construction, this model guarantees precise cuts when cutting hollow profiles, solid materials, stainless steel, tool steel, etc. This machine is used in metalworking shops, repair shops, mold and tool making, ... Features: - continuously variable cutting speed * for optimal adjustment to the workpiece (20â??80 m/min) - Increased cost-effectiveness thanks to semi-automatic operation - Choice of manual or semi-automatic sawing mode - Adjustable vise; clamping is manual or hydraulic - Swivel range of the saw frame (-45° to 60°) readable via a degree scale - Professional band saw offering good value for money - Smooth, vibration-free operation ensures high cutting accuracy - Optimal power transmission to the drive wheel * via a hardened and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the contact . pressure of the saw frame - Saw blade guidance via a combined roller-and-jaw guidance system * with carbide inserts Semi-automatic operation: - Hydraulic clamping of the vise - Hydraulic lowering of the saw frame - Lifting of the saw frame Dsdpfjz D It Iox Akmowc Scope of delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band saw guide with carbide inserts - Hydraulic quick-clamping vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 45 + 90 m/min saw band length 4290 x 34 x 1.1 mm work height max. 866 mm Dwedpfx Ajz D Iufskmoc voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 606 kg range L-W-H 2340 x 1430 x 1460 mm The MBS 600 DG is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Features: - Band saw guide via a combined roller-and-jaw guide system * with carbide inserts - Swiveling saw frame for double miter cuts * to the left (-45°) and right (60°) - 2 band saw speeds (45 / 90 m/min) for optimal cutting results - Robust construction, ensuring smooth and vibration-free operation - Professional band saw offering excellent value for the price - Optimal power transmission to the drive wheel via a hardened . and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the clamping . pressure of the saw arm - Sturdy gray cast iron vise with workpiece stop * Ideal for batch cutting - For cutting profiles, tubes, and solid materials made of iron . and non-ferrous materials Scope of Delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band guide with carbide inserts - Quick-release vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic end-of-stroke shut-off

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Dwedpfx Akst Hw N Hjmec Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Dodpfozibc Ajx Akmswc Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134335N324, used, in good condition, 100% functional, delivery as per photos Dwsdpfxez Act Nj Akmsc

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134835N324, used, in good condition, 100% fully functional, delivery as shown in the pictures. Dodpez Acuaofx Akmewc

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories Dedpfogcw Rijx Akmjwc PVC fenders wi

Condition: excellent (used), mileage: 871,943 km, power: 368 kW (500.34 HP), first registration: 09/2018, fuel type: diesel, tire size: 385/65-R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,870 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2018, number of seats: 2, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, retarder, second fuel tank, traction control, = Additional Options and Accessories = - 2-pedal control - Adaptive cruise control - Aluminum fuel tank - Heated mirrors - Brake booster - Differential lock - High beam - Low noise - Cab - Air conditioning - Refrigerator - Air suspension - Air-suspended seats - Air horn - Spare wheel - Rotating beacon - Sun visor - Lane keeping assist - Stability control - Immobilizer = Notes = Very nice 09/2018 SCANIA S600 6x4 with 871,943 km, 78-ton exemption, and the following features: retarder, spoiler, mudguards and side skirts, hydraulically adjustable fifth wheel coupling, 2 diesel tanks (total capacity approx. 1,000 liters), refrigerator, 2 beds, automatic climate control, SCANIA INFOTAINMENT PREMIUM with navigation, 27-inch screen, front axle tires: 385/65-R22.5 (tread depth left: 4 mm; tread depth right: 8 mm), rear axle tires: 315/80-R22.5 (tread depth left inner: 7/7, 10/9 mm; tread depth left outer: 9/10, 5/6 mm), unladen weight: 10,448 kg, permissible total weight: 30,000 kg, Dutch registration with valid periodic vehicle inspection (APK) until 01.09.2026 = Additional Information = Technical Information Dsdpjzhxg Njfx Akmswc Number of cylinders: 6 Engine displacement: 12,742 cc Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65-R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 25%; Tire tread depth right: 50% Rear axle 1: Tire size: 315/80-R22.5; Dual tires; Max. axle load: 9500 kg; Tire tread depth left inner: 45%; Tire tread depth left outer: 45%; Tire tread depth right inner: 60%; Tire tread depth right outer: 55% Rear axle 2: Tire size: 315/80-R22.5; Dual tires; Max. axle load: 9500 kg; Tire tread depth left inner: 55%; Tire tread depth left outer: 60%; Tire tread depth right inner: 40%; Tire tread depth right outer: 35% Weights Unladen weight: 10,448 kg Payload: 19,552 kg GVW: 30,000 kg Condition Technical condition: very good Optical condition: very good Identification License plate: 36-BLD-7 Further Information Please contact Arne Honingh for further information.

Condition: repair required (used), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Dwedszia Iwspfx Akmec Item description: For sale is a HAAKE RheoStress 6000 rotational rheometer from Thermo Scientific – a highly precise measuring instrument for the rheological characterization of various materials. Ideally suited for use in research, development or quality control. However, the device is not operational as the air bearing is defective. Technical specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 min⁻¹ Speed range (CS mode): 10⁻⁷ to 1500 min⁻¹ Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special features: Very high measurement accuracy due to low inertia Precise lifting device (0.5 µm setting accuracy) Modularly expandable (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, ABB ACS600 ACS60100703000F1200000 AC Variable Frequency Drive. U1 380...415 V U2 380...415V I1hd/I1n 106/90 A I2hd/I2n 112/89 A f1 48-63 Hz f2 0…300 Hz Dodjr Idq Sjpfx Akmewc Good working condition. Please check out our other listings as well.

Condition: excellent (used), RS Simulators We offer a test cabinet here. Water-cooled Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800 mm (W x H x D) External dimensions: 1100mm x 1850mm x 1500mm (W x H x D) Power consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 750kg Type: TS 600/45 Explosion-proof operation not tested However, max. 160°C in this condition Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Dwsdpfszdn Stex Akmjc

Condition: used, functionality: fully functional, ABB ACS600 ACS60100095/94 U1 3 ~ 380...500 V I1hd/I1n 7/11 A I2hd/I2n 7.6/11 A f1 48-63 Hz f2 0…300 Hz ABB ACS600 ACP60100053 U1 3 ~ 380...415 V I1hd/I1n 6/7 A Djdpfjr Nd I Isx Akmswc I2hd/I2n 6.2/7.6 A f1 48-63 Hz f2 0…300 Hz ABB ACS600 ACP60100095 U1 3 ~ 380...500 V I1hd/I1n 7/11 A I2hd/I2n 7.6/11 A f1 48-63 Hz f2 0…300 Hz Good working condition. Please check out our other listings as well.

Condition: used, Rotary valve, rotary airlock Dwodpfxjz Hxqpo Akmsc Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Elektra-Beckum BA S 600 light-duty band saw for cutting timber and other materials. Technical data: Dwjdpfozryvyex Akmec - Roller diameter: 600 mm - Weight: 160 kg - Cutting height: max. approx. 300 mm

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with stepless speed control and digital speed display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed display Precise machining Sturdy, ribbed prism bed made of cast steel, inductively hardened and precision-ground Hardened and ground bed guide rails Hardened spindle nose (DIN 6350) Guaranteed spindle nose runout accuracy better than 0.009 mm Automatic longitudinal/lead screw drive With longitudinal, cross, and compound slide Right/left rotation selectable on the control panel Emergency stop switch Chuck guard Thrust bearing Lead screw mounted in two sintered bearings Large threading range through change gear set Simple and quick speed change via V-belt Change gear drive EMC filter class B (for use in private households) Equipment details: Digital speed display Easily readable digital speed display Chip guard on the compound slide Four-position tool holder rotatable Roll-formed trapezoidal thread Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scale 0.02 mm Main spindle Hardened and mounted in adjustable precision tapered roller bearings Tapered roller bearings in P5 quality Cylindrical centering socket Hardened spindle nose with Ø 21 mm spindle bore Chuck Runout accuracy better than 0.04 mm Scope of supply: Three-jaw chuck Ø 100 mm, center-mount Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-position tool holder Change gear set Operating tool Dwjdpfocnxrcex Akmoc Model OPTIturn TU 2004V Article no. 3420310 Technical data Electrical connection 230 V / 1 phase ~50 Hz Power of spindle drive motor 600 W Spindle taper MK 3 Spindle bore 21 mm Through-hole three-jaw chuck 20 mm Tool holder mounting height max. 12 mm Center height 100 mm Distance between centers 300 mm Turning diameter max. 200 mm Turning diameter over cross slide 110 mm Bed width 100 mm Spindle speed 150 - 2,500 min-1 Number of speeds 2 speeds, speed electrically adjustable Travel of compound slide 55 mm Travel of cross slide 75 mm Longitudinal feed in range 0.1 / 0.2 mm/rev Pitch - Metric in range 0.25 - 3 mm/rev (14) Pitch - Inch in range 44 - 8 TPI (12) Tailstock mounting MK 2 Tailstock - quill stroke 65 mm Dimensions (L x W x H) 830 x 425 x 360 mm Net weight 61 kg

Condition: excellent (used), RS-Simulators Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KSS 600/75-10K Design: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulators. Suitable for temperature tests, climate tests, material and aging tests. Application in industrial testing and measurement. Dwjdpfoy H Ib Asx Akmoc Technical Data Temperature range: -75 °C to +180 °C Temperature change: Heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerant: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1400 kg Equipment RS-Simulators control panel / operating panel Program operation Observation window Temperature monitoring in the test chamber Operating hour counter Side feed-through Robust industrial design Scope of delivery RS-Simulators climate chamber KSS 600/75-10K Scope of delivery as shown in the pictures Functional test Refrigerant service Leak test Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Dwedpfsd Eauksx Akmec

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Dsdpfjrmmqzox Akmswc

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. Dwedpozy Ukbofx Akmjc For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A

Condition: like new (used), Manufacturer: Wiesheu Model: EBO 68 - 320 IS 600 Electrical deck Oven with 4 decks and proofer Dimensions: 4 x 60x80cm For 2 plates 60x40cm The Oven is complete stainless steel Easy to clean Power of 1 deck: 4.85kW Voltage: 400V / 50Hz / 3/N/PE Dwsdpsxulhaofx Akmoc

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: PM 041 815-T, Pfeiffer Vacuum Model: TPS 600 Dedpfownbxqex Akmewc Model No.: PM 041 815-T For further data see type plate illustration, device is untested.

Condition: new, Year of construction: 2026, General information Field of application: Construction Reference number: 3 Dwjdpfx Akjuc Umyemoc Drivetrain Make of engine: MS Weights Empty weight: 2.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 25-37ton Delivery terms: EXW Working pressure: 200-250 bar Required hydraulic flow: 150 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information AJCE Europe AS600H grapple is 2000kg and with hydraulic rotation. Standard with double engine, double cylinder and safety valve. It is reinforced model which is suitable for heavy demolition job. We have complete range of selector grapples available from 75kg to 2000kg. Feel free to contact us. We can ship worldwide. grijper, gripen, Pince de Tri, Greifer, Grapin,