Used Orient Cx for sale (553)

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, MGC.pl in Łaziska Górne offers for sale a compact JOHNSTON C201 CX road sweeper from 2016, sourced from Sweden and previously owned by a company specializing in maintaining the cleanliness of roads and large facilities. The machine comes from a fleet of over 20 sweepers. According to information from the previous owner, it was regularly serviced. This particular unit stands out due to its excellent condition and equipment, including air conditioning and a reversing camera. Its small size, glazed cabin, and front brush assemblies make the C201 CX well-suited for use in residential areas, sidewalks, parking lots, and tight urban environments. ENGINE AND DRIVE The C201 CX uses a four-cylinder, turbocharged diesel engine with a displacement of 2970 cm³ and a hydrostatic drive. Smooth speed control allows you to adjust the driving speed to the amount of debris and working conditions. The hydrostatic system makes it easy to start, stop, and maneuver frequently while sweeping. The CX version is designed for travel at speeds up to 50 km/h, while the sweeping speed range is 0–16 km/h. SWEEPING SYSTEM AND SCOPE OF WORK Two front brushes sweep debris towards the suction nozzle. The vacuum system transports the collected material to the waste container, and the water system reduces dust during operation. The machine is designed for collecting sand, dust, fine gravel, leaves, and small debris from paved surfaces. Example applications: Regular maintenance of the cleanliness of streets and local roads; Fjdpfx Afey U Nidjuegh Sweeping sidewalks, pedestrian walkways, and paths of appropriate width; Cleaning parking lots, bus stops, and squares; Maintaining residential areas and urban spaces; Cleaning industrial areas and logistics centers; Removing residual sand after winter road maintenance; Servicing commercial facilities and private properties. The compact design makes it easy to work between parked vehicles and in areas with limited maneuvering space. IDENTIFICATION DATA AND WEIGHTS Brand: Johnston Sweepers Model: C201 CX Year of manufacture: 2016 Serial number according to the data provided: 2000 / 207006 / 03 / 16 Maximum permissible total weight: 4000 kg Maximum permissible weight of the assembly: 4750 kg Maximum permissible front axle load: 1970 kg Maximum permissible rear axle load: 2030 kg CE marking PM10 Certified marking Acoustic power level according to the data provided: LWA 103 dB OPERATING PARAMETERS Geometric capacity of the waste container: 1.8 m³ Usable capacity of the container: approximately 1.5 m³ Fuel tank capacity: 52 l Brush diameter: approximately 850 mm Suction nozzle width: approximately 815 mm Unloading height: approximately 1545 mm Theoretical maximum sweeping performance: up to 36,800 m²/h Cataloged maximum climbing ability: up to 30% Actual performance depends on the type of surface, the amount of debris, the working speed, and the brush setting. DIMENSIONS Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm EQUIPMENT Air conditioning Radio Reversing camera Glazed operator cabin Two front brush assemblies Suction system Water system to reduce dust Hydrostatic drive

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Fedozvhkyopfx Afujgh

Condition: new, weight 540 kg diameter 1200 mm height 1100 mm 0 382 l total power requirement 1,9 kW voltage 350/50 V length in total 1820 mm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) Fedpfxeymf Hze Afuegh The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, weight 1350 kg diameter 1760 mm height 1240 mm 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base Fgodpfx Afeymf Irjujh - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change Fjdpfx Afoymf Nvsujgh - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, cutting diameter 660 mm saw band length 9000x54x1,6 mm cutting width 1,6 mm Capacity 90° - round 660 mm Capacity 90° - square 650 x 650 mm Capacity 90° - rectangle 650 x 1080 mm Capacity 45° - round 660 mm Capacity 45° - square 650 x 650 mm Capacity 45° - rectangle 650 x 670 mm Fjdpsymf R Tefx Afusgh Capacity 30° - round 410 mm Capacity 30° - square 410 x 410 mm Capacity 30° - rectangle 650 x 410 mm total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 7100 kg dimensions of the machine ca. 2500 x 2200 x 4500 mm The KSY 2DT 650 is a semi-automatic and column-guided horizontal bandsaw. The machine also has a driven roller table, which is 2 metres long on the front has a spray mist has a spray mist cooling system. Equipped with a linear guided saw blade, the KSY 2DT 650 can perform precise and fast Mitre cuts. Standard Specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Automatic Angle Rotation - PLC TouchScreen - Blade Breakage Switch / Stop System - Led Lighting - Swarf Conveyor - Carrying - 2 Pieces 2 Meter Roller Table - USB Connection Output Optional Specifications - Motorized system for roller table - Laser Line - Lubrication mist - Extra double roller table The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Year of construction: 2017, Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data - Direction of operation: RM - Capacity: approx. 2,500 bottles per hour Fedpfjyzc H Njx Afuegh - Speed range: approx. 800 – 3,000 bottles per hour - Labelling technology: Self-adhesive - Labelling station: - 1 × self-adhesive labelling unit (HERMA) - Label speed: approx. 40 m/min - Roll diameter: 300 mm - Label height: up to 240 mm - Bottle Formats - Bottle types: Swing-top (bail closure) bottles, other bottles also possible - 500 ml – Ø 66 × 280 mm - 1,000 ml – Ø 85 × 316 mm - Label Data - Label dimensions: approx. 160 × 17 mm - Application type: U-seal label - Electrical Data - Control system: Siemens S7-1200 - Operator panel: Sütron 7” - Power supply: 400 / 230 V - Frequency: 50 Hz - Equipment / Features - Alignment system for swing-top closures  - Bottle orientation system in infeed star - Conveyor height: approx. 1,000 mm - Electrical cabinet lighting - Socket integrated in control cabinet.

Condition: new, Year of construction: 2025, weight 720 kg diameter 1360 mm height 1200 mm 0 520 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Fedpfey S D H Sex Afujgh Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: new, weight 240 kg diameter 800 mm height 930 mm 0 122 l engine output 0,64 kW voltage 380 V work speed 1500 rpm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control Fgjdpfxjy S D U No Afuoh - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 1,652 kg, overall weight: 4,990 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 16,000 W, tool weight: 6,800 g, number of axes: 3, This 3-axis FADAL 4020 FX vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 1,219 x 508 mm and a maximum table load of 1,652 kg. If you are looking to get high-quality machining capabilities, consider the FADAL 4020 FX machine we have for sale. Contact us for further details. • Table • Size: 48" x 20" (1,219 x 508 mm) • T-slots: 5 x 18 mm x 95 mm • Feed rates • Cutting feed (X/Y/Z): 800 ipm (20.32 m/min) • Rapid traverse: 1,000 ipm (25.4 m/min) • Accuracy Fjdpfx Afsyn Eh Isuogh • Positioning accuracy: ±0.0002" (±0.0050 mm) • Repeatability: ±0.0001" (±0.0025 mm) • Spindle • Orientation: Electromechanical • Drive: AC vector drive • Power • Spindle motor: 17.75 HP (22.1 HP peak) • Torque: 39 ft-lbs (78 ft-lbs peak) • Optional high torque: 15 HP / 227 ft-lbs • Tool changer (ATC) • Capacity: 21 tools (30 optional) • Selection: Random, bi-directional • Max tool diameter: 76 mm (114 mm without adjacent tools) • Max tool length: 381 mm • Machine data • Power requirement: 76 A, 230 V, 3-phase • Air requirement: 120 psi, 15 scfm Technical Specification Taper Size ISO 40

Condition: used, TECHNICAL DETAILS - center height : 320 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 3000 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] POWER SUPPLY - Supply voltage : 380 [V] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Heidenhain display Fsdpfxjyn R I Tj Afuegh - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 12000 [rpm]

Condition: new, cutting diameter 650 mm saw band length 7730 x 54 mm cutting width 1,3 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 750 Fsdpfx Asyk Ih Aefuogh total power requirement 5,5 kW / 750 Nm weight of the machine ca. 4550 kg dimensions of the machine ca. 2100 x 1550 x 3900 mm The KSY 650 x 1050 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, Year of construction: 2025, weight 1350 kg diameter 1760 mm height 1240 mm 0 1210 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) Fgodpfsyk Ilbex Afuoh The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: used, Year of construction: 2022, Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  - Capacity: Up to 150 bottles/min - Operation: Continuous from bulk hopper feed - Bottle types: Plastic (PET, HDPE, etc.) - Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) - Bottle orientation: Bottom-first via pneumatic flipping device - Machine direction: Left to right - Working height: 900 mm - Frame: Welded, stainless steel (AISI 304) - Sort drum diameter: 1,500 mm - Control system: B&R industrial computer with 12.5” touchscreen, integrated diagnostics, remote access Fgsdpfx Afexqpk Doush - Electrical supply: 3 × 400 V, N, PE, 4 kW - Compressed air: 400 Nl/min at 6 bar - Machine guarding: Polycarbonate panels - Safety: Error detection with clear text display - Condition: As new (used for demonstration only) - Warranty: 12 months manufacturer warranty

Condition: new, pressure 60 t stroke max. 300 mm Fsdpfxsxfb Ike Afuegh bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 2011, Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Technical data  - Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) - Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) - Container type: glass, transparent - Container diameter: 59-67.5 mm - Container height: 226-260 mm - Closure material: metallic, closure diameter: 28 mm - Belt height: 1000 mm - Electrical connection: 400 V, 50 Hz - Max. Ambient temperature: 40 °C - Device diameter container carousel: 1150 mm - Control functions (Spectrum TX): Label control (sensors), underfill control (X-Ray), bottle breakage control, rejection - Special feature: Processing of NRW bottles with neck film Fgedpfx Ajwz Evyofush Scope of Delivery  - HEUFT Tornado W incl. 2 cold glue stations - Spectrum TX control system - 6 format parts - Without domino laser, vacuum cleaner and glue pumps  

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: Puls 300, control type: manual, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 300 W, laser wavelength: 1,064 nm, power: 5 kW (6.80 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: DC, type of cooling: air, overall weight: 64 kg, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, !! New Series 2026 !! Pulse Laser Cleaning Machine 100W to 1000W - Cleaning and processing of metal / wood / stone and other materials - 300W 1-10mj Air cooled €22,650 - 500W 15mj Air cooled €32,000 - 500W 15mj Water cooled €42,000 - 1000W 20mj Water cooled €64,000 Fgodpfx Afeufgnhsueh The machines are BRAND NEW and configured and set up according to customer requirements! The configuration and price depend on the customer’s specifications and application area and are programmed with our proprietary software! We provide professional training for operating the equipment in accordance with UAVA / UVV standards in Austria and Germany. As we are service providers and work with these machines on a daily basis, we can guarantee their functionality. We offer comprehensive on-site introductions or workshops at our premises, as well as customer-oriented demonstrations in Germany & Austria.

Condition: used, Year of construction: 2007, Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps   Fedpfx Ael Hx Awjfuogh

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: SRS CW 2000 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing the surfaces of metal, stone, and concrete. Delivery to Germany/Austria. As a service provider in the field of surface treatment, we can offer you machines that meet your needs! Transportation costs: depend on your location and delivery conditions. Delivery: 4 weeks of working days after payment receipt by air freight. - Air freight: approximately 2 weeks. The equipment is NEW and is configured and adjusted according to customer requirements! The configuration and price depend on the customer's requirements and application area. We offer professional training in the use of the equipment in accordance with UAVA/UVV standards in Austria and Germany. As we are a service provider and work with the equipment, we can also guarantee that it functions properly. We offer comprehensive on-site training or in workshops/customer-oriented demonstrations. Payment: LEASING / FINANCING / PURCHASE Technical parameters: Model: RST-FLC-2000W 2026 Laser: Fiber laser Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser length: 1064nm or 1080nm ±5 Frequency: 10-50KHz Air or water cooling Net weight: approx. 170kg Size: 98 * 122 * 143 cm Scan width: 5-50 cm Functions: Handheld or automatic Operating temperature: 0-40°C Operating mode: CW Wavelength Nm: 1025-1070 Standard output power: 15KW Laser beam quality mm*mrad: 4 Adjustable frequency Hz: 400 to 50000 Diameter of transmission fiber: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature °C: 5~35 GUARANTEED at the BEST PRICE!!! - RENT / LEASE / PURCHASE All equipment is exclusively assembled and delivered according to your requirements and our experience. - Demonstration - 24-hour support - Incl. maintenance & service & repair Fgodpfxetxlyrs Afueh We also offer the following with the equipment: INDIVIDUAL training according to the UAVA/UVA safety regulations for the operation of laser machines for surface treatment. Safety-related consulting according to occupational/safety regulations for the use of laser equipment. Regular inspection of the safety regulations according to the applicable regulations.

Condition: excellent (used), Automatic Pouch Positioning and Alignment System Automatic pouch positioning and alignment system, designed for the continuous handling, orientation, and positioning of flexible packaging within industrial processing and packaging lines. The equipment allows for the controlled and uniform placement of pouches before transferring them to the next stage of the process, facilitating the automation of lines where it is necessary for each pouch to arrive with the correct orientation. Its construction in stainless steel, protected work area, and integrated transport system make it suitable for continuous operation in professional food industry facilities. MAIN FEATURES -Type: Automatic pouch positioning system -Application: handling and positioning of flexible packaging -Automatic orientation and alignment -Continuous product handling -Integrated conveyor system -Controlled transfer of pouches -Stainless steel construction -Closed work area with safety guards -Adjustable support legs -Compact industrial configuration -Designed for continuous operation -Reduces manual handling of pouches -Integrable into existing packaging lines -Compatible with upstream and downstream equipment in the line APPLICATION The machine is designed to automatically position, orient, and align flexible pouches as they move along the production line. The pouches enter via the conveyor system and are mechanically handled until the required orientation and position are achieved. They are then transferred to the next stage of the process. This operation allows for maintaining a uniform and controlled product flow, preparing the pouches for subsequent operations where a specific orientation is required. It can be integrated with: Fgodpjzwv Tfefx Afuoh Pouch filling and sealing machines Equipment for Doypack pouches Inspection systems Checkweighers Metal detectors Pouch conveyors Accumulation systems Stackers Secondary packaging equipment Automatic packaging lines APPLICATIONS Particularly suitable for food industries, manufacturers of ready-made meals, pet food producers, and packaging companies that work with flexible formats and need to automate the orientation of pouches. Suitable for lines where the pouches must arrive at the next machine in a uniform and predefined position, reducing manual intervention and improving the continuity of the process. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Industrial Bowl Feeder and Linear Feeder, Lysta Vibrator, Used machine Manufacturer: Lysta Vibrator (Albertslund, Denmark) Type (Vibratory Bowl Feeder): D 600/750 (Serial number: 1874) Type (Linear Vibratory Feeder): 400 x 75 (Serial number: 472) Condition: Used, industrial execution Overall dimensions: 710 x 1360 x 1450 mm Technical and operating parameters: Bowl diameter: 450 – 750 mm Linear track size: 200 x 700 mm Fedozwdzdopfx Afuogh Electrical data (Bowl Feeder): 220 V / 230 V, 1 phase, 50 Hz, 3.5 A Electrical data (Linear Feeder): 220 V / 230 V, 1 phase, 50 Hz, 0.3 A Design / Operation: Electromagnetic orientation and feeding system with rotary bowl drive and linear transfer track. Suitable Application Areas: This high-precision Danish vibratory feeding system is perfectly designed for automated sorting, orientation, and feeding of small components: Assembly lines and automated cells: Feeding fasteners (screws, nuts, washers), plastic parts, or electronic components in correct orientation to assembly machines or robotic workstations. Packaging systems: Controlled, continuous, or counted feeding of small products into packaging machines. Plastics and metal processing: Orienting and singulating bulk mass components for machining, inspection, or sorting stations.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling Fjdpfxjx D Rvne Afuogh • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 16 stations + manual feeder High-stack feeder, 70 cm SFT 350 S (stitching/folding/cutting) S3 collating station with shaking function A4 landscape orientation Fgedpfx Aozrxfgjfueh Spare knife set Electronic double-sheet, misfeed and stitch wire detection 3 Hohner stitching heads, Universal 43/6 S Compressors Approx. 11.9 million stitches

Condition: used, Year of construction: 2017, Motor 3+3kW Blades diameter 400mm Pneumatic pressure 6-7 Bars Oleopneumatic saw descent system Horizontal and vertical component pushers Total machine length with extension 880cm/110cm +- 600kg Maximum straight cut length 6080mm Minimum length of straight cut 540mm Maximum cutting length with a 45° bevel 6080mm Minimum length of mini cut with 45° incline 500mm Maximum cutting length with head orientation at 45° 6080mm Minimum cutting length with head orientation at 45° 1080mm Automatic lubrication of saw cylinders Cutting lubrication on blades Mobile digital control panel following length to be realized Programmation possible Automatic support spacer for the longest lengths Fgodszwv Hropfx Afuoh Double command de protection Commissioning documents, control panel user manual and electrical diagrams 400V

Condition: refurbished (used), Year of construction: 2026, Kellenberger 1000U universal grinding machine, refurbished Technical details: - distance between centers : 1000 mm - centers height : 125 mm - grinding diameter: 250 mm - table orientation : -/+ 8 ° - universal wheelhead - grinding wheels dimensions : 400 x 50 x 127 mm - motor power : 3 kW - spindle speed : 1500 / 1700 / 2200 - orientation of grinding wheel holder headstock : 270 ° (3 x 90°) - boring for internal spindle : 90 mm - orientation of part holder headstock : 180 ° - spindle speed : 20 - 400 rpm - spindle internal cone : Morse 5 - motor power : 0,9 kW - inner cone tailstock : Morse 4 - tailstock sleeve travel: 30 mm - dimensions : 2860 x 1680 x 1670 mm - weight : 2500 kg Accessories/options: - automatic cycle works - tailstock - lubricating tank with pump - 1 internal grinding spindle Fedpfozxnf Aox Afusgh - external grinding wheels - coolant tank with paper band filter type - wheel dresser - documentations - etc... The machine is partly overhauled, included: - new geometry - new electrical cabinet - bearings replaced - new painting - etc....