Used Perlmühle Drais Bead Mill Drais Pm 25 Rl-V for sale (54,682)

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Bjdpfoycg Ryox Ahmoln Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: good (used), chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis from electric forklift EVS 25/14 -Wheels: Ø 275 x 100 mm double tires -Individual components: see photos -Price/Delivery: complete Bjdpfxswwrkce Ahmeln -Transport dimensions: 860/360/H425mm -Total weight: 206 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Blsdpfx Aov Eguyjhmsn Available: March / April 2025.

Condition: used, total length: 3,000 mm, total width: 2,400 mm, total height: 2,300 mm, Weight: 7.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 2500 - Transport dimensions: 3000mm x 2400mm x 2300mm (l x w x h) - Transport weight [kg]: 7000kg Bljdpewmq Ilofx Ahmsn - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 311,818 km, power: 70 kW (95.17 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 2,380 kg, maximum load weight: 1,120 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,250 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), Power/Engine: 2,148 cm³, with turbocharger Axles: 4x2 Brakes: Disc brakes Driver's cab: Tinted windows, electric windows, electric. Exterior mirrors, outside temperature display, JVC audio system, radio, CD player, CD changer, refrigerated body: Cold Car, deep freeze, 3 doors on the left, number of doors on the right: 3 doors, fixed partition wall, refrigeration unit: Thermo King, Multi-Temp with 2 evaporators, compressor/electric drive, cooling down to -25 °C, other equipment: power steering, immobilizer ID: 117915 Wheelbase 3250mm, ice-cooling body, Cold Car, 3 doors on the left, 3 doors on the right, Electronic Stability Program (ESP®), front axle stabilizer, battery management, electrics for trailer socket, configurable special module, radio, heated and electrically adjustable exterior mirrors, storage above the windscreen, 6-speed manual transmission, adaptive brake lights, cruise control, spare wheel, driver airbag, smoker's package, hydraulic jack. Multi-temperature for customers who require different controlled temperatures so that different products can be delivered with just one vehicle. The temperatures in the two areas can be set separately and independently of one another. This allows you to transport, for example, both frozen products at -25°C and dairy products at +3°C simultaneously in separate compartments. The unit can be powered either by electricity (220V) or by the engine while driving. We always have a large selection of used refrigerated and ice-cold vehicles in stock. You can find more information about our range at [link missing]. Non-binding offer, sale to businesses only, errors and prior sale excepted. Advertisements and company logos on vehicles may have been digitally altered in photos. Blsdpfjv R Nr Sex Ahmsn

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Bsdpfxjv D Abts Ahmjln

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point Bledpfx Aswgaqpshmjn - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor Blsdpfx Aewga Etshmon =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: ready for operation (used), Siemens 7ND2022-5GB46-1AA6-Z Compensograph PM, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Blodexahi Depfx Ahmsn

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Blsdpfx Aeympx Uehmon

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow Bledpfjx Suzajx Ahmen * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, Year of construction: 1999, functionality: fully functional, The machine is operational. Specifications: Info: Year of manufacture: 1999 X axis (longitudinal): 1500 mm Y axis (transverse): 800 mm Z axis (vertical): 710 mm Center pin - column: 800 mm Spindle head - table: 200 – 910 mm Machine weight: 12 tons Power: 21 kW Maximum speed: 6000 rpm Table: Work surface: 1700 × 650 mm Maximum load capacity: 2000 kg T-slots: 5 Slot width: 18 mm Bsdpfox R Dvkjx Ahmoln Slot spacing: 125 mm Rapid traverse: 12 m/min Feed speed: 1 - 6500 mm/min Positioning accuracy / 300 mm: ± 5 µ

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Bjdpfeyyy Dpox Ahmsln Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: excellent (used), Year of construction: 2019, Speck Anlagentechnik Speck pumping station, SPH-R-055-2 DR control system including 2 IN-VB 25-30F 11-E 3A5-055 centrifugal pumps and 2 RTG actuators + Frame and 2 2-inch stainless steel manifolds (supply/return) + 3000L tank (2 chambers) + Complete 2-inch stainless steel piping + All sensors and actuators/valves/sensors Bljdpswi Icxsfx Ahmen + Optional: approximately 250m of 2-inch hose including quick-release couplings and shut-off valves Pumps were dismantled in working order. Dismantled and packed on several pallets. Systems new price: €85,000. Item location: 75053 Gondelsheim. Used condition, see pictures. Shipping via freight forwarder or pickup by appointment.

Condition: good (used), Incremental encoder with solid shaft, absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, rotary pulse encoder, tachogenerator, incremental encoder -Manufacturer: Lenord Bauer, incremental encoder -Type: GEL 260-V-01250A201 -Shaft: Ø 8 x 25 mm -Bolt circle: Ø70 mm M5 -Number: 1x encoder available -Dimensions: 107/90/H90 mm Bodpfxow Aa Ake Ahmoln -Weight: 0.6 kg

Condition: good (used), Year of construction: 2007, +Version Heidelberg Autoplate (Automatic Plate Changing System) Ink Roller Washing Device Baldwin Cooling Prinect Classic Center Control Station Bljdpfxjw A Rgyj Ahmon Powder Sprayer Alcolor Dampening Impression Account: 115 Mio.

Condition: used, Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Blsdpfx Ajbqnhgshmsn Cat. No.: 11879 Suction capacity: 25 m³/h Ultimate pressure: approx. 0.005 mbar Motor: 400V AC Please send us your pump requirements as an inquiry.

Condition: new, Year of construction: 2021, functionality: fully functional, In-stock machine "NEW" - available for immediate delivery! (Subject to prior sale) Control system: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Load capacity: 800 kg Width of T-slots: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel ranges: Travel distances X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y-axis Roller guides in Z-axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-type) / changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct spindle drive Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around the spindle Chip conveyors on the right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other: Swiveling control panel Electronic handwheel (wired) Centralized lubrication oil / air Full enclosure Work light Heat exchanger on the control cabinet Auto-Power OFF function Hand tool set Signal light Bodpeifn N Nofx Ahmoln Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic inlet pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (including chip conveyor, discharge to the left) Machine weight: approx. 5,400 kg (net) Existing special equipment: Spindle: - Direct drive spindle SK-40, 15,000 min-1 - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Tool drum magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis drive Coolant, chip, and compressed air management: - Bed flushing - IKZ coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip cart (chip removal to the front, left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 measuring probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measuring system and tool breakage monitoring in the machine, incl. holder - Auto-Door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown in the picture with RoboJob Mill Assist 25kg (year of manufacture 2025 - NEW) - Full enclosure - Dual gripper available immediately

Year of construction: 2011, condition: good (used), Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph Bsdpfxoif Rrle Ahmeln

Condition: new, machine/vehicle number: 1010, Year of construction: 2022, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 200 mm, construction height: 1,160 mm, .: 1010 Bljdpfx Ahetw Ad Eomjn Device Details: Year of Manufacture: 2022 Load Capacity: 2500 kg Lift Height: 200 mm Operating Hours: 1 h Mast Type: None Mast Height: 690 mm Length/Width/Height: 1550 / 520 / 1160 mm Operating Weight: 65 kg Further Device Information: 1150 mm Tines 36-Month Factory Warranty Replacement Service in Case of Warranty Claim European Production The GS Series is the perfect solution for all manual transport applications. It is ideal for transporting sensitive and fragile goods, such as glass or ceramics. The Premium version also features a continuously variable lowering function. The special series offers a wide selection of fork lengths and widths to ensure the right model for every pallet type. Operating hours are generally based on the hours read. We would be happy to offer you the right transport. Another 250-300 forklifts, attachments, and sweepers are immediately available for you. Also available for rent, of course! We would be happy to buy your old one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English This offer is subject to prior sale and errors. The equipment is sold in its current condition, not refurbished, at the dealership. All information is provided without guarantee; errors and changes are reserved.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm Bodpjud Urrjfx Ahmeln -Weight: 12.7 kg/pc.

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Part of a Lisec DGU line 2.5 x 2.0 m, 1992-1994, consisting of: RSV-27/25, 1992, frame set section PSL-25/20, 1994, assembling station Bljdpfortp D Asx Ahmen Both machines are in working order and can be seen in our warehouse in Hofkirchen/Austria

Year of construction: 1971, condition: used, General / technical data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12to tractive force: 25to maximum stroke: 2000mm Bledpfolwvm Aex Ahmen clamping surface: 500 x 500 table opening: 550mm power supply: 380 Volt / 50 Hz Accessories/ special equipment: - tilting table Remark: The machine is under power in our warehouse and can be inspected.

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-50-25-PA -Piston: Ø 50 mm -Piston rod: Ø 16 mm Bljdpfx Ahsd S Dadjmsn -Stroke: 25 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimensions: 78/72/H72 mm -Weight: 0.7 kg

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h Bjdpfxoy Tbtle Ahmoln weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!