Used Press Vite Pr12Lp Steam Table 4 Whirlpool Hoods for sale (76,430)

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault Iedpfxoziawrj Ahzjid - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, functionality: fully functional, Offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD-60, 7,856 operating hours, 2 intensifiers, both operating simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD-60, 25,179 operating hours, 2 intensifiers, both operating simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48,000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Isdpfxszivhto Ahzeid Pump 4 Flow 20XR, 55,000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pumps are from a single original owner and are in good condition. The pumps have been completely overhauled by us and will be ready for operation in approximately 3 weeks. Prices available upon request.

Condition: used, functionality: fully functional, Leventi Slim 2306 with recirculating hood, 400V. Isdpfx Ahjzg Dwqozoid - 5 units in stock - Price per unit = €1950 - If you purchase 2 or more ovens, the price per unit is reduced to €1750.

Condition: excellent (used), Radial fan, conveying blower, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, press conveyor, pneumatic conveyor with injector, grain conveyor -Pressure blower: Pneumatic conveyor with filling hopper -Type: Ø 520 mm -Engine power: 4.0 kW / 2920 rpm -Volume flow rate: m³/min -Inlet: Ø 215 mm Iedpfx Aezdzq Nshzjid -Fan wheel: Ø 520 x 45 mm -Fusing funnel: Ø 415 mm -Dimensions: 1790/650/H880 mm -Weight: 119 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm Iisdpfx Ahjzdq R Eozsd -Dimensions: 675/1120/H880 mm -Weight: 83 kg

Condition: used, - Dimensions: 600x700x787 mm - Year: 2005 - Serial No.: 204T - Variable low temperature program +60/90°C - Water inlet pressure: 1.7–3.4 bar - Steam pressure: 1 bar - This is a very healthy cooking method. A fast, healthy, economical, and simple cooking process. Isdjw Em U Sepfx Ahzoid - High-pressure steam cooking offers the chef excellent portion control for steaming, braising, blanching, and cooking. - Cooking chamber: 1 - Voltage: 400V - Power: 18.2 kW

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS Iedpfx Aswbd Twshzsid -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: CBR29010, input voltage: 380 V, total width: 1,310 mm, total length: 1,400 mm, total height: 2,280 mm, control cabinet height: 2,200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, overall weight: 4,500 kg, Equipment: documentation/manual, COURTOY R292F Tablet Press Missing the two tablet chutes and the cables between the electrical cabinet and the machine. All documentation, including electrical diagrams, is present (in French). Year: 1999 Serial No.: CBR29010 Punch Type: D Iedowpuzhspfx Ahzjid Weight (kg): 4500 Production Rate/hour: 43,000 - 350,000 Compression (kN): 100 Precompression (kN): 10 Maximum Tablet Size (mm): 25.40 Outer Die Diameter (mm): 38.10 Die Height (mm): 23.81 Punch Diameter (mm): 25.40

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press For sale is a hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 20 t, specifically designed for applications in the pharmaceutical and chemical industries. The machine is ideally suited for the production of tablets, as well as for precise pressing and forming tasks in smaller batch production and laboratory applications. ==== Technical Data & Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Machine type: Tablet Press - Design: C-Frame / Single-Column Press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Total height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height above floor: 800 mm ==== Speeds - Rapid closing: 120 mm/sec - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) Iiedpfx Ahjtv Ewdszsd - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20 °C - Deflection: max. 0.3 mm/m ==== Control & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand control, optionally foot control - Safety design complies with EU standards and UVV ==== Equipment - Table top designed as a tray with 50 mm edge and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Features - Multi-tool: 8 pressing cylinders - Output: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small batch manufacturing Hydraulic press, tablet press, single-column press, C-frame press, pharma press, laboratory press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Condition: good (used), Year of construction: 2005, operating hours: 4,000 h, Compressor Boge, CL 4 – used - : Ex-works price (net): €2,950 (net) Manufacturer: Boge Model: CL 4 Year of manufacture: 2005 Iisdpfxjyhxpis Ahzed Approx. 4,000 operating hours Compressed air tank: Manufacturer: BWB H-No. 540226 Capacity: 90 L PS: 11 bar T.max: 80°C T.min: -10°C K-SK 3400 Ph: 16.5 bar Condition: good Available: immediately Location: Waltrop

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, pressure: 1 bar, 1 used low-pressure steam boiler Iiodpfx Asw I T E Ishzed ----- Manufacturer: VIESSMANN Model: Vitoplex 100-LS Output: 580 kW Steam output approx.: 800 kg/h Water content approx.: 1,316 l Permissible operating overpressure: 1 bar Year of manufacture: 2001 CE marking: 0035 Equipped with Weishaupt gas burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Year of construction: 2004, condition: used, Used Kilian E 150 PLUS single sided rotary tablet press. Has stainless steel covers. 26 stations capable of up to 16 mm tooling, EU-B of toolings. Manually adjustable fill depth up to 20 mm. Pre-pressing at 23 kN and manually adjustable main pressure up to 100 kN (10 tons). Maximum capacity 162 800 tablets per hour. Stainless steel change-speed forsed feeder. Press is driven by el. Motor 4kW/3ph/400V/50hz with frequency changer. New 2004. Iodpfxjwm Ar Aj Ahzeid

Condition: new, functionality: fully functional, operating pressure: 180 bar, empty load weight: 135 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KARCHER HDS 8/18-4 CXA PRESSURE WASHER TECHNICAL DATA: Model: HDS 8/18-4 CXA Manufacturer: KARCHER Country of manufacture: Germany Series: Professional Condition: NEW (washer in factory packaging) Type: Hot water Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 300-800 Working pressure (bar): 30-180 Maximum pressure (bar): 220 Fuel consumption (kg/h): 5.2 Water heating range (°C): min 80 - max 155 Fuel consumption in eco mode! (kg/h): 4.2 Connected power (kW): 6 Power cable (m): 5 Hose length (m): 15 Fuel tank (l): 15 Weight with packaging (kg): 135 Dimensions (L x W x H) (mm): 1250 x 650 x 920 KARCHER HDS 8/18-4 CXA EQUIPMENT: Pressure gun: Karcher Professional !EasyForce Advance High-pressure hose: Karcher Professional 15M, DN6, 250BAR, 155°C - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Power nozzle with 25° flat stream. Flat high-pressure jet with high surface coverage and good dirt removal. Pressure regulator: ServoPress pressure regulator Automatic drum: Integrated, original automatic drum WHY CHOOSE THE HDS 8/18-4 CXA? With its ability to heat water to 155°C (steam cleaning above 100°C), the HDS 8/18-4 CXA, combined with a cleaning agent, effectively removes even the most stubborn dirt. The device also uses minimal water and fuel for heating thanks to the eco!efficiency mode, ensuring economical operation. Thanks to its compact dimensions and low weight, the device can be easily transported in a station wagon. Accessory holders on the rear of the housing allow for convenient storage of the lance and power cable. The large water filter installed at the water inlet is easy to remove and clean, further protecting the pump from water contamination. Large wheels and a compact, vertical design make it easy to transport the device over uneven terrain and overcome obstacles such as curbs. AUTOMATIC HOSES REEL: The HDS 8/18-4 CXA model is equipped with a unique, automatic hose reel, which significantly improves workflow. The automatic rewind system helps keep things organized, saves time, and protects the hose from mechanical damage when reeled. The reel itself is made of the highest quality materials, ensuring trouble-free operation. KARCHER HDS 8/18-4 CXA RELIABLE | DURABLE | ERGONOMIC The HDS line emphasizes ergonomics and work comfort. Due to its compact size, the device can operate in hard-to-reach places or where work often requires multiple locations. The device is equipped with a unique, automatic pressure hose reel. Additional handles allow for transporting the device with additional accessories. A brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from contaminants that may be present in the water. Ijdpfxoy Sm Dgo Ahzjid Standard equipment includes an EASY!Force high-pressure gun with a rotating lance, a 15m high-pressure hose with an automatic reel, a pressure regulator, and a power nozzle. EASY!Force technology reduces the force required to hold the gun trigger to zero. The device also features the EASY!Lock accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is brand new and factory-sealed.

Year of construction: 2003, condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Diameter approx.: 3 m Iodsvcqz Eopfx Ahzoid Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar Ijdpfjfh Skaex Ahzoid - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Year of construction: 2007, operating hours: 138 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 900K707385, Tablet Press PRESSIMA – as new, in ex-works condition Fully functional machine with complete documentation and software. Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard. Operation Iodpfx Ahjy Hl Aqjzjid • Suitable for small batch production • Main compression force measurement with digital readout on the machine panel • Digital display of parameters set via handwheels • Note: No automatic control system available Technical Data • Speed: 10–75 rpm • Max main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Two-wheel feeder, variable speed • Drive motor: frequency controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and press area: stainless steel • Press area unpainted, easy access, hard-nickel-plated surfaces • Central extraction port • Central manual lubrication pump for punches • Automatic lubrication pump for punches and guideways • Feeder motor integrated in the headpiece Mechanics • Handwheels for tablet thickness, main pressure, pre-compression, and fill • Rotary flap between fill tube and feeder • Solid pre-compression and main compression stations • Scrapers on upper and lower punches • Magnetic brakes on lower punches • 12 mm fill shoe as standard • Lower punch is lowered after dosing • Lower guideway and ejection rail easily removable • Machine status display on control panel Measuring and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/analysis of: o Main compression (upper) o Main compression (lower) o Pre-compression (upper) o Ejection force o Scraping force o Upper and lower punch displacement • Measuring amplifiers for main, pre-comp, ejection, and scraping force included Equipment / Features • Upper and lower punch shank bores with 4.8 mm keyways for guided tooling • Chamber-type feeder • Turret hard chrome plated • Main compression force measurement incl. indicator on operator terminal • Accessory kit type 8 MX: o 4 EU-B blank dies o 4 EU-D blank dies o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Isdpetxirfefx Ahzeid

Condition: new, Year of construction: 2025, warranty duration: 12 months, total width: 1,400 mm, total length: 1,400 mm, total height: 2,000 mm, rotational speed (distance/time): 50 mm/min, Rotary tablet press SPT-TP500DH Salt production Touch screen, PLC control panel; HMI (Human Machine Interface); SPT-TP 500 DH Number of stations 33 Standard tools EU 1“(IPZ1“) Ejection/hour max. Output/Hour max.pcs 180,000 Revolutions rpm 5-50 Max. tablet dimensions Round 30 Max Tablet Dimension mm 30 Max. Filling Depth / Max. Filling Depth mm 35 Upper Punch Penetration max. / Upper Punch Penetration max. mm 1-6 Max. Main Pressing Force / Max. Main Pressure t 20 Die Diameter / Diameter of Die mm 41.30 Die Height / Height of Die mm 38.10 Diameter of Punch Barrel mm 31.70 Length of Punch mm 154 Machine Dimension with Filling Funnel Hopper mm 1,400 X 1,400 X 2,000 Machine weight / Weight kg 7,000 Power / Power Rate kW 20 Isdpfxovu Uk Us Ahzeid Voltage / Frequency Voltage / Frequency V/Hz 240/400 – 50/60

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA WASHER: Model: HDS 10/21-4MXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 173 Dimensions (L x W x H) (mm): 1330 x 750 x 1210 EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. Iisdsv Tbbdepfx Ahzed A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Isdpfx Ahsg A Hcujzjid

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Iijdpfxog A Hcqs Ahzjd

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Isdpfxsg A Hcms Ahzoid

Condition: like new (used), Manesty D3B tablet press Serial: 24D117 Iodpfx Aeiy Nnyohzoid Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph

Condition: excellent (used), Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph Isdpfx Ahjiy Nn Iezoid

Condition: used, Year of construction: 1999, GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Iiodpfx Ahsx R Amhszed Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 – 79,200 tablets / hour. Ø Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Die height: 23.81 mm Ø Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.