Used Rauheis Measuring Machine for sale (67,349)

Condition: used, Year of construction: 2020, x-travel 800 mm y-travel 700 mm z-travel 700 mm Control Wenzel max. workpiece weight 0 kg accuracy Renishaw SP 25 M Measurement inaccuray 2,6 µm repeatability 1,6 µm Longitudinal uncertainness MPE: 3,5 + L/0 µm (standard) Hodpfxszgibzo Antst Longitudinal uncertainness MPE: 3,5 + L/0 µm (extended)

Condition: excellent (used), Year of construction: 2009, 3D coordinate measuring machine Hjdpfx Anezvhrdstst Measuring range X/Y/Z: 440 x 500 x 410 mm Measuring uncertainty X/Y/Z: 2.5 + 3.9L/1000 µm Maximum table load: 227 kg Total weight: 293 kg

Condition: good (used), Year of construction: 2013, Coordinate measuring machine HEXAGON Optiv Classic 321 GL, serial number 6K012-3, with computer DELL Precision T3500, Intel Xeon processor, TESA Bugnon 38 remote control, purchased in 2013, last calibration 09/2017. Hjdpfx Ansztc A Sjtst

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Hjdpfx Aezii Dhentot Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: good (used), total height: 1,360 mm, total width: 1,100 mm, total length: 1,000 mm, -KOM 3179- Offered here is a measuring and inspection plate made of hard stone. Dimensions: approx. 1100 mm x 1000 mm x 1360 mm. Table height: approx. 900 mm. Hjdpfx Asy Auvljntjt

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 800 mm, Measuring range X-axis: 1,000 mm Y-axis: 2,000 mm Z-axis: 800 mm Granite guideways Air-bearing axes Measuring accuracy Length measurement deviation: approx. 1.3 µm plus L/400 depending on the design and calibration status Probing systems Renishaw probing heads are possible Touch trigger and scanning PH10, TP20, SP25, SP80, depending on the configuration Workpiece weight Permissible table load up to approx. 2,000 kg depending on the design Control CNC control with hand-held operator unit Software Metrosoft CM Version 3.112 WENZEL Quartis R16 Electrical supply 230 V, 50/60 Hz Power consumption: approx. 1 kVA Pneumatic supply Compressed air, 6 to 10 bar Hjdsy Ewgxjpfx Antet filtered and dry

Condition: used, Nikon Model: VMZ-R3020 XYZ travel distances: 300 x 200 x 200 mm *Type TZ with low magnification objective: 250 x 200 x 200 mm Display resolution 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Hjdpfoyiy Hbox Antst Camera Monochrome / Color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1),3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Episcopic, transmitted and 8-segment ring illumination with 3 incidence angles *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, darkfield; right objective lens: episcopic, transmitted light, darkfield Type A: Episcopic, transmitted and 8-segment ring illumination with 1 incidence angle *white LED Power supply, power consumption AC100V-240V, 50/60 Hz / 4A – 2A Dimensions & weight Main unit with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Installation footprint (W x D)4): 2700 x 2400 mm Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is non-binding!) We are happy to answer further questions for you by phone.

Condition: ready for operation (used), Year of construction: 2005, X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible. Hsdpfsy Duq Eox Antjt

Condition: good (used), Technical specifications Technical specifications will be provided shortly. The machine can be upgraded with new software according to customer requirements. Price: upon request! Installation and commissioning are possible! We will gladly prepare a detailed offer for you! Hsdpfsdl Hdmsx Antjt Note: Our offer is exclusively aimed at specialist customers! (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Condition: used, Year of construction: 1999, Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed Hedpsua Nl Esfx Antst -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 -Measuring height: 490 mm -Technical data: see photos documentation -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm -Total weight: 218 kg

Condition: ready for operation (used), Year of construction: 2013, A 3D CNC coordinate measuring machine in need of repair is offered for sale. Max. measuring range X/Y/Z: 400mm/400mm/300mm, measuring principle: hybrid (optical/tactile), optical system: CCD camera with motorized zoom optics, focusing method: contrast autofocus, max. accuracy: 1.5µm (MPE), guideways: mechanical precision guideways, base structure: granite construction, control: CNC in all 3 axes, software: WinWerth®. The Z-axis no longer moves. An on-site inspection is possible. Hjdpfoztrbdox Antet

Condition: used, functionality: unexamined, machine/vehicle number: Euro-C-A574, Used Mitutoyo Euro-C-A574 measuring table, 3-axis, in unknown functional condition (for parts or repair) Hjdew Hqrwepfx Antot Manufacturer: Mitutoyo Model: EURO-APEX574 | CMMC-F | TEMPIF-UC2 (& RENISHAW pi200-3) With red securing material for transport (see photo) Measuring range: 500 x 700 x 400 mm Weight: ~450 kg

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 190705251GC, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 20 kg, UK DELIVERY ONLY OPTIV Performance 3.2.2 Hedpfjzibg Iex Antot Bench top 10x CNC Zoom HP-S-X1C Tactile Scanning Probe 3 port changer rack PC-DMIS Measurement Software ISO 10360-7:2011 at 18-22 °C = 1.5 + L / 250 μm ISO 10360-2:2009 at 18-22 °C = 1.9 + L / 250 μm

Condition: ready for operation (used), Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible. Hjdpfeun Stiox Antst

Year of construction: 2023, condition: used, control Siemens Hedpfxszbvivo Antjt voltage 400V, 50Hz V current intensivity 40 A operating pressure 4,5 bar total power requirement 15 kW weight 1.500 kg In our assessment, the machine is in like-new condition. Technical Features - Dimensional inspection of the cooling plate using measuring heads - Automatic label application - Siemens control Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2011, functionality: fully functional, Werth Metrology: Scope - Check 650 MB Z 3D CNC 650x750x500 Standard accuracy Measuring range: X = 650 mm Y = 750 mm Z = up to 500 mm The measuring range available for measuring workpieces is determined by the sensor and accessory configuration. Machine dimensions: Hjdey Uly Sjpfx Antot W = 1230 mm D = 1560 mm H = 2550 mm Max. permissible workpiece weight: 500 kg Machine weight: approx. 1410 kg Coordinate measuring machine in bridge construction for 3D CNC operation with standard accuracy. The multi-sensor concept supports combined measurement with multiple sensors. Technical features: - Base unit on a solid base in a "moving bridge" design - Air-bearing bridge in the Y-axis with integrated air-bearing carriage in the X-axis and air-bearing Z-axis on a solid base - Maximum permissible length measurement deviation MPE in accordance with ISO 10360 or VEDI VDE 2617 (with motorized zoom optics, maximum magnification, or sensor with the same or better probing deviation) The device functions perfectly. The measuring machine can be tested on-site if desired. Important information: A computer with the operating system Windows XP is also included – it runs smoothly. Software version of Werth measuring software: - see photo. If someone wants to have a current operating system, the update must be performed independently.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: Ser. Nr. 151041, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Multisensor Coordinate Measuring Machine O-Inspect O-Inspect O-I 442 Measuring range: X = 400 mm, Y = 400 mm, Z = 200 mm Length measuring deviation according to ISO 10360-2 with VAST XXT: MPE_E = (1.9 + L/250) µm, MPE_P = 1.9 µm Hjdpfjzg Ef Njx Antot Scanning performance according to ISO 10360-4 with VAST XXT: MPE_THP = 3.5 µm in 68 s Length measuring deviation according to VDI/VDE 2617 Sheet 6.1 for Discovery Zoom objective: MPE_E2D(OT) = (1.9 + L/250) µm Permissible temperature range for specifications: 19–21 °C Machine features, equipment:  Gantry-type measuring machine with a moving machine table  Table height approx. 850 mm  Path measuring system, 0.1 µm resolution  Integrated vibration damping  PC-based scanning control (ISC) integrated  Prepared for optical camera system Discovery Zoom sensor and tactile scanning probe VAST XXT TL1  Integrated through-light system  Numerical control panel, standard with rotatable tray  Calibration sphere D = 25 mm  Calibration ring  Regularly calibrated by ZEISS  Last calibration: April 2025  Complete calibration history available  Comprehensive accessory package including VAST XXT TL1, Discovery Zoom sensor, RT-OI Horizontal Complete, grid plate, glass frame, and Calypso software  Original ZEISS documentation available The machine has been regularly calibrated and inspected by ZEISS. Corresponding calibration protocols are available. Calibrations performed:  October 2009  November 2011  November 2013  January 2015  January 2016  January 2017  January 2018  February 2019  January 2020  March 2022  April 2023  April 2025 Note: The regular calibrations by ZEISS document the continuous maintenance and proper operation of the measuring system. The corresponding calibration protocols can be made available for review upon serious purchase interest.

Condition: excellent (used), Year of construction: 2018, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, The system was hardly used (the order was cancelled). CMM DuraMax 5/5/5 ZEISS CNC coordinate measuring machine (CMM) with cantilever design. Maximum permissible length measuring deviation (MPE) according to ISO 10360-2:2009: - MPE_E0 (3D) = (2.4 + L/300) µm for 18 - 22 °C - MPE_E0 (3D) = (2.7 + L/250) µm for 18 - 26 °C - MPE_E0 (3D) = (2.9 + L/200) µm for 18 - 30 °C Maximum permissible scanning probe deviation (MPE) according to ISO 10360-4:2000 within the maximum permissible scanning test duration (MPT). MPE_THP = 2.9 µm within MPT_tau = 55 s. Single probe deviation form according to ISO 10360-5:2010. MPE_PFTU = 2.4 µm. Form measuring deviation according to ISO 12181:2011 (VDI/VDE 2617 Part 2.2). MPE_RONt (MZCI) = 2.4 µm. Hedpfx Aozb U Haontot

Condition: ready for operation (used), Year of construction: 1992, X-axis: 3000mm, y-axis: 1200mm, z-axis: 1500mm, touch probe: PH10, probing system: TP 20mm, probe diameter: 4mm, probe length: 25mm, completely overhauled in 2018. An on-site inspection is possible. With documentation. Hjdpoxt Rlusfx Antot

Condition: good (used), Year of construction: 1991, functionality: fully functional, Coordinate measuring machine DEA Gamma 1203 Hsdpfxezlqf Ej Antst Year of manufacture: 1991 Measuring range: X = 1500 mm Y = 1000 mm Z = 660 mm Measuring software: PC DMIS 3.7 Renishaw rotary indexing head PH10M Probing system: Renishaw TP20 Vibration-damped measuring table Accessories: 4 additional probing heads TP20 Extensions Various probes Calibration sphere Condition: The measuring machine is in good condition. It is serviced and calibrated every two years, and any pending repairs have been carried out by our service provider. The machine is still in use and is used for sample testing of our manufactured parts. It can be inspected during operation by prior arrangement. Delivery from our location.

Condition: ready for operation (used), Year of construction: 2008, A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Hedpfx Anezli Tuotjt

Condition: ready for operation (used), Zeiss MC 850 3D coordinate measuring machine Measuring range x: approx. 800-850mm Measuring range y: approx. 1200mm Measuring range z: approx. 600mm New software 2025 Accessories: Computer Changer Probe Hedpfxsznkule Antet You are welcome to visit us for a viewing. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe Hsdpex Szp Defx Antet weight of the machine ca. 250 t dimensions of the machine ca. 1300 x 1000 x 1600 m

Condition: ready for operation (used), Year of construction: 2010, A manual 3D coordinate measuring machine from Mitutoyo is offered. Measuring range X/Y/Z: 500mm/700mm/400mm, measuring table: granite, clamping area X/Y: 764mm/1175mm, max. workpiece height: 590mm, max. workpiece weight: 180kg, length measuring system: high-precision glass scales, resolution: 0.0005mm, length measuring system resolution: 0.0001mm, single stylus form deviation PForm,MPE: 6µm, measured single stylus form deviation: 5.15µm, repeatability range R0: 9.70µm, guide system: air bearings on all axes, axis clamping: pneumatic, probe system: Renishaw MH20i. Machine dimensions X/Y/Z: approx. 1122mm/1434mm/2267mm, weight: approx. 646kg. The machine was calibrated by Mitutoyo on 10.03.2026. Documentation is available. An on-site inspection is possible. Hjdpfxsztdt So Antjt

Year of construction: 2006, condition: ready for operation (used), Max. workpiece height: 200mm, max. load: 150kg, length: 1300mm, width: 1274mm, height: 1940mm, weight: 1.1t. Hodog E Uh Ujpfx Antjt