Used Rms Electrodynamic Vibration Shaker for sale (2,562)

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg Itjdezugqijpfx Aipjk The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: good (used), 1 x Vibrating screen for separating chips Schwanog Rapid Itjdpfoy Atkzox Aipek SBM 63 G with blower In good technical condition. Accessories: 4 x screen Dimensions: L: 970 x W: 390 x H: 110 mm The machine can be inspected while running at any time.

Condition: used, This listing is for a Eppendorf New Brunswick Innova 2300 Benchtop Open Air Shaker Ijdpfx Aioxzg Izepetk For shaking in ambient conditions. On the bench, in an incubator or in a warm or cold room, the Innova® Platform Shakers are the instrument of choice. Six ruggedly-built models provide reliable, continuous-duty shaking of test tubes and flasks to 6 liters. Low-profile shakers with Triple-Eccentric Drive for uniform motion and microprocessor controls for accurate regulation of shaking speed, 25-500 rpm (less with baffled flasks). Less than 6 inches tall to enable use of multiple shakers in an incubator or environmental chamber. Includes audible and visual alarms, timer (0-99.9 hours) with continuous operation or automatic shut-off at the end of the study.

Condition: excellent (used), Year of construction: 2025, operating hours: 3,700 h, functionality: fully functional, machine/vehicle number: 21220, total height: 1,310 mm, tank capacity: 450 l, usable tank capacity: 310 l, input voltage: 400 V, outer diameter: 1,480 mm, We offer this very well-maintained rotary vibrator RA21, manufactured in 2025. This rotary vibrator is a versatile finishing machine for deburring, rounding, and polishing parts. It offers high finishing performance, easy operation, and reliable processes. The rotary vibrator has a sloped container bottom, which reliably guides the workpieces to the integrated screening area. The large screening area with a tangential outlet ensures safe separation of workpieces and grinding media. An automatic washing system is installed, which automatically removes grinding dust from the parts. Iodpfx Aiszgti Aepstk The cleaning centrifuge is used to process contaminated process fluids. These systems are characterized by their high cleaning performance and are equipped with a separate process water tank for dirty and clean water. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1307.1986-2025/17-047, empty load weight: 1,580 kg, usable tank capacity: 240 l, water tank capacity: 200 l, The machine is unused! The machine is in a large wooden crate! TECHNICAL DETAILS Waste container volume: 240 l Water tank volume: 200 l Cleaning width: 1,900 - 2,100 mm Main brush motor power: 2 × 800 W Side brush motor power: 4 × 90 W Suction turbine motor power: 2 × 50 W Drive motor power: 500 W Filter shaker motor power: 2 × 50 W Climbing ability: 25 % Anti-slip control: Yes MACHINE DETAILS Battery voltage: 48 V Battery capacity: 300 Ah Operating time: 4–6 h Charging time: approx. 6.5 h Weight: 1,580 kg EQUIPMENT Mirrors Fan Ijdozr D S Eepfx Aipotk Rear view camera High-pressure cleaner Emergency stop switch Toolbox Lighting Direction indicator Pneumatic tires

Condition: good (used), APPLICATION BELT with VIBRATING feeder Used machine A pneumatic slide valve from the vibro-feeding roller controls the dosing onto the application belt Overall dimensions: 2700 x 1300 x 2800 mm Strap size 2400 x 140 mm Iodpfetp Hd Uex Aipotk Throat size: 1000 x 1300 mm Transport speed: 15 m/min

Condition: ready for operation (used), * Brand: Kleemann * Type: hopper with vibrating chute Iedpfx Aezmm Hhoipetk * Dim. hopper: 5000 x 2800 x 1000 mm. * Dim. vibrating chute: 3800 x 1000 mm, * Driving: two pieces vibration motors of each 3,6 kW.

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Itodpfxezlx E Ts Aipok Conveyors

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Iedpfx Aezvc Dujipjtk Main components • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. • Programmable automatic positioning. • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: excellent (used), functionality: fully functional, Trendelkamp Separation Table / Vibrating Sieve Machine – 3 Fractions For sale is a Trendelkamp separation table, model TK-K60/85, weight 200 kg. This machine is designed for the precise separation of bulk materials into three fractions by means of vibration and screening. Technical data: • Manufacturer: Trendelkamp Stahl- und Maschinenbau GmbH + Co. KG • Model: TK-K60/85 • Weight: approx. 200 kg • 3-fraction separation • Driven by electric motor with unbalance drive • Robust steel construction, screen decks made of stainless steel Itsdpow Ip Dtefx Aipok • Screens can be easily replaced upon request (different mesh sizes available) Areas of application: Ideal for plastic granulate, recycling materials, pellets, bulk materials, and other applications requiring separation into three size classes. The machine is immediately ready for use and in good condition.

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product Itedpfxjya Ahvj Aipjk - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 1,300 mm, total width: 900 mm, total height: 21,500 mm, For sale: VEMAG HP COEX Filler machine The machine is in perfect working condition. It includes a lifting device for casings. It is used for the production of processed meats in casings. Itjdjzqr Ncopfx Aipsk No. 17200111, manufactured in 2014. 3-phase; 50/60Hz; Power 1.3kW; Air quantity 1/min; SCCR-5kA rms; E-diagram 172890001c Weight: 253 kg Net price: 19,900 Euros.

Condition: excellent (used), Year of construction: 2013, operating hours: 15,159 h, machine/vehicle number: 61600, A trough vibrator (vibratory finishing machine) including centrifuge from the manufacturer Rösler is for sale. The machine is in very good condition and can be inspected on site by telephone appointment. Isdpfxjqrr A Ro Aipjtk

Year of construction: 2023, operating hours: 343 h, condition: used, functionality: fully functional, overall weight: 10,300 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0302, This module is suitable for nearly all materials (including moist or highly abrasive materials). Perfect technical screening even at high throughputs is achieved through the combination of 3D screening panels on the upper deck and tension mat technology on the lower deck. This combination enables almost blockage-free screening at accelerations of up to 50G – keeping your screening panel clean at all times. This machine is part of our rental fleet. Itsdpexgda Esfx Aipek

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total height: 1,250 mm, overall weight: 1,000 kg, total length: 1,870 mm, total width: 740 mm, type of input current: three-phase, tank capacity: 30 l, usable tank capacity: 20 l, input voltage: 400 V, power: 3.6 kW (4.89 HP), For sale is a Z4 centrifugal finishing system / vibratory finishing system for surface treatment of workpieces. The system is suitable for deburring, edge rounding, cleaning, smoothing, polishing, and burnishing of small to medium-sized workpieces. The centrifugal technology enables intensive processing with short cycle times. The machine is particularly suitable for series production, metal processing, stamped parts, turned parts, milled parts, and smaller precision components. The system is offered including a pneumatic unit and control cabinet. The Z4 features an integrated separation system for separating workpieces and grinding media, as well as a continuously variable speed adjustment of the rotating table via a frequency inverter. Technical data according to the manufacturer's data sheet Z4: Manufacturer: probably Spaleck Oberflächentechnik Model: Z4 Machine type: Centrifugal finishing system / vibratory finishing system Nominal volume of the working container: 30 l Usable volume of the working container: 20 l Operating voltage: 400 V / 50 Hz Connected power: 3.6 kW Itedpfx Aisy Uwh Ujpjk Max. speed of the rotating table: 280 rpm Ring gap width: ≥ 0.4 mm Tilting angle: 150° Space requirement: approx. 1.4 m² Width of the system: 740 mm Length of the system: 1,870 mm Height to the top edge of the system: 1,250 mm Length of the separation section: 855 mm Equipment: Centrifugal finishing system Z4 Integrated separation system Pneumatic unit Separation section / discharge Control cabinet Frequency inverter for stepless speed adjustment Working container with wear-resistant PU lining Suitable for wet machining / vibratory finishing processes Condition: Like new, used for only a few hours. Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with exclusion of any warranty/liability for defects. No guarantee is given. Errors and prior sale excepted. Inspection possible by appointment. Sale is ex works.

Condition: ready for operation (used), Year of construction: 2021, Circular Wood Saw manufactured in 2021. This CAN CUT MC 930 features a cutting width of 1,100 mm and a maximum cutting height of 50 mm. It operates with a feed speed of 5-20 m/min and can accommodate up to 15 saw blades with a maximum diameter of 250 mm. If you are looking to get high-quality cutting capabilities, consider the CAN CUT MC 930 machine we have for sale. Contact us for further details. • Cutting width: 1,100 mm • Maximum cutting height: 50 mm • Minimum panel length: 650 mm • Feed speed: 5–20 m/min • Feed motor: 0.75 kW, 1,410 rpm • Maximum power consumption: 22 kW, 380 V • Power: 30 HP • Maximum saw blade diameter: 250 mm • Saw shaft diameter: 70 mm • Saw blade speed: 3,500 rpm • Maximum number of saw blades: 15 • Working height: 900 mm • Noise level: 80 dB Additional equipment Itodpfx Aijzu S A Ropek • Automatic transport rollers: 3 pcs. • Rubber rollers between the saw blades to reduce vibration of MDF panels and wood during cutting Technical Specification Cutting Range 1100 mm Feed Speed 20 m/min

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Isdpfxjywi Das Aipjtk

Condition: like new (used), trough length 2.7 m trough width 440 mm Iodpfx Ajyaa Rbsipetk height 1430 mm safety switch

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Itodpfxoxyw Eno Aipok -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 118.858/1 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/260/H70 mm -Weight: 7.8 kg

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). Isdpfx Asx Unpvoipjtk The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: excellent (used), Pneumatic roller vibrator, pneumatic unbalance motor, vibration motor, shaker motor, shaker -Motors: unused -Type: R 120 Iodpfjb A Ntgsx Aipjtk -Working moment: 1200 cmkg -Rated frequency: 10140 to 11780 rpm -Centrifugal force: 6705 to 9100 N -Air consumption: 315 to 768 L/min -Switching level: 86 to 97 dB -Number: 3x motors available -Price: per piece -Weight: 4 kg

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Ijdpfx Aioziixrepotk Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1976, Trovalizing machine WALTHER E 5, serial number 12.238, power 0.25 kW, year of manufacture 1976. Isdjztc Axjpfx Aipjtk

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 510 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, torque: 127 Nm, bar passage: 50 mm, chuck outer diameter: 152 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine used in custom and small-batch production, operating in a single shift. Itodpfezcmmnox Aipok Excellent condition, producing parts with an accuracy of 0.01mm since its initial use. C-axis, driven tool positions in the turret, BMT connection. Programmable steady rest. Equipped with a chip conveyor and oil mist extractor. Comes with original documentation. High-rigidity roller linear guides: The robust roller guides used on the X and Z axes minimize vibration and dramatically reduce machining time. The price includes the 1.5m bar feeder shown in the picture; it can also be purchased separately if required.

Condition: used, This listing is for the Sartorius Stedim Certomat BS-T Incubator Shaker. The unit is in full working condition and ready for immediate use This high-performance incubator shaker provides precise temperature control and uniform agitation for biological cultures. It features an intuitive digital interface and a durable, spacious chamber to accommodate various flask sizes, ensuring reliable and reproducible laboratory result Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Itjdpfx Aijzltwkspsk Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory