Used Sac Bw 800 for sale (10,093)

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Mast type: None Technical condition: New Front tires type: Solid rubber Front tires condition: 100% Rear tires type: Solid rubber Rear tires condition: 100% Gbsdpfx Aozc Ahnsagjn Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Gbedpfxszc Ahhs Aagen Mast type: None Technical condition: New Front tires type: Solid rubber Front tires condition: 100% Rear tires type: Solid rubber Rear tires condition: 100% Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 230 kg, lifting height: 7,600 mm, empty load weight: 1,300 kg, construction height: 1,650 mm, fuel type: electric, total length: 1,520 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Mast type: None Technical condition: New Front tires type: Solid rubber Front tires condition: 100% Gjdpfx Aajzc Ahbegobn Rear tires type: Solid rubber Rear tires condition: 100% Description: New unit, Max. load capacity: 230 kg, Load capacity extended: 113 kg, Max. number of persons (indoor/outdoor): 2/0, Working height: 7.60 m, Platform height: 5.60 m, Overall length: 1.52 m, Overall width: 0.81 m, Overall height (rails unfolded): 2.01 m, Transport height (rails folded): 1.65 m, Platform length: 1.37 m, Platform width: 0.70 m, Platform extension: 0.60 m, Ground clearance (stowed): 6 cm, Ground clearance (elevated): 1.50 cm, Wheelbase: 1.13 m, Drive: Electric drive, Turning radius (inside): 45 cm, Turning radius (outside): 1.60 m, Drive motor: 2×24VDC/0.5kW, Lift motor: 24VDC/2.2kW, Speed (retracted): 4 km/h, Speed (extended): 0.60 km/h, Battery capacity: 24V/115Ah, Integrated charger: 24V/15A, Gradeability: 25%, Max. tilt: 1.5°/3°, Non-marking tires: 230x100 mm, Weight (CE): 1,300 kg Proportional controls,

Condition: used, Year of construction: 2001, operating hours: 1,782 h, 2001 | Bomag BW 100 AC-3 | Used Combi Roller | 1782 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Godpfxszcp Sgo Aagobn 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 36 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is mechanically sound and operational, but requires some minor repairs before being deployed in the field. The main functional issues are a broken water drain pump (irrigation system), a fuel hose leak, and leaks at hydraulic fittings. On the exterior, the scraping bars (drum scrapers) are missing, and some headlights are broken or removed. Overall, the main structure and transmission are in good condition, but the unit requires basic maintenance (plumbing, electrical, and scrapers) to be fully operational. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40723 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 19,816 km, power: 160 kW (217.54 HP), first registration: 03/2009, fuel type: diesel, overall weight: 11,000 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro4, loading space length: 4,150 mm, Equipment: air conditioning, all wheel drive, Vehicle No.: 134-25 IVECO EUROCARGO ML 100 E22 WM-BW Gjdpfx Aaey H Td Ajgebn from GERMAN ARMY STOCK IDEAL for CONVERSION / CAMPER / EXPEDITION, etc. • PTO / Auxiliary Drive • First registration: 03/2009 • ALL-WHEEL DRIVE 4x4 • Wheelbase: 3,700 mm • Emission standard Euro 4 / AdBlue • Camouflage paint • 6-speed gearbox • Differential lock • Gear reduction • Trailer coupling: NATO, coupling heads • Electric mirrors / heated • 1 x sleeper bunk • 3-seater cab • Air conditioning • Unladen weight: 7,420 kg • Payload: 3,580 kg • Condition: AS NEW! Inspection possible anytime during our business hours, test drive by appointment only. For export sales, a deposit will be withheld and refunded after receipt of the Certificate of Arrival. Company logos or advertising decals on the vehicles may have been digitally edited in the photos. No guarantee is provided for the functionality of the extras. All information is given without guarantee – errors, changes, typos, and prior sale excepted. Vehicle descriptions do not constitute guaranteed properties. Please refer to our general terms and conditions and acknowledge these.

Condition: used, mileage: 36,310 km, power: 160 kW (217.54 HP), first registration: 06/2009, fuel type: diesel, overall weight: 11,000 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro4, loading space length: 4,200 mm, Equipment: air conditioning, all wheel drive, Vehicle No.: 420-25 IVECO EURO CARGO ML 100 E22 WM-BW from GERMAN ARMY STOCK IDEAL for CONVERSION / CAMPER / EXPEDITION etc. ? PTO / POWER TAKE-OFF * First registration: 06/2009 Gjdpfxjx Axn Ae Aagebn * ALL-WHEEL DRIVE 4x4 * Wheelbase 3,700 mm * Emission standard Euro 4 / AdBlue * Camouflage paint * 6-speed gearbox * Differential lock * Gear reduction * Trailer coupling: NATO, coupling heads * Electric mirrors / heated * 1 x sleeping berth * 3-seater * Air conditioning * Curb weight: 7,420 kg * Payload: 3,580 kg Viewing possible anytime during our opening hours, test drive by appointment! For export sales, a deposit will be withheld and reimbursed upon receipt of the confirmation of arrival certificate. Company logos or advertising on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the additional equipment. All information subject to change without notice – errors, changes, typos, and prior sale reserved. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our General Terms and Conditions and acknowledge them.

Condition: used, mileage: 29,064 km, power: 130 kW (176.75 HP), first registration: 05/2023, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 5,190 mm, loading space width: 2,490 mm, loading space height: 2,290 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Mercedes Benz Atego 818 Refrigerated Box Truck THERMO KING T-800 R whisper * First registration: 09.05.2023 * 130 kW * 5132 cc * Automatic transmission * 29,064 km * Front axle: 4.1 t * Rear axle, crown wheel 325, hypoid 6.2 t * Axle ratio i=3.417 * ABS & ASR * Disc brakes on front and rear axles * Wheelbase: 3620 mm * Rear axle stabilizer under frame * ECE compliant * Driver’s air suspension comfort seat * Passenger fixed seat, standard * Armrests on both sides * Velour seat covers * Air conditioning * Light sensor * Rain sensor * Axle configuration 4x2 * Rear axle air suspension * Radio with USB and Bluetooth * LED daytime running lights * Tail lift package * Front suspension: 3.6 t parabolic spring * ESP * Lane Keeping Assist (ESP) * Lane Keeping Assistant * Active Brake Assist * Cruise control * KIESLING body with two side doors * ATS warranty according to general terms and conditions, 3 years / 250,000 km * Tyres: 1st axle 215/70 R 17.5 9/9 mm & 2nd axle 10/10/10/10 mm * THERMO KING operating hours: Gbedsxp Th Rjpfx Aagjn * Mains operation: 81 * Diesel engine operation: 1022 * Two compartments * All information subject to change

Year of construction: 2016, condition: good (used), 1 used hot water parts cleaning system Manufacturer: Bio Circle Type: HTW II 800 Year of manufacture: 2016 Material: Stainless steel Electrically powered rotating basket Effective and cost-efficient Overall width: 1175 mm Overall depth: 1145 mm Height with closed lid: 1380 mm (with exhaust bend) Height with open lid: 1780 mm Inner diameter of the mesh basket: 800 mm Max. usable height: 400 mm Max. payload: 350 kg Tank capacity for cleaning fluid: 150 liters Electrical connection: 6 kW Voltage: 400 volts Frequency: 50 Hz Flow rate of the cleaning pump: 4.8 m³/h Spray pressure: 2.5 bar Electric heating in the washing tank: 5.3 kW Treatment temperature: 10°C to 85°C Godpfozb Iyasx Aagobn Load capacity: 150 kg Fresh water connection: 1/2″ Drain valve: 1 1/4″ Weight: 330 kg

Condition: ready for operation (used), Heidenhain ROD 800 36000 H5 angle encoder. 219 845 21, SN: 2133393B, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Gbsdpfex Er Svox Aagjn

Condition: ready for operation (used), AEG / Schneider Modicon AS-B872-100 800 I/O ANALOG OUT4-20MA 4CH, serial no. 20032987, used, normal signs of use, 100% functional, scope of delivery as per photos Gjdpfx Aasi D Tt Togjbn

Condition: ready for operation (used), Volland Telemetry MICRODAS B1 Type: BW 2, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Gbjdpexaigdefx Aagon

Condition: ready for operation (used), Northrop Grumman 800-336-2112 / 609818X112 General Purpose Inductor, used, normal signs of use, 100% functional, scope of delivery as per photos Godpsi D I U Dsfx Aagjbn

Condition: ready for operation (used), Festo ELGA-TB-RF-70-800-0H+MF / 1371245 toothed belt axis, used, in good condition, 100% functional, delivery as per photos. Gedsx Ernkepfx Aagobn

Condition: ready for operation (used), Omron Adept eCobra 800 industrial robot ID-SN: 595-00114, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packaging and shipping! Gsdpfxox Dw Rro Aagjbn

Condition: ready for operation (used), Maho milling head from Maho 800 C, used, normal signs of use, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and transport! Godpfx Aajx Et Hnogebn

Condition: ready for operation (used), Viscotherm main unit EMS Z.Nr. 3-800. 165 F.Nr. HW 2.04, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Gbodpfxjxaifyj Aagon

Condition: ready for operation (used), Heidenhain ROD 800 36000 / K7 angle measuring device. 219 845 21 SN:2829928B, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos Gjdpfx Aaekxh Dhsgebn

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 1-00 keyboard + 3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in photos. Gjdpfx Ajx Equ Noagsbn

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gbodpfx Ajtvct Hoagjn

Condition: used, functionality: unexamined, Year of construction: 2021, An RCS 800 3.0 retail cash system, manufactured in 2021, is a professional cash management system for retail/point-of-sale applications. Depending on the configuration (coin module, note recycler, safe, side cabinet, etc.), the new price often ranged well into the five-figure range. Gbjdpfxjzcw Dqe Aagen

Condition: ready for operation (used), Year of construction: 2002, operating hours: 35,816 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 16,800 W, number of axes: 3, This 3-axis HERMLE C 800 V was manufactured in 2002. It features a spindle speed range of 20 to 10,000 rpm and a spindle power of 25 kW. The machine has a net weight of 7,000 kg and includes additional equipment such as a cooling unit and a jib crane. If you are looking to get high-quality machining capabilities, consider the HERMLE C 800 V vertical machining centre we have for sale. Contact us for further details. Gbodpozcylqefx Aagen - Control Unit: Heidenhain (Control On: 114,325 hours)- Machine On Time: 111,736 hours- Program Run Time: 40,346 hours- Spindle On Time: 35,816 hours- Drive On Time: 76,783 hours- Axes In Motion: 37,963 hours- Operation Voltage: 400 V / 3 ~- Frequency: 50 Hz- Control Voltage: 24 V =- Total Nominal Current: 63 A- Total Rating: 43 KVA- Spindle Speed Range: 20 to 10,000 rpm- Spindle Diameter at Front Bearing: 70 mm- Tool Taper/Spindle Interface Options: SK 40 (ISO 40 similar to DIN 2079) or HSK A63 (DIN 69063)- Tool Clamping Retention Force (SK 40): 9 kN- Tool Clamping Retention Force (HSK A63): 18 kN- Spindle Power (40% / 100% ED): 25 / 16.8 kW- Spindle Torque (40% / 100% ED): 159 / 107 Nm- Maximum Spindle Speed with Open Guard Doors: 3,000 rpm- Additional Equipment Included:* Cooling Unit / Chiller (FLKS 170)* Line Filter (LF BN/HC 110 G 5 B 1.0)* Ventzki Chip Hopper / Dumpster (Model LC-805-500 L, Max Capacity 1500 kg, Tare 156 kg)* ABUS Jib Crane (Load capacity 500 kg) mounted near or to the machine site* Floor cooling fan

Condition: used, Used Vehicle * Vehicle No.: - * Mulag Boom Mower MHU 800 Year 2000 * Equipped with mulching head * Driven by hydraulic system * Operated via 2 joystick consoles * Includes 4 support stands * Sale is on behalf of the customer Gbjdpfxjup Nw Is Aagen ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale is only to businesses or export. The above data, photos, and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed specification in the legal sense of a purchase. All information/specifications are provided WITHOUT WARRANTY. Subject to change, prior sale and errors excepted! The equipment list does not form part of the contract and must be checked in detail on site at the vehicle by each prospective buyer before purchase. Subsequent claims will not be accepted.

Year of construction: 2021, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). KSW Deep Dig Bucket / Bucket / OQ65 / 800 mm / Year of manufacture: 2021 / In stock & immediately available Price: €2,490.00 net / €2,963.10 gross - Cutting width (mm): 800 - Own weight (kg): 515 - SAE capacity (liters): 620 Equipment: - Incl. OQ65 attachment In our warehouse, we have a very large selection of various buckets that are immediately available! Gjdpfjzcuc Rjx Aagsbn Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 420201 = Further information = New: No Intended use: Construction Unladen weight: 515 kg Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Briquette press Manufacturer: Weima Type: TH 800 S Year of manufacture: 11/2019 Briquette press for highly compressed, round briquettes Briquette diameter: 80 mm Control cabinet with Siemens Simatic PLC control system Gjdpfxezcf Eps Aagsbn Main motor (hydraulics): 22 kW Pressure: 250 bar Voltage: 400 V, 50 Hz Current: 55 A Fuse rating: 63 A Weight: approx. 3000 kg

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Gjdsy Ivyijpfx Aagebn Coolant system 980 liters with belt filter Conveyor belt Oil mist separator Chip conveyor without bar feeder