Used Sba Transformer for sale (917)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. Itjdpfx Agsz Sx Nqs Aen * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation.

Condition: used, ElaQprem B rubber insulating mat, 1.20m wide, 10m long, 4.5mm thick, grey, NR/SBR, roll from MÖLLER · For equipping transformer and high-voltage switchgear rooms where safety measures are required, e.g. the use of tested insulating mats. · In addition to providing personal protection. Itsdpfx Agjz T E Nto Asn

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Itodpfoxyhnyjx Ag Aen Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: used, This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Itodpoxxy Uijfx Ag Aen Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Itodpozy Hx Dsfx Ag Asn Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: like new (used), Year of construction: 2020, operating hours: 3,270 h, functionality: fully functional, overall weight: 20,000 kg, Equipment: chip conveyor, documentation/manual, REIDEN RX 10 CNC control system: SIEMENS SINUMERIK 840D solution line, Sinumerik Operate 5-axis simultaneous machining 5-axis machining center with a 5-position pallet changer Travel ranges X-axis = 1,000 mm Y-axis = 1,100 mm Z-axis = 810 mm A and B axes Automatic horizontal/vertical swivel milling head as a fully functional, stepless NC axis from -1° to +90° NC rotary table NC rotary table Ø 1,000 x 800 mm - 360° continuously rotatable - Swivel circle Ø 1,350 mm - Table height above the workshop floor 1,050 mm - Max. table load 1,600 kg Main spindle drive DDT Speed 16,000 min-1 - Main drive 38 kW (100% duty cycle) - Torque 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder HSK 63-A Tool changer and tool magazine designed for 260 tools with HSK-A 63 Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter Laser tool setting, wear measurement and breakage monitoring, LC 50 version, Radio measuring probe, manufacturer Renishaw RMP 60 with HSK63-A Change station with H-gripper - Complete rotary table unit incl. zero-point clamping system - Additional pallet carrier with 4 pallet positions - Loading station that can be loaded with a crane - 5 pallets ø 1,000 x 800 mm, incl. MDynamics package for 5-axis machining - Advanced Surface application memory on CF card - Spline interpolation - Transmit and surface transformation - Automatic measuring cycles - 3D simulation - Sketching - ShopMill / ShopTurn - Work step programming - Residual material detection - Machining package for 5 axes - 3D tool radius compensation - DNC data transfer via LAN - Kinematics measurement (if measuring probe is available) - Programmed according to REIDEN standard Cooling unit / cooling system Iodpfxoz Dn Hbe Ag Ajtn Water cooling system for milling head, rotary table motor, all feed motors and various bearing points 3 cooling circuits, cooling capacity 7 kW, tank capacity 40 l.

Condition: used, mileage: 112,707 km, power: 78 kW (106.05 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 01/2027, fuel: diesel, fuel consumption (urban): 9.3 l/100km, fuel consumption (extra-urban): 7.8 l/100km, fuel consumption (combined): 8.4 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, total length: 6,840 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2014, construction height: 2,850 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The Iveco Daily 35 S11 with automatic transmission is the ideal choice for anyone who values reliable technology, practical storage space, and comfortable driving in their daily work. Especially in commercial applications, the combination of automatic transmission, reversing camera, and professional shelving quickly pays off: get in, drive off, and work with focus. The 2.287-liter engine, with 112,691 km on the odometer, provides a solid foundation for upcoming jobs. Thanks to the automatic transmission, even frequent starting and maneuvering in city traffic becomes significantly more pleasant. The reversing camera provides additional visibility and makes precise maneuvering easier – especially where every centimeter counts. The already installed shelving transforms the Iveco into a real mobile workplace. Tools, materials, and spare parts can be stored neatly and are quickly accessible. This saves time in daily use and ensures that you can concentrate on your actual work. With its initial registration in 10/2014, this Iveco Daily combines proven commercial vehicle quality with equipment designed for practical and efficient use. Anyone looking for a versatile van with automatic transmission and who does not want to invest in an extensive interior conversion will find a particularly interesting opportunity here. Iveco Daily 35 S11 – get in, organize, drive off, and work more productively. Itodpfjzz Tlmjx Ag Aon For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Year of construction: 2019, condition: good (used), Pallet wrapper, – used –: Price ex works: €1,950 (net), including loading! Manufacturer: Robopac Model: Ecoplat Plus Base Type: Rotary Table Serial number: 30188020 Year of manufacture: 2019 Turntable diameter: approx. Weight: approx. 345 kg 230 V, 50 Hz, 8.5 A, 1.2 kW Manufacturer data: Length (mm) 2490 mm Width (mm) 1640 mm Height (mm) 2610 mm Film width max. (mm) 500 mm Film thickness min. (µm) 17 µm Film thickness max. (µm) 35 µm Film core diameter max. Ø (mm) 76 Ø mm Film roll diameter Ø (mm) 300 Ø mm Film stretching: Manual Film pre-stretch min. (%) 0 % Film pre-stretch max. (%) 0 % Film roll weight (kg) 20 kg Film carriage type FRD Film carriage speed max. (m/min) 4 m/min Processable product length max. (mm) 1200 mm Processable product width max. (mm) 800 mm Processable product height min. (mm) 400 mm Processable product height max. (mm) 2200 mm Pallet processing capacity (pallets/h) 30 pallets/hr Rotation speed min. (rpm) 4 rpm Rotation speed max. (rpm) 10 rpm Condition: good Iedpfxjzpf Rde Ag Aetn Available: immediately Location: Erfurt area, later in Frankenberg warehouse

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. Itsdpfx Agjzn Aymj Aon A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Itjdjzt Nbzspfx Ag Aen Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details. Isdszxy Ivspfx Ag Aotn • Tool holder type (tool turret 2): BT40 • Operating hours: 5,500 • Power supply: AC 380 V, 50/60 Hz • Rated power: 40,61 kVA • Transformer capacity: 5 kVA • Full-load current: 64,67 A • Short-circuit capacity: 10 kA Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Iodpfxoz E R Ido Ag Aetn Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: Iedpez Hbt Hefx Ag Aotn • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Itsdpfx Aoyhzhzog Asn Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: used, mileage: 12,141 km, power: 132 kW (179.47 HP), first registration: 10/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, LED lighting, rear step over half the width, rear wing doors without window cut-outs, sliding door on the right, multifunction steering wheel, double passenger seat bench, hill start emergency braking lane change side wind assistant, reversing camera, DAB+, USB data socket only, MAN Media Van, cell phone interface, winter package, wooden floor in the load compartment with rear loading edge protection, C-rails on the side walls, partition wall with sliding window, lashing eyes Iedpfx Agey Hfaij Aetn

Condition: like new (used), GBS Test Pulse rev3 Pulse Generator for Long-Term Insulation Tests The Test Pulse system is designed for long-term insulation tests on test specimens with a capacitance of up to 6 nF. Converter for High-Voltage Test Transformer * Internal sine wave generator: 50-200 Hz. Itjdpou Egz Rsfx Ag Asn * Pulse width modulation 16-24 kHz of the sine wave via a full-bridge. * Converter voltage adjustable from 0-600V, Imax=2.6A, maximum power 1.3kW * Pulse current limitation 110A (shutdown threshold) Pulse Transformer – Drive * Drive via a full-bridge * Full-bridge power supply adjustable from 0-1000V, 1.3A max. * Pulse current limitation 100A (shutdown threshold). * Pulse width 20-120μs, nominal 94μs, adjustable * 2 selectable series inductances 150μH, 300μH, to adjust the pulse width and rise times to the load capacitance and voltage. * Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. * Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave. * Cosine-shaped pulse at the transformer output Pulse Transformer Cascade * Output transformers in a 5-stage cascaded circuit. * Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. * Maximum output voltage 15kV with possible load capacitances of: * 6nF with a pulse width of 73μs at a repetition frequency of 2.5kHz * 10nF with a pulse width of 103μs at a repetition frequency of 1.25kHz * Voltage divider 1:1000 in parallel. * Overvoltage protection at approximately 20-23 kV via parallel spark gaps * Thermistor for overtemperature detection in the 1st transformer stage. * Earth-side current measurement socket 100 mV/A. Breakdown Detection, Testing * If the maximum bridge currents for the transformer drives or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. * The device has a resettable operating hour counter to determine the test time. Manufacturer's price approx. €59,500.00 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Part suitable for: trucks Price: On request VAT/margin scheme: VAT deductible Iodpfx Asyyyaqog Astn Type number: 1329046003

Condition: used, Part suitable for: trucks Price: On request VAT/margin taxation: VAT deductible Ijdpfx Ajyy I Euog Aotn Type number: 1353030018

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German Itedpox T Ah Dofx Ag Asn - EC Declaration of Conformity 98/37, Annex IIB

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Mori Seiki (Fanuc), controller model: MSX-701 (Fanuc 31i), workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,200 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 4,300 mm, spindle speed (max.): 8,000 rpm, coolant supply: 70 bar, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Mori Seiki. The machine is fully functional, in good condition, and can be inspected and tested at our facility. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control unit: MSX 701-III Technical specifications: Travel distances X-Y-Z: 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Pallet size: 800 x 800 mm Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2200 kg Max. workpiece diameter: 1450 mm Max. workpiece height: 1450 mm Spindle speed: 8000 rpm Spindle power: 37 kW Ijdpfjyrdn Ujx Ag Ajtn Tool holder: HSK-A100 Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1300 mm Distance between pallet center and spindle nose: 100–1450 mm Total power consumption: 86 kVA Machine dimensions: approx. 7200 x 4300 x 3850 mm Transport dimensions machine: approx. 7000 x 3400 x 3300 mm Machine weight: approx. 30 t Total weight incl. magazine and accessories: approx. 37 t Scope of delivery includes: 1x Mori Seiki NH8000 DCG machine 1x Matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer Various tool holders

Condition: used, Part suitable for: trucks VAT/differential taxation: VAT deductible Type number: 1700557 Itsdpfx Aeyrgtgog Ajn

Condition: used, Part suitable for: trucks Iodpfx Aeytfc Aeg Ajtn Price: On request VAT/margin taxation: VAT deductible Type number: ATRA 975

Condition: used, Part suitable for: trucks Price: On request VAT/VAT regime: VAT deductible Iodpsytfxdjfx Ag Astn Type number: 1315767

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Ijdpedfcqaofx Ag Astn Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, MDP-01 SPOT WELDER 10 kW Ijdpjfwxr Tefx Ag Astn High-performance transformer 5 levels of power regulation Possibility to work with 2 x 230V (380V) power supply Bottom sliding handle The range of welded sheets: 0.4 + 0.4 to 2 + 2 mm Width: 490mm Length: 1010mm Height: 1100mm Weight: 130kg Power supply: 380V / 3phase / 10kw