Used Schan Shaft Coupling for sale (10,777)

Condition: used, Year of construction: 2020, operating hours: 602 h, Arjes IMPAKTOR 250 - 2 sets of shafts - INCL. STAR SHAFTS Year of construction 2020 Hours 602 Original paddle shafts - Armored. Included and mounted, W-E-R-T original star shaft (only 15h - like new) Easy to repair in contrast to the original paddle shaft. Ideally suited for: - Wood - old wood - Rootstocks - tires - Light building rubble Tracked undercarriage and hook lift version Length (mm) 7,700 / 7,300 (transport) Width (mm) 2,300 / 2,300 (transport) Height (mm) 3,500 / 2,800 (transport) Total weight (kg) 14,000 Nedpfx Acer Epxljfewh DRIVE EU US ROW* Engine type (Volvo Penta) Exhaust emission standard EU Stage V Bonfiglioli transmission OUTPUT BELT Discharge height (mm) 3,450 Width (mm) 800 Including overbelt magnet and water spraying system SHREDDING UNIT Hopper volume (m3) 2.25

Condition: used, Year of construction: 1991, overall weight: 2,300 kg, power: 18.5 kW (25.15 HP), VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been completely overhauled and technically upgraded in 2025 and is fully operational and ready for use. The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to the start position. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. The PLC system also allows adjustment of key operating parameters depending on the material being shredded, including maximum working power, shutdown power threshold, and the forward movement speed of the hydraulic press. This makes it possible to optimize the machine for different materials and ensures efficient and safe operation. Technical Specifications: • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Throughput: up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Speed: 1455 rpm Voltage: 400 V / 50 Hz Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Nwjdot Dh T Dopfx Acfjh Condition: fully operational after maintenance.

Condition: used, functionality: fully functional, Equipment: CE marking, Complete BARMAC 200 vertical shaft crusher consisting of a machine frame and discharge chute, electric motor, electrical control panel, and operator panel. GRAVIPAC 1000 vertical shaft crusher consisting of a complete frame, machine, motor, pulley, and belt. Nwjdpfx Acex Th Eujfsh

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) Nwjdpfx Aezadatocfjh (Prices subject to change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm Njdpfszac U Aox Acfjwh - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Year of construction: 2005, CATALOGUE NUMBER 7905 Technical data: - max cutting height 160mm - max element width 700mm - working width of the saw mandrel 600mm - mandrel diameter 70mm - max saw diameter 450mm - from above: - feed pawls - 2 toothed feed mandrels - pressure roller with metal sliding guide - from below: - sliding guide roller - feed pawls - toothed feed mandrel - saw mandrel - smooth feed mandrel - metal sliding guide roller - 6 feed speed settings - feed motor 0.9kW - main motor 45kW - overall dimensions (L/W/H) 1500x1350x2000mm - weight approximately 2695kg Nwsdpfszab Dvox Acfoh ADVANTAGES – Polish production – Robust construction – Used machine, very good condition Net price: 55900 PLN Net price: 13310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Nwjdpjzabi Esfx Acfjh Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Nwedpfx Acey Tia Tefjh Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Note: The machine is in good working order. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Inspections are possible at any time by appointment. We will also be happy to answer any questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty.

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, overall weight: 47,000 kg, power: 522.2 kW (709.99 HP), fuel type: diesel, color: red, number of blades: 10, motor manufacturer: CAT, motor model: CAT C18, Rollers with 10/10 discs, each with 8 blades Crushing bar with comb Chain shoes Permanent overband magnet Water spray system Nwodpsy Uh N Aefx Acfoh Radio remote control

Condition: used, Year of construction: 2006, operating hours: 4,450 h, functionality: fully functional, overall weight: 19,000 kg, power: 257.42 kW (349.99 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C9, Field of application: waste wood and fresh wood, household and bulky waste, electronic scrap Shafts with 7/7 discs, 5 knives per disc Breaking bar with comb Robust hooklift frame Axle unit with drawbar Nwodpfxsy Akb Rs Acfeh Permanent over-belt magnet Radio remote control

Condition: excellent (used), max. workpiece diameter 300 mm hobbing length 1000 mm clamping length 2400 mm spindle head ISO 40 Nwedjyyqufjpfx Acfsh distance work spindle /surface of the table 180 - 330 mm surface area 2410 x 375 mm longitudinal feed 1000 mm vertical movement of the milling spindle 150 mm turning speeds 45 - 500 U/min weight of the machine ca. 5,6 t dimensions of the machine ca. 3,0 x 1,6 x 1,9 m

Condition: excellent (used), CATALOGUE NUMBER 7958 TECHNICAL DATA - Maximum cutting height: 120mm - Shaft width: 510mm - Shaft diameter: 75mm - Maximum sawblade diameter: 400mm – From above: - 2 rows of anti-kickback fingers - toothed feed roller - toothed outfeed roller – From below: - anti-kickback fingers - 2 toothed feed rollers - arbor with sawblade - toothed outfeed roller - 6 feed speeds Nsdey Ux Uijpfx Acfewh - Hydraulic motor (for extension, feed, rollers): 3kW - Main motor: 22kW - Infinitely variable feed speed - Control stand dimensions: 700x600x1000mm - Overall dimensions (L/W/H): 2300x1450x1600mm - Weight approx. 2650kg ADVANTAGES – Turkish production – Robust construction – Used machine, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2026, Technical Specifications: Mechanism dimensions: 800 x 640 mm Machine drive: 2 x 7.5kW electric motor Transmission: Helical gear Number of shafts: 2 pcs. Knife diameter with Shaft: Knives 310 mm Number of Knives: 40 pcs. Knife thickness: 10 mm Control: SIEMENS PLC Weight: approx. 1800 kg Main features: - A solid and reliable solution, - Custom design tailored to the needs of an individual customer, Nwsdpfx Aceittpuefeh - High resistance to heavy loads and intensive operation - Designed to shredding PP, PA6, PE plastics, pieces of soft wood, hard drives, aluminum, spiro pipes,cartoon pipes. - Uniquely designed knife shape Number and height of teeth depending on the material to be shredded. - Knives made of special materials dedicated to cold cutting and grinding - Knives made of Hardox 450 steel. - Advanced proprietary Siemens PLC control system that prevents machine blockage and significantly increases shredding efficiency - Low speed 35 rpm with high torque - Helical-bevel gear with appropriately selected power and speed - 12-month warranty. - Service in POLAND

Condition: used, mileage: 714,112 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ... Nsdpfey T Uuiox Acfswh

Condition: used, mileage: 736,739 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 Nwodoy T Uucepfx Acfsh - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ...

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Nwjdpfx Acoy T Hbbofoh

Condition: good (used), Year of construction: 2018, overall weight: 10,000 kg, power: 90 kW (122.37 HP), Single-shaft shredder Amis/Weimar WT15 with discharge belt and overbelt magnet Nwsdpfx Ajvgqrxjcfoh

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, overall weight: 25,000 kg, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 Nedpjyxkwqefx Acfewh - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE - Weight: 25,000 kg - Remote control - Humidification system - Rear conveyor 5.5 m - Overband magnet - Hydraulic drive (self-propelled) - Central lubrication Machine is overhauled and immediately available.

Condition: new, Four-shaft shredder in very good condition with only 1200 operating hours. Year of manufacture: 1998 Njdjy T Hbuopfx Acfjwh 2 x 7.5 kW motors.

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Njdpsxg Hansfx Acfewh Maximum saw blade diameter: 330 mm Pneumatic material clamps 3 operating modes

Condition: used, Year of construction: 1999, operating hours: 1,200 h, filling opening width: 1,000 mm, filling opening length: 1,250 mm, No. 04531 Four-shaft shredder WEIMA ZM 30 Used, year of construction 1999, approx. 1200 operating hours, machine in very good condition The four-shaft shredder is designed for bulky and very long wood waste, such as boards, pallets, packaging materials and cardboard of all kinds. Various plastics can also be shredded with this machine. The wood chips produced can be used directly for heating. Special secondary crushers excessively long chips. Hopper opening 1250 x 1000 mm LW Cutting unit width 462 mm Cutting unit length 562 mm Cutting disc diameter 235 mm Speed approx. 25 rpm 2 motors, each 7.5 kW Throughput capacity between 350 - 1250 kilograms per hour (depending on material and screen hole diameter) Screen hole diameter 20 mm Fuse protection 50 / 63 A Extraction connection diameter 200 mm GS-tested, CE-compliant The cutting tools can be sharpened using an angle grinder and round grinder (see operating manual). The entire cutting unit can be replaced. Incl. technical documentation Incl. electrical connection cable with plug Transport dimensions approx. 1450 x 1250 x 2150 mm LWH Weight approx. 1300 kg To avoid any misunderstandings, an on-site inspection by prior appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Nodpjy Tpg Tofx Acfewh Payment terms: Prices plus VAT, payment before collection or dispatch Delivery terms: Ex warehouse

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Nwjdpfsxbyx Tox Acfeh Full load current: 32 amp Main fuse: 35 amp

Condition: new, Year of construction: 2025, Screens for four-shaft shredders Models: RS, ZM, ZMK, GZ Nsdpfxjxn Namj Acfjwh Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Year: 2025 New / Ready for Operation We are a manufacturer of replacement blades and spare parts for crushers and shredders. Please provide the manufacturer's name and machine type when inquiring.

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm maximum diameter of the cut shaft 350mm Nwodowmg Saepfx Acfjh shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: black, operation weight: 500 kg, maximum load weight: 800 kg, lifting height: 3,800 mm, axle configuration: 2 axles, Year of construction: 2024, machine/vehicle number: WD1-800, WD1-800 Twin Shaft Mixer with Unloading – Leg Height 3800 mm Remote Control --- Technical Data: Model: WD1-800 Twin Shaft Mixer Batch Volume: 500 L Capacity: 800 L Efficiency: 25 m³/h Aggregate Size: 60–80 mm Paw Rotation Speed: 26 rpm Number of Mixing Paddles: 2 × 7 Mixing Motor Power: 18.5 kW Winch Motor Power: 5.5 kW Nwjdpfxov H D S Ej Acfsh Water Pump Power: 1.1 kW Basket Lifting Speed: 18 m/min Unloading Height: 3800 mm Dimensions: 4900 × 2900 × 4200 mm --- Equipment: Mixer reducer Mixing motor Winch reducer Winch motor Lubricating system - oil pump Water pump Internal coating Pneumatic discharge Frame Supporting structure - steel legs Unloading basket Platform Lifting track Handrail Ladder