Used Scm Fs 410 for sale (3,879)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. working width: 1100mm - Max. working height: 170mm - 2 units: - Rubber pressure roller 1) Grooved metal calibration roller - Rubber pressure roller 2) Grooved rubber roller + sanding pad + metal roller - Rubber pressure roller - Motor power of unit I and II: 11kW - From below: - 3 metal sliding rollers - Conveyor belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Operating pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg Ncsdpfx Asx S Eb Rjkyjr ADVANTAGES – Not repainted – Italian manufacture – 2 operating units – DTR documentation – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may change with higher exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm - Table width with extension: 750mm Ncsdpjy Drhhofx Akysr - Table length: 1530mm - Top: - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Net price: 39,900 PLN Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary subject to higher exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm Nodpfxey Ddp Dj Akyecr - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,428 h, load capacity: 6,000 kg, lifting height: 4,100 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 8.25 R15, rear tire type: superelastic tires (black), rear tire size: 315/70 R15, overall weight: 15,500 kg, empty load weight: 9,500 kg, total height: 3,200 mm, total length: 4,700 mm, total width: 2,300 mm, color: yellow, motor model: TCD 3.6 L4, Equipment: CE marking, cabin, lighting, pallet forks, sideshift, 🔍 Looking for a reliable forklift? We are industry specialists! 💼 We specialize in the sale of high-quality forklifts, offering verified machines in excellent condition. ✅ Explore our inventory and find the ideal solution for your business! 🚜 Highlighted in this listing: COMBILIFT C6000FSL – DUPLEX 4100mm – Year 2019 – 4428 HOURS – DIESEL – FREE LIFT – FORK POSITIONER – SIDELOADER – 1400MM FORKS – CONDITION: 5/5 ⭐ This forklift is in excellent technical condition and ready for immediate deployment. 🔧 🔧 Key Features and Technical Specifications: Model: COMBILIFT C6000FSL Year of manufacture: 06/2019 📅 Lifting capacity: 6,000 kg ⚖️ Operating hours: 4,428 h ⏱️ Mast type: Duplex Lift height: 4,100 mm 📦 Power: Diesel ⛽ Load center: 600 mm Total weight: 9,500 kg 🛞 Tyres: Solid, superelastic tyres in good condition Front tyres: Superelastic – 8.25 R15 – ✅ 100% TREAD Rear tyre: Superelastic – 315/70 R15 – ✅ 100% TREAD 📐 Dimensions: Overall height (mast lowered): 2,950 mm Fork length: 1,400 mm Free lift: 1,900 mm Total height (mast extended): 3,200 mm Overall length: 4,700 mm Overall width: 2,300 mm Positioner width: 1,320 mm ⚙️ Equipment: 💡 Lighting system 🎯 Adjustable boom 🥄 Pallet forks 🎚️ Fork positioner 🛠️ Operator cabin 📏 Side platforms – 1,400 mm Nsdpfxoy Erh Do Akyjcr 💡 Perfect for industries requiring efficient handling of long loads in confined spaces – ideal for timber, steel, or pipe sectors. 🧩 Additional Features: 🔄 Integrated multi-directional steering system 👨‍✈️ Ergonomic operator’s cabin 🏋️‍♂️ High reliability during intensive operation 🏭 Suitable for both outdoor and indoor warehouse applications 📦 Condition: Fully operational, regularly maintained, and immediately available for work. 🚚 We offer Europe-wide transport and provide a FREE initial inspection! 🎁

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Ncjdpey Dta Sefx Akyjr

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Ncsdox Twdyopfx Akyor

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Njdpfsx Twcvox Akyjcr

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · Travel distance X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm The basic frame structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, making it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the secret to permanent precision and stability. The layout of the machine allows the operator an optimal workflow while requiring minimal floor space. The resulting frame provides a balanced and secure base for the machining unit with outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on prismatically ground guides via recirculating ball carriages. The machining unit, in turn, is mounted to the mobile carrier using prismatic, ground rails and recirculating ball carriages. Description of aggregates and accessories (basic configuration) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill mount: M10 with 11 mm fitting Grooving saw unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Includes: 4 tool holders (right), without collets R8L Tool changer Automatic tool changing system for 8 tools. Moves along with the rear aggregate carrier for quick tool access. · Number of tool slots: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total tool weight: 22 kg · Adapter for 1 angle gearbox · Travels in X direction Ncedjx Twccjpfx Akyer Horizontal milling unit (position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collet 3–20 mm (ER 32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / 50 mm bore) · Motor power: 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Worktable The worktable is designed to provide the operator with maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of the workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · The retractable reference stops are CNC-controlled · Pendulum operation standard (2 working fields) --- other clamping systems optional --- Axis movement The drive system for X, Y, and Z axes uses ground recirculating ball screws of the highest precision class. The recirculating ball drive...

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm Ncedpoy Emf Rjfx Akyor 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: excellent (used), Planing width: 520 mm Min./Max. working height: 3 – 240 mm Motor power: 5.5 kW, 400 V, 50 Hz Cutterhead speed: 4,500 rpm Cutterhead diameter: 120 mm Number of planing knives: 4 Thicknessing table dimensions: 520 x 850 mm Feed speed: 6.5 / 10 / 13 / 17 m/min Extraction connection diameter: 150 mm Features: - Electric height adjustment - Handwheel for fine adjustment of thicknessing table height - Spiral infeed roller - Segmented pressure beam - Under-table roller - Undervoltage release - Emergency stop switch - Knife setting gauge NEW drive belts NEW ball bearings NEW planing knives Dimensions (L x W x H): approx. 1,120 x 990 x 1,000 mm Weight: approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • The prices stated are ex-location, loaded free of charge. • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any guarantee or warranty claims. Buyers are welcome to inspect the machine at our premises. • Special agreements are only valid in written form. Nsdpfxey Egmuo Akyscr (We answer inquiries only when you provide your address and phone number!)

Condition: excellent (used), Year of manufacture: 2015 Ncodey Ef Uqspfx Akysr Touchscreen control with color display Additional glue pot Anti-adhesion fluid Pre-milling unit Corner rounding on 2 units Flat and radius scraper Activation of units from the control panel Polishing units Weight: 1625 kg

Condition: used, Used machine Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3,500 - 7,000 rpm - With fixed spindle - Motor: 2.5–3.1 HP - Table: 830 x 700 mm - Slotting cutters up to 340 mm - With metal-jaw milling fence (Note: The Aigner parallel fence shown in the photos is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Nedpfx Ajy Dkgpekyscr Availability: short-term Location: Röllbach

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,845 h, load capacity: 5,000 kg, lifting height: 4,100 mm, free lift: 1,800 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 8.25-15, rear tire type: cushion tires (black), rear tire size: 8.25-15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,700 mm, total width: 2,050 mm, color: yellow, Equipment: CE marking, cabin, lighting, pallet forks, sideshift, SIDELOADER FORKLIFT – COMBILIFT C5000FSL – 2016 | 4,845 HOURS | DIESEL | DUPLEX 4,100 mm Ready to work from day one – no investment, no risk Why choose this unit? Looking for a machine that won’t disrupt your operations? This COMBILIFT C5000FSL is a proven machine delivered after a complete service – just get in and start working. No hidden costs. ✔ Fully serviced (oils, filters, thorough inspection of all components) ✔ Technical and visual condition: like new ✔ Only 4,845 operating hours – truly low use ✔ New tires – no additional investment required Key specifications: Capacity: 5,000 kg Drive: Diesel Mast: Duplex – 4,100 mm Fork positioner: 1,320 mm Fork length: 1,200 mm Cabin: full / heated Platform: 1,200 mm Full technical specification Basic data: Year of manufacture: 2016 Operating hours: 4,845 Capacity: 5,000 kg Load center: 600 mm Truck weight: 9,500 kg Mast and lifting: Mast type: Duplex Lift height: 4,100 mm Forks and attachments: Fork positioner: 1,320 mm Forks: 1,200 mm Dimensions: Height: 2,650 mm Length: 4,700 mm Width: 2,050 mm Overall height: 2,950 mm Chassis: Tires: Superelastic (100%) – new Front: 8.25 – 15 Rear: 8.25 – 15 Equipment: Nedpfx Akoy D Uwljyjcr Full heated cabin Fork positioner Joystick control Truck leveling system Condition: Technical: 5/5 – fully serviced Visual: refurbished, like new, no corrosion Ideal for: ✔ Warehouses with narrow aisles ✔ Timber, steel, and pipe industries ✔ Handling long loads ✔ Indoor and outdoor operations What you are buying You are not buying a “used forklift.” You are buying a thoroughly inspected, work-ready machine: ✔ Each unit undergoes a complete inspection before sale ✔ Ready for immediate use ✔ Live online demonstration available ✔ Delivery to your site possible Delivery and support ✔ Transport throughout Europe ✔ Comprehensive logistics solutions ✔ Leasing / financing assistance ✔ After-sales support Why FT LOGISTICS? We deliver forklifts that work – not ones that sit in the workshop. ✔ Over 100 machines in stock ✔ In-house service and preparation ✔ Experience across Europe ✔ Hundreds of satisfied customers Contact us today FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,845 h, load capacity: 5,000 kg, lifting height: 4,100 mm, free lift: 1,800 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 8.25-15, rear tire type: cushion tires (black), rear tire size: 8.25-15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,700 mm, total width: 2,050 mm, color: yellow, Equipment: CE marking, cabin, lighting, pallet forks, sideshift, SIDELOADER FORKLIFT – COMBILIFT C5000FSL – 2016 | 4,845 HOURS | DIESEL | DUPLEX MAST 4,100 mm Ready to work from day one – zero investment, zero risk Why choose this machine? Looking for equipment that won’t halt your operations? This COMBILIFT C5000FSL is a proven unit, fully serviced – just get in and start working. No hidden costs. ✔ Fully serviced: oils, filters, comprehensive inspection of all components ✔ Condition: technical and visual – like new ✔ Only 4,845 operating hours – genuinely low usage ✔ New tires – no further investment necessary Key Specifications Capacity: 5,000 kg Drive: Diesel Mast: Duplex – 4,100 mm Fork positioner: 1,320 mm Fork length: 1,200 mm Cabin: full, heated Platform: 1,200 mm Full Technical Specification Basic Data: Year: 2016 Operating hours: 4,845 Capacity: 5,000 kg Load center: 600 mm Machine weight: 9,500 kg Mast and Lifting: Mast type: Duplex Lift height: 4,100 mm Forks and Attachments: Fork positioner: 1,320 mm Forks: 1,200 mm Dimensions: Height: 2,650 mm Length: 4,700 mm Width: 2,050 mm Overall height: 2,950 mm Chassis: Tires: Superelastic (100%) – new Front: 8.25 – 15 Rear: 8.25 – 15 Equipment: - Full heated cabin - Fork positioner - Joystick control - Chassis self-leveling system Condition: Technical: 5/5 – fully serviced Visual: refurbished to like-new condition, no corrosion Ideal for: ✔ Warehouses with narrow aisles ✔ Timber, steel, and pipe industries ✔ Handling long loads ✔ Indoor and outdoor applications What you’re actually buying: This is not a typical “used forklift.” You are acquiring a machine that is fully inspected and ready for work: ✔ Every machine is thoroughly tested before sale Ncedoy D Uwfepfx Akyer ✔ Ready for immediate use ✔ Live online demonstration available ✔ Delivery to your location available Delivery and Support ✔ Transport available across Europe ✔ Full logistics assistance ✔ Help with leasing/financing ✔ After-sales support Why FT LOGISTICS? We deliver forklifts that perform – not ones that require service. ✔ Over 100 units in stock ✔ In-house service and preparation ✔ Experience across Europe ✔ Hundreds of satisfied clients Contact us today FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,845 h, load capacity: 5,000 kg, lifting height: 4,100 mm, free lift: 1,800 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 8.25-15, rear tire type: cushion tires (black), rear tire size: 8.25-15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,700 mm, total width: 2,050 mm, color: yellow, Equipment: CE marking, cabin, lighting, pallet forks, sideshift, SIDELOADER FORKLIFT – COMBILIFT C5000FSL – 2016 | 4,845 HOURS | DIESEL | DUPLEX 4,100 mm Ready to work from day one – no investment, no risk Why choose this unit? Ncedpfey D Uv Ujx Akysr Looking for a machine that won’t disrupt your operations? This COMBILIFT C5000FSL is a proven machine delivered after a complete service – just get in and start working. No hidden costs. ✔ Fully serviced (oils, filters, thorough inspection of all components) ✔ Technical and visual condition: like new ✔ Only 4,845 operating hours – truly low use ✔ New tires – no additional investment required Key specifications: Capacity: 5,000 kg Drive: Diesel Mast: Duplex – 4,100 mm Fork positioner: 1,320 mm Fork length: 1,200 mm Cabin: full / heated Platform: 1,200 mm Full technical specification Basic data: Year of manufacture: 2016 Operating hours: 4,845 Capacity: 5,000 kg Load center: 600 mm Truck weight: 9,500 kg Mast and lifting: Mast type: Duplex Lift height: 4,100 mm Forks and attachments: Fork positioner: 1,320 mm Forks: 1,200 mm Dimensions: Height: 2,650 mm Length: 4,700 mm Width: 2,050 mm Overall height: 2,950 mm Chassis: Tires: Superelastic (100%) – new Front: 8.25 – 15 Rear: 8.25 – 15 Equipment: Full heated cabin Fork positioner Joystick control Truck leveling system Condition: Technical: 5/5 – fully serviced Visual: refurbished, like new, no corrosion Ideal for: ✔ Warehouses with narrow aisles ✔ Timber, steel, and pipe industries ✔ Handling long loads ✔ Indoor and outdoor operations What you are buying You are not buying a “used forklift.” You are buying a thoroughly inspected, work-ready machine: ✔ Each unit undergoes a complete inspection before sale ✔ Ready for immediate use ✔ Live online demonstration available ✔ Delivery to your site possible Delivery and support ✔ Transport throughout Europe ✔ Comprehensive logistics solutions ✔ Leasing / financing assistance ✔ After-sales support Why FT LOGISTICS? We deliver forklifts that work – not ones that sit in the workshop. ✔ Over 100 machines in stock ✔ In-house service and preparation ✔ Experience across Europe ✔ Hundreds of satisfied customers Contact us today FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES Ncsden Dw N Dopfx Akyer instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50 OTHER Surface Planer machines available as in photos

Condition: used, machine/vehicle number: 008439, X axis working area: 3100 mm Y axis working area: 1300 mm Working Table: Pod and Rail Nodpfx Aksyngzcsyscr Main Electrospindle power: 8.5 KW Number of controlled axes: 4 axes Total number of tool changer positions: 18

Condition: excellent (used), Year of construction: 2014, TECHNICAL DATA: Working width 230 mm, working height 120 mm, five heads, spiral-knife cutterheads, head arrangement: bottom/right/left/top/bottom, infeed table length 2500 mm, electric height adjustment, stepless feed speed control, pneumatic material pressure, motor with integrated brake, cutterhead speed 6000 rpm, total weight 2000 kg, motor power ratings: 5.5 kW/7.5 kW/7.5 kW/4 kW, year of manufacture unknown. Nodpfxoy D Sfys Akyecr

Condition: used, machine/vehicle number: 007966, Position 1: Panel Feeding and Loading SCM-EVOLUTION C Position 2: Double Sided Squaring/Edgebanding Machines SCM-EVOLUTION C Position 3: Panel Stacking and Offloading SCM-EVOLUTION C Nsdowu Agpjpfx Akyocr

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 118 mm, cutting width (max.): 1,270 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,550 mm, total width: 2,200 mm, total height: 1,600 mm, overall weight: 630 kg, Equipment: CE marking, documentation/manual, saw blade guard, – Italian manufacture – Year of production: 2006 – Operating manual and CE certificate Ncsdpey Ax Nijfx Akyjr TECHNICAL SPECIFICATIONS: – Carriage length: 3200 mm – Cutting width on the right side: 1270 mm – Blade diameter: min. 250 mm, max. 350 mm – Scorer blade diameter: 120 mm – Main motor: 5.5 kW – Scorer motor: 0.55 kW – Brake – Main blade spindle diameter: 30 mm – Scorer spindle diameter: 20 mm – Cutting height adjustment – Cutting angle adjustment: 0° - 45° – Max. cutting height at 90° (350 mm blade): ~118 mm – Max. cutting height at 45° (350 mm blade): ~84 mm – Two ratchets – Moving guard – Carriage dimensions (length/width): 3200 x 315 mm – Extraction port diameter: 80 and 120 mm – Overall dimensions (L/W/H): 355 / 220 / 170 cm – Weight: ~630 kg

Condition: good (used), Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min Nedpfxoy A Svpj Akyecr N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials Ncedpfx Akoylp S Esyer The machine is fully operational and ready for use. Viewing possible anytime by appointment. Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Unit / Spindle: Main spindle: approx. 7.5 kW Speed: up to 18,000 rpm Ncsdpfx Akjyl Numsyjr Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Panel processing Single-item and series production Condition: Machine was in use until recently Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region

Condition: good (used), Code: 0098 Brand: MINIMAX SCM Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Njdpfsy Au Diex Akyecr Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Weight kg 485

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements... Ncedpfx Aksytrgzoysr