Used Sigma Aldrich 2Mag Mix 1 Magnetic Stirrer for sale (80,926)

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = EUROMIX MTP 10 cbm mixing semi-trailer - New - 2-axle - SAF axles - 1x lift axle - air suspension ABS - Tires 385/65 R22.5 - Gross vehicle weight approx. 36,000 kg - Tare weight approx. 7,640 kg - Separate motor EUROMIX MTP - Mobile mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10 m³ ready-mix concrete Lightweight mixing drum Lightweight mixing drum made of HARDOX S450 material Lightweight mixing spirals made of HARDOX S500 material Gearbox manufacturer: ZF P5300 Hydraulic pump manufacturer: Bosch Rexroth Hydraulic motor manufacturer: Bosch Rexroth Oil cooler system integrated Mixing control: mechanical, start/stop: electric Compressed air water system Water connection at the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with one service flap Access ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swiveling chute Drum locking for securing the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mudguard made of steel above the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500 l (compressed air) Water tank made of steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrical system Mixer operation – mechanical at the rear Start-stop system (with EDC) Geometric volume 17361 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Special equipment: Extension chute plastic - steel - aluminum Folding chute plastic (or steel) Retaining flap swiveling chute Plastic box Dust box stainless steel Additive container non-pressurized Additive pressure container Trowel holder ¾ drum closure Lhodpfoym Tacex Aiqsl Rear view camera LED work light EuromixMTP Intelligent drum control (electronic mobile mixer control) Step on the underrun protection with handrail Water meter Pressure gauge Frame cover Fire extinguisher Holder for self-compacting concrete hose (5 m long) Transition piece to the self-compacting concrete hose (reducing chute) Hydraulic chute support For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further information = Year of construction: 2026 Usable material: Concrete GVWR: 38,000 kg Body brand: EuromixMTP EM 10 L APK (Technical inspection): New TÜV upon delivery Please contact Harun Cevik, Jamila Azzi, Henri Omeragic or Denis Omeragic for further information.

Condition: new, axle configuration: 3 axles, color: white, Year of construction: 2026, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = EUROMIX MTP 12 cbm mixing semi-trailer EUROMIX MTP - Mobile mixer unit EM 12 R - Standard Model: EM 12 R Nominal volume 12 m³ ready-mix concrete Mixing drum in standard design Mixing drum in standard design made of S355 material Mixing blades in standard design made of S420 MC material Gearbox manufacturer: ZF P5300 Hydraulic pump: Bosch Rexroth Hydraulic motor: Bosch Rexroth Oil cooler system integrated Mixing control: mechanical, start/stop electrical Compressed air water system Water connection on the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with one service hatch Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swiveling chute Ledjym Sy Uepfx Aiqjhl Drum locking to secure the drum during maintenance Polyurethane primer Weight approx. 4,725 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mud flaps made of steel over the rear axles 2 x extension chutes made of steel or plastic Water system Water tank 650 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection: "C" coupling Operation & Electrical System Mixer operation – mechanical, rear Start-stop system (with EDC) Geometric volume 19420 L Volume water tank 12787 L Tank inclination 10.5 Length 7545 mm Width 2300 mm Height 2765 mm Engine: FTP 55 kW Mounted on Euromix MTP 3-axle semi-trailer Vehicle type: Euromix MTP KIS 24 3-axle mobile mixer chassis Axles with short steering ratio (310/340) for ready-mix concrete operation 1 included Axle 9 tons SAF 22.5" disc brake, single tire for air suspension 3 included Axle track width: 2040 mm (standard dimension) 3 included Axle distance approx. 1400 mm / 1400 mm 1 included EBS braking system Tires 385/65 R 22.5 Plastic mudguards, 180 degrees, above each axle (for 3 axles) 1 included Chassis paint in RAL 9005 deep black 1 included KTL with zinc phosphating plus powder coating, maximum corrosion protection (only with 1 included powder coating available) Tire pressure monitoring system basic version, connected to the CAN-bus system of the EBS 1 included 24 ton telescopic support leg with single-sided operation and 1 included Semi-round with base plate Axle loads: 24,000 kg (3 x 8000 kg, technically: 3 x 9000 kg) 1 included Chassis length approx. 8570 mm 1 included For further questions, our team is available in the following languages. We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further information = Year of construction: 2026 Usable material: Concrete GVWR: 44,000 kg Brand of the superstructure: Euromix MTP EM 12 R Please contact Harun Cevik, Jamila Azzi, Henri Omeragic or Denis Omeragic for further information.

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, = Additional Options and Accessories = - Air suspension = Notes = EUROMIX MTP 10 cbm mixing semi-trailer (Rental possible) Empty weight approx. 6400 kg (trailer only) - New - 2-axle - 10-ton SAF axles - 1x lift axle - air suspension, ABS - Tires 385/65 R22.5 - Technical total weight 38,000 kg EUROMIX MTP - Mobile mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10 m³ ready-mix concrete Mixing drum in lightweight design Mixing drum in lightweight version made of HARDOX S450 material Mixing spirals in lightweight version made of HARDOX S500 material Gearbox manufacturer ZF P5300 Hydraulic pump manufacturer Bosch Rexroth Ledpjym Szfofx Aiqehl Hydraulic motor manufacturer Bosch Rexroth Oil cooling system integrated Mixing control mechanical, start/stop electrical Compressed air water system Water connection on the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with a service hatch Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge pan, and swiveling chute Drum locking to secure the drum during maintenance Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mud flaps made of steel above the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrical Mixer operation – mechanical at the rear Start-stop system (with EDC) Geometric volume 17361 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Special equipment: Extension chute plastic - steel - aluminum Folding chute plastic (or steel) Retaining flap swiveling chute Plastic box Dust box stainless steel Additive tank non-pressurized Additive pressure tank Trowel holder ¾ drum closure Rear view camera LED work light EuromixMTP Intelligent drum control (Electronic mobile mixer control) Step on the underrun protection with grab handle Water meter Pressure gauge Frame cover Fire extinguisher Holder for self-compacting concrete pipe (5 m long) Transition piece for self-compacting concrete pipe (reducing chute) Hydraulic chute support For further questions, our team is available in the following languages. We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Additional Information = Year of construction: 2026 Usable material: Concrete GVW: 38,000 kg Make of the body: EuromixMTP EM 10 L Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for further information.

Condition: used, Crane magnet, lifting magnet BAKKER MAGNETICS Type: BM 400 Year of manufacture: 1998 Load capacity: 400 kg Magnet surface size: 190 x 155 mm Ledpfx Aoxciwhsiqohl Own weight: 36 kg With manual switching lever Crane ring eye for attachment Load capacity 400 kg at 0.0 mm distance to the material and minimum material thickness of 30 mm.

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Walkable fenders - Tailgate ramp - Low loading platform Net: €5,168.07 / Gross: €6,150.00 Article number: VTS335481800.01 Technical data: • Brand: Vlemmix • Model: VTS • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 480 x 180 x 34 cm • External dimensions (LxWxH): 662 x 240 x 167 cm • Loading height of the floor: 35 cm • Permissible total weight: 3,500 kg Lodpfx Aiszy Aqvjqehl • Unladen weight: 930 kg • Payload: 2,570 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: No DESCRIPTION • Continuous steel fenders, walkable • Very stable steel frame, welded • Water-resistant glued 18mm thick screen-printed floor • Loading platform height only approx. 35cm • Maintenance-free rubber spring axles from KNOTT • KNOTT drawbar coupling and parking brake • Reverse assist • Very low chassis for low approach angle • V-drawbar with support for the excavator bucket • Excavator bucket holder with lashing eyes • Stable steel side panels approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal beam chassis for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Stable rear support integrated into the loading ramp (automatic support when the ramp is opened) • 12 lashing eyes on the side, with ring eyes • Lighting recessed in the rear frame • Outline lights at the front • Automatic support wheel with holder in the middle • 13-pole plug • Reversing light • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Walkable fenders - Loading ramp - Low loading platform Net price: €3,268.91 / Gross price: €3,890.00 Article number: VTA227301500.01 Technical data: • Brand: Vlemmix • Model: VTA • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/HU (German technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 34 cm • External dimensions (LxWxH): 469 x 210 x 167 cm • Loading height of the floor: 35 cm • Permissible total weight: 2,700 kg • Unladen weight: 570 kg • Payload: 2,130 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: No DESCRIPTION • Continuous steel fenders, walkable • Very stable, welded steel frame • Water-resistant, glued 18mm thick screen-printed floor • Loading platform height only approx. 35cm • Maintenance-free rubber spring axles from KNOTT • KNOTT inertia braking system and parking brake • Reverse automatic • Very low chassis for a low loading angle • V-drawbar with support for the excavator bucket • Excavator bucket rest with lashing points • Sturdy steel side panels approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal beam chassis for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Sturdy rear support integrated into the loading ramp (automatic support when the ramp is open) • 8 lashing points on the sides, with ring eyes • Lighting recessed in the rear frame • Outline lights at the front • Automatic support wheel with holder in the middle Ledpfxjzy Aqio Aiqjhl • 13-pole plug • Reversing light • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), Year of construction: 1995, operating hours: 43,499 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of construction: 1995; Delivery year: 1998 Installation & Commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer Specifications / History Previous owner (1999–2022): German aerospace group Technical Specifications Travel Distances & Working Area X-axis (longitudinal table travel): 4,000 mm Y-axis (cross-slide traverse): 2,500 mm Z-axis (vertical ram travel): 1,000 mm Clearance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) Lhsdpfox Hxdzex Aiqsl B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverses X/Y/Z: Feed 0–6,000 mm/min, rapid traverse 15,000 mm/min B-axis nutator: 0–3,600 deg/min C-axis nutator: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing control: max. 4,000 Nm Speed range Stage I: 20–875 rpm Stage II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool diameter: 315 mm Tool diameter at full occupancy: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Distances Vertical spindle unit: Spindle nose – table surface 250–1,250 mm Horizontal spindle unit: Spindle center – table surface 150–1,150 mm Nutator (MC303): Spindle center – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Special Features & Accessories Fully automatic tool changer (ATC): 120 stations (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Toolbox + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with carriage: 3,500 x 2,300 x H 2,670 mm Tool changer without carriage: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Carriage with RAM: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool case: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis portal milling machine is ideally suited for machining steel, cast iron and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 stations), fully automatic head changer, and high-precision B/C axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Condition: used, X: 4000 MM Y: 2500 MM Z: 1000 MM DISTANCE BETWEEN UPRIGHTS: 2000 MM TABLE 1: 3000 X 1500 MM - CAPACITY: 12 TONS TABLE 2: 3000 X 1500 MM - CAPACITY: 12 TONS SPINDLE SPEED: 20 - 4000 RPM HEAD CHANGER: YES. COMPLETE WITH UNIVERSAL AUTOMATIC HEAD - ORTHOGONAL HEAD WITH C-AXIS - VERTICAL HEAD TOOL CHANGER: 120 POSITIONS CNC: FIDIA Lsdpfxjzzqufe Aiqjhl

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Lsdozl Td Rjpfx Aiqjhl Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m The machine is equipped with angle milling heads for large engine machining. Lsdszwg Nkepfx Aiqohl + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and misc.tools the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Year of construction: 2023, condition: new, SEMIX M160S4 provides the highest capacity amongst mobile concrete batching plant in the world. SEMIX Mobile 160S4 equipped with 6000/4000 capacity twin shaft concrete mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Lsdpfx Aijgazcteqehl All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2016, condition: used, overall weight: 300,000 kg, total length: 16,000 mm, total width: 9,000 mm, total height: 8,000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling Machine Machine: 17-10 FP 300 NC / 5 m Serial Number: 2.8304.06 Original Year of Manufacture: 1983 In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction. The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17, ensuring versatile machining capabilities for demanding milling tasks. The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation. The system has been professionally dismantled and packed in containers. It is located at the Port of Hamburg and is immediately available and ready for worldwide shipment. Manufacturer: Waldrich Coburg Overhauled by Waldrich Coburg (2016) Siemens SINUMERIK 840D sl Universal Fork Milling Head USP 300 C 350 Additional Angle Milling Head WFU 500 SZ 400 F17 Workpiece weight up to 100 t Lodpfx Aijzc Sageqshl Full protective enclosure Extensive technical documentation available Dismantled and ready for loading Location: Port of Hamburg, Germany Immediately available Tool holder type: ISO 50 Travel X-axis: 5700 - mm Movement B-axis: 0 - 180 ° Dimensions (LxWxH) approx.: 16000 x 9000 x 8000 mm Passage between the uprights: 3,500 mm 5-axis machining: Yes Travel Y-axis: 3500 - mm Weight approx.: 300,000 kg Travel W-axis: 800 - mm Travel Z-axis: 2050 - mm Year of construction: 2,016 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: FOB Free On Board under power: No

Condition: new, functionality: fully functional, power: 205 kW (278.72 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH COMPACT-120 fully automatic concrete plant is a compact concrete production facility designed to offer high production capacity even in limited land conditions. Thanks to its reduced dimensions, it requires minimal space, yet delivers equivalent performance to stationary plants with a production capacity of 120 m³/h. This feature makes it an ideal solution, especially for urban projects, narrow construction sites, or projects requiring frequent relocation. The COMPACT-120 concrete plant can be manufactured with linear or square aggregate bunker options according to user needs. This allows for flexible use in both fixed and mobile plant concepts. Manufactured in compliance with CE standards, the plant offers significant cost advantages to businesses with its quick assembly, easy transportability, and low infrastructure requirements. Steel-legged cement silos eliminate the need for concrete foundations, while the aggregate feeding ramp can be conveniently prepared using a metal wall system. Lhodpfx Asxp U Ilsiqsl The 3 m³ capacity twin-shaft mixer used in the production line provides homogeneous mixing quality, while the plant's entire automation system is equipped with high-end components from SIEMENS and SCHNEIDER. The PLC-controlled system, with its advanced software interface, provides operators with ease of use and maximum control. COMPACT-120 Compact Concrete Plant Technical Specifications Production Capacity: 120 m³/h Weight: 55 tons Total Motor Power: 205 kW Electric Generator Requirement: 300 kVA Mixer Type: Twin-Shaft Mixer Working Area: 600 m² Aggregate Storage Bunker: 4 x 30 m³ Aggregate Weighing Bunker: 4.5 m³ Aggregate Weighing Belt: 1,000 x 11,100 mm Aggregate Transfer Bucket Volume: 6 m³ Mixer Wet Concrete Volume: 3 m³ Cement Weighing Bunker: 1,800 kg Water Weighing Bin: 1,000 liters Additive Weighing Bin: 100 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Capacity options between 100 and 500 tons Control Type: Fully Automatic Why Should You Choose the COMPACT-120 Concrete Plant? CONSTMACH COMPACT-120 combines high production capacity with a compact design to offer investors maximum efficiency. With its low operating costs, easy installation, and portability, it is the perfect solution for both short-term and long-term projects. This plant, with all components from world-class brands, is designed for long-lasting and uninterrupted production. Offered with the CONSTMACH guarantee, the COMPACT-120 combines quality, durability, and engineering excellence in a single structure. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Walkable fender - Ramp - Low loading platform Net price: €4,453.78 / Gross price: €5,300.00 Article number: VTM335401800.01 Technical data: • Brand: Vlemmix • Model: VTM • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 34 cm • External dimensions (L x W x H): 582 x 240 x 167 cm • Loading height of the floor: 35 cm • Permissible total weight: 3,500 kg • Unladen weight: 840 kg • Payload: 2,660 kg Lsdpfx Ajzupxpeiqohl • Chassis: Low-loader (wheels beside the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: No DESCRIPTION • Continuous steel fender, walkable • Very stable steel frame, welded • Water-resistant, glued 18mm thick screen-printed floor • Loading platform height only approx. 35cm • Maintenance-free rubber spring axles from KNOTT • KNOTT inertia braking system and parking brake • Reversing aid automatic • Very low chassis for a low loading angle • V-drawbar with support for the excavator bucket • Excavator bucket storage with lashing eyes • Sturdy steel side walls, approx. 34cm high • Galvanized chassis • Torsionally rigid longitudinal member chassis for safe driving characteristics • Solid loading ramp, approx. 132cm long, with gas spring support • Stable rear support integrated in the loading ramp (automatic support when the ramp is opened) • 10x lashing eyes on the side, with ring eyes • Lighting recessed in the rear frame • Marker lights in the front • Automatic support wheel with holder in the middle • 13-pin connector • Reversing lights • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: excellent (used), Year of construction: 1994, operating hours: 1,930 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total length: 15,000 mm, table length: 5,000 mm, total width: 15,000 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total height: 7,500 mm, table height: 1,350 mm, distance between stands: 3,500 mm, type of input current: AC, table load: 65,000 kg, workpiece weight (max.): 65,000 kg, distance table center to spindle nose: 2,300 mm, overall weight: 210,000 kg, spindle motor power: 50,000 W, MACHINE DATA Machine type: Portal milling machine - double column for continuous 5 axis operation Manufacturer: WALDRICH COBURG Model: 15 S - 10 FPF 300 NC Year of construction: 1994 Condition: Fully refurbished 2015 Functionality: fully functional Operating hours: 2,931 h TECHNICAL DETAILS Number of controlled axes: 5 travel distance X-axis: 7,200 mm travel distance Y-axis: 4,200 mm travel distance Z-axis: 1,750 mm spindle speed (max.): 4,000 rpm working width: 3,500 mm PROVISION Machine location: Ljubljana, Slovenia Availability: now Delivery conditions: FCA Pick up at location: Ljubljana Shipping costs: upon request Planer-milling machine - double column: completely overhauled in 2014 / 2015 by Waldrich Coburg (basically everything except the casting): > New control unit Lhsdpfx Ajvv N I Rsiqol > New cables > New motors > New electrics > Guideways overhauled DESCRIPTION - Heavy double-column machine for processing complex shapes - 2 pallet stations with 2 pallets (load capacity 65t each) - Machine with CNC control SIEMENS 840D sl - In 2014, conversion of the control system to SIEMENS 840D sl (incl. complete cabling and control cabinet) - in 2015 replacement of all axis motors - Various angle milling heads - NC-controlled milling head with 50 kW milling power / clamping 2.5° each with Hirth serration (type USP300C450F15S) - 2-axis NC-controlled fork head with 40 kW milling power (type UFN00SZ500) - Automatic tool changer for 76 tools (ISO 50 and 60) TECHNICAL DETAILS Travel X / Y / Z: 7,200 / 4,200 / 1,750 mm Milling width: 3,500 mm Distance spindle nose to table: 2,300 mm Milling power: 50 kW Speed: 10 - 4,000 rpm Front spindle diameter: 150 mm Spindle holder: ISO 60, ISO50 Control: Siemens 840D sl Pallet size: 3,000 x 5,000 mm Pallet load: max. 65 t Number of pallets: 2 pieces Tool changer: 76 slots Feed rate: 10 - 15,000 mm/min MACHINE DETAILS Pick-up power: 92 kW Weight: 210 t Spindle hours: 2,931 h Switch-on time: 10,870 h Bed dimensions: 12.5 x 2.3 x 0.78 m; 28.5 t Pallet dimensions: 5.35 x 3.0 x 0.4 m; 22 t Main pallet carrier dimensions: 5.1 x 2.9 x 0.5 m; 25 t Dimensions of bed section: 3.8 x 2.9 x 0.5 m; 10 t Milling spindle box dimensions: 4.1 x 1.9 x 1.5 m; 13.5 t Left/right column dimensions: 4.1 x 1.3 x 1.7 m; 10.5 t Exhaust air slide dimensions: 8.5 x 0.7 x 1.2 m; 1.1 t Control cabinet dimensions: 7.9 x 0.6 x 2.1 m; 2.8t THIS IS A TOP CLASS MACHINE FOR MOST ACCURATE WORK; HIGHLY EFFECTIVE. MACHINE IS ASSEMBLED AND UNDER POWER:

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 145,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 7570 mm Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 CNC biaxial continous milling head Right angle Milling Head with Auto Indexing Right Angle Head prolonged with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm Lhedsyl S Ngspfx Aiqsl

Condition: reconditioned (used), Diosna SP 160 AD Spiral Mixer with 2 bowls - 2 timers, 2 speeds - 160 kg dough capacity - after refurbishment - 2 acid-resistant stainless steel bowls - perfect condition - possibility of part exchange with another machine Lodpfxow Hm Ale Aiqehl

Condition: good (used), * Machine length: ~ 19600 mm * Machine width: ~ 6200 mm * Machine height: ~ 2500 mm * Max weight of roll: 50 T * Roll length: max 13000 mm * Roll diameter: max 2000 mm * Grinding spindle speed: 450 – 1800 rpm Ljdoud R Szopfx Aiqohl * Cutting speed: 10 – 45 m/s * Adjustment distance: ~ 13900 mm Machine delivered new in 1986, upgraded in 2014 including new Siemens controls.

Year of construction: 2009, condition: ready for operation (used), A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible. Lhodjy Nna Dopfx Aiqjl

Year of construction: 2002, condition: ready for operation (used), A double column cold mixing system Mixaco is available. Material: steel, usable volume: 800l, motor power: 30kW, mixing vessel: conical, mixing blades: dispersion blades, machine dimensions X/Y/Z: 2900mm/2850mm/3500mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. Lhodpfx Ajyxgqyoiqol

Year of construction: 2012, condition: used, Used Pharmix model HHR1200 stainless steel (AISI 316L) double cone jacketed vacuum dryer blender. Approximately 1200 litre total capacity. Internal rated -1/0 bar design pressure at 60°C. Has external stainless steel (AISI 304) jacket 260 litre capacity rated 3 bar design pressure at 70°C. Includes internal stainless steel vacuum pipe. Cone has intlet with bolted lid and bottom discharge with manual valve. Driven through gearbox by 2.2 kW, 400 V, 1420 rpm, 50 Hz el. motor, rotations of dryer are 2.2 rpm. Gearbox is Ex II 2D c 125°C rated / motor II2 D Ex tD A21 T 120°C. Mounted on mild steel support stands. Overall dimensions are 4015 mm (length) x 3975 mm (width) x 3300 mm (height - includes stairs), weight 3430 kg. Unit is dismantled - attached photos are from installation. Lodpjlc Dv Uofx Aiqjhl

Year of construction: 2001, condition: good (used), 2nd hand Mixaco Mischer CM 1000 for sale. The mixer was in use for the Powder Coating indutry and is ready for operation and in a good condition. Lhjdsfmh Uvspfx Aiqol Inerting of the mixer is possible! You cab inspect the Mixer in our warehouse in Arnsberg/ Germany

Year of construction: 1953, condition: ready for operation (used), Offered for sale is a WaldrichSiegen CNC portal milling machine for horizontal and vertical milling as well as drilling of large workpieces. Table travel: 14000mm, crossrail saddle travel: 4500mm, crossrail travel: 4000mm, quill travel: 450mm, positioning accuracy of table/crossrail saddle/crossrail/quill: 0.05mm, distance between columns: 4545mm, distance from table to spindle: 4000mm, table size/clamping surface X/Y: 14000mm/4350mm, main spindle motor power: 125kW, main spindle tool interface: ISO SK60, max. table load: 200t, max. point load: 10000kg, control: Siemens 840D, measuring systems: Heidenhain, axis drives: Siemens/Dornhoff. Including an angle-adjustable universal milling head, angle milling heads with installation heights of 800mm/850mm/1400mm, a 1400mm work spindle extension, adapter plates for the work spindle with 400mm/220mm and chip conveyors on the left/right below floor level. The saddle guideways require adjustment. The machine was built in 1953, conversion of the original planer into a portal milling machine by WaldrichSiegen with a completely new milling saddle: 1974, CNC upgrade with a new electrical system: 2001, conversion of the table drive to NC: 2015, conversion of the crossrail drive to a gantry configuration: 2024. Machine dimensions X/Y/Z: approx. 40000mm/10000mm/9000mm, weight: approx. 350t. Documentation available. Inspection possible by arrangement. Lsdpfjzrzphox Aiqjhl

Year of construction: 2013, condition: excellent (used), Complete line for aerating fat cream. Includes storage tank. Scraped heat exchanger, Mondotherm - Terlet D100. Mondomix aerator, VA-15L. Coolers. Lhodszpg Scjpfx Aiqol Pumps. Complete CIP system.

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery Lhsdpof Azwzefx Aiqol with Touch screen control, with product pump In good condition. with mondotherm