Used Sls Select for sale (3,635)

Condition: used, maximum load weight: 26,700 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 02/2013, * Schmitz Cargobull Gotha SKI 18 SL * Rear tipper (half-pipe) * 2-axle * VIN: WSK000001270258 Pgodpslhp Rzjfx Ag Dsk * Unladen weight: 5,800 kg * Payload: 26,700 kg * Gross weight: 32,500 kg * Kingpin load: 26,700 kg * Axle load: 9,000 / 9,000 kg * Trailer length: 8,775 mm * Trailer width: 2,550 mm * Trailer height: 3,280 mm * Tyres: 385 / 65 R 22.5 * Price on request * All information subject to change, errors excepted * Internal number: 0376 Tel./WhatsApp:

Condition: ready for operation (used), Year of construction: 2005, clamping force: 4,000 kN, overall weight: 22,500 kg, Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details. • Quantity available: 4 • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm • Minimum mould height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. moving platen weight: 4500 kg • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: • Screw diameter: 70 / 80 / 90 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s • Screw speed: 350 rpm • Screw peripheral speed: 65 / 75 / 80 m/min Pjdpfsy A Ny Ejx Ag Dsgk • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle stroke: 600 mm • Drive and power: • Hydraulic pump motor: 55 kW • Total installed power: 96.2 kW • Heating: • Cylinder heating capacity: 6 zones (5500 + 4300 W) • Nozzle heating: 1250 W • Oil tank capacity: 590 l

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,942 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🇬🇧 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 COMBILIFT C4000 – DUPLEX 4600mm – Year 2019 – 3942 h – LPG / GAS – SIDE SHIFT – CONDITION 5/5 ⭐ Experience | Own service & paint shop | Professional consulting | Own transport | After-sales support 🔍 Looking for a forklift you can trust? We are a reputable European dealer of new & used forklifts. From small companies to major industrial plants – our forklifts mean reliability, safety, and smooth logistics. 💎 WHY CHOOSE US ✅ Full technical inspection – service, testing, oil & filter replacement, component regeneration 🧾 Full UDT inspection available 🎨 Own paint & service workshop – refined look & performance 🚚 Europe-wide transport by our trained drivers 🎓 Operator training & machine test at delivery 🛠️ After-sales support – we stay with you after purchase 👀 Machine viewing & testing available 🤝 Financing with leading leasing companies Pgsdpfx Asy Ergyog Dok 💶 Invoice in EUR or PLN 🏷️ IN OFFER COMBILIFT C4000 – Four-way / Multi-directional forklift 📆 Year: 2019 | ⏱️ Hours: 3942 | ⚙️ Drive: LPG / Gas | 💪 Capacity: 4000 kg 🎯 Mast: Duplex 4600 mm | 🔧 Forks: 1200 mm | Positioner: 1150 mm 🛞 Tyres: Superelastic – 100% condition ✨ Condition: Excellent – after full service, rust-free, ready to work 📏 Free lift: 2250 mm Dimensions: Height 2400 mm | Length 2400 mm | Width 2250 mm | Positioner width 1150 mm | Structural height 3000 mm 🏗️ PERFECT FOR: 🏠 Narrow aisles | 🪵 Wood, steel & pipe industry | 📦 Long loads | 🌦️ Indoor & outdoor FT LOGISTICS – Quality we stand by. Service you can trust. ⚙️💼

Condition: used, mileage: 616,000 km, power: 191 kW (259.69 HP), first registration: 11/1997, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1997, Equipment: ABS, Manufacturer Scania Model P94/260 4x2 NZ SLS590 Kombi 8.400 l. Year 1997 Condition Good Serial Number XLEP4X20004373122 Ref. nr. 1327822 Reg. date: 26-11-1997 Hk: 260 Km: 616000 Gearbox: Manual GR900 Eurotype: 2 Diesel tank: 1 Tank liter: 400 l Cabin heater: ? Cabin type: CP19 Drum brake: ? ABS: ? Engine brake: ? Tire Size: 315/80R22.5 Cover% left 30 - 20% Pgedpfjwb Rbnjx Ag Djk Front suspension: Springs Suspension rear: Springs Wheelbase: 4300 mm Toolbox: ? Hydraulic system: ? Total weight: 18000 kg. Net weight: 12900 kg. Load capacity 5100 kg. Manufacturer: Simon Moos SLS 590 Tank capacity: 8420 liters. High pressure pump: Prattisolli MS55 High pressure capacity: 318 l/min Vacuum pump: Samson V15 Vacuum capacity: 1000 m3/h.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,942 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🇬🇧 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 COMBILIFT C4000 – DUPLEX 4600mm – Year 2019 – 3942 h – LPG / GAS – SIDE SHIFT – CONDITION 5/5 ⭐ Experience | Own service & paint shop | Professional consulting | Own transport | After-sales support Podpsy Aiuvofx Ag Degk 🔍 Looking for a forklift you can trust? We are a reputable European dealer of new & used forklifts. From small companies to major industrial plants – our forklifts mean reliability, safety, and smooth logistics. 💎 WHY CHOOSE US ✅ Full technical inspection – service, testing, oil & filter replacement, component regeneration 🧾 Full UDT inspection available 🎨 Own paint & service workshop – refined look & performance 🚚 Europe-wide transport by our trained drivers 🎓 Operator training & machine test at delivery 🛠️ After-sales support – we stay with you after purchase 👀 Machine viewing & testing available 🤝 Financing with leading leasing companies 💶 Invoice in EUR or PLN 🏷️ IN OFFER COMBILIFT C4000 – Four-way / Multi-directional forklift 📆 Year: 2019 | ⏱️ Hours: 3942 | ⚙️ Drive: LPG / Gas | 💪 Capacity: 4000 kg 🎯 Mast: Duplex 4600 mm | 🔧 Forks: 1200 mm | Positioner: 1150 mm 🛞 Tyres: Superelastic – 100% condition ✨ Condition: Excellent – after full service, rust-free, ready to work 📏 Free lift: 2250 mm Dimensions: Height 2400 mm | Length 2400 mm | Width 2250 mm | Positioner width 1150 mm | Structural height 3000 mm 🏗️ PERFECT FOR: 🏠 Narrow aisles | 🪵 Wood, steel & pipe industry | 📦 Long loads | 🌦️ Indoor & outdoor FT LOGISTICS – Quality we stand by. Service you can trust. ⚙️💼

Condition: used, machine/vehicle number: FBA11-2390-00377, Year of construction: 2015, operating hours: 7,513 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, gearing type: automatic, battery voltage: 48 V, fork length: 120 mm, color: orange, 2015 Doosan Forklift Type B18T-7 48 volt E0583 2015 Fork positioner Lifting capacity: 1,800 kg Fork length: 1.20 m Triplex mast Including charger Test valid until 10/26 = Further Information = Year of manufacture: 2015 Unladen weight: 3,356 kg Lifting capacity: 1,800 kg Podoyxg Dmepfx Ag Dogk CE marking: yes Overall condition: average Technical condition: good Visual condition: average

Condition: used, Year of construction: 2011, operating hours: 2,150 h, KOSME Extra 9 / 720 rotary labelling machine for bottle labelling using two self-adhesive stations (Self-adhesive) + one cold glue station, e.g. for tax bands. Pedoywcghepfx Ag Degk

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Pgodpjfz Nd Ijfx Ag Dsk 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Pedpfx Agjfz U Nbo Djgk Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Pjdpfofy T Spsx Ag Dsgk Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Pgedpfx Agsfx Nfme Dek Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, SLS12 is suitable for Bending & Cutting your rebar from the coils to the desired shape. High productivity and fast solution for projects. Product information: - Single Wire: 6-12 mm - Double Wire: 6-10 mm - Driving Motor Power: 11 kW Servo - Driving Speed: 120 m/min - Bending Motor Power: 4 kW Servo - Bending Speed: 1200°/sec. - Voltage: 400 V 50 Hz / optional 60 Hz - HMI 15" Display - Coiler: 3 to. (optional 5 to.) - Dimension Machine: 5000mm x 1710mm x 2340mm - Dimension Coiler: 2150mm x 2120mm x 2300mm - Net weight Machine: 3000 kg - Net weight Coiler: 1000 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us! Podpfxjm Tm H As Ag Djgk

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Pgsdoum U S Ejpfx Ag Dsk

Condition: used, mileage: 89,560 km, power: 235 kW (319.51 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, approx. 2200 Bh 06/23 Right-hand drive, TollCollect, water cooler and intercooler, ASR, ESS, EDC engine regulation, BreakMatic, MAN TeleMatics 2 GPRS, driver's comfort seat with air suspension and lumbar support, radio MAN TeleMatics 2 GPRS, video function, central locking, decorative inlays, entry lighting, electric door windows, Brake Assist 2, emergency brake signal (ESS), Visy side loader HS Speedline PPK 27m³, pendulum press 3.7m³, PLC control, color camera system 4x camera + 1x monitor, standard telescope stroke 1620 mm, lifter HSS 420 double comb for 2 MGB 80-240 liters EN 840-1 or 1 MGB 1,100 liters EN 840, electric central lubrication system, MD4 Pgjdpsf Dg R Esfx Ag Dsk

Year of construction: 2021, condition: ready for operation (used), functionality: unexamined, Basic package Selector 800 Lower belt BB 1350 mm AA 6.4m -profiled belt- SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts Podpfxjvm Upno Ag Dsgk

Condition: used, Year of construction: 2010, operating hours: 3,060 h, machine/vehicle number: 12225159, Empty weight: 10.290 kg Pgodpfoycbwzjx Ag Dek Lifting capacity: 450 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 4.52x1.22x3.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2009, machine/vehicle number: 12225151, Empty weight: 10.290 kg Lifting capacity: 450 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 4.52x1.22x3.57 Pgjdeya T Eropfx Ag Djk Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, machine/vehicle number: 122251195, Empty weight: 10.290 kg Lifting capacity: 450 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Psdjya T A Dopfx Ag Degk Transport dimensions (LxWxH): 4.52x1.22x3.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2009, machine/vehicle number: 12225151, Empty weight: 10.290 kg Lifting capacity: 450 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 60 Pgedpfx Agoyaxhxs Djk Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 4.52x1.22x3.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2016, operating hours: 964 h, machine/vehicle number: 12225.1248, Empty weight: 10.290 kg Lifting capacity: 450 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Transport dimensions (LxWxH): 4.52x1.22x3.57 Please contact PFEIFER GROUP for more information Psdjyaxhlepfx Ag Degk

Condition: used, Year of construction: 2015, machine/vehicle number: 121951124, Empty weight: 9.360 kg Podeyaxg Uspfx Ag Dsgk Lifting capacity: 700 kg Working height: 1.960 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 4.51x1.22x3.34 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, machine/vehicle number: 12225.1206, Drive: Wheel Empty weight: 10.290 kg Lifting capacity: 600 kg Working height: 2.250 cm Transport dimensions (LxWxH): 4.52x1.22x3.57 Please contact PFEIFER GROUP for more information Pgedpfoyaxgzsx Ag Djk

Condition: used, Year of construction: 2013, machine/vehicle number: 12225.1207, Drive: Wheel Empty weight: 10.290 kg Working height: 2.250 cm Transport dimensions (LxWxH): 4.52x1.22x3.57 Please contact PFEIFER GROUP for more information Pgedpfx Agsyaxgns Dok

Condition: used, Year of construction: 2013, operating hours: 3,060 h, machine/vehicle number: 122251195, Empty weight: 10.290 kg Lifting capacity: 450 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 4.52x1.22x3.57 Please contact PFEIFER GROUP for more information Pedpsyaxgbjfx Ag Djgk

Condition: used, Year of construction: 2007, operating hours: 247 h, machine/vehicle number: A200007286, Drive: Wheel Empty weight: 790 kg Pgjdetr Iq Sepfx Ag Dek Mast: articulated arm Lifting capacity: 230 kg Working height: 560 cm Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.36x0.76x1.63 Please contact PFEIFER GROUP for more information