Used Sporer Pcs Aqua Jumbo Iso Automatic Parts Washer for sale (42,375)

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR Lrjdpjwruw Ijfx Agrjt * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin Ljdpfowruw Usx Agrjrt * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit Ledpfx Agox H Taderjrt - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) Lredpfxoy Encws Agret We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20 h, functionality: fully functional, 2010 RYOBI 752P (Wide) Two-Color Reversible Printing Press Reversible Printing: 1+1 / 2+0 Maximum Sheet Size: 600 x 788 mm Maximum Speed: 15,000 Sheets Per Hour Paper Thickness: 0.04 – 0.6 mm Only 20 Million Impressions! Year: 2010 Equipped with: PCS-G Printing Control System Ryobimatic Dampening System Technotrans Alpha.d Refrigeration Unit IVS Ink Volume Setter Suction-Tape Feeder Table Semi-Automatic Plate Changer Automatic Roller Washer Automatic Blanket Washer Automatic Impression Cylinder Washer Automated Reversible Printing Unit Changeover Sheet De-Curler Steel Plate in Feeder and Delivery Grafix Digital 3000 Powder Spray Device High-Pile Delivery Cylinders are Damage-Free Rubber Rollers in Very Good Condition Spare Parts List & Manual Machine Tools Lodpfx Aozxp Sqogrsrt

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Ljdpfxeyr Dawj Agrort Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Lsdpfjy Tybnex Agrert Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: new, Year of construction: 2024, functionality: fully functional, Semi-automatic horizontal orbital stretch wrapping machine designed for wrapping long products such as timber, aluminium profiles, plastic extrusions, pipes, textiles and similar materials. Equipped with infeed and outfeed roller conveyors for easy product handling. Modell Robopac Compacta 12 Production year 2024 Installed power 1,5 kW Diameter 1200 mm Feeding roller Yes Outfeeding roller Yes Condition New (not used) Ledpfx Agozkf Sksrsrt Conveyors 2 pc. INCLUDED

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Automatic FROMM PM100002 Industrial Strapping Machine – Year 2022 – PET Strap – Automatic Wooden Slat Insertion System FROMM Packaging Automation industrial automatic strapping machine, model PM100002, manufactured in 2022 and designed for integration into an automated production and packaging line. The machine is particularly suitable for the automatic strapping of bundles, profiles, long products and industrial packages. Identification details Manufacturer: FROMM Packaging Automation S.r.l. Model: PM100002 Year of manufacture: 2022 Project number: 2110304 Serial number: 48.100002.057 Original delivery date: 19 September 2022 Machine configuration FROMM MH550 side-mounted strapping head KB4 strap dispenser Lower side magazine for wooden slats Automatic slat lifting system Automatic magazine movement Strapping arch Pneumatic system Electrical cabinet and control system Prepared for integration and communication with an automated production line Technical specifications Strap type: PET/plastic strap, 16 × 0.8 mm Strap feeding speed: 5.3 m/s Strap recovery speed: 5.3 m/s Adjustable tensioning force: 0.5–3.5 kN Final tensioning speed: 105 mm/s Power supply: 400 V – 50 Hz Maximum installed power: 3.8 kW Maximum current: 9.8 A Minimum compressed-air pressure: 6 bar The FROMM MH550 is a heavy-duty industrial strapping head designed for demanding applications, with a maximum tensioning force of approximately 3,500 N and friction-weld strap sealing. Documentation included. Only 108.000 cycles The machine is supplied with extensive original FROMM documentation, including: Complete instruction manual Electrical diagrams Pneumatic diagrams Spare-parts lists MH550 strapping-head manual Lrjdpfxozq Df Nj Agrjt KB4 dispenser manual The equipment was originally supplied as partly completed machinery intended for integration into a complete production line. The relevant Declaration of Incorporation is available.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Ljdpfx Aezzrutogrsrt Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Lredpfx Agowuz S Derot

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm Lsdpswd Emwsfx Agrjrt The technical data sheet can be found below the images; the operating instructions are attached.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Ljdezwvu Njpfx Agrjrt Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Ledpfx Agoz A Tbuersrt Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options Lredjziu Hzopfx Agrst This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Year of construction: 2018, operating hours: 8,580 h, condition: used, functionality: fully functional, machine/vehicle number: E21SI18102702508, This is a combination oven, model SCC 201 WE Elektro, from the premium manufacturer Rational. The unit has undergone a thorough inspection in our in-house workshop, has been fully refurbished, and is in perfect working order. The unit has accumulated 8580 operating hours. The recommended retail price is €21,940.00 (net) / €26,108.60 (gross). The stated price is gross, including 19% VAT. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device model? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or iCombi Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked and fully functional – or your money back. Flexible shipping or self-pickup options. Competent advice - before and after the purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. This combination oven offers space for 20 x 1/1 GN containers. In automatic mode, the unit independently recognizes the ideal cooking process, the size of the food, the quantity being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport WxH: 925x1900mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SI18102702508 Year of manufacture: 2018 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal insertion: 1/1, 1/2, 2/3, 1/3, 2/8 GN Servings per day: 150-300 Condition: Used, inspected, fully refurbished, in perfect working order. Additional information: Ljdpfx Ajz Etknsgrort In combination oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control - self-cleaning. Core temperature probe. Handheld spray nozzle with automatic retraction. 8.5-inch color display and touchscreen. 5 fan speeds programmable. Integrated, maintenance-free grease separation system. Automatic start time preselection. 7 cleaning levels for unattended cleaning - even overnight. Spraying can be adjusted in 3 levels - from 30°C to 260°C. 5 programmable fermentation levels. USB interface. Seamless, tub-shaped hygienic cooking chamber, rounded corners. Halogen cooking chamber lighting. Shipping: Delivery or self-pickup by arrangement. Worldwide shipping upon request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2008, Automatic machine for closing bottles with ROPP metal caps. The machine features smooth speed and output adjustment. Manufacturer: Z.M. ROBAK (POLAND) Model: AZR 08 Number of capping heads: 8 pcs Output: 2000 - 12000 bottles per hour (bph) Total power: 2.7 kW Year of manufacture: 2008 Weight: 2000 kg Lrodpfozl Ichsx Agret Used machine, in working condition.

Year of construction: 2025, condition: like new (used), functionality: fully functional, Manufacturer: Metzner Maschinenbau Year of manufacture: 03/21/2025 AM 3800 wire stripping machine Automatic cable assembly machine for cutting to length and stripping cables, stranded wires, and solid wires up to 20 mm in diameter and 70 mm² cable cross-section Technical features & advantages: - Double-knife cutting head as standard, i.e. superior - Outstanding cutting force for cables up to 70 mm² - Exceptional stripping force and, at the same time, gentle handling of the cable thanks to belt feed with support roller - Standard with PC software for controlling an ink-jet printer or processing complex sequences and cable lists; i.e. standard-equipped to meet all requirements without additional costs - Clear and user-friendly operation with 15" touchscreen FHD display - Program memory with cable library for instant availability of recurring orders - Consistently designed for a wide range of applications - Robust construction for continuous industrial use - Pneumatic clamping pressure with automatic pressure control for gentle cable handling during transport and cable stripping - Excellent serviceability thanks to the fastest possible change of feed belts - Thanks to its modular design, the AM 3800 can be optimally adapted to specific requirements and expanded with additional modules Standard scope of supply: - Cable processing machine Metzner AM 3800 - 1 set of V-knives - 2 swiveling-pneumatic cable guides with quick-change guide sleeves - Power connection cable 2.0 m - Data storage with documentation, operating manual Performance data: - Cable cross-section stranded wire max. *): 70 mm² - Cable cross-section solid wire max. *): 16 mm² - Cable diameter max. *): 20 mm - Flat ribbon cables *): ≤ 18 mm width - Cable lengths: 20 mm - 999 m - Stripping length cable end: 200 mm - Stripping length cable end: 145 mm - Feed speed max.: 180 m/min - Shortest cable length: 70 mm - Material feed direction: left - right Material-dependent Technical data: - Electrical connection: 230V, 50/60 Hz - Compressed air connection: 6 bar - Dimensions (LxWxH): 695 x 880 x 485 mm (without screen) - Weight: 100 kg - Color: Housing RAL 7035 / RAL 5018 / RAL 7016 CE conformity: The AM 3800 meets all CE machine directives regarding mechanical and electrical safety as well as electro- magnetic compatibility. Incl. accessories: - Cable-specific guide sleeves - Blowing device - Various knife sets consisting of: - Infeed guide - Swivel tube - Outfeed guide Note: One guide set is required for each cable diameter. AM 38XX connection for ink-jet printer AM 38XX connection for feeder AM38XX connection for material discharge Lsdpfjz Dat Tjx Agrort

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 05/2000, loading space length: 13,450 mm, loading space width: 2,430 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, wheelbase: 9,600 mm, color: other, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = Lredszvfqdjpfx Agret - Air Suspension - BPW Axles - Drum brakes - Steering Axle = More information = Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Empty weight: 7.900 kg Carrying capacity: 24.600 kg GVW: 32.500 kg Registration number: OG-37-HG

Year of construction: 2009, condition: good (used), For Sale: Make: Kittner Type: Crate washing machine + dryer Automatic feed Included: - Crate washer + dryer - Electrical diagrams The crate washer is adjustable in height and width. Maximum crate dimensions: width x height 420 mm x 270 mm Overall machine dimensions: length x width x height 4000 mm x 1200 mm x 1640 mm It is possible to view this crate washer on site. Lrjdpfx Aoznhwqogrst If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: used, Year of construction: 2011, Overview Bohrer R30 crate washer, built in 2011, for returnable bottle crates. The washer is currently part of a 15,000 bottles per hour bottling line. Stainless steel tunnel housing with inspection windows, access platform with stairs over the machine and its own stainless steel control cabinet. The machine is still installed and running in a mineral water plant. Technical data - Manufacturer: Bohrer - Model: R30 - Year of manufacture: 2011 - Machine type: crate washer for returnable crates - Currently installed in a 15,000 bottles/h line - Power supply: 400 V, 50 Hz - Connected load: 20 kVA - CE marked Equipment Ledpez Eh Sgsfx Agrert - Stainless steel tunnel housing with inspection windows - Access platform with stairs and railings - Stainless steel control cabinet with push-button operation and emergency stop Condition Used. The machine is still installed and under power at its production site and can be inspected by appointment. Availability Immediately.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms Lsdpfx Ageznlbyorsrt • Shirts and sportswear • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 4 kg, input voltage: 230 V, Equipment: documentation/manual, type plate available, For sale is a ZEISS GOM Scan 1 MV400, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research. Fast setup, easy operation. Condition: Like new, little used, primarily used for trade shows, exhibitions, and training. Scope of delivery: ZEISS GOM Scan 1 MV400 Original accessories according to standard configuration Power supplies and cables 10 m cable Transport case available Tripod and PC are not included in the offer and will not be provided, but can be offered separately upon request. ZEISS INSPECT OPTICAL 3D Free Open and edit new and existing projects Import of point clouds, polygon meshes Creation, editing, and processing of polygon meshes Element construction: regular geometries, points, sections, curves, surfaces, dimensions CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY Application of common alignment methods Comparison against CAD with colored deviation display Dimensional and form/position evaluations according to ISO GPS and ASME Y14.5 Report module Note: The device has only been used for demonstration, training, and presentation purposes. Ljdpfxjzypzuj Agrort A new 3D acceptance certificate will be provided upon purchase. Furthermore, we would offer to take in used optical GOM or Zeiss systems in part exchange upon purchase of the Zeiss GOM Scan 1 MV400.

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Equipment: documentation/manual, Mori Seiki SL150 & Iemca short bar feeder. The machine is fully functional. 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Lodszg A Saspfx Agrort Automatic Lubrication system Parts catcher

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS. Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Lsdpsw Enquefx Agrsrt Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 8 units in stock