Used Sscrubber-Dryer for sale (1,743)

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - Hedpfowziflox Anyeu ----- Technical Data ----- Maximum pressure: 16 bar, Power supply: 230 Volt

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Hodpfxey Ny U To Anyju

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Hodpfjzg Dx Usx Anysu Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 1,750 kg, total width: 1,120 mm, total length: 3,750 mm, number of chambers: 1, Equipment: documentation/manual, For sale: a high-performance fluid bed dryer from the renowned manufacturer Buhler, model OTWG-280. This is a horizontally constructed machine designed for the continuous thermal processing of bulk and granular materials. With its sectional design, the machine can function both as a dryer and a cooler, making it an extremely versatile element of any production line. The machine utilizes the principle of fluidization. The process involves blowing hot (or cold) air through a perforated base holding the raw material. The air lifts the material particles, forming a so-called "fluidized bed." In this state, each particle is surrounded on all sides by the heating/cooling medium, providing: - Instant heat exchange (significantly faster than drum dryers) Hjdpfx Ansy D Iiuoysu - Uniform drying with no risk of localized overheating - Gentle product handling – minimal risk of mechanical damage to raw materials We have two OTWG 280 units and one OTWG 90 unit available. The price for the OTWG 280 is listed in the advertisement. OTWG 90 price: 40,000 EUR.

Condition: good (used), Code: 0389 Brand: ISVE Hsdpjy Ti Ecefx Anysu Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Year of construction: 2025, operating hours: 150 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 103, This is prototype of the 570 series model, it has been completely refurbished. It has 96 trays at 60x40 cm and full temperature control on each tray. It has an extraction capacity of 25kg/hr. The machine will be delivered and mounted on location including one week of introduction by out technician. Hjdpfx Anjyut Hxeyeu

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: Width 600 mm, Height 600 mm, Depth 600 mm External dimensions: Overall width 796 mm, Height 1725 mm, Depth 850 mm Load capacity / Payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air volume flow: 96 m3/h Purge time (5 air changes): 90 sec. Hjdpfxszg Tpvo Anyeu Recirculation volume flow (enhanced): 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed at 300 °C Temperature selector limiter (TSL) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Temperature selector limiter (TSL): 2 Rated temperature: 200 °C Electrical data Rated voltage / Frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2024, Refrigerant dryer, OMEGA AIR, RDP 75 – used: Price ex works: €750.00 (net)! Manufacturer: OMEGA AIR Hsdozbydwopfx Anyju Type: RDP 75 Year of manufacture: 2024 Nominal flow rate: 75 m³/h Max. operating pressure: 16 bar Ambient temperature during operation: 1 °C to 45 °C Max. air inlet temperature: 55 °C Ph~V-Hz: 1~230-50/230-60 | 0.40 kW Protection class: IP20 Contains fluorinated greenhouse gases Refrigerant: R513a | 0.39 kg | CO₂ equivalent 0.22 t Operating hours: unknown Condition: good Available: from approximately August 2026

Year of construction: 1996, condition: ready for operation (used), functionality: unexamined, operating temperature: 250 °C, heating capacity: 36 kW (48.95 HP), usable tank capacity: 4,500 l, machine/vehicle number: 603928, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hsdpfx Asyxc I Ijnyeu Maximum drying temperature: 250 °C Usable volume: 4.5 m³ MACHINE DETAILS Type of heating: electric Dimensions (LxWxH): 200 x 150 x 150 cm Electrical Data Rated voltage: 400/230 V 50 Hz Connected load: 40 kVA Heating capacity: 36 kW Rated current/fuse: 58 A/63 A Protection class: IP 43 Exhaust air flow at 20°C with dampers open: 376 m³/h Exhaust air flow at 20°C with dampers closed: 133 m³/h

Year of construction: 2017, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: Asso 600 by Chiossi & Cavazzuti Hot air dryer for DTG printing good condition. Double belt conveyor. Hjdpfoyh Rgyjx Anysu Year 2017. Textile oven almost new, overhauled and cleaned. Sold new for just over €12,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti ASSO 600 drying tunnel: - MAX POWER: 9,5 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 600 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Drying Area: 2000x600 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: HANKINSON MODEL: HHDP2700 SERIAL NUMBER: 4001011004 YEAR: 2011 Hodpfx Aeyh Uvxenyeu POWER (kW): 7 CAPACITY (m³/min): 45 PRESSURE (bar): 16

Condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station Hodoyk S Tvopfx Anyju -Manufacturer: Heliostat granule dryer without drying container -Type: Heliostat WFAT-8490 -Individual components: see photos -Dimensions: 1360/1340/H1910 mm -Weight: 757 kg/unit

Condition: excellent (used), Year of construction: 2019, MANUFACTURER: DRYTEC MODEL: MDA3600 SERIAL NO.: 3519MBP00146 YEAR: 2019 POWER (kW): 0.075 Hsdpfx Aeyzzulenyou CAPACITY (m3/min): 60 PRESSURE (bar): 10

Condition: good (used), functionality: fully functional, R A Lamb E28.5 Section Dryer • Compact instrument that quickly dries racks of slides using a stream of warm air • Selectable air temperature from ambient to 70°C allows efficient drying of slides • Hinged lid allows warm air to escape via spaces on either side • The lid and chamber lining are made from polished stainless steel for easy cleaning • Controls are located on top to protect them from moisture when lid is open • Deep chamber holds large slide racks • Racks containing slides are placed on a grill in the glass-fronted chamber Technical Specification Dimensions, external [w x d x h], mm 285 x 245 x 129 Dimensions [w x d x h], mm 260 x 80 x 108 (chamber) Hedpju Tkcxjfx Anysu Mass, kg 4.1 Electrical supply 220V to 240V, 50/60Hz Good working condition. Please check out our other listings as well.

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying Hsdpfjv Si Szox Anyeu 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2020, Atlas Copco FX 14 Hjdpfx Anewhv Adjysu Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 12,00 m³/min

Condition: good (used), Year of construction: 2014, Almig ALM260 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 4,00 m³/min Hodpfxowhwlys Anyeu

Condition: used, Year of construction: 2010, TA 5 compressed air refrigeration dryer, with a volume flow of up to 0.60 m³/min. Refrigerant: R134a Additional title: Compressed air dehumidifier Volume flow: 600 l/min. Overpressure: 16 bar Power: 0,29 kW Current: 2,0 A Voltage: 230 V Hodpfx Answ Tduwsysu Frequency: 50 Hz Position: free standing

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Hjdpfx Aneitcu Esyju Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Condition: used, Year of construction: 2015, Ride-on scrubber dryer, scrubber dryer, floor cleaning machine, mop machine, floor cleaner Hjdpfxer Htnco Anyeu -Manufacturer: Hako, scrubber dryer with traction drive -Type: Scrubmaster B30 -Voltage: 24 V / 1.1 kW -Battery: 2x Hoppecke 12 V 80 Ah, see photo -Dimensions: 1250/780/H1100 mm -Weight: 151 kg

Condition: like new (used), Year of construction: 1998, KAESER SECOTEC TF 171 REFRIGERATION DRYER Capacity 17 m3/min Hodot Hdimjpfx Anysu THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Hedpfx Asxmg A Ajnyeu Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, machine/vehicle number: Katalognummer: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Hodpfoxnptgjx Anyeu Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L) × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 750mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Features: 2-tank system. The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. Simple operation thanks to a small number of yellow-coded controls. Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. Designed for daily use. Robust, durable, and reliable device.

Condition: excellent (used), The machine is ready for operation. Gate size: 110 cm height and 97 cm width. Hsdpfx Anjycx Hmoyou

Condition: new, This listing is for a Brand New Harvest Right XL Home PRO Freeze Dryer sold through We are stock holders in UK A home Pro freeze dryer from Harvest Right allows you to preserve the food your family loves to eat. Freeze drying locks in both flavour and nutrition and can last for years, making freeze-dried food even better than fresh! A home freeze dryer is perfect for any lifestyle. What’s Included - XL Freeze Dryer - XL Premier Industrial Vacuum Pump (approx. £1600 value) - Vacuum Pump Oil - Oil Filter - Stainless Steel Trays (set of 6) - Guide to Freeze Drying - Mylar Bags (50 ct) - Oxygen Absorbers (50 ct) - Impulse Sealer Features - Tray space: 2251 sq. inches - Freeze dry 18 to 22KG. fresh food per batch - Freeze dry up to 4536KG. fresh food per year (This would require a person to use the freeze dryer 4 times a week for 50 weeks a year) Dimensions - Freeze dryer exterior dimensions: 617mm W x 950mm D x 904mm H - Perfect for counter top, cart, or table. Weight of freeze dryer: 117KG 10 CFM industrial vacuum pump included/no extra cost (approx. £1600 value) Power Standard UK 230v Shipping Info - The large freeze dryer ships with a total weight of 170 Kg. One freeze dryer package: 77cm W x 122cm D x 133cm H Shipping size includes custom pallet. Maintenance Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Hodpfjxx Am Isx Anyou Warranty 1 Year international warranty provided by Harvest Right.