Used Stromab Drip Saw, Pneumatic for sale (12,535)

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available Itodpfx Aeyyz Ebenysk ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: good (used), Year of construction: 1993, machine/vehicle number: 28794, Offer 24419 Technical data: - Roller diameter 520 mm - projection 510 mm - max. passage height 420 mm - Table size 750 x 800 mm - Table swivels left + right 15 / 30 ° - Table height from floor 1020 mm - Saw blade length 4120 - 4200 mm - saw blade width 20 - 25 mm - infinitely variable cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welding unit in the machine stand - Grinding stone - Shears + air pump - lighting Itodeuk D I Repfx Anysk

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. Itsdpfozg Il Sex Anyek - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, TECHNICAL DETAILS Travel range X-axis: 3,700 mm Travel range Y-axis: 2,100 mm Travel range Z-axis: 370 mm Rotational range C-axis: 0–362° Swivel range A-axis: 0–90° Travel time C-axis (0–392°): 3 s Travel time A-axis (0–90°): 2 s Spindle speed: 6,000 rpm Spindle power: 16.5/56 kW Isdpfxjzuyryj Anystk Speed X-axis: 30 m/min Speed Y-axis: 30 m/min Speed Z-axis: 5 m/min Dimensions of tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade inclination (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Itodev A Htkopfx Anyjk Total power requirement 10,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Itedev A Htdjpfx Anyjk Weight 1000 kg Total power requirement 8,5 kw

Condition: new, Year of construction: 2026, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 350 mm, air pressure: 6 bar, section length (min.): 50 mm, HECHT Double Mitre Saw Exenso DS350E - 3000 mm for wood, glass strips, mullions, profile strips, aluminum strips, etc. Item number 942.5103, 1 piece, HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inward) to 135° (outward) - Right head is adjustable - Saw blade mounting Ø 350 mm - Incl. 1 piece of center support. - Clamping of the units is pneumatic. - Positioning control Exenso DS3 with touch panel, 15" display in a dust-protected monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of cutting data manually - Processing of data from a cutting list (data set according to specifications) - Processing of measuring tape data (radio measuring gauge GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Ijdpezr Uu Refx Anystk Item number 942.5203, 1 x DS feed device, hydropneumatic Item number 723.0121, 2 x DS saw blade for wood Bevel/bevel/flat tooth - positive - Item number 942.5236, 2 x DS workpiece clamping, combined (4 x horizontal, 4 x vertical clamping elements) Combined workpiece clamping consisting of: Swivel clamp, pneumatic - for clamping the material from above. (Free access to the work table) Horizontal clamp, pneumatic - torsion-resistant clamping cylinder with pressure piece. The clamps can be selected individually via the saw's control system. The clamping sequence can also be set via the control system. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item number 942.5241, 1 set DS350 table support, grooved (standard groove), Special grooving according to customer drawing on request! - Documentation: 1 x German or in the respective national language - Item number 945.2007, Packaging DS350 (transport frame) - Item number 944.1023, GMF measuring gauge, 3000 mm complete set (1500 mm plus extension 1500 mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glass strips. Function For use on doors and large window sashes, the GMF measuring gauge can be extended mechanically and safely up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection and calculation.

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 in good condition, cleaned and checked Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, Iodpfx Ansivaryjyotk which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 900 kg Total power requirement 5 kw Isdpfx Anjv A Hr Teyetk

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Iodpfxsy Ulvas Anystk Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: excellent (used), functionality: fully functional, I sell a complete square of raw material imported from Germany and available for pickup in Osla near Boleslawiec. Manufacturer: Holtec + Falcone Germany, Range of processed diameters: from 14 to 65 cm Range of processed lengths: from 2.0 mb to 15 mb In the price of the sorting plant a very large stock of spare parts, i.e. chains, reducers, motors, cables. The raw material yard consists of: - Long timber feeder - 2 x Feeder for short timber, - Kesla brand crane at the feeding table for leveling the raw material on the table, - Complete operator station (cameras, monitors, computer), - Sorting plant system operating software, Itjdpfx Aovcqi Aonysk - Scanner of the amount of sorted raw material, - Falcone 550 debarking machine from 2014, - Dripping saw, diameter 1600 mm, - Metal detector, diameter max 650 mm - Single boxes: 44 pcs. - Bark removal system from under the debarking machine - Removal system for waste generated during dripping. - Automation control , full optimization based on the set parameters . - Line capacity: up to . 300 000 m3 per year in two shifts

Condition: used, Year of construction: 2000, Used, good condition Make: Schneider Type 2406 Year of manufacture: 2000 Machine no. 910 CE-certified Cutting height 250 mm Saw blade tiltable between 90° and 30° (60°) Turntable rotatable 180° Motor power 7500 W, 400 V Saw blade diameter 650 mm Cutting height for rip cuts Continuously adjustable from 0 to 250 mm Cutting width adjustment for rip cuts Iodpfowkvw Hjx Anyotk 650 mm by transverse saw movement Motorized tilting with digital display Movable machine stand Automatic saw feed with two-hand control Laser kerf indicator, cross cut Pneumatic workpiece clamping on the right and left New price approx. €25,000.00 Extraction connection 100 mm Space required approx. 2800 mm x 2800 mm x 2000 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on freight, unpacked Handed over in as-is condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels Iedpfx Ansuc Idxoystk

Condition: good (used), Year of construction: 1995, Panel saw Manufacturer: Martin Model: T72 Year of manufacture: 1995 - When the machine is switched on, the control display takes approx. 15 minutes to show any information. - The flat belt for the scorer is missing. Needs to be replaced. - The pneumatic clamping of the parallel fence does not clamp. Carriage length: 3,300 mm Cutting width: approx. 1,200 mm Cutting height: approx. 170 mm Saw blade diameter: max. 500 mm Power: 5.5 kW Speed: 2,800 / 4,000 / 5,500 rpm Scorer: Yes Isdpey A I Nrjfx Anyjtk Motor brake: Yes

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Itedpfx Anjw Nac Aoyjk Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, maximum cutting height 160 mm maximum cutting width 610 mm disc diameter 600 mm minimum disc diameter 590 mm disc rotational speed 2800 rpm motor power 7.5 kW 2 stops Ijdpfeymnvlox Anyjtk year of manufacture 2001 weight approx. 700 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Year: 2019 Condition: excellent, as new Technical specifications and equipment installed on the machine (standard and options): - No.2 new FOM carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM Itjdpfxswk R A Dj Anyek - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: used, Year of construction: 1986, machine/vehicle number: 0783, type of input current: three-phase, input voltage: 400 V, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg Iedpfx Anot A Ar Sjyotk The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Ijdjylp S Espfx Anystk Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg Itsdpfx Ansx Eb Aneyek - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts

Condition: used, Year of construction: 2023, For sale is a professional, two-spindle multi-blade saw, model WP 165, designed for efficient longitudinal cutting of wood. This machine is ideal for sawmills and facilities producing packaging components, pallets, structural timber, boards, and garden elements. Thanks to the use of two parallel spindles with a set of circular saw blades, the machine provides high performance, precise cutting, and uniform blade wear. The adjustable spindle carriage allows for adjusting the spindle position, which ensures optimal tool load during operation. Material transport is carried out using four pairs of driven rollers, which ensure secure guidance of the timber. The clamping force is pneumatically adjustable, allowing for stable cutting of both dry, wet, and frozen wood. The machine's design guarantees straight cuts even when processing long materials. Depending on the type of wood, its moisture content, and the number of cuts, the output is approximately 10–18 m³ of wood per hour. TECHNICAL SPECIFICATIONS: - Model: WP 165 - Type: Two-spindle multi-blade saw - Maximum blade diameter: 300 mm - Maximum distance between outermost blades: 320 mm - Minimum cutting thickness: 30 mm - Maximum cutting height: 165 mm - Maximum timber width: 500 mm - Minimum material length: 700 mm - Spindle speed: 3350 rpm - Feed rate: 30 m/min - Main motor: 90 kW - Second spindle motor: 75 kW - Feed drive motor: 2.2 kW - Power supply: 3 × 400 V - Pneumatic system pressure: approx. 0.4 MPa (4 bar) - Sawdust extraction: lower – by conveyor or pneumatically, upper – pneumatically. - Year of manufacture: 2023 Machine dimensions: - Width: 1950 mm - Height: 1640 mm - Length (without tables): 1960 mm - Equipment: two-spindle blade set, driven material feed, pneumatic material clamping, infeed table included. Itedpezkg Iyjfx Anyjk This machine is a robust construction designed for intensive operation in a sawmill. The high drive power (90 kW + 75 kW) allows for efficient cutting of thick timbers with high throughput. Please contact us by phone. Machine viewing is possible by prior arrangement. - Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Lublin Voivodeship It is possible to test the machine on-site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT We also offer a wide selection of woodworking machines, including: panel saws, band saws, and circular saws, planers, jointers, milling machines, grinders, edge banding machines, four-sided planers, drills, presses, lathes, dust extractors, and many other devices from reputable manufacturers. Our range includes machines from brands such as: ALTENDORF, SCM, MARTIN, FELDER, HOLZ-HER, ROBLAND, WEINIG, CASADEI, BRANDT, MAGGI, SAC, STETON, HOUFEK, IMA, OTT, BÜTFERING, HEBROCK, BERNARDO, HOLZMANN, and many others.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 550 mm, Double mitre saw Elumatec DG 142/01 Cutting length min 300, max 4500 mm Max. saw blade diameter 500 mm Pneumatic angle adjustment 45-90 degrees Digital angle display Automatic length positioning Moving roller conveyor Itodpfjzi Uxdsx Anyjk Pneumatically foldable support arms Label printer

Condition: used, functionality: fully functional, saw blade diameter: 300 mm, total length: 405 mm, total width: 90 mm, total height: 125 mm, overall weight: 500 kg, OMGA TR2 Double Miter Saw for Wood and Aluminium – After Technical Overhaul, Ready for Operation Specification: • Condition: Used, after a comprehensive technical overhaul • Manufacturer: OMGA • Model: TR2 • Main motors: 2 x 2.2 HP (3,000 rpm) • Pneumatic control of cutting heads • Max. cutting length: 320 cm • Min. cutting length: 15 cm • Max. cutting section: 85 x 140 mm (at right angle) • Max. blade diameter: 300 mm • Angle cutting range: from -45° to +45° (left/right) Ijdpfx Anjy Dpxdsystk • 3 operation modes • Vertical workpiece clamps • Weight: approx. 500 kg • Overall dimensions: 405 x 90 x 125 cm (L x W x H) Additional Information: • The machine is in good technical condition and ready for immediate use • The photos presented show the actual condition of the item for sale • It is possible to connect and test the machine on site • The auction price does not include VAT or transport costs Financing and Transport: • We organise transport using the MDD fleet, courier services or external carriers • We offer financial support in the form of leasing or lease loans

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Itedpfxjzvhkyo Anyek

Condition: good (used), Year of construction: 2019, saw-blade dia. 370 mm cutting capacity - round 115/ 90° mm Itedpfsvxli Nsx Anyek cutting capacity - square 110 x 110 /90° mm cutting capacity - flat 110 x 110 / 90° mm cutting capacity - flat 100 x 100 / 45° mm cutting capacity - round 115 / 45° mm cutting capacity - square 100 x 100 /45° mm saw blade turning speeds 22 / 44 U/min voltage 400 V / 50 Hz Motor output 3 kW machine weight ab. 0,27 t Dimensions (L/W/H) 980 x 790 x 780 mm • New, unused saw • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 45° left, 45° right