Used Svetruck 1260 Forklift Built In 2013 for sale (27,598)

Condition: good (used), functionality: fully functional, Year of construction: 2002, load capacity: 25,000 kg, lifting height: 3,200 mm, Description WEIGHT OF FORKLIFT 31100 KG POWER 100KW MAX LIFTING CAPACITY 25000 KG MAX LIFTING: 3200mm CAMERA FOR CLIENT WE CAN ORGANIZE AS WELL SPECIAL TRANSPORT FOR CLIENT Specifications Manufacturer MORA - SPAIN Model M250 CS Year 2002 Iedpfx Asvlazajpcoar Condition Used overhauled

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Iedpsx U Eyfjfx Apcoar

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, operating hours: 100,000 h, input voltage: 4,000 V, type of input current: three-phase, total length: 65,000 mm, overall weight: 40,000 kg, controller model: partially manual, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Iasdpfjwycrcjx Apcor

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Iaodpfx Aowzzzfopcjr Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: like new (used), Cooling tank with pump for various applications Vogel pump 41 l/min, with electric connector and fluid connection. Level indicator. Iasdjx Tzkqjpfx Apcer

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 30,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,085 mm, power: 210 kW (285.52 HP), fork carriage width: 3,450 mm, fork length: 2,400 mm, empty load weight: 41,100 kg, total length: 6,650 mm, drive type: Diesel, construction width: 3,450 mm, Diesel Forklift Load Center: 1200 Fork Width: 275 mm Fork Thickness: 110 mm Mast Type: Duplex Transmission: ZFWG210 Condition: New Technical Condition: New Front Tire Type: Pneumatic Front Tire Size: 16.00-25 Isdjx Nz Eyjpfx Apcjar Front Tire Condition: New Rear Tire Type: Pneumatic Rear Tire Size: 16.00-25 Rear Tire Condition: New Description: Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Heating, Soot Filter, Full Cab, Air Conditioning, CE Certificate, Twin Tires

Condition: used, mileage: 86,445 km, power: 132 kW (179.47 HP), first registration: 04/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,190 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: steel-air, total length: 7,990 mm, total width: 2,200 mm, loading space length: 6,000 mm, loading space width: 2,200 mm, loading space height: 950 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, fog lights, power assisted steering, power mirror, soot filter, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Speed limiter - Air horn - Particulate filter - Radio/CD player - Beacon light - Sun visor - Toolbox - Central lubrication system = Further Information = Technical information Number of cylinders: 4 Engine displacement: 4,485 cc Axle configuration Brakes: Disc brakes Front axle: Max. axle load: 4,360 kg; Suspension: leaf suspension Rear axle: Twin tyres; Max. axle load: 8,240 kg; Suspension: air suspension Weights Unladen weight: 4,600 kg Payload: 8,000 kg Gross vehicle weight: 12,600 kg Functional Loading platform height: 95 cm Identification Registration number: 34-BKP-8 IVECO EUROCARGO 12-60 4X2 FLATBED / MACHINE TRANSPORTER EURO 6 | PACKAGE | 180 HP DRIVE 4X2 Iasdpfx Aexr Un Depcer WHEELBASE 419 CM LEAF / AIR SUSPENSION DAY CAB AIR CONDITIONING, RADIO/CD PLAYER AIR HORN, X-LIGHT MANUAL TRANSMISSION LOAD AREA LENGTH 600 CM LOAD AREA WIDTH 220 CM LOAD FLOOR HEIGHT APPROX. 95 CM RAMP LENGTH 160 CM AND WIDTH 47 CM TOOLBOX TRAILER COUPLING FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), Desposer kitchen waste disposal unit, waste shredder, garbage chute -Power: 0.75 kW -Voltage: 230/460 V -Speed: 1725 rpm (60Hz) -Connection: Ø 170 mm -Quantity: 2 available Price: per piece -Dimensions: 230/H440 mm -Weight: 20 kg Iaodpfjb A Hp Ijx Apcjr

Condition: used, WEBSTER & BENNETT DH 48” VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND Iodexcn Hujpfx Apcear MODEL DH 48” TABLE DIA 1219.0 mm SWING 1524 mm HEIGHT UNDER RAIL 650.0 mm SPEED 4.5 – 100 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS 2 AXIS MITUTOYO DIGITAL READOUT 4 JAW CHUCK 4 CHUCK JAWS SAFETY GUARDING COUNTERWEIGHT CLEAN CONDITION

Condition: used, Year of construction: 2004, ECOCA SJ20MC 3 AXIS CNC TURNING CENTRE MAKE ECOCA, MADE IN TAIWAN MODEL SJ 20MC YEAR 2004 CONTROL FANUC 18-T MAX. TURNING DIA 170.0 mm MAX. TURNING LENGTH 300.0 mm SWING OVER BED 380.0 mm Iodpfxstvav Ij Apcoar OVER CROSS SLIDE 225 MAX. SPINDLE SPEED 4,500 RPM POWER TOOL SPEED 4000 SPINDLE NOSE A-5 / A2-6 DRAW TUBE DIA 45 RAPID TRAVERSE RATE X24 / Z24 PLUS VDI20 TOOLING PARTS CATCHER SWARF CONVEYOR POWER TAIL STOCK TURRET TOOLING

Condition: good (used), MEASURING STRAIGHTEDGE SET in wooden case, 3 pieces - 3 x lengths in wooden transport box - DIN 875 - GRADE 1 - 2 x length 1600 mm - 1 x length 2700 mm - Total weight approx. 170 kg Iasdpfx Apex At Rfscjr Errors and omissions excepted.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 16,420 h, load capacity: 30,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, power: 170 kW (231.14 HP), fork carriage width: 3,450 mm, fork length: 2,500 mm, empty load weight: 41,100 kg, total length: 6,650 mm, drive type: Diesel, construction width: 3,450 mm, Diesel forklift Load center: 1200 mm Fork width: 270 mm Fork thickness: 110 mm Mast type: Duplex Transmission: ZFWG210 Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 16.00-25 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 16.00-25 Rear tires condition: 80 - 100% Iodpfoxwz Stex Apcear Description: Sideshift, fork positioner, third and fourth hydraulic valve, rear working lights, front working lights, heater, full cab, air conditioning, CE certificate, twin tires, replaced Volvo TAD750 engine, automatic lubrication system, camera system on carriage.

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 15,353 h, load capacity: 16,000 kg, lifting height: 4,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: simplex, construction height: 3,720 mm, motor manufacturer: Volvo Penta TAD650VE, fork length: 2,400 mm, Equipment: cabin, full service history, Transmission completely overhauled in 9/2023. Replacement engine, Volvo Penta TAD650VE, installed in 06/2023. The forklift has been completely refurbished. New maintenance and new UVV safety inspection possible upon request. Short-term delivery available. Iaodpfxjxrgias Apcsr

Condition: used, Year of construction: 2004, fuel type: diesel, gearing type: automatic, Equipment: cabin, Manufacturer: SVETRUCK Type: TMF 15/11 Year of construction: 2004 Hours: 46.380 Engine: Volvo TWD 1240 VE kW / PS: 275 / 374 Weight: 57.500kg Payload: 19,000kg (when telescopic boom retracted) 11,000kg (when telescopic boom fully extended) Iaodswlinuspfx Apcsr Lifting height: 8,900mm max 7,200mm measured below the timber tongs Area of the tongs: 5.5m² Depth of the tongs: 1,200mm

Condition: new, functionality: fully functional, machine/vehicle number: 25D3001413, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 2,230 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,230 mm, motor manufacturer: Kubota, DGUV certified until: 10/2026, fork length: 1,200 mm, tire condition: 100 %, overall weight: 4,735 kg, Equipment: UVV, sideshift, The UN Forklift F Series 3.0T combines robust engineering with modern safety features and high reliability. Equipped with the proven Kubota V2403 EU5 diesel engine and comprehensive special equipment, this forklift is ideal for industrial settings, warehouses, construction sites, and demanding outdoor operations. The exact technical specifications can be found in the last image. Isdpoxzpukofx Apcsar

Condition: new, functionality: fully functional, machine/vehicle number: 25B2501415, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 2,250 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, battery capacity: 460 Ah, battery voltage: 80 V, battery weight: 340 kg, DGUV certified until: 10/2026, fork length: 1,200 mm, tire condition: 100 %, overall weight: 4,340 kg, empty load weight: 4,100 kg, color: yellow, Equipment: UVV, sideshift, The UN Forklift V Series 2.5T is a powerful, modern electric forklift designed for professional use in warehouses, industry, and production. With lithium-ion technology, high-quality controls, and extensive special equipment, this new unit offers maximum efficiency, safety, and operator comfort. The exact technical specifications can be found in the last image. Isdexzprvspfx Apcear

Condition: new, M&S Gruseck GmbH NEW Trommel Screens from the market leader – 100% MADE IN GERMANY! Trommel screen suitable for a Terra Select T40 Square offset perforation (QV) 25mm Sheet thickness = 6mm !!! More than 500 manufactured trommel screens per year speak for themselves !!! - High-quality workmanship! - Consistently tested! Perfect concentricity during operation! - Best price-performance ratio! - Short delivery times! - Stamped perforations for perfect screening results! - Various perforation styles (square, round, honeycomb, etc.)! - Narrow web spacings for optimal screening area! - Various sheet thicknesses available! - Various materials possible (min. S355)! - Special customer requests are no problem for us—they are our specialty! - All drums are painted! Ijdpfjxvqn Isx Apcjar - Large selection in stock! - Suitable for all common screening machines!

Condition: used, Year of construction: 1996, operating hours: 11,088 h, load capacity: 10,000 kg, lifting height: 5,000 mm, load center: 600 mm, Brand: Svetruck Model: 1060-30 Year of manufacture: 1996 Operating hours: approx. 11,088 h Load capacity: 10,000 kg Lifting height: 5,000 mm Load center: 600 mm Fuel: Diesel Volvo engine, 6-cylinder Condition: Good used (hydraulic pump replaced one year ago, hand brake caliper fully overhauled, forklift stored in dry conditions, equipped with two new tilt cylinders, new bolts, and pendulum bearing on the rear axle (steering) replaced). Iasdpfx Aoxbczdjpcsr Regular inspections carried out.

Condition: good (used), Zip Wire closed spiral in spools Iedpswunmbofx Apcear 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: used, Fine boring head, spindle tool, boring head, bridge tool, fine boring head boring tool, boring spindle, boring bar Holder for bridge tool = SECO - epb GRAFLEX (Made in France) type A731 200 Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-010 Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500 Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-600 Tool holder: GRAFLEX holder size G7 = Ø 46 mm Machining diameter: 200-280 mm Adjustment accuracy: 0.01 mm Machining depth without extension: max. 140 mm - Adjustment by micrometer spindle and vernier (in steps of 0.01 mm, graduation 2.5 µm, to the diameter) - Cutting insert holder for Route cutting insert with approx. 10 mm edge length Total tool length with extension and mounting spigot: 184 mm Weight complete: 11.5 kg Ijdpsqgpb Eofx Apcear Very good condition, as good as new - probably unused

Condition: new, M&S Gruseck GmbH NEW screening baskets from the specialist – 100% MADE IN GERMANY! Screening baskets suitable for the Doppstadt AK series 430, 435, 510, 535, 560, 635, 640, etc. - TOP QUALITY - Various perforations - Short delivery times Many other spare parts also available from stock: - Rear screens - Tailgates - Various impact plates - Wear plates Iodsxp Nzmjpfx Apcoar - Scraper floor rails - Hammers - Hammer holders - ... AND MUCH MORE!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Doppstadt SM620 Ijdpfjxnyp Ejx Apcsar Square staggered perforation (QV) 12mm Sheet thickness = 6mm --- Over 500 manufactured screening drums per year speak for themselves --- - Premium quality! - Individually tested! Perfect concentricity during operation! - Excellent value for money - Short delivery times! - Punched perforations for optimal screening results! - Various perforations available (square, round, honeycomb, etc.)! - Narrow web spacing for maximum screening surface! - Various sheet thicknesses! - Various materials available (at least S355)! - Special customer requirements are not a problem for us—they are our specialty! - All drums are painted! - Large selection in stock! - Compatible with all common screening machines!

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the Market Leader - 100% MADE IN GERMANY! Screening drum suitable for a Terra Select T60 Square staggered perforation (QV) 15mm Sheet thickness = 6mm !!! Over 500 screening drums manufactured per year speak for themselves !!! Iajdpsxny Egefx Apcsr - Premium quality! - Thoroughly inspected! Perfect running accuracy in operation! - Best price-performance ratio - Short delivery times! - Precision-punched perforations for perfect screening results! - Various perforations available (square, round, honeycomb, and more)! - Narrow bridges for optimal screening area! - Different sheet thicknesses! - Various materials possible (at least S355)! - Special customer requests are not a problem for us but our specialty! - All drums are coated! - Large stock selection! - Suitable for all common screening machines!

Condition: new, M&S Gruseck GmbH NEW Screening Drums from the market leader – 100% MADE IN GERMANY! Screening drum suitable for a Terra Select T60 Square staggered perforation (QV) 20mm Sheet thickness = 6mm !!! Over 500 screening drums produced per year speak for themselves !!! - Premium quality! - Always quality-checked! True running in operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! Ijdpfsxny Hqex Apcear - Various perforation types (square, round, honeycomb, etc.)! - Narrow bridges for optimal screen surface area! - Various sheet thicknesses! - Different materials possible (at least S355)! - Special customer requests are no problem for us—they are our specialty! - All drums are painted! - Large inventory available! - Suitable for all standard screening machines!

Condition: new, M&S Gruseck GmbH NEW screening drums from the market leader – 100% MADE IN GERMANY! Iodpfx Apexnyhhecear Screening drum suitable for a Doppstadt SM518 Square, straight perforation (QG) 20mm Sheet thickness = 6mm !!! Over 500 screening drums manufactured per year speaks for itself !!! - Premium quality! - Always inspected! True running in operation! - Best price-performance ratio - Short delivery times! - Stamped perforations for perfect screening results! - Various perforations available (square, round, honeycomb, etc.)! - Small bridges for optimal screening area! - Various sheet thicknesses! - Different materials possible (at least S355)! - Special customer requirements are not a problem for us – they are our specialty! - All drums are painted! - Large stock selection! - Suitable for all common screening machines!