Used Telemetry Division Microdac B1A for sale (373)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Pedpoz Ag Rrefx Ai Tsgu Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: ready for operation (used), Volland Telemetry MICRODAS B1 Type: BW 2, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Pgjdpfez Adhzox Ai Teu

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Multiple programs can be stored for turning and milling operations. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via belt drive; within the stages, operation can be continuously adjusted using a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end-of-travel shut-off. Hydraulic copying slide with V-shaped tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center punches, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition from a small carpentry shop. The machine obviously was not used for high-volume production. Podpfx Ajzfwm Nsi Tsgu Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this seller".

Condition: used, Year of construction: 2018, Fendt Vario 516 (Int. No. 20869) Fendt Vario 516 Profi Plus Year of manufacture: 2018 First registration: 2021 2,960 operating hours 163 hp / 120 kW 50 km/h version Power Beyond Automatic climate control SuperComfort seat Evolution dynamic / DL Vario terminal 10.4" Terminal bracket Radio - CD MP3 with hands-free system 2 additional coaxial speakers Guidance system basic package Agronomy basic package Telemetry basic package Smart Connect Machine control basic package Universal holder for mobile phone VisioPlus cabin VarioGuide roof hatch Vario TMS Pneumatic cabin suspension Automatic drawbar coupling, 38 mm pin Swiveling fenders Electrically adjustable exterior mirrors + wide-angle mirror Segment windshield wiper Rear wiper and washer Immobilizer DL - Supply system / 2-line system Heated fuel pre-filter EHR control, rear linkage EW Top link SK, hydraulic, Cat. 3/2/90 Front linkage, Cat. 2, position control / relief Front PTO, 1000 rpm Preheating package Lockable fuel tank cap Lockable fuel tank cap SCR Planetary rear axle PTO 540/540E/1000 rpm Hydraulic pump 158 l/min Additional valves, double-acting 1/1 + 1/23, rear, DUDK External hydraulic valve actuation Return line, front Return line, rear, pressureless Additional valve, double-acting 2/1, front Additional valve, double-acting 2/2, front Additional valve, double-acting 1/3, rear, DUDK Additional valve, double-acting 1/3, rear, DUDK Additional valve, double-acting 1/5, rear, DUDK Fire extinguisher Emergency kit LED rear light LED turn signals 2 pairs of LED work lights, roof, rear LED work lights, A-pillar + rear fender Podpfx As Af Uhlei Togu LED work lights, roof, front LED work lights, roof, front, interior Additional front lighting LED rotating beacon, left Corner lights Front loader Fendt CARGO Profi 4X/80 FL - Damping system DW FL - Hydraulic tool locking Tire size, front: 540/65 R28 142D TB (50%) Tire size, rear: 650/65 R38 157D TB (50%) Financing available from 2% for used and new machines. This is merely an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will be happy to assist you with financing options in Germany and abroad. It is possible to trade in other machines.

Condition: used, Year of construction: 2024, Reduced from 50 to 40 km/h, Factory-installed equipment, previously: C141 – 7-pin trailer socket, standard version V015 – Profi+ Setting 2 L041 – Quick Start guidance with RTK M150 – Standard compressor M122 – Emission stage V Pedpfx Aj Af Rfmji Tsgu M096 – Reversing fan M038 – Heated fuel pre-filter M070 – Standard fuel tank G007 – Planetary rear axle G034 – 50 km/h version G085 – Flange stub 1 3/8", 6-piece K028 – 3-point linkage, Cat. 2/3, without top link K015 – EHR control, power lift DW / relief K039 – Top link, Cat. 3/2 K220 – Ball bushing, Cat. 2, for top link K215 – Ball bushing, Cat. 3, 1 pair, for lower link K222 – Ball bushing, Cat. 3, for top link K210 – Ball bushing, Cat. 3/2, 1 pair, for lower link K221 – Ball bushing, Cat. 3/2, for top link K125 – Front power lift, Cat. 2, with bearing control K102 – Top link for front power lift, Cat. 2 H003 – Hydraulic connections, double-acting, 1/1-1/2, rear, DUDK H206 – Hydraulic pump, 220 l/min H063 – Additional valve, double-acting, 1/3, rear, DUDK H141 – 1st valve, front, 1/2" H200 – Power-Beyond H165 – Return line, front H163 – Return line, rear, non-pressurized H087 – Additional valve, double-acting, 1/4, rear, DUDK H122 – Additional valve, double-acting, 1/5, rear, DUDK C072 – Automatic climate control C001 – Paint finish, Nature Green / rims, Terra Red C184 – Cab suspension, comfort, pneumatic C221 – Low beam and high beam headlights, LED C101 – Super comfort seat, Titanium / DL C292 – Immobilizer C146 – Equipment socket C278 – Comfort mirrors + outline marker light C056 – Rear window C166 – Steering wheel C030 – VisioPlus panoramic cab C053 – Segment wiper / 2 wiping fields C259 – Working lights, roof, rear, LED / 2 pairs C211 – Additional lighting, front, LED C314 – LED rotating beacon, left C315 – LED rotating beacon, right C297 – Battery disconnect switch, electric C158 – Camera connections, 4x digital C140 – Connector plug, 3-pin, for equipment socket C145 – Connector plug, 7-pin, for equipment socket C133 – Cooler box C212 – Corner lights, LED C124 – Emergency kit C126 – Fire extinguisher C128 – Interior rear-view mirror C171 – Terminal bracket C306 – Infotainment package C269 – Terminal 12", roof C135 – Universal holder for mobile phone C322 – 4 USB ports, armrest C060 – Windshield and washer, rear C061 – Windshield and washer, side C289 – Work light, hood, top, LED C209 – Working lights, A-pillar + fender, rear, LED C202 – Work lights, roof, front, LED / 2 pairs C207 – Work lights, A-pillar, LED E110 – Contour Assistant E030 – Guidance basic package E044 – RTK NovAtel E116 – TI Headland E082 – Agronomy basic package E107 – Smart Connect E101 – Telemetry basic package E092 – Machine control basic package C257 – Section Control E070 – Variable Rate Control A279 – Registration for 15.0 t permissible total weight A077 – Two-circuit braking system A133 – DL 2-line system for trailer A126 – Parking brake, pneumatic A195 – Mounting bracket for trailer hitch A160 – Automatic trailer hitch, 38 mm pin A197 – Lower attachment for attachments A182 – Ball hitch A113 – Warning device for vehicle width over 3 m F291 – NOT suitable for front loader R928 – Goodwill, 5000 operating hours R949 – 540 / 65 R 38 BKT S251 – 650 / 85 R 42 BKT S455 – Filter package, 5000 operating hours

Condition: used, Year of construction: 2024, Reduced from 50 to 40 km/h, Additional warranty: Full maintenance contract Contract duration: 1+1 years (February 26, 2025 - February 25, 2027) (including statutory warranty) First operating hour: 1,195 hours Last operating hour: 2,500 hours Maximum engine hours: 2,500 hours Maintenance included: 1,500 hours, 2,000 hours, 2,500 hours Selected equipment: Standard hydraulic oil, without tire pressure control system, Air compressor standard, standard cabin filter Factory equipment, previously: C141 – 7-pin trailer socket, standard design V015 – Profi+ Setting 2 L041 – Standard compressor M122 – Emission Stage V M096 – Reversing fan M038 – Heated fuel pre-filter M070 – Standard fuel tank G007 – Planetary rear axle G034 – 50 km/h version G085 – Flange pin 1 3/8" 6-part K028 – 3-point linkage Cat. 2/3 SK without top link K015 – EHR control, hydraulic lift DW / relief valve K039 – Top link SK Cat. 3/2 K220 – Ball bushing Cat. 2 for top link SK K215 – Ball bushing Cat. 3 1 pair for lower link SK K222 – Ball bushing Cat. 3 for top link SK K210 – Ball bushing Cat. 3/2 1 pair for lower link SK K221 – Ball bushing Cat. 3/2 for top link SK K125 – Front hydraulic lift Cat. 2 EW with load sensing K102 – Top link for front hydraulic lift Cat. 2 H003 – Hydraulic connections dw 1/1-1/2 rear DUDK H206 – Hydraulic pump 220 l/min H063 – Additional valve dw 1/3 rear DUDK H141 – 1st valve front 1/2" H200 – Power-Beyond H165 – Return line front H163 – Return line rear, non-pressurized H087 – Additional valve dw 1/4 rear DUDK H122 – Additional valve dw 1/5 rear DUDK C072 – Automatic climate control C001 – Paint color Nature Green / rims Terra Red C184 – Cabin suspension, comfort, pneumatic C221 – Low beam and high beam, LED C101 – SuperComfort seat Titanium / DL C292 – Immobilizer C146 – Tool socket C278 – Comfort mirrors + outline light C056 – Rear window C166 – Steering wheel C030 – Panorama cabin VisioPlus Pgedpo Af Rd Tjfx Ai Tou C053 – Segment wiper / 2 wiping fields C259 – Work lights, roof, rear LED / 2 pairs C211 – Additional lighting, front, LED C314 – LED rotating beacon, left C315 – LED rotating beacon, right C297 – Battery disconnect switch, electric C157 – Camera connections 2x digital, 2x analog C140 – Connection plug 3-pin to tool socket C145 – Connection plug 7-pin to tool socket C133 – Cool box C212 – Corner lights, LED C124 – Emergency kit C126 – Fire extinguisher C128 – Interior mirror, front C171 – Terminal mount C306 – Infotainment package C269 – Terminal 12" roof C135 – Universal holder for mobile phone C322 – 4 USB ports, armrest C060 – Wiper and washer, rear C061 – Wiper and washer, side C289 – Work light, hood, top, LED C209 – Work lights, A-pillar + fender, rear, LED C202 – Work lights, roof, front, LED / 2 pairs C207 – Work lights, A-pillar, LED E110 – Contour Assistant E030 – Guidance basic package E054 – RTK Trimble E116 – TI Headland E082 – Agronomy basic package E107 – Smart Connect E101 – Telemetry basic package E092 – Machine control basic package C257 – Section Control E070 – Variable Rate Control A279 – Approved for 15.0 t permissible total weight A077 – Dual-circuit brake A133 – DL 2-line system for trailer A126 – Parking brake, pneumatic A195 – Mounting bracket for trailer hitch A160 – Automatic trailer hitch, 38 mm bolt A197 – Lower hitch, implements A182 – Drawbar coupling A825 – Front fender, 620 mm wide, 1600 mm long A862 – Fender, vehicle width 3000 mm A113 – Warning device, vehicle width over 3 m F291 – NOT suitable for front loader S251 – 2

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Pgjdpj Afxi Nofx Ai Tou Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: excellent (used), Year of construction: 2009, GDW 350 CNC CNC Lathe GDW 350 CNC with Fanuc Oi Mate Control, Year of Manufacture 2009, in Excellent Original Condition The machine comes from the special production division of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2009 Model: GDW 350 CNC Pedpfx Aoyxfczei Togu TECHNICAL SPECIFICATIONS Swing over bed: 350 mm Swing over cross slide: 190 mm Distance between centers: 400 mm Spindle bore: 58 mm Drive power: 7.5 kW Speed range: 30–6000 rpm Special features: • Linear guides on all axes • Direct position measurement system • Centrally mounted ball screw • Removable chip tray • Excellent chip removal due to slant bed design • High safety standards • State-of-the-art control system • Overload clutches on all feed axes • 8-position disc turret for short tool change times • Washable chip tray About the machine: Offered here is a GDW 350 CNC lathe with Fanuc Oi Mate control, year 2009. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special production tasks. The control system is very user-friendly. The guides are regularly lubricated via the central lubrication system. The GDW 350 CNC has been mechanically and electrically tested at our site. Take advantage of the opportunity to inspect and test the GDW 350 CNC under power at our location. You can find additional lathes from renowned manufacturers on our website.

Condition: used, Year of construction: 2021, Profi-Plus version, Pgjdpfxs Af Nz He Ai Tou Heated fuel pre-filter Pre-heating package Planetary rear axle Engine PTO 540/750/1,000 rpm 50 km/h version EHR control system, external Top link, Cat. 3/2 - 90, hydraulic Front three-point linkage, Cat. 2 Hydraulic pump, 110 ltr./min 4 double-acting control valves, rear, DUDK 2 double-acting control valves, front External hydraulic valve actuation Power Beyond Front return line Rear return line, pressureless Automatic climate control Cab suspension, pneumatic Super comfort seat, air-sprung Rearview mirrors, electrically adjustable, wide-angle mirrors Heated rear window Vario Guide sunroof Rotating beacon, left, LED Rotating beacon, right, LED Additional lighting, front Work lights: roof front, roof front inside, A-pillar, rear fender, roof rear, 2 pairs, corner lights Vario terminal, 10.4" Visio Plus panoramic cab Segment wiper with 2 wiping fields Without immobilizer Floor mat Terminal mount Universal mount for mobile phone Basic package, agronomy Basic package, telemetry Basic package, machine control Basic package, lane guidance Vario Guide Standard Novatel SmartConnect 2-line compressed air supply system for trailer, trailer hitch automatic with 38 mm pin Duomatik coupling Front fenders, pivoting Front tires: 480/65R28 136D Michelin - track: 1,880 mm Rear tires: 480/70R38 145D Michelin - track: 1,800 mm Fendt front loader CARGO 4X/80 DW with 3rd hydraulic circuit.

Condition: refurbished (used), travel distance X-axis: 9,000 mm, table length: 2,800 mm, table width: 8,000 mm, table load: 64,000 kg, TECHNICAL DETAILS Longitudinal travel: 9,000 mm Podpfx Aj Agftioi Tjgu Transverse travel: 2,950 mm Vertical travel: 1,250 + 2,200 mm Rapid traverse rates for longitudinal/transverse/vertical axes: 3 / 3 / 2 m/min Table size: 2,800 × 8,000 mm Table division: 5,000 + 3,000 mm Permissible table load: max. 64,000 kg Spindle speed: 20–600 rpm Spindle motor power: 100 kW Spindle torque: 13,000 Nm Spindle mount: ISO 60 Distance between columns: 3,200 mm Distance from spindle nose to table: 2,806 mm MACHINE DETAILS Overall dimensions: 21,000 × 7,800 × 6,650 mm EQUIPMENT 90° head Compact 90° head Vertical extension Swiveling head 3-stage gearbox

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, HANDTMANN GMD 99-2 | Ground meat portioning machine / Portioning dispenser Pgjdpfsz Ek Tgsx Ai Tsu Manufacturer: Albert Handtmann Maschinenfabrik GmbH & Co. KG Model / Type: GMD 99-2 (Type 99-2) Serial number: 33486 Year of manufacture: 2013 Belt / knife width: 220 mm / 220 mm Working clearance: 250 x 100 mm Overall dimensions: 1390 x 700 x 1230 mm The Handtmann GMD 99-2, a professional ground meat portioning machine (Ground Meat Divider), is an industrial device designed for the precise division of a continuously formed product stream into consistent portions. The machine works directly with Handtmann VF 600 series vacuum fillers (and GD grinding attachments), creating an automatic and efficient portioning system. The machine is used in meat processing plants, butcher shops, and catering and delicatessen facilities that focus on the production of packaged ground meat, cevapcici, burgers, roasts, or vegetable-based products. Thanks to its 220 mm wide knife and precise pneumatic or mechanical cutting system, the machine guarantees high throughput and perfect aesthetics for the finished portion before it is placed on a tray or packaged in a flow wrapper.

Condition: used, Speed Steer Super Deluxe – Grammer driver’s seat MP3 radio Sunroof Rear window wiper and washer Pgodpfx Ais Af Nxys Teu Electrically adjustable, telescoping exterior wide-angle mirrors Mechanical cabin suspension Interior mirror Automatic climate control Datatronic terminal (1 screen) Gateway Telemetry CCLS hydraulics 110 l/min DL 2-circuit 1st + 2nd control valve with MicroJoystick MF Guide with Trimble Centimeter CM Ntrip 540/540E/1000 Fuel pre-filter Front axle suspension Reverse alarm FL quick coupling system Hydraulic top link External battery connections 2 rotating warning lights 4 LED front + 4 LED rear work lights Rear-facing ABS warning light on fender and cabin Rotating front fender Section Control AutoGuide with Trimble Front lift Göppel 2 hydraulic connections to the front Front loader: ALÖ FL 4018 Tires: front: 440/65R28, rear: 540/65R38

Condition: used, Year of construction: 2022, New machine financing possible Standard version Profi Plus Setting 2 RTK activation Engine brake Heated fuel pre-filter Emissions stage V Planetary rear axle 50 km/h version (currently throttled to 40 km/h) Flange stub 1 3/8" 6-piece EHR control EW Three-point linkage Cat. 2/3 Top link SK hydraulic Cat. 3/2 Front three-point linkage Cat. 2 with load sensing and relief Holder for implement relief Front PTO 1000 rpm 5 double-acting control valves rear DUDK 1 double-acting control valve front Non-pressurized return flow Return flow front Hydraulic pump 193 l/min Power Beyond External hydraulic actuation Panoramic VisioPlus cab Segment wiper with 2 wiping fields Pgodj Af Nziopfx Ai Teu Automatic climate control Super comfort seat, air-sprung Emergency package Floor mat Universal holder for mobile phone 12V ABS socket Preparation for EU control unit Device socket Rearview mirrors, electrically adjustable Wide-angle mirrors Camera connection 2 digital, 2 analog Terminal bracket Cab suspension, pneumatic Dipped and main beam LED with range adjustment Additional lighting LED Corner lights LED Work lights: all LED Terminal 12" Terminal 12" in the roof Immobilizer Battery disconnect switch, electric Infotainment package Rotating beacon left, LED 4 USB ports, armrest Basic package Agronomy Basic package Telemetry Basic package Machine control Contour Assistant Basic package Guidance NovAtel RTK dual-circuit brake Overwidth indicator without lighting 2-line compressed air supply system for trailer Trailer coupling, automatic, 38 mm pin Mounting bracket for trailer coupling Lower hitch for implements Tow ball coupling K80 Tires front: 540/65R30 TB Tires rear: 650/65R42 TB

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). Pgedpfx Ajz Hyyfoi Tsu The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. A manual compiled from Deckel descriptions is also included in the scope of delivery.

Condition: used, Year of construction: 2023, New machine financing possible Profi+ Setting 2 Emission Stage V Heated fuel pre-filter Engine brake Planetary rear axle 50 km/h Flange stub 1 3/8" EHR control for hydraulic lift Upper link, SK, hydraulic, Cat. III/II Lower link, Cat. II Podpfx Ao Af Nytji Tsgu PTO 1000 rpm Hydraulic pump 193 l/min 5 double-acting control valves, rear, DUDK Hydraulic valve actuation, external Power Beyond Return line, front Return line, rear, non-pressurized 1 double-acting control valve, front Automatic climate control Rear lights/turn signals, standard NatureGreen/TerraRed Cab suspension, pneumatic Low beam/high beam/headlight leveling, LED Super comfort seat, air-suspended Immobilizer Device socket Rear-view mirror + wide-angle, electric Rear window Steering wheel Panoramic cab VisioPlus Segment wiper / 2 wiping fields Working lights, roof, rear, LED / 2 pairs Additional work lights, front, LED LED working light, left Battery disconnect switch, electric Camera connection, 2 analog, 2 digital Corner lights, LED Emergency kit Floor mat, cab Terminal mount Preparation for roof installation of EC control unit Infotainment package Terminal 12" roof Universal mount for mobile phone Wiper/washer, rear Working lights, roof, front, LED Contour Assistant Guidance basic package NovAtel RTK Agronomy basic package Smart Connect Telemetry basic package Machine control basic package Dual-circuit brake, DL 2-line system for trailer Mounting bracket for trailer coupling Automatic trailer coupling, 38mm pin Base vehicle Lower attachment for implements Drawbar coupling, K80 Tires: front: 600/60R30 162D, track: 1980mm rear: 710/60R42 176D, track: 1960mm

Condition: used, Year of construction: 2023, Fendt 516 Vario Gen3 ProfiPlus, Configuration 2 - Year of manufacture: 10/2023 - Approximately 1,590 operating hours - Top-maintained machine, first owner - Complete service history available in our workshop Pjdj Af N Ayepfx Ai Togu - Service performed at 1,500 hours - Includes front loader - Matching care wheels are available Equipment: - Front three-point linkage with load sensing and pressure relief control - Front PTO - Hydraulic top link - 5x double-acting control valves (DA CV) at the rear - 1x double-acting control valve at the front with return line - 158 l/min hydraulic pump - Pneumatic cabin suspension - Automatic climate control - Infotainment package - Super comfort seat with air suspension - Terminal on the armrest and in the roof - Electric mirrors - Camera connections: 2x digital, 2x analog - Work lights completely in LED - Tail light and turn signals in LED - RTK Novatel guidance system - Contour Assistant - Section Control - Telemetry and agronomy package - Front tires: 540/65 R28 Trelleborg - Rear tires: VF 650/65 R38 Trelleborg Front loader 4X80 DA - 3rd circuit - Damping system - Hydraulic tool locking Delivery is also possible without the front loader; price available upon request. For more pictures and information, please send a short message or call directly. The machine can be viewed by appointment.

Year of construction: 2024, condition: new, functionality: fully functional, Forced-air curing oven Powder coating oven NEW SLS-90/O * D+t Through-feed oven, divisible Working dimensions: 1400 width x 2000 height x 6500 depth Overall dimensions: 1920 width x 2810 height x 6800 depth Power supply: Electric Rated power: 90 kW Voltage: 380V Pjdpfscutrlex Ai Tsgu Frequency: 50-60Hz Door type: 2 doors on each side - through-feed oven Anti-explosion lock Warm-up time: 15-30 min. (180 °C) Homogeneity: < ± 3 °C at 180 °C Max: < ± 3 °C Maximum temperature: 230 °C Transport: optional Air circulation: Forced air Heaters: Interchangeable roof heating panels Airflow: Vertical Fan: Radially mounted on interchangeable panels Door: Double, two doors on two sides (through-feed oven) Divisible Motor power: 1.1 kW Capacity: 6480 L Warranty: 12 months GERMAN-SPEAKING CONTACT PERSONS IN GERMANY FEEL FREE TO INQUIRE Delivery time: approx. 12 to 16 weeks after order Shipping costs are calculated individually. We also offer systems tailored to your requirements. More information at Romer Germany Powder coating, electrostatic painting, Powder Coating, Powder painting, plastic powder, Peinture en poudre, thermoplastic, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування, powder coating booth powder coating system powder coating plant powder coating booth for powder coating surface technology powder gun powder guns curing oven powder coating oven industrial oven INDUSTRIAL OVEN, forced-air curing oven, powder coating oven

Condition: used, Year of construction: 2024, Reduced from 50 to 40 km/h Additional warranty: Full maintenance contract Contract duration: 1+1 years (02/28/2025 - 02/27/2027) (including statutory warranty) First operating hour: 1,072 hours Last operating hour: 2,500 hours Maximum engine hours: 2,500 hours Maintenance included: 1,500 hours, 2,000 hours, 2,500 hours Selected equipment: Standard hydraulic oil, without tire pressure control system, Air compressor standard, standard cabin filter Factory equipment, previously included: C141 – 7-pole trailer socket V015 – Standard version L041 – Profi+ Setting 2 M150 – Standard compressor M122 – Emission stage V M096 – Reversing fan M038 – Heated fuel pre-filter M070 – Standard fuel tank G007 – Planetary rear axle G034 – 50 km/h version G085 – Flange stud 1 3/8" 6-piece K048 – .2/3 SK hydraulic support K015 – EHR control power lift DW / relief K040 – Upper link SK hydraulic. Cat. 3/2 90 K220 – Ball socket Cat. 2 to upper link SK K215 – Ball socket Cat. 3 1 pair to lower link SK K222 – Ball socket Cat. 3 to upper link SK K210 – Ball socket Cat. 3/2 1 pair to lower link SK K221 – Ball socket Cat. 3/2 to upper link SK K125 – Front power lift Cat. 2 EW with bearing control K103 – Upper link for front power lift Cat. 3 H003 – Hydraulic connections dw 1/1-1/2 rear DUDK H206 – Hydraulic pump 220 l/min H063 – Auxiliary valve dw 1/3 rear DUDK H141 – 1st valve front 1/2" H214 – Hydraulic valve control external front H215 – Hydraulic valve control external rear H200 – Power-Beyond H165 – Return line front H163 – Return line rear, non-pressurized H087 – Auxiliary valve dw 1/4 rear DUDK H122 – Auxiliary valve dw 1/5 rear DUDK C072 – Automatic climate control Pgedo Af Rfxopfx Ai Tou C001 – Paint color Nature Green / rims Terra Red C184 – Comfort pneumatic cabin suspension C221 – Low beam and high beam LED C101 – SuperComfort seat Titanium / DL C292 – Immobilizer C146 – Equipment socket C278 – Comfort mirror + outline light C056 – Rear window C166 – Steering wheel C030 – Panoramic cabin VisioPlus C053 – Segment windshield wiper / 2 wiping fields C259 – Work lights roof rear LED / 2 pairs C211 – Additional lighting from LED C314 – LED rotating beacon left C315 – LED rotating beacon right C297 – Battery - disconnect switch electric C113 – Tablet holder C140 – Connection plug 3-pole to equipment socket C145 – Connection plug 7-pole to equipment socket C212 – Corner lights LED C124 – Emergency kit C126 – Fire extinguisher C128 – Interior mirror front C171 – Terminal - mount C306 – Infotainment package C269 – Terminal 12" roof C135 – Universal holder for mobile phone C322 – 4 USB ports armrest C060 – Wiper and washer rear C061 – Wiper and washer side C289 – Work light hood top LED C209 – Work lights A-pillar + fender rear LED C202 – Work lights roof front LED / 2 pairs C207 – Work lights A-pillar LED E110 – Contour Assistant E030 – Lane guidance basic package E054 – RTK Trimble E082 – Agronomy basic package E107 – Smart Connect E101 – Telemetry basic package E092 – Machine control basic package A279 – Registration for 15.0 t permissible total weight A077 – Dual-circuit brakes A133 – DL 2-line system for trailer A126 – Parking brake pneumatic A195 – Mounting bracket for trailer coupling A160 – Automatic trailer coupling 38mm bolt A197 – Lower trailer linkage components A182 – Ball hitch A825 – Front fender 620 mm wide 1600 mm long A878 – Fender for vehicle width 2660 mm A113 – Warning device for vehicle width 3 m F291 – NOT suitable for front loader S251 – Goodwill 5000 h

Condition: like new (used), Year of construction: 2023, DIVISIO 5100 (2023) Machine Type: Automatic Depaneling System Model: DIVISIO 5100 Transport height: 920 mm ± 50 mm Max. transport width: 460 mm Interface: SMEMA, Hermes, Siemens Transfer direction: Left to right or right to left Operating side: Front of the machine Fixed rail: Front of the machine Panel length: 70 to 460 mm Panel width: 50 to 460 mm Panel thickness: 0.5 to 5.0 mm Max. panel weight: 1.5 kg Max. PCB weight: 1.5 kg Component height, spindle-side: 8 mm; partial 18 mm (other height on request) Component height, gripper-side: 40 mm Trays on lane 2: 600 x 400 mm Pgedpsv R D Nlofx Ai Tou Power supply: 400V, 208V 50/60Hz, ±10% Power supply system: 3L + N + PE Fuse protection: 3x C16 A without ELCB Power consumption (without suction): 0.8 kW Air supply: 6 bar Air consumption: 120 Nl/min Machine dimensions (L x W x H): 1200 x 2360 x 2152 mm Weight: 1800 kg (standard equipped) Speed (X, Y): 2000 mm/s Speed (Z): 1500 mm/s Acceleration (X, Y): 20 m/s² Acceleration (Z): 15 m/s² Positioning accuracy: ±0.02 mm (20°C ±1°C) Repeatability: ±0.005 mm (20°C ±1°C) Cutting accuracy: ±0.08 mm (20°C ±1°C) Noise level: < 75 dB(A) (may vary due to material mix of the panel)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36014, mileage: 4,990 km, power: 335 kW (455.47 HP), first registration: 06/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Pjdpoz Hkkujfx Ai Tjgu Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, front guard assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with central locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery main switch, pre-wiring for toll collection system, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Cylindrical container designed as a tipper (tipping angle min. 35°), total volume 15 m³, usable volume approx. 14 m³ sludge compartment, container wall thickness 6 mm, 4 lateral water tanks (each 450 l) made of plastic with a total water capacity of approx. 1800 l, vacuum pump CVS Vacustar 1300, hydraulically driven, transport reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding/unwinding adjustable, HD pump Pratissoli KT30 (80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulically driven HD reel with approx. 50 m HD hose DN 13 and spray gun (with rotary joint), container discharge via free outlet or by pressing with the vacuum pump, bottom flap to be opened upwards hydraulically over the entire cross-section, hydraulic locking of the retaining lugs, sealing of the closing bottom in NBR, one bulkhead in the container, lower and upper suction port with Perrot DN 100 and with pneumatically operated slide valve, sludge compartment level indicator with float and external scale (division per 500 L), sight glass for water tanks, discharge flap made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/discharge, transport reel up/down, lower suction port on/off, upper suction port on/off, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 255179729, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 74 kVA, torque: 525 Nm, controller manufacturer: Mazak, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,050 mm, workpiece weight (max.): 1,500 kg, total height: 3,200 mm, total length: 6,400 mm, total width: 2,600 mm, table width: 630 mm, table length: 630 mm, table load: 1,500 kg, overall weight: 19,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 80, mount diameter: 50 mm, tool length: 500 mm, tool diameter: 420 mm, tool weight: 30,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, TECHNICAL DETAILS Operating condition Condition: fully functional Inspection: possible under power after prior arrangement Table and swivel axis Table design: swivel axis Division of swivel axis: 1/360° Machine dimensions Length: approx. 6,400 mm Width: approx. 2,600 mm Height: approx. 3,200 mm Coolant system Tank volume: approx. 800–900 l Tank length: 1,800 mm Tank width: 800 mm Tank height: 650 mm Pallets Number of pallets: 2 pcs. Pallet dimensions: 630 × 630 mm EQUIPMENT Tool holders External coolant drum filter tank Pgodpfx Asz R A Iboi Tou Renishaw MP10 measuring probe system Grid frame in front of the machine, partially mobile 2 pallets, 630 × 630 mm

Condition: used, Year of construction: 2023, New machine financing possible Profi+ Setting 2 Engine brake Heated fuel pre-filter Emissions Stage V Planetary rear axle 50 km/h flange stub, 1 3/8", 6-piece EHR control for hydraulic lift Top link, cat. III/II, hydraulic Front hydraulic lift, cat. II PTO 1000 rpm 5 double-acting control valves, rear, DUDK Pedpfx Ae Af Nylsi Tegu 2 double-acting control valves, front Return line, rear, non-pressurized Return line, front Hydraulic pump 193 l/min Power Beyond Hydraulic activation, external NatureGreen/TerraRed Panoramic Visioplus cab Segment windshield wiper Rear window Wiper/washer, rear Automatic climate control Super comfort seat, air-suspended Emergency kit Floor mat, cab Universal holder for mobile phone Accessory socket Rear view, wide-angle, electric Camera connection, 2 digital, 2 analog Steering wheel Terminal mount Cab suspension, pneumatic Working lights, roof, LED Additional lights, front, LED Tail light/turn signal, standard Dimming high beam, LED Terminal 12", roof Immobilizer Battery disconnect switch, electric Infotainment package LED working light, left Guidance system, basic package RTK NovAtel Contour Assistant Agronomy, basic package Telemetry, basic package Smart Connect Machine control, basic package Dual-circuit brake Overall width without load DL 2-line system Automatic trailer hitch, 38mm pin Tow ball coupling Mounting bracket for trailer hitch Base vehicle Tires: front: 600/60R30 162D, track width: 1980mm rear: 650/65R42 174D, track width: 1920mm

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Pgjdpfxjzxz Azo Ai Tou Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h - Container table diameter: 720 mm - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine - Installation variant: linear Pgodpsz Dimpjfx Ai Teu - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers to protect against chips and coolant. Spindle head slide: Cast iron design with hydraulic weight compensation, guided by combined roller/plain bearing guides. Machine bed: Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head arbor 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool holder SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic changeover; speed 22–4,000 1/min. Feed drives: Digital AC individual drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Control system / measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Optional: Heidenhain iTNC 530. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Main gearbox / milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides / ball screws pulse central lubrication. Coolant: Internal / external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant / air changeover. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical, via 2 vertical ball screws with separate drives, measuring systems, and CNC axes. Working platform: Moves in the X direction, with CNC control panel; electrically secured door with viewing window. Pick-up station: 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free adjacent slots Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy class 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 positioning slots 22 H7; T-slot spacing 160 mm; centering bushing Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X=5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D touch probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety areas; manually adjustable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Painting: Machine / control cabinet RAL 7035, milling head / spindle head RAL 5021; DD structured paint, semi-gloss, oil and alkali resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on-site; adapter plates for chip / coolant return are not included. Pgjdpfx Aiez Dvyco Tju Coordinate information: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC