Used Testo Differential Pressure Gauge for sale (20,493)

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve Lredszy Dzijpfx Agrot - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: used, functionality: unexamined, Hydraulic workshop press in a single-column design (C-frame). Hydraulic cylinder located at the top with a pressure gauge on the press head, and a robust clamping table mounted on a stand. Folding perforated sheet metal safety guards on both sides, control panel on a support column with emergency stop. Ledpfx Agez A Uniorjrt Residual travel: 1 mm, residual travel time: 49 ms, safety clearance: 98 mm. Location: Homburg (Saar), Germany. Inspection possible by appointment. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, maximum load weight: 26,380 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 10/2003, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2003, Equipment: ABS, 2-axle Meiller steel tipper body VIN: M08551 Chassis/Components: * Air suspension * Jost support legs * Tires: 425/65 R.22,5 * Remaining tire tread: approx. 60% front, 50% rear * 2 x BPW axles with drum brakes * Foldable underrun protection Body: * Steel tipper body / steel chassis * Volume: approx. 24 m³ * Load pressure gauge * Front supports, max 200 bar * Rear discharge chute, 400 mm * Rear tailgate as a hinged flap * Rear tailgate with 2 hook latches (mechanical) Weights: * Gross vehicle weight 33,000 kg * Payload 26,380 kg * Tare weight 6,620 kg Other: * German registration New main inspections/safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing and typographical errors, changes, prior sale, and errors. Subject to change!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Loading vehicles We will gladly assist you in loading your purchased vehicles. Organizing special transports We will gladly assist you in organizing special transports. Ljdpfx Aez Dl Ebjgrjrt Temporary license plates / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling customs formalities We will gladly assist you in handling customs matters.

Condition: used, mileage: 510,158 km, first registration: 01/1993, axle configuration: 4x2, Year of construction: 1993, Equipment: ABS, EBS, air conditioning, power assisted steering, DB SK 1824 K ASSMANN SEWER CLEANER, vacuum and flushing vehicle, as well as a tank vehicle for A3 (diesel and heating oil) • ADR version with emergency stop switches • M-cab • 3-seater • Radio • Telephone • Heated exterior mirrors • 7-speed manual transmission • Sun visor • Differential lock • AP axles • Leaf suspension Lredpfx Agowmzqqsrst • Trailer hitch – ball type, towing capacity: 8,000 kg (braked) • Heated exterior mirrors • 12 R 22.5 tires, in very good condition! • Gross vehicle weight (GVW): 18,000 kg • Unladen weight: 12,270 kg • Payload: 5,730 kg • Overall dimensions of the vehicle: 7,600 x 2,500 x 3,200 mm BODY: ASSMANN Type 8.0 / 235A1, year of manufacture 10/93 • 4 chambers: 1. Chamber 1500L for flushing 2. Chamber 2000L 3. Chamber 4000L 4. Chamber 500L • DEMAG-WITTIG vacuum pump, Type WPS 126 V • WOMA high-pressure pump, Type 252 • The vehicle is additionally equipped with a complete set of fittings for heating oil and diesel, including a meter and pump! It was used for refueling machinery! • All documents, inspection records, and technical drawings are available! • The vehicle is sold in fully functional condition! - German vehicle! - First owner - TÜV/MOT inspection on request and for an additional charge: NEW! Subject to errors and prior sale!

Condition: used, total width: 762 mm, total length: 1,448 mm, total height: 1,800 mm, For sale is a used Capsugel ULTRA 8 II, a semi-automatic capsule filling machine for powders in hard capsules. The machine is suitable for applications in the dietary supplement, pharmaceutical, and powder processing industries. The ULTRA 8 II is a production machine with a stainless steel design in the product and work areas, powder hopper, capsule feeder, rotating processing unit, and separate control cabinet. The machine shown is offered in its current condition and with the existing scope of supply. Technical data: Manufacturer: Capsugel / Lonza Capsugel Model: ULTRA 8 II Machine type: semi-automatic capsule filling machine / capsule filler Filling material: powder Lsdpfx Ajzvmnwsgrsrt Processing: hard capsules; the actually installed capsule or format part must be checked on-site Production capacity: up to approximately 33,000 capsules/hour according to the manufacturer; the actually achievable capacity depends, among other things, on capsule size, product, dosage, format parts, operation, and machine condition. Format ranges specific to the series: depending on the format part, sizes from 000 to 5 are mentioned in comparable offers; the specific scope of supply of this machine must be checked based on the available format/change parts. Dimensions according to the manufacturer: approx. 1,448 × 762 × 1,800 mm (L × W × H) Installation area according to the manufacturer: approx. 1,448 × 762 mm Weight according to the manufacturer: approx. 680 kg Closing system: integrated, horizontal hydraulic closing system; according to the manufacturer, no compressed air is required for the closing process. Drives: variable speed drives for capsule alignment, dosing screw, and rotary table Vacuum: integrated vacuum pump Capsule feeder: large-capacity capsule hopper and automatic ring spinner Format change: "pinned" change parts for quick and reproducible setup Operation/control: digital displays and separate control cabinet Design: stainless steel table top, ring carrier, powder hopper, and enclosure Equipment and visible components: Stainless steel powder hopper Capsule feeder and rotating capsule holder Dosing and filling area Integrated drives and gearboxes Hydraulic assembly with pressure gauge Integrated vacuum unit Separate control cabinet with control, protection, and regulation components Emergency stop switch Stainless steel machine frame and enclosure

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Ledpfxszukkgj Agrort Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm Lredpfezlbqrex Agrot - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for container l...

Condition: like new (used), Year of construction: 2010, Retrofitted: 2026 Ledpfx Asz Alwqjgrsrt Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 8500 x 2500 mmNumber of T slots: 17T slots dimensions: 22 mm Traverses of axis X axis traverse: 8000 mmY axis traverse: 3800 mmZ axis traverse: 1500 mmVertical capacity (VC): 168 / 1668 mmDistance between columns: 3100 mm Milling head Auto-indexing differential head (UAD - 0,02º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871) / Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 35000 kgMachine weight approximate: 79000 KgMachine dimensions approximate: 22700 x 7660 x 6800 mm Accessories Guarding: 2 sliding doors with a new perimetral wire-mesh fenceAutomatic tool changer: ATC-60Chip conveyor: 2longitudinal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Ljdpfszvh Dyox Agrort Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Year of construction: 2021, condition: ready for operation (used), A Takamatsu CNC twin-spindle turning and milling center is available. 1) Turning diameter: 190mm, turning length: 150mm, max. one-sided machining length: 440mm, max. bar diameter main spindle/counter spindle: 51mm/42mm, spindle nose 1/2: A2-6/A2-5, spindle bearing 1/2: 100mm/85mm, main spindle bore 1/2: 52mm/43mm, spindle speed: 5000rpm, tool stations: 2×12, travel X1/X2: 162.5mm/170mm, travel Z1/Z2: 500mm/500mm, travel Y: +/-35mm, travel A: 550mm, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2100mm, weight: approx. 7400kg, control: Fanuc 32i-B. 2) TOP Automazioni FU350SX bar feeder, max. bar capacity: 52mm, max. bar length: 3200mm, max. remnant length: 300mm, max. feed rate: 30m/min, max. bundle weight: 2000kg, machine dimensions X/Y/Z: approx. 4300mm/1400mm/1200mm, weight: approx. 1200kg. 3) LTA E 120-X-2-H filtration system, year of manufacture: 2022, filter stages: 2, extraction capacity: 1200m³/h, blower capacity: 2400m³/h, differential pressure: 840Pa, max. separation efficiency: 99.8%, machine dimensions X/Y/Z: approx. 1150mm/620mm/650mm, weight: approx. 125kg. Documentation available. An on-site inspection is possible. Lrsdpfx Agjzl Enzeret

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central fume extraction system Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62187 Year of construction 2014 Nominal volume flow 3000 m³/h Nominal volume flow 50 m³/sec Filter area 27 m² (9 pieces, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Lrodjz Db Nijpfx Agrjt Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control - Control cabinet mounted on the extraction system - 9 filter cartridges, Type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter replacement - Radial fan installed on the top inside, Type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Firewater connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: new, Year of construction: 2006, functionality: fully functional, New complete set of Weishaupt WKMS 80/3-A ZM industrial heavy oil burner. The set is fully assembled by the manufacturer. All components are original Weishaupt products, matched to each other and designed to work together. The equipment is ready for installation and commissioning. Set contents: 1. Weishaupt WKMS 80/3-A ZM heavy oil burner, 3550-17500 kW 2. W-FM 200 WK Weishaupt control module for modulating burner operation 3. RD 2.5 Hz We17000126 Weishaupt air cooling fan 4. We2704010701-2 Weishaupt rotational speed sensor 5. Combination shut-off valve DN 50 for heavy oil EL and S, with pre-valve We1090000147-2 Weishaupt Lrsdpfoz Alncex Agrst 6. Pressure transducer P 30-w, connection G1/2, 0-16 bar We690389 Weishaupt 7. VLT5072 frequency converter with braking device IP20 We795802 8. Differential pressure transducer in the combustion chamber We030-Ang20297 9. KS 40-108 regulator for burner output control We690345 10. LGW50 A2, 2.5-50 mbar air pressure relay We691371 11. VLT 5072 IP20 braking resistor We795803 12. Special version of the W-FM 200 combustion manager We27000498 13. Fan station No. PLT- P4M-N5B2X/N, 24000 m³/h, 45 mbar 14. SPZ 40-46 pump station with two pumps for heavy oil S4860 We17000490 15. WEV3/01 heavy oil preheating station, 1500 kg/h, 3 pcs We17000225 16. WK 80 ZM 80 ZM fabric expansion joint We27000533 17. WKMS80/3-A burner control cabinet with W-FM200 We30-Ws/SO-ang20297187 18. Noise silencer for ventilation station WEISHAUPT. Condition: * Year of manufacture - 2006; * Equipment is new; * Has been stored for a long time in a dry, closed warehouse; * Complete set; * Complete set of accompanying documentation is available.

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Lrsdpfezvz Tbjx Agrot Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Lrjdozzpb Rspfx Agret Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: new, Year of construction: 2026, pressing force: 80 t, stroke length: 400 mm, clearance between the columns: 1,000 mm, Equipment: documentation/manual, - Capacity: 80 tons - Cylinder stroke: 400 mm - Working width: 1000 mm - Electrically or manually operated - Pressure gauge - Emergency stop - 400V Lredpfx Aoz Alrzogrot

Condition: excellent (used), functionality: fully functional, 1 x Cintex Ferrous-in-Foil metal detector mounted on a conveyor belt with retractable belt system into a lockable bin. This metal detector meets full retail specification. Manufacturer – Cintex. Ljdpfxoyn N Rms Agrjrt Model – Sentry. Aperture dimensions - 370mm wide x 105mm high (clearance). Belt dimensions - 300mm wide x 1500mm long. Direction - runs Right to Left. Electrical requirements – 230 V / 50 hz / 1 phase. Full retail specification, features - reject confirmation, reject bin full monitoring, low-air monitoring, electronically lockable bin with bin door open monitoring, backup PEC. Upgraded from an Autosearch 2 and fitted with new conveyor belts, new pressure gauge, received PLC program adjustment and received a full service.

Condition: used, bottom outlet NW 50 pressure gauge with outlet Optional: various fittings Lodpfx Agoz Ar Txorert

Condition: used, functionality: fully functional, machine/vehicle number: 109116063, Paolo Orizio S.p.A. single-sided circular knitting machine, model JSV-R, machine number 109116063. Made in Italy. MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1856 · Number of feeders: 44 · Cylinder number: 22101088 · Needles: VO 12362 G02 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION: Single-sided knit fabrics: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Orizio control panel with counter and pre-selection · Labeled indicator light panel · IG455 tachometer · UNIWAVE mist lubricator with pressure gauge and regulator · Drive with stepped pulleys · Complete upper fileta · Hour meter LUBRICATION: Oils specified on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION: Complete and assembled machine. A visit can be arranged for inspection and on-site operating test. Lredjzvm Ukepfx Agret DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Lrjdpjzz Sdzefx Agrot Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Lrodpfx Agezgua Aerst Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Article number: Bending machine KS & HT.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with Ledewxdctjpfx Agrort 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: used, Year of construction: 2020, operating hours: 87 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 2 A, Equipment: type plate available, Used FINIMAC blasting cabinet/shot blasting machine for sale, model V1, manufactured in 2020 (serial number 2733), by FINIMAC (Vittuone, Milan, Italy). Second-hand equipment, with very little use – the internal counter registers approximately 87 operating hours. Cabinet with inspection window, two work gloves for handling parts, control pedal, pressure gauge, and its own control panel (main switch, emergency stop button, and hour counter). 400V three-phase power supply. Internal identification "M63". Condition: used equipment (not new/factory), functions normally, tested and operational. Lsdpfx Agezvdfmjrert

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres Lrodpfxezp Rmqj Agret - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: good (used), Year of construction: 2014, mast type: telescopic, fuel type: diesel, Weights Empty weight: 6.600 kg Functional Lifting capacity: 230 kg Working height: 1.570 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1250 m Max swing of platform in degrees: 360 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: H16TPX Year of build: 2014 Condition: Used Lrsdpfx Ajy Ny T Aegrst Data: Max. working height: 15,70 m Max. platform height: 13,70 m Max. reach: 12,50 m Drive type: Diesel Total dimensions LxWxH: 8,40 x 2,26 x 2,24 m Length of transport position: 6,60 m Height transport position: 2,50 m Track widening: 0 m Platform dimensions LxW: 1,81 x 0,78 m Max. basket load: 230 kg Swivel range: 360° Overhang: 0,88 m Movable up to working height: 15,70 m Max. gradeability: 50% Wheel pressure (Support pressure): 41 kN Ground clearance: 0,25 m Empty weight: 6.600 kg Special features: Rotatable work basket, basket arm/vertical swivel angle 140°, all-wheel drive, differential lock, permanently installed particulate filter. Information: Location: 97828 Marktheidenfeld immediately available

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 400 V, stroke length: 300 mm, operating speed: 90 mm/s, throat depth: 1,000 mm, total length: 4,540 mm, total width: 1,900 mm, total height: 2,950 mm, overall weight: 16,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 4,520 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, distance between stands: 3,200 mm, installation height: 950 mm, control type: CNC control, back gauge adjustment: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, SafanDarley press brakes are innovative and highly efficient machines on the market, designed for sheet metal processing by the Dutch manufacturer. The precision of bending and reliability have been recognized by users in Poland and worldwide. SAFAN E-Brake is a series of machines equipped with an electric drive, which has been successfully used in our machines for almost 30 years. Currently, the largest model of press brakes with an electric drive is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servo motors, controlled by long-life frequency inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to the innovative drive, the machine consumes electrical energy primarily during the downward movement of the slide and the bending process. The slide returns using the force generated by springs mounted on both sides of the machine. Even when idle, the machine virtually does not consume electrical energy, as the system does not have a hydraulic pump motor to maintain pressure, as in hydraulic press brakes. We estimate that the electrical energy consumption is up to 70% lower than in conventional hydraulic press brakes. In addition, the electric drive is insensitive to temperature differences that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-310 model 2009 - Capacity: 150 tons - Bending length: 3060mm - Controller: Safan E-Control - Bending system in 2D mode - 17” color AcuTouch touchscreen monitor - Service panel on a movable arm Lodox Ewnpjpfx Agrsrt - Y1/Y2 axis controlled by CNC Back gauge: - X1-X2 axis controlled by CNC - R1-R2 axis controlled by CNC - Z1+Z2 axis controlled by CNC - Upper tool adapter Wila (hydraulic clamp) - Lower tool adapters Wila (hydraulic clamp) - Lightguard safety system with the option to control the upper beam descent - Work area lighting at the front and rear of the machine - Electrical installation 3/N/PE 50 Hz 400/230 V - Opening: 690mm - Distance between machine frames: 3300mm - Machine dimensions (L x W x H): 4450x2120x2900 - Weight: 16,500kg