Used Trio-Technik Separator With Disk for sale (12,909)

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 1,029 mm, Total weight: 2,600 kg, high-loader, open box, overrun braked, rear tipper with hand pump. Errors and prior sale excepted. Isdpfx Aoym Ig Dsn Hjif

Condition: used, maximum load weight: 930 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2023, loading space length: 2,300 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,560 mm, total height: 895 mm, Gross vehicle weight: 1,300 kg, high loader trailer, with overrun brake, 100 km/h, rear tipper, equipped with BAST-Ing PumpFast cordless drill pump. Errors and prior sale excepted. Iiodpfoym Ig Rjx An Hsf

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches * Folding front wall * Loading height 550 mm Isdpfxsym Ihhs An Hsif Errors and prior sale reserved

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner granulators in the C’s series (“C” stands for “compact,” “s” for “silent,” i.e., noise-optimized) offer practical solutions for virtually all challenges associated with the in-line recycling of sprues and rejected parts during the production process. Thanks to their modular design, the C’s series granulators can be easily adapted to specific applications or operational requirements. Depending on the method of sprue feeding, the discharge of regrind, or the specific injection molding machine being used, the Wanner C’s series offers optimal solutions tailored to your workflow through a wide range of standard components. Optimized cutting geometry and low rotor speeds ensure high-quality regrind with minimal dust content, while sound-insulated feed hoppers and a grinding chamber design optimized to minimize structure-borne noise and vibration contribute to low noise levels. The generously sized gearbox ensures a long service life for the granulators while also allowing for extremely compact dimensions. The grinding chamber can be opened quickly and easily—saving time and costs, for example, during cleaning for color or material changes. Advantages of the C’s Series Easy adaptation to specific applications via a modular system Compact design requires minimal floor space next to the injection molding machine Solid cast/steel housing mounted on swivel casters Robust motor/gearbox unit for long service life Significantly reduced noise levels thanks to a staggered-cut rotor and a grinding chamber design optimized for vibration control. Easy operation and cleaning of the mill save time and costs Improved intake of bulky sprues and regrind parts due to optimal rotor geometry Grinding chamber with hardened inserts for minimal wear when processing glass-fiber reinforced material High-quality, low-dust regrind achieved through optimized cutting geometry. The co-rotating disc in the side wall reduces friction, thereby minimizing heat buildup and material degradation. Blades easily resharpened without special fixtures Sound-insulated feed hoppers with safety guards Technical Data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20–25 kg/h Screen perforation: 3–8 mm Voltage: 400 V / 50 Hz Collection bin volume: approx. 6 l Suitable for glass-fiber reinforced material (standard) Iijdpfx Anozc Nydo Hef Control system: Contactor control with overload protection switch Electrically redundant design with self-monitoring safety relay compliant with EN 12012 5 m power cable Weight: 155 kg Year of manufacture: 04/2019 Product video "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Used Trio TTCW 3618 Coarse Material Logwasher Year 2007 Twin Shaft c/w 30 HP Electric Motor / Gearbox Iisdpoy U Nd Iofx An Hef Each Shaft Measures 36" x 18ft Long Fitted With All New Wear Parts Shotblasted, Primed & Painted

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) Iijdpfx Aont Uc Ron Hsf We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: KT 615-7, pressure: 15 bar, power: 1,700 kW (2,311.35 HP), temperature: 325 °C, rotational speed (min.): 7,673 rpm, Steam turbine M+M Turbinen-Technik – 1.7 MW Industrial top quality For sale: Complete, high-quality industrial steam turbine installation from the renowned German brand M+M Turbinen-Technik GmbH. The steam turbine has already been dismantled by a specialized company. All necessary documents, manuals, diagrams, etc., are complete and available. Key specifications: Type: KT 615-7 Power: 1700 kW (1.7 MW) Year of construction: 2009 Speed: 7673 rpm Inlet pressure: 15 bar (abs) Outlet pressure: 0.1 bar (abs) Inlet temperature: 325 °C Description: This robust steam turbine is built according to German quality standards and guarantees high efficiency and a long service life. The installation is complete with control and measuring systems, valves, and piping, and was used in an industrial environment. The turbine is currently dismantled/disassembled in preparation (as shown in the photos), which simplifies transport and reinstallation. Ideal for reuse in a new installation or as an expansion of existing capacity. Advantages: Iiodpfx Anezbkgie Hjf Reliable and proven technology Compact and powerful output (1.7 MW) Complete system (including control equipment) German top quality Suitable for various industrial applications Applications: Combined heat and power (CHP) Industrial power supply Waste heat recovery Process industry 📩 Interested or would you like more information? Please feel free to contact us for technical details, a viewing, or a customized quote.

Condition: good (used), Year of construction: 2015, 377 USED HB-TECHNIK - External/Internal Flour Silos. Year of manufacture: 2015. EXTERNAL DIMENSIONS (in cm): - External silo: 24-25 tons capacity, dimensions: 290x290 cm, height: 850, - Internal silo: 2 x 4 tons, dimensions: 210 x 155 cm, height: 320, - Internal silo: 1 x 2 tons, dimensions: 100x150 cm, height: 320. EQUIPMENT: - Stainless steel tanks and piping, - 2 flour discharge stations, - Water cooler (for ice-cold water) and water dosing, - Flour dust collector, - Control panel, - Documentation. IMPORTANT: The silos' capacity can be increased to approximately 6-7 tons each. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Iedpjy Sgv Njfx An Heif Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Iiedpfxszcvx Ts An Hof Laser on time: approx. 45,500 hours Includes Loadmaster.

Condition: new, Machine type: Vacuum dough divider Model: VD 100-700 Isdpfx Aouuclpjn Heif The dough dividing machine is the latest system of dough processing technology Cut the dough to the required weight without pressing and damaging it All surfaces that come in contact with the test are made of stainless steel Weight range: from 100gr to 700gr Capacity: 1800 - 2400 pieces per hour Dimensions: 1370/1780 x 650 x 1600 mm Weight: 420kg Electrical power: 1.75kW

Condition: new, Intermediate dough chamber Intermediate chamber for resting (rising) the test after its shaping They are characterized by high-quality workmanship and maximum reliability Also, all models are mobile Rest time: 4.5 minutes Capacity: 1800 - 2000 pcs / h Number of vessels: 154 Iijdpfx Aneuufr Ss Hjf Container capacity: 100 - 1500 gr Dimensions: 1700 x 950 x 2200 mm Dough inlet height: 930 ± 20 Dough outlet height: 1050 ± 100 Electrical power: 0.55 kW Machine weight: 500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands Ijdju Hz Tqjpfx An Hoif

Year of construction: 2008, condition: used, overall weight: 30 kg, terms of delivery: FCA Pegnitz delivery time: on request Iiodpowyfm Asfx An Hef terms of payment: 100% prior to delivery

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Iiedpfxjir E E Es An Hef Motor 37kW 115 rpm Incl. Sampling unit specicon

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Manufacturer: Wanner Technik GmbH Iiedpjyz U Ekefx An Hsf Type: 13.20 Grinding chamber dimensions: 130 x 200 mm Power: 2.2 kW Cascade knife arrangement New knives!!!

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit. Iiodpeyzt Nzefx An Hof

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN Ijdsvkkifjpfx An Heif POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST, WE CAN DO IT WITH ADDITIONAL OFFER

Condition: excellent (used), Year of construction: 2001, operating hours: 24,000 h, functionality: fully functional, WE OFFER AN VERY NICE CONDITION TRUMATIC 5000R PUNCHING MACHINE WITH COMPLETE AUTOMATION MACHINE WILL BE AWAILIBLE IMEDIATELY Iiodpfxsvuld Ee An Hof

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Ijdpfxeuzv Tzs An Hsif Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Rotor blade, 200 x 73.5 x 15 mm 7 pieces available Price per piece: 60 EUR Price for all 7 pieces: 350 EUR Iiedpozakrcofx An Hef

Condition: used, functionality: unexamined, Complete Sand Wash Plant (Trio / Siltbuster) Iijdpfxoy Drtke An Hef Complete sand wash plant to include: Lamela Siltbusters Trio log washer Trio sand washer Trio shaker 700kva generator All assoicated pumps, conveyors, tanks, power packs, framework. Note - partially decommissioned for potential relocation.

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Iisdpou Ibzkefx An Hsf Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories *

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t Iiodpfx Aewivn Nen Hof machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Iijdpfeu N At Rox An Hjf Last calibration was at 06/2006. *

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Iisdjwnrt Sepfx An Hsf Additional bending mandrels without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel