Used Tt - 157E for sale (4,195)

Condition: new, Year of construction: 2026, planing width 30-260 mm Giodsy Ehztepfx Ah Ajw planing height 10-200 mm number of spindles 6 Weight 6650 kg

Condition: good (used), Year of construction: 2009, I sell the widebelt sanding machine Costa SA1 TT 1350, year 2009. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad 1pc. cleaning unit. Working width 1350mm Bands 1380x2620mm Pressure rollers for short elements. Air-blow on both units. End brushing unit with dust extraction. Gedpfx Ajvxlg Ijh Asiw Total weight 3400kg Designed for the line, with fixed working height and moving aggregates. 2 motors, total power 31 kW Including documentation. Condition very good. Available immediately.

Condition: excellent (used), operating hours: 2,333 h, functionality: fully functional, machine/vehicle number: TJLU9012, TT1100G, 2021 – only 2,333 operating hours. Technically well maintained. Price: negotiable. On-site viewing by appointment possible. Sold from location. If interested or for more photos/details please contact. Gedpfxjyzzrdj Ah Aeiw

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,950 mm, construction height: 300 mm, lifting height: 1,650 mm, load capacity: 1,500 kg, overall weight: 450 kg, total length: 2,500 mm, total width: 800 mm, table width: 800 mm, table height: 1,950 mm, table length: 2,500 mm, transport length: 2,500 mm, transport width: 1,200 mm, platform width: 1,200 mm, platform length: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 1,950 mm, space requirement width: 1,200 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, Technical description with the following main data: Load capacity 1500 kg static line load effective stroke 1650 mm Overall height 300 mm Total height 1950 mm Platform length 2500 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 35 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Gijdpfxjuhphvs Ah Ajw Sealing degree IP 54 general, solenoid valve and switch IP 65 Paintwork dust gray RAL 7037 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 450 kg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 25,585 h, spindle speed (max.): 7,000 rpm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B, This SPINNER TTS 42 Lathe was manufactured in the year 2020 in Germany and has 25585 production hours. It is equipped with a Fanuc Series 31i-MODEL B control unit. The machine has a spindle speed of 7000 rpm. See tech specs file as PDF (German) attached for more details. Machine Benefits • main spindle was replaced 2023 • maintained internally • runs on emulsion • no fire extinguishing Qualitative Machine Benefits • Unimag interface for bar loading magazines • Parts conveyor belt • Spinner bar loading machine type servo. Make spinner, for spindles up to 42mm passage, for material d=4-42mm, length up to 3,200 mm • 10x external turning holder • 12x boring bar holders d=32 • 3x recessed boring bar holders • 6x straight agw • 3x axial agw • Material processed so far: aluminum, brass Technical Machine Benefits Gedpfx Aheyail Uj Ajiw • Spindle 2 (counter spindle) in version up to 7,000 rpm - 42mm • Revolver 1 : 12-fold with cnc servo drive revolver 2 : 12-speed with cnc servo drive revolver 3 : 12-speed with cnc servo drive dmjgmx • Ejector unit integrated in counter spindle for ejecting parts into the parts catcher • Signal lamp on top of machine in three colors red/yellow/green as status display • Late conveyor as hinged belt conveyor exiting to the right, incl. Integrated coolant tank and return pump • Coolant system as additional tank incl. Submersible pump 80l/4bar, high-pressure pump up to 80bar / 19. 5l/min • Flushing gun in the work area • Holder for messtaster on the machine bed as preparation for the use of a • Messtaster for tool measurement switching in 3 axes. • Extraction d=200 to the working area for connection to extraction system

Condition: excellent (used), Independent Machine, Top machine Max working width mm 1350 Working height (thickness) mm 3 - 130 Built-in electric and command panel Electronic Programmer PCM (software Costa Sanding Manager) Feeding speed (adjustable) 4 - 24 m/min No. 1 Vacuum unit (power Kw 11) Pressure "shoes" to allow the process of short workpieces Air blowers on the abrasive papers Total power installed KW 69 No. 7 Working groups: 1°) Cross belt TR7, pad with No. 84 sectors (TPR16) (Kw 15, with inverter) 3-16 m/sec 2°) Cross unit XLS (for trimming), with N° 122 abrasive elements (Kw 1,5, with inverter) 3°) Longitudinal unit FTR-3, roller (diam. mm 330) Kw 2,2 with inverter, 40 Sh (3-20 m/sec) 4°) Longitudinal belt TP16, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec Giedpfx Aegx Hnhjh Ajw 5°) Longitudinal belt TP16 Super-finisher SF/3250, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 6°) Scotch-Brite SB180 (Kw 1,5) diam. mm 180 7°) Rotary air-jet blowers for the panels cleaning SR

Year of construction: 2024, condition: like new (used), functionality: fully functional, cable length: 3,550,000 mm, High Voltage Cable – Nexans AXLJ TT 36 kV 1x630/35 We currently have 9 cable drums available of the following high-voltage cable: Type: Nexans AXLJ TT 36 kV 1x630/35 Voltage rating: 36 kV (Uo/U 19/33 kV) Conductor: Round stranded aluminium conductor, 630 mm² Screen: Copper wire screen 35 mm² Insulation: XLPE (PEX) Outer sheath: Polyethylene (PE), black Halogen-free: Yes Water protection: Longitudinal and radial water-tight design Manufactured according to Swedish standard SS 424 14 16 and harmonized with HD 620 requirements Standard: SS 424 14 16, IEC 60228, IEC 60502-2, Gjdsyutddopfx Ah Ajiw Outer diameter: approx. 59 mm Weight: approx. 360 kg per 100 m Available lengths: 5 drums × 350 meters 4 drums × 400 meters Total available length: 3,350 meters. This is a single-core high-voltage cable designed for 36 kV distribution systems, featuring XLPE insulation, copper wire screen and PE outer sheath, suitable for underground installation and demanding power distribution applications. Unit price: 18 EUR/m (net, excl. VAT) Cable drum: Included in the price.

Condition: excellent (used), Year of construction: 2010, Tool-Temp Type: TT-180 Gijdpfxeyzg Svo Ah Ajw Year of manufacture: 2010

Condition: excellent (used), Year of construction: 2015, Tool-Temp Type: TT-181 Year of manufacture: 2015 Gsdpeyzg E Nofx Ah Asiw Connected load: 9.85 kW Weight: 55 kg

Condition: good (used), Year of construction: 2005, Tool-Temp TT-162 H, year of manufacture approx. 2005, oil Gisdsyzga Topfx Ah Asw

Condition: excellent (used), Year of construction: 2014, Tool-Temp TT-180C Giodpfx Asyzf Uvjh Asw Year of manufacture: 2014 Connected load: 9.85 kW Weight: 55 kg

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 Gjdpjy Tyg Defx Ah Aeiw PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft Gisdpfx Ahey Tyg Rs Ajw mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 60 l, axle configuration: 4x4, emission class: euro2, Year of construction: 2025, Equipment: all wheel drive, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 3,908cc Torque: 257 Nm @ 1400 rpm Dimension: 3,660 X 2,010 X2,400 Gearbox type: 8F + 2R partially synchromesh No. of cylinders / aspiration: 4 / naturally Capacity (cm³): 3,908 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 54.7/75 Max. torque (gross) (Nm@rpm): 257 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 1.03 Optional without creeper (F+R) 12+3 Speed range (kph) 2.14 - 31.85 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Gisdoy Tyc Sepfx Ah Ajw Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1500 Maximum lift capacity at ball ends with assist arms (kg) 2000 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3275/4200 = More information = Number of cylinders: 4 GVW: 2.700 kg Wheelbase: 216 cm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4960x1900x1700 mm Weight 5600 kg Total power requirement 47,25 kw Gsdpfsv A Hq Njx Ah Asiw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5380x1860x1760 mm Gsdpov A Hrysfx Ah Ajiw Weight 6050 kg Total power requirement 54,75 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4960x1900x1700 mm Gijdev Ucirjpfx Ah Aow Total power requirement 0 kW Weight 6000 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4960x1900x1700 mm Total power requirement 0 kW Gjdpfx Ajv Uchnoh Aeiw Weight 6000 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5250x1930x1860 mm Weight 6650 kg Giodpjv A Hrgofx Ah Asw Total power requirement 71,68 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x2280x2090 mm Gjdpjv A Hrmjfx Ah Aoiw Weight 9600 kg Total power requirement 84 kw

Condition: like new (used), Year of construction: 2022, operating hours: 2,085 h, turning diameter: 240 mm, spindle motor power: 11,000 W, spindle speed (min.): 3,200 rpm, spindle bore: 90 mm, travel distance X-axis: 142 mm, travel distance Z-axis: 165 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 2,500 rpm, type of input current: three-phase, total height: 2,700 mm, total length: 3,590 mm, total width: 2,610 mm, overall weight: 5,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, Front set Double SPindel Turning Center. with 2 spindle, 2 rew.head, with DRIVEN tools, and C axis, 2 linear robots. Machine is almost new, we used only 2000 hrs. This is the FULL-FULL version of the machine, with two side feeders. collet + 3 jaw chucks. Chain conveyor. FANUC 0ITD control. machine bought new from Takisawa dealer in Hungary. ( SZIMKER ZRT ) RAKU-RAKU MONITOR. Gjdperzq N Usfx Ah Ajiw

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Giodpfx Aheywzq Sj Ajw Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: used, functionality: fully functional, Hydraulic Guillotine TAGLIABUE TT-800 Specification: • Condition – used, after complete overhaul • Manufacturer – TAGLIABUE • Model – TT-800 • Max working width – 800 mm • Max working height – 44 mm • Main motor power – 3.0 kW • Start-up 0-1 • Blade length – 80 cm Godpfxoyy R Ure Ah Asiw • Table size – 50 x 100 cm • Weight – approx. 1,000 kg • Overall dimensions – 150 x 50 x 140 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The pictures show the actual condition of the item for sale • Possibility to start and test the machine on site • Free training on machine operation (at our company headquarters) • The auction price does not include VAT or transport costs Financing and transport: • We organize transport with our MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or lease loan

Condition: new, width of the strips 100 mm band length 1250 mm tube diameter 16,5 - 90 mm angle adjustable from - to 0 - 65 Grad connected load frequency 400 V Gisdpfx Aot Eagrjh Ajw total power requirement 2,2 kW weight of the machine ca. 0,18 t dimensions of the machine ca. 1,2 x 0,6 x 1,3 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Documentation (English)

Condition: new, Tubend TT 90 pipe grinding machine Tube grinding machine Incl. 10 pieces. Grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 49.5 - 57.5 - 73.5 mm Incl. 6 sanding belts Belt width 100 mm Belt length 1250 mm Pipe diameter 16.5 - 90 mm Angle adjustable from - to 0 - 65 degrees Supply voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.18 t Space requirement approx. 1.2 x 0.6 x 1.3 m Pipe clamping range 90 mm Documentation (English) Gjdpfot Sumaox Ah Aoiw