Used Turntable Tilting Table Manipulator for sale (18,864)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Psdpoykub Aofx Ag Djpr Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: new, Year of construction: 2025, table diameter: 1,000 mm, – Horizontal capacity: 1200 kg – Vertical load capacity: 600 kg Psdpfjliftnox Ag Depr – Table size: 1000 mm – Electrically tiltable – Cable remote control – Digital display – Documentation – 400V

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. Psdeh Hfldepfx Ag Djpr All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2026, overall weight: 1,350 kg, Top quality 3D perforated table 3000 x 1500 x 200 mm, 100 mm grid, plate thickness 20 mm, hole diameter 28 mm, surface machined, very robust, weight approx. 950 kg With table legs, height adjustable in 6 steps Price without accessories, surcharge €500 Packed in wooden crate, shipping upon request Pjdpfxsx Nihie Ag Dspr

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-Axis Rotation and Tilting Positioner – 500, 1000, 2000, 3000 kg Load Capacity, Clamping Plate Diameter 0.5, 0.65, 0.8, 1.0 meters HDL 500: - Minimum height: 1000 mm - Maximum height: 1500 mm - Clamping plate diameter: 500 mm - Reach radius: 800 mm (cantilever) - Speed: 0.1 – 1 rpm These positioners have proven themselves in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. They are suitable for welding, assembly, machining, and more. With their stable and robust construction, flexible three-axis positioning (including overhead), and easy operation, they facilitate welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal positioning of the workpiece improves welding quality and enables higher deposition rates - Enhanced safety by significantly reducing dangerous crane handling - Simultaneous positioning along up to three axes without cumbersome re-clamping - Easy and ergonomic operation protects and relieves the operator - Flexibility thanks to modular adaptability and custom configurations Basic Principle: Due to the arrangement of the swivel arm rotation axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines are significantly more powerful than tilt rotary tables or tilt-rotational positioners. This principle allows handling of the specified loads in any position. Thanks to the endless rotation of two axes and additional height adjustment, all workpiece positions (including overhead) are possible. Ppsdpfx Ageulaxbo Dsr Table rotation speed is continuously adjustable from 0.1 to 1.0 rpm; from 2000 kg load capacity, 0.05 to 0.6 rpm. Supplied with wireless remote control. - Rotation range: 360° continuous - Swivel range: 360° continuous - Lift: 1000 – 1500 mm; from 2 tons load capacity: 1250 – 2000 mm - Arm outreach up to 1000 kg: 1 meter; from 2000 kg: 1.5 meters

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, 3-axis welding positioner, 2-ton load capacity, in good condition Incl. hand remote control (foot control available on request) Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Podpfx Aeyupgzeg Djpr Clamping plate diameter: 1.0 meter Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m

Condition: good (used), Year of construction: 1978, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, cutting width (max.): 800 mm, saw blade bore: 30 mm, actuation type: manual, total length: 2,800 mm, Equipment: saw blade guard, Panel Saw / Table Saw / Circular Saw / Joiner's Saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1978 Sliding table length: 280 cm Ripping width/Parallel fence approx.: 80 cm Parallelogram safety guard with top-mounted extraction hood Extension table with crosscut fence Miter fence Motor power: 5.5 kW Condition: see pictures and please pay attention to the item description. Parts can also be picked up by the buyer. All dimensions are approximate. All information provided to the best of our knowledge, but without guarantee. Subject to prior sale. Articles can be picked up by the buyer or shipping can be arranged at the buyer's expense. The stated shipping costs are a guideline price; they may vary depending on distance and unloading possibilities. Please inquire. Psdpsy Aht Dsfx Ag Djpr The offered item is subject to differential taxation. The indicated sales price is the gross final amount. An invoice with VAT shown separately will not be issued. You will receive an invoice according to §25 UStG. Warranty basis: Due to wear and tear on used parts, the items are fundamentally sold as defective – for spare parts only and only to commercial buyers. By placing a bid, the buyer accepts this as the basis of the sales contract. If the offered item is a used article, warranty is 12 months when the buyer is a consumer in terms of §13 BGB. If the buyer is a business customer in terms of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months for consumers according to §13 BGB. For business customers (§14 BGB), the warranty is 12 months. Notice regarding the online dispute resolution (ODR) platform.

Condition: excellent (used), advand TAT-48 rotating table Podpfx Agevl Sk To Dopr Foroat 115 cm x 120 cm Top condition

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot Psdpfxerxcu Sj Ag Depr - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: as good as new (ex-display), Year of construction: 2023, Motorized height adjustable tilt and turn table Maximum load: 500kg Faceplate diameter: 600mm Stroke: 600m Operation: Foot switch and push button on control cabinet Podpfod H I Nfex Ag Djpr

Year of construction: 2022, condition: new, Turntable Load: 1.000kg (1.200kg horizontal) with a center of gravity of 200mm from the faceplate Faceplate diameter: 800mm with 4 T-slots Ppedpfx Agegn Ecre Der Faceplate speed: 0.05-1.5rtm Torque face plate: 1,800Nm Tilt angle: 0-135 ° Welding current transmission: 800A Operation: Two-pedal foot switch and button on the switch cabinet

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg Podpfjgbt Sqex Ag Dopr surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Condition: ready for operation (used), Table size: 130 x 265 mm Table height: 180 mm Podsyv D Drepfx Ag Depr

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OT-3022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 3000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist Ppsdpfx Aget E Sdvo Dsr - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg Load Capacity Welding Positioner, CE Certificate Load capacity horizontal: 1200 kg Load capacity tilted: 1200 kg with a load center at 250 mm Very robust Continuously adjustable speed from 0.05 to 0.7 rpm (higher speeds available at extra conversion cost) Turntable diameter: 1200 mm Tilting up to 120° Height horizontal: 1,050 mm, tilted up to center: 880 mm Hand and foot remote control Dimensions: 1.35 m (length) x 1.2 m (width) Chuck or quick-change chuck available for extra charge, depending on size As shown, diameter 1000 mm, price: €2,900 (special price, only available when purchased with the welding positioner) Ppsdpjxq S Niefx Ag Dor Counter bearing with steps: €480, counter bearing with screw adjustment: €880; load capacity 4000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, borehole diameter: 28 mm Includes wireless remote control Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Pedpex Thyrsfx Ag Depr Motor power: 0.75 kW We offer tables in various sizes and load capacities: - Load capacity 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic

Condition: new, Year of construction: 2025, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Pedpjx Thvyofx Ag Dspr Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: new, Year of construction: 2023, overall weight: 675 kg, load capacity: 500 kg, This is a turntable with two axes for industrial robots of the KUKA brand Psdpfx Agjrupi Re Dspr

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 662 kg, load capacity: 500 kg, This is a turntable with two axes for ABB brand industrial robots Podpsrupkcsfx Ag Depr

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Ppjdpfjyupl Dex Ag Dor Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, SEVERT Double-Column Positioner S 40.1-1HH, 2 complete sets available with full documentation For welding or assembly applications Can also be used as a single column elevation and rotation unit (mono configuration) Total load capacity: 2000 daN Load capacity per column: 1000 daN Podpeyupkyjfx Ag Dspr Torque of clamping plate 1: 1400 Nm Clamping plate 2: free rotation without drive Clamping plate rotational speed: 2.0 min⁻¹ Clamping plate 1 dimensions: W1070 x H720 x D30 mm, Part No. 20452-001 Clamping plate 2 dimensions: W1070 x H720 x D30 mm, Part No. 20453-001 Vertical stroke: 680 mm Lifting speed: 2200 mm/min Welding current return: 400 A Dimensions (B2): Column 1 with base: Length: 970 mm Width: 885 mm Height: 2350 mm Net weight: 1200 kg Column 2 with carriage: Length: 970 mm Width: 1030 mm Height: 2350 mm Net weight: 1600 kg Excellent condition, complete documentation included We have multiple column elevation/rotator units in stock with load capacities from 1 ton up to 15 tons 2 complete sets (units) available

Condition: excellent (used), load capacity: 4,000 kg, Equipment: foot remote control, Heinrichsglück 4 ton load capacity, TOP condition 4000 kg capacity welding positioner, complete set Horizontal load capacity: 4000 kg, tilted: 4000 kg Infinitely variable tilt and speed adjustment Very robust construction Ppedpjyuph Ejfx Ag Dor Speed continuously adjustable from 0.05 to 1.5 rpm, digital display Table diameter: 1500 mm Height horizontal: 1230 mm, tilted to center: 1000 mm Length 2.0 m x width 1.6 m Hand remote control and foot pedal

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm Pedpfjyupd Hex Ag Dspr - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment Excellent condition Height min: 1050 mm Height max: 2200 mm Total height: 3250 mm Rotational speed: 0.2 - 1.0 rpm Pjdpfxsytgu Te Ag Depr Torque: 24,000 Nm Lifting speed: 1.5 m/min Handheld remote control

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-TA-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Pjdpfxetiy I Ij Ag Djpr Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package