Used Ube Extrusion Press for sale (13,902)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Iisdpozdn H Refx Anwoc Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position Iijdpfxozd Tf Ss Anwsc • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Iisdpszd Shrofx Anwjc

Condition: used, Year of construction: 1963, total length: 2,300 mm, total width: 1,500 mm, total height: 2,880 mm, Empty weight: 8.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: 12691 - Drive system: Conventional Iedswmfrrjpfx Anwsic - Press force [ton]: 160 - Min. stroke [mm]: 25 - Max. stroke [mm]: 118 - Table length [mm]: 950 - Table width [mm]: 650 - Ram width [mm]: 340 - Height adjustment [mm]: 75 - Motor power: 7.5kW - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2018, functionality: fully functional, operating hours: 3,915 h, Hydraulic baling press, model JM-125/75, manufactured in 2018. Designed for the pressing and compaction of ferrous scrap and other metallic waste, providing high productivity and optimal density of the resulting bales. The machine is constructed with a high-strength steel structure and equipped with a high-performance hydraulic system, ensuring reliability and durability even under intensive working conditions. Iijdpfx Aozdfzyonwoc Main features: Type: Stationary hydraulic baling press Pressing force: 125 tons High-performance hydraulic system Designed for the processing of scrap and metallic waste Robust construction for continuous industrial use Easy access for maintenance and operation This press is an efficient solution for recycling centers, metal recyclers, and facilities dedicated to the management of industrial waste.

Condition: used, Year of construction: 1989, total length: 1,600 mm, total width: 1,700 mm, total height: 2,750 mm, Empty weight: 4.000 kg Iiodsx Dkfpjpfx Anwoc - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total length: 2,000 mm, total width: 1,100 mm, total height: 2,300 mm, Empty weight: 500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Iodpfxjxhcgyo Anwsic Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Empty weight: 5.500 kg Iodpfxoylb Eds Anwsic - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg Isdpfezdnzhsx Anwjic - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: unexamined, Year of construction: 2018, This Wemhöner vacuum press, type: Variopress - Basic 1000S, with 3 paternoster magazines for film rolls, will be auctioned in our RESTLOS online auction "Wood and metalworking machines - vacuum press - veneer shears - metal circular saw". You can find this and many other machines from the field of wood and metalworking regularly on our RESTLOS auction platform. Machine data: Manufacturer: Wemhöner Type: Variopress - Basic 1000S Year of manufacture: 2018 Technical data: Heating plate format: 2850 mm x 1550 mm Type of electric heating plate: Aluminum heating plate on top Total pressing force: 2400 kN Isdpezfal Ujfx Anwsic Chamber pressure max.: 6 bar Operating temperature max.: 180 degrees Celsius Batch or workpiece size max.: approx. 2460 mm x 1180 mm Thermoplastic film as roll goods Width of the film: approx. 1430 mm Thickness of the film: approx. 0.25 mm - 1 mm Pressure chamber height: max. up to 180 mm Installed power: approx. 46 kW Required air pressure: approx. 8 bar Scope of delivery: - Including 3 paternoster magazines for film rolls Notes: - Machine has already been disassembled and stored - The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding. As shown in the pictures Without any other items or components shown in the pictures Functionality not tested

Condition: good (used), JDS hydraulic press Bed: 505 x 510 mm Iijdpfx Ajiki Ahenwjc Dimensions: 140x140x285 cm LxWxH

Year of construction: 1992, condition: good (used), H Bret press Type: PPH 30 Capacity: 30 T Bed: 345 x 1345 mm Year: 1992 Dimensions: 160x115x256 cm LxWxH Included control unit and documentation Ijdpfxoiuc Nws Anwsic Turn over to pressbrake possible!

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Ijdpfezb Il Nsx Anweic Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: refurbished (used), Year of construction: 1987, machine/vehicle number: 3163, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 360 mm, table length: 220 mm, Equipment: safety light barrier, Schoen hydraulic double-column press NH 25 (3163) completely overhauled machine – year of manufacture 1987/2026 Iiedpfx Anozd Akqjwec Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table (width): 360 mm Table (depth): 220 mm The machine is undergoing a general overhaul new control system new light curtain hydraulic system revised

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Heidelberg GTO 52+ Plus version Varn Kompac 14 million impressions Powder spray Available immediately Iodjzdvh Aspfx Anweic

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Format 37 x 52 cm CP-Tronic Electronic register control Ink film thickness control Deionization system (Eltex) in the feeder and delivery Plus version Isdpfx Ajzdu R Nenweic Printing on one side (1/1) or both sides (2/0) in color Alcolor V with Variosystem 40 million

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iisdpfxex Sr Eve Anwec Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Iisdpfezdufyex Anwjc Width 1000 mm Depth 780 mm Weight 325 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm Iedozfh Hyopfx Anwjic - Adjustable installation height up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 max. wire diameter 12 mm max. wire cross-section 115 mm max. ejector stroke 90 mm max. ejector on the punch side 20 mm Motor approx. 15 kW Power max. 160 pieces/min, depending on the part to be manufactured 3rd station: optional deburring or forming Iijdpfszd Da Hsx Anwsc Press Biauli BF17B, year 1998, 13 tons Oil pans 424 kg Conveyor belt 199 kg Control cabinet 205 kg Platform 186 kg Machine parts/accessories 565 kg We sell the above items with exclusion of liability for defects in materials and workmanship and without any warranty on functions or their dimensional accuracy. No major defects are known to us, and the machine has functioned perfectly up to the present.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 755T, functionality: fully functional, cutting length (max.): 3,050 mm, sheet thickness steel (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! Iiodpfxozd U R Ns Anwsc Includes a second Siemens S5 control unit as a spare part! TECHNICAL DETAILS Steel sheet thickness: 8 mm Cutting length: 3,050 mm MACHINE DETAILS Hydraulic pressure: 250 bar Total weight: 10,000 kg EQUIPMENT Cybelec documentation Wiring diagram Second Siemens S5 control unit (spare)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, type of input current: three-phase, table width: 805 mm, table length: 1,205 mm, oil tank capacity: 250 l, total length: 2,050 mm, total width: 1,410 mm, total height: 3,200 mm, overall weight: 8,000 kg, DGUV certified until: 08/2020, pressing speed: 11 mm/s, Equipment: documentation/manual, safety light barrier, For sale: fully operational and complete Ageo 160t hydraulic press. Full documentation and maintenance logbook are available. On-site inspection possible. VAT invoice provided. Iiodpfoyxg D Hox Anwoc

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier Iiodpsya Iaqjfx Anwsc - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. Iedpfx Asit I Rtsnwjic The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Price: EUR 650,000

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Ijdpfxozb Eg Ro Anweic Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm