Used Unbekannt Pipe Heating Device for sale (29,509)

Condition: good (used), For sale: a professional ULVAC HELIOT 701D helium leak detector, designed for precise detection and localization of leaks in vacuum systems, pipes, and industrial equipment. The device is functional. The plastic housing has cracks or damage in several places. All damage is clearly shown in the photos and does not affect the device's operation. Technical specifications from the nameplate: Njdpszu Tr Tsfx Agrodb Manufacturer: ULVAC, Inc. Model: HELIOT 701D / Type 701 Serial number: 1711 Year of manufacture: 12/2005 Power supply: 220 V AC Frequency: 50/60 Hz Power: 1.0 kVA Weight: approximately 39 kg Country of manufacture: Japan Available connections: Leak Rate, Sniffer, Ext. I/O, Audio, and Remote Used condition, with visible signs of wear. The device is technically functional but has a damaged plastic housing – please examine the photos carefully.

Year of construction: 2017, condition: ready for operation (used), Granulation line, regranulation extruder, Yei machine I. PE/PP waste regranulation line, model: YDN-120 Material: PP/PE Maximum capacity: PP: 550 kg/h PE: 650 kg/h Installed power: 420 kW Power consumption during operation: approx. 250 kW Water consumption: approx. 25 l/min Required water pressure: 3 kg/cm² 1) Extruder Designed for double degassing Double-stage gearbox Screw diameter: 120 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 32:1 Rotation speed range: 0-130 rpm Heater power consumption on the barrel: 51 kW Number of heating zones on the barrel: 5 Barrel cooling: 1/8 HP x 5 fans Motor: 175 HP, controlled by a frequency inverter 2) Screen changer, 15 HP Filter area: 90,639 mm² x 2 Equipped with a pressure sensor with alarm. In case of excessive pressure, the machine will automatically shut down. One temperature control zone. 3) Knife system for granulating at the extruder head Number of knives: 4 pcs Temperature control: 1 zone Heating power: 3.5 kW 2 heads for PE Nedozhm Ihspfx Agrodb 4) Water cooling system Motor: 5 HP, controlled by a frequency inverter 5) Shredding and pre-compacting drum Vertical type with temperature sensor Motor power: 150 HP, controlled by a frequency inverter Equipped with 12 rotary knives and 17 stationary knives Mill diameter: 1300 mm Blower: 7 1/2 HP Continuous water cooling device 6) Belt conveyor Dimensions: 4950 mm (length) x 670 mm (width) Motor: 2 HP 7) Vibrating dryer Water pump: 5 HP x 1 Vibration motor: 1/4 HP x 4 pcs Water tank dimensions: 3615 mm x 700 mm x 471 mm 8) Regranulate silo (with a centrifugal blower of 7.5 HP with a transport pipe) 9) Control panel Indicates the operating status of all major electrical devices The machine is equipped with a double cylinder screen changer, allowing for screen changes without stopping the machine. The line is designed in a compact way, which saves usable space. The device requires maintaining the cooling water temperature: 25-35°C Equipment: Enlarged drum to 1300 mm with 150 HP motor Second degassing port on the first screw with a vacuum pump Metal detector 5 HP centrifuge Second "cascade" plasticizing module (150 mm screw) with filter with a single degassing port and vacuum pump double-stage gearbox Parameters of the second plasticizing module Screw diameter: 150 mm Made of SACM 645 steel, chrome-plated and hardened L/D ratio: 20:1 Rotation speed range: 0-130 rpm Number of heating zones on the barrel: 2 Motor: AC 75 HP, controlled by a frequency inverter Control panel Hydraulic screen changer x 2 cylinders Additional equipment Increased filter area on the first screen changer: Standard: diameter 140 mm x W126 mm = 55,389 mm² x 2 After enlargement: diameter 204 mm x W141.5 mm = 90,639 mm² x 2 The delivery includes additional cooling for the control cabinets Static mixer with a connecting pipe for homogenization and uniformization of the mass.

Year of construction: 2018, condition: excellent (used), The following systems have been processed: Profile Kömmerling, 76AD, 76MD, 76Unity, 88MD # High-temperature welding # Welding strip quick-change system Spacer quick-change system Diagonal or parallel joining process Resilient intermediate plates for tolerance compensation Heated boundary plates Weld bead limitation on support and clamping plates 2 mm (optionally 0.2 mm possible) Heated weld bead limitation Weld parameters individually programmable Safety device according to CE Horizontal outfeed device Control technology High-performance JetControl control ensures high ease of operation Intuitively operated information management system with diagnosis and reporting tool Digital visualization of maintenance intervals Display of the profiles to be inserted, indication for profile and spacer changes Nedpfoz Ep Ezjx Agrsdb Individually programmable welding parameters Operating system Windows High-quality PC with 19" TFT monitor USB ports DVD drive # Keyboard and mouse # Data management via database Technical data: Minimum overall depth: 45 mm Maximum overall depth: 120 mm Minimum profile face width: 25 mm Maximum profile face width: 130 mm Working area: 3,000 x 2,300 mm Minimum element size: 320 x 320 mm Maximum element size: 2,600 mm in the running direction Maximum element size: 3,000 mm width Maximum element weight: 80 kg Electrical connection: 230 / 400 volts, 3 phases, 50 Hz Compressed air connection: 7 bar # Air consumption: 50 L/min

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Ndodpfxozzvf Ao Agrob Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press Nedsz Egh Tspfx Agrodb -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm -Intermediate dimension: 200 mm -Dimensions: 1020/600/H1520 mm -Weight: 120 kg

Condition: good (used), Approx. 200 units, stacking cradles for long goods storage, stacking cradles 700 mm wide, 300 and 500 mm high – used - : Price per unit (net): €99 incl. loading! Price per divider: €39 (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Load capacity: 2000 kg Painted in RAL3027 Partially lined inside with plastic strips Approx. 100 pcs. internal dimensions 770x500x500 mm (LxWxH) Approx. 100 pcs. internal dimensions 770x500x300 mm Ndjdpfxoxv Tqlo Agrob Approx. 40 pcs. dividers for cradles with H=300 mm Condition: good Available: immediately! Location: A-8580 Köflach

Condition: excellent (used), 233 USED Kor-Mat Whisk - Mixer. TECHNICAL DATA: - Capacity: 60 L - Heated (heated jacket) EXTERNAL DIMENSIONS (in cm): - Width: 87 cm - Length: 85 cm - Height: 154 cm BOWL DIMENSIONS (in cm): - Width: 49 cm - Height: 34 cm The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Nodoxz A Ahopfx Agrodb ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: Ndodpfeywuihex Agrjb - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 50,000 l, Heating oil tank – storage tank – diesel tank – tank system – steel tank brand new – with a capacity of 50,000 liters – according to EN 12285-2 – Class B – (replacement for DIN 6616), above ground, double-walled, including test certificate, suitable for installation in areas of seismic zone 0. The tank has two saddle supports, a manhole with a dome cover, and is equipped with the following fittings: Nsdpfxoi A Hz Ae Agrodb 1 filling pipe with a TW closure (filling cap) and dip tube, 1 gauging pipe with a gauging rod and gauging rod closure, 1 vent pipe with a vent cap, 1 brand new limit switch with type approval (AIII), 1 ladder and 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The tank will be sandblasted, primed, and painted white externally / RAL 9016 color (sample photo). (Other RAL colors are also available on request!) L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 tons – ex works, loaded free of charge – General: You will receive an invoice with VAT shown. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can, with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 Single-chamber cleaning and disinfection unit (as new condition, year of manufacture: 2017) Product description (source: MMM) High-performance single-chamber cleaning and disinfection unit for the thorough processing of large quantities of medical devices, such as general surgical and MIS instruments, anesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. Ease of operation Loading baskets can be easily loaded from all four sides. Easy-Move rollers: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel – easy to clean Rubberized CoolTouch handles allow hot baskets to be handled. Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Glass doors with double glazing and tempered glass Glass panel with integrated 5.7" color touch screen on the loading side Ndjdpfx Asimdtvsgreb Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not steam-operated) Single or double door: Double door Voltage: 380 – 400 V / 50 Hz Heating: Electric Equipment Machine VE water preheating tank (Tank 1) VE water recovery tank Sound insulation of the front of the unit (Tank 2) Sound insulation of the front of the unit Sound insulation of the side wall Exhaust gas economizer Exhaust gas backdraft preventer Conductivity measurement system Monitoring of HEPA filter Potential-free contacts Recirculation system Connection to the customer’s media supply Hot water connection Dosing system 3 suction lances 3rd dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller conveyor preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode scanner for tray recognition We assume no liability for the accuracy, completeness, and up-to-dateness of the information.

Condition: good (used), Approx. 54 long material racks, 3m long – used -: Only complete lot purchase: Price per item ex location: €139 (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Ndodpfxew Hqkyo Agrjb Dimensions, approx.: L: 3m, H: 0.66m, D: 0.80m Own weight: approx. 127kg Condition: good Available: immediately Location: 67346 Speyer

Condition: like new (used), Year of construction: 2026, functionality: fully functional, - inside diameter 900 mm and inside length 2500 mm - door with the locking system (manually) - fan inside the tank with the electrical engine outside - water cooled - 8 vacuum ports - electrical heating about 15 kw coils - Working pressure 10 bar - Adjustable AIR max. working temperature 180 °C Nodpfx Agezkwh Deredb - Equiped with related valve and pipes -With an inside trolley and outside cart -With 1 set of installation accessories -With automatic control system - PLC unit is Siemens Simatic S7 -With the installation air accessories - weight 1300 kg

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Ndjdpfxjvakdzj Agreb Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 8,000 mm, total width: 5,000 mm, total height: 3,130 mm, inner dimension length: 7,800 mm, inner dimension width: 2,500 mm, inner dimension height: 2,700 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, temperature: 65 °C, Equipment: documentation/manual, overall dimensions of the device: 8000 [mm]: * device length - 5000 [mm]: device width 3130 [mm]; (from item 0 device height - - working clearance of the device: 2530 [mm]: height of the technological opening - Njdsz Dtgajpfx Agrodb . * width of the technological opening - 400 [mm]. - electrical power: 400/230V:N+PE: 50 Hz 36.0 [kW]; * supply voltage, installed power - - - water supply parameters - 2.0 [bar] (0.2 MPa) - running water, d=32 [mm] - gas parameters for burner supply * natural gas GZ 50 • 3/4" connection • minimum gas pressure at the burner -13.8 mbar • minimum gas flow washing machine working chamber - 7800x1500x2700 mm - working chamber dimensions - washing machine working chamber made of - black steel structure, PP plate - chemical-resistant roof fan 2.2 Washing bath tank. material: • supporting structure - black steel structure, - grade 316. * inner lining - 50 mm thick * insulation - mineral wool - PP plate outer lining - 4000 number of baths - natural gas heating medium - 120 kW - automatically adjustable heater power bath temperature - 40 to 65 °C temperature range - PT100 sensor - rod-type bag filter sensor temperature sensor - bath level sensor - filtration of the bath from particles using an external bath circuit (the filter has its own circulating pump) 2.3 Rinsing tank 1. - PP - 3000 L material, number of baths, level sensors - - 2.4 DEMI rinsing tank. - PP material - 3000 L number of baths - level sensors - 2.5 Bath circuit circulating pumps washing - max 222 m³/h - 18.5 kW rinsing - max 198 m³/h - 11 kW DEMI rinsing - max 198 m³/h - 11 kW suction pump - max 222 m³/h - 18.5 kW circulating pump DEMI - 4 m³/h - 0.37 kW diaphragm pump 75 /

Condition: new, Year of construction: 2023, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil / diesel / HVO100. Color: RAL 7035 Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate / type plate according to EN 12285-2, Ü marking Tank suitable for above-ground installation outside earthquake / flood zones. Equipment/fittings: Manway 600 mm with manway cover, screws, and gasket 1.1 Equipment/fittings: Manway 500 mm with manway cover and gasket 1 -Filling pipe 2” with TW closure (filling cap) (from 20 m³ = 3”) -Suction pipe 1 ¼” -Dipstick and dipstick closure - Tank content indicator -Vent pipe with cap 1 ½” -Limit switch with type approval -Leak detection device (optical) = LAS with leak detection fluid -Access ladder with platform for side mounting, supplied separately Sincerely, from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein Ndedpfx Agjh Ukuporsb

Condition: used, Capacity: 2200l, equipment: heating/cooling jacket, large manway cover in the upper tank section, motorized drive unit, separate stainless steel power unit with electric motor, several connections, bottom product outlet at the tank base, piping and process connections on the top section and jacket, stainless steel support frame with height-adjustable feet, an on-site inspection is possible. Ndjdpfjz Eudpsx Agrsb

Condition: good (used), approx. 117 stacking racks, stanchion racks, 2 types - second-hand : Price (net), ex location - only complete acceptance per type! Njdpfx Ajtq Htregredb Type 1: 125.-€ Type 2: 125.-€ Manufacturer: unknown Year of construction: unknown Type 1 - 75 pieces - Stacking racks with wooden floor, green Dimensions: W=1940 mm / W=1200 mm Type 2 - 42 pieces - Stacking racks with wooden base gray W=2400 mm / W=1200 mm Condition: good Available: immediately Location: 77933 Lahr

Condition: good (used), Approx. 105 Euro mesh boxes, – used -: Only bulk purchase: Price per unit ex location: €69 (net)! Nedpfxow Hqauj Agrsdb Manufacturer: unknown Type: unknown Year of manufacture: unknown Dimensions, approx.: L: 1m, H: 0.65m, W: 0.80m Dead weight: approx. 43.5kg Condition: good Available: immediately Location: 67346 Speyer

Condition: used, We offer Viessmann natural gas boilers: 1. Viessmann gas boiler TYPE SX 1 Heating output 225 kW Including pump and valves 2. Viessmann gas boiler TYPE SX 1 Heating output 170 kW Including pump, valves, and piping You will receive a discount when purchasing both boilers. Nedpfoy Dpk Hsx Agrjdb

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Tank rotating device for welding pipes and tanks Manufacturer: PH Maschinenbau Type: PH-RBA 30000-SO AT01H424 Year of manufacture: 2002 Load capacity of the rotating device: 30 tons Rotational speed: 0 to 2 m/min Tank diameter: 500 - 7000 mm Roll spacing: 100 to 2500 mm Center distance between rolls: 500 to 2950 mm Roll diameter: 400 mm Roll width: 540 mm Motor power: 2 x 0.55 kW Power connection: 230 volts, 50 Hz - Infinitely variable speed adjustment via SEW frequency inverter - Cable remote control - Right and left rotation - Both roll pairs are driven - Rolls with 4 rubber tires each - Manual adjustment of the roll spacing via trapezoidal screw spindle - Rail-mounted chassis with drive, steel cast wheels with smooth roll surface Space requirement L x W x H: 3750 x 2100 x 1200 mm Ndjdpszin A Aofx Agrob Weight: 3.2 t Good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Nodszy Ndcjpfx Agredb Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 2014, machine/vehicle number: PST39, Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordinated sequence. The 285-second holding tube provides the retention stage required for yogurt pasteurization, helping maintain consistent process exposure before the product continues through the line. Control and monitoring arrangements should be integrated with the plant process system to supervise temperature, pressure, flow and product-routing conditions.Production Line Integration CapabilitiesThis pasteurization equipment can be integrated into a dairy processing or industrial packaging line upstream of filling equipment. It is suitable for handling yogurt and pure milk within a process layout that includes product reception, preparation, heat treatment, hygienic transfer and downstream packaging. The plate heat exchanger supports efficient thermal exchange in continuous processing, while the holding section provides a dedicated pasteurization stage for yogurt production.In a used bottling line or second hand dairy production installation, equipment of this type is typically connected to hygienic product piping, process utilities and downstream buffer, filling or packaging machinery. Integration planning should consider product viscosity, cleaning procedures, piping configuration and synchronization with the selected beverage production or food-processing line.Machine Condition & Maintenance HistoryThe main Tetra Therm Lacta machine was originally released from the factory in 2014. The Tetra Plex plate heat exchanger is described as original equipment for the machine. The associated heat-exchanger data plate identifies manufacture for Tetra Pak and service by Tetra Pak, with a 2012 year shown on the plate.Operational Performance & VersatilityDesigned for dairy thermal processing, this pasteurizer supports yogurt pasteurization through its dedicated 285-second holding tube and can also be used for pure milk pasteurization through the integrated plate heat-exchange section. Continuous pasteurization systems are an important part of hygienic beverage production and industrial packaging operations where stable thermal treatment is required before filling or further processing.The Tetra Plex plate heat exchanger is engineered for product heating and coolin... Nedsz Ecmxjpfx Agrsdb

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a complete industrial RITTAL TopTherm switchgear cooling system, consisting of a central RITTAL chiller/cooling unit and a total of 16 RITTAL air/water heat exchangers. The system comes from an industrial production facility and was used for the central cooling of several switchgear cabinets. The entire system was in trouble-free operation until it was professionally dismantled. RITTAL Chiller / Cooling Unit Manufacturer: RITTAL GmbH & Co. KG Type: SK 3336.459 Design: KRAE0200TT00V480EF Year of manufacture: 2020 Date of manufacture: 07/15/2020 Serial number: 2020K000069533 Technical data: Nominal cooling capacity: 24,400 W / 24.4 kW Operating voltage: 3 × 400 V / 50 Hz Max. current: 22.3 A Starting current: 111.7 A Max. power consumption: 11,330 W Refrigerant: R410A Tank volume: 78 liters Temperature range: -20 to +43 °C Noise level: 76 dB(A) Protection class: IP44 Weight: 326 kg 16 RITTAL Air/Water Heat Exchangers The scope of delivery includes a total of: 10 × RITTAL TopTherm SK 3210.500 Air/Water Heat Exchanger Useful cooling capacity: 4.0 kW Operating voltage: 230 V Cooling medium: Water Protection class: IP55 6 × RITTAL TopTherm SK 3209.500 Air/Water Heat Exchanger Useful cooling capacity: 2.5 kW Operating voltage: 230 V Water flow rate: 400 l/h Cooling medium: Water Protection class: IP55 Weight: approx. 23.5 kg Ndjdpfx Aozwaa Aegreb The heat exchangers were mounted on the respective switchgear cabinets and supplied with cooling water via the central RITTAL cooling unit. Scope of delivery: 1 × RITTAL TopTherm Chiller SK 3336.459, 24.4 kW 10 × RITTAL Air/Water Heat Exchanger SK 3210.500 6 × RITTAL Air/Water Heat Exchanger SK 3209.500 Existing cooling water pipes and hoses Existing connection fittings and connecting parts Other existing installation and connection accessories as shown in the pictures This offers a largely complete central switchgear cooling system with a total of 16 cooling points. The components come from a professionally installed industrial system, manufactured in 2020. The condition is used; minor optical signs of wear or damage to individual plastic covers can be seen in the pictures. Inspection is possible by appointment. The complete system is preferred for sale. Price: €14,900 net, negotiable Subject to prior sale and errors in the technical data. Technical data according to nameplates and available manufacturer documents.

Condition: refurbished (used), heating capacity: 400 kW (543.85 HP), space requirement length: 4,500 mm, space requirement height: 3,300 mm, space requirement width: 1,400 mm, Warranty on heat exchanger + refractory lining Boiler (heat exchanger + refractory lining renewed) Stoker screw Backfire damper Secondary air blower Primary air blower Flue gas blower Hydraulic unit with cylinder Njdjrp Dvgepfx Agredb Flue gas pipes ( new ) Multicyclone ( New ) Electrical cabinet computer Complete documentation / operating instructions

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, empty load weight: 195 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 13/20-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. Nedpfezzzluox Agredb A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 1300 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 13/20-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1300 Working pressure (bar) 30 - 200 Max. Water heating temperature (°C) 80-155 Connection power (kW) 9.3 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 195 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.