Used Union T110 for sale (208)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Bjdjzlhmmspfx Aqwjll Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. Bodpfxezk Npgs Aqwsll - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107965, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel path: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel path: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests in relation to part diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum rotational speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Tool shank as per DIN 69880: 12 positions - BMT65 - Number of positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Blsdpfx Aoxw Svioqwjl Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total machine dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: Optimized chip removal and easy loading/unloading - CNC controller: GE Fanuc FS 32i B - High precision: Axis positioning accuracy in X, Z ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and wide speed range - Process control: Marposs T25 measuring probe - Automated loading/unloading: Parts are loaded and removed via integrated automation system - Live tooling: Enables drilling and milling operations in addition to turning - Tool life monitoring with sister tool management - Chip conveyor & coolant filtration system Knoll with paper filter and 40 bar pumps (capable of filtering 2 machines) - Fully enclosed work area; integrated work lighting - Documentation: Available electronically; hardcopy manuals incomplete Machine status: NOT WORKING - Live tool drive motor - Safety locking mechanism (Euchner) for loading door - Turret drive motor - Turret motor driver - Lubrication pump - Hydraulic manifold (4x electrovalves) - Lubrication pressure system - Rotary union - Hydraulic cylinder for loading door - Spindle clamping/unclamping sensor

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6860 0007, Please let us know your quote. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Blodjvbgiiepfx Aqwel Machine, loading system, conveyor belt, workpiece carrier Machine specifications: 5-axis grinding center including oval feed belt and loading gantry 12-station tool changer with HSK 63 Max. X-axis travel: 500 mm Max. Y-axis travel: 650 mm Max. Z-axis travel: 650 mm Table size: 500 x 650 mm Cut-off detection Nordmann dressing spindle Oil supply via central factory supply

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Blsdpfxsxxalnj Aqwel Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: excellent (used), functionality: fully functional, mileage: 5,580 km, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 7,300 kg, empty load weight: 6,600 kg, operation weight: 8,200 kg, number of seats: 2, Year of construction: 2012, operating hours: 5,580 h, Equipment: adjustable chassis, all wheel drive, differential lock, hydraulics, An authorized SUBARU dealer in Łaziska Górne presents a CATERPILLAR AP 300 paver. The machine has no accident history, comes from the first owner, and was used exclusively in Sweden. The AP300 is a small to medium-sized paver with a spreading width of 1.75 m to 4.0 m, making this model ideal for work on city streets, bike paths, sidewalks, shoulders, and other small to medium-sized areas. NOTE! We have two identical CAT 300 units available (see the last photos) - this orange one has only 2061 operating hours. The price is lower before refurbishment compared to the yellow one. A significant discount is available when purchasing two units. - Transport is possible within the European Union. ===•••===== A narrowing attachment allows spreading to a width of up to 700 mm (27 inches) for work in trenches and other narrow spaces. Technologically advanced options, such as eco mode, are available. Automatic filling, activation of the feeder system with a single touch, and an automated driving mode make the combination of this paver with the table an extremely efficient and versatile solution for small and medium-sized contractors. ====•••===== Machine type: Wheel-mounted asphalt paver Cat C3.3B engine Engine power 55 kW / 73.8 HP Operating weight 8000–8200 kg Transport weight 6600 kg Standard working width 1.75–3.42 m Maximum spreading width 4.0 m Minimum spreading width 700 mm Maximum output 406 t/h Max. travel speed 16 km/h Max. paving speed 61 m/min Wheelbase 1950 mm Transport and working dimensions Parameter Value Transport length 5029 mm Transport width 1938 mm Transport height 2645 mm Working length 5047 mm Working width 3180 mm Height with canopy 3415 mm Operating capacities System Capacity Fuel tank 110 l Engine oil 13.2 l Cooling system 9 l Flushing system tank 28 l Model features Bjdpsy Szcksfx Aqwell wheel drive providing good mobility on urban construction sites, ability to work in very narrow trenches (from 700 mm), automatic control of material feed, ECO mode to reduce fuel consumption, SE34 V or SE34 VT screed, good operator visibility and compact dimensions. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers - Please contact us directly by phone to get your best price :)

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Bsdpfx Aet Hwq Roqwjll Thank you for your interest.

Condition: excellent (used), Year of construction: 2019, operating hours: 1,417 h, functionality: fully functional, machine/vehicle number: 190.315, BRIMATO: Automation for Cutlery. Sorting and hygienic packaging of cutlery, automated addition of other items such as salt, pepper, toothpicks, or napkins, precise cutlery counting, detection and sorting of different types of cutlery—whether metal or plastic—are the challenges we solve and have already successfully implemented. The process reliability and durability of our cutlery automation technology ensure a fast return on investment (ROI) and reductions in personnel costs. With BRIMATO automation, hygiene is sustainably optimized all the way to the end user. Bljdpfxjxxan Ne Aqwel BRIMATO’s cutlery automation solutions are designed for hospitals, event caterers, large canteens, student unions/cafeterias, and inflight caterers.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Bedpfszf Admsx Aqwell Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: used, Technical details: faceplate diameter: 785 mm revolution per minute: 4,5 - 180 (Planscheibe) U/min Speed of boring spindles: 4,5 - 900 U/min. tool taper: SK50 weight of the machine ca.: 3,7 t space requirements of the machine approx.: 3,6x1,3x1,6 m spare part for a table type Boring and Milling Machine WMW BFT 130 with with headstock incomplete (as it can be seen on the picture!!) - diameter facing of a flange:0-1400mm - diameter for drilling: max. 800mm - diameter at face turning: 0-1400mm Bjdpeu Nk Ehefx Aqwjll - spindle diameter: 130mm - drilling depth: 1000mm *

Condition: good (used), TGL: 28561/01 Bljdomikdhjpfx Aqwjl Table number: 14167 diameter: 315 mm footprint: 380 x 600 mm Height: 150 mm Accessories/equipment: graduation on table 360°, rotatable Condition: good weight: 75 kg dimensions: 600 x 600 x 320 mm dimensions with frame: 700 x 700 x 1.500 mm

Condition: excellent (used), The WZA is a ventilation unit in a cabinet design. It provides supply and exhaust air functions with integrated heat and moisture recovery. The outdoor air supply is provided via a facade connection. Bledpfxezr Rfle Aqwel The units were commissioned in 2023 but were only in operation for approximately 1 to 1.5 years. A total of 6 units are available. A complete purchase is preferred, but individual sales are also possible. Legal note regarding product safety (GPSR): This product has been demonstrably placed on the market in the European Union before December 13, 2024. Therefore, according to Article 54 of EU Regulation 2023/988 (GPSR), it falls under the legal transitional provision for existing stock. The obligation to subsequently record and display digital manufacturer contact information (such as specific email addresses) or modern online hazard warnings in the advertisement does not apply to this item.

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Model: Sprint International Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Bsdpoy Au Ubofx Aqwell Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm Blodpfoy I Srzox Aqwsl - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F421.24213, Year of construction: 2025, operating hours: 430 h, 3DGence INDUSTRY F421 – Excellent Condition Showroom Unit - Only 430 Operating Hours Price: EUR 38,900 net + shipping within the EU We are offering a 3DGence INDUSTRY F421 professional high-temperature industrial 3D printer in excellent condition, with only 430 operating hours. The printer was purchased directly from 3DGence in February 2025, when we were an official 3DGence partner. It has been used very little and is in excellent technical and cosmetic condition. Key advantages: 3DGence INDUSTRY F421 Only 430 operating hours Purchased directly from 3DGence – February 2025 Still covered by the manufacturer's warranty Full technical support from 3DGence M280 Printing Module included M360 Printing Module included Professional industrial-grade machine for demanding engineering applications Excellent condition Original purchase documentation available Manufacturer support and warranty status can be verified with 3DGence Included: 3DGence INDUSTRY F421 printer M280 Printing Module M360 Printing Module Original equipment and accessories supplied with the machine Documentation Bjdozulwuepfx Aqwoll Why this machine? The INDUSTRY F421 is designed for professional and industrial applications requiring high-temperature materials and reliable, repeatable production. The included M280 and M360 modules provide flexibility for a broad range of engineering-grade materials and applications. With only 430 operating hours, this machine offers an opportunity to acquire a nearly new F421 at a significantly lower cost than a new system, while retaining the manufacturer's warranty and technical support. The machine is fully operational and can be inspected and tested before purchase. Operating hours: 430 hours Year of purchase: 02/2025 Location: Slovakia / European Union For further technical information, additional photos, documentation, or to arrange an inspection, please contact us.

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Blodpfoxq Exwex Aqwel

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Bsdsxxv D Hepfx Aqwell If you have any further questions, please feel free to contact us!

Condition: excellent (used), Mitutoyo contour&roughness measuring machine Formtracer CS 3000 H4 in very good condition Bljdpop Ecg Rsfx Aqwjl measuring ranges: Z = 5mm (stage 350mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 5.3 Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Included are a lot of measuring tip (new price appx. € 3.000,--) Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel, with a working and maximum allowable pressure of 11 bar, is designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. The tank is made of galvanized steel sheet, providing an excellent protective barrier against external factors and corrosion and significantly extending the service life of the unit compared with standard painted tanks. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Bedpfx Aozwlzfsqwjll Key Features of the 500 L Galvanized Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. Galvanized finish – the tank surface is galvanized, providing an attractive appearance and high resistance to demanding conditions in workshops and production halls. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality construction – durable galvanized external coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Compliance with standards – the tank meets pressure equipment safety requirements and is suitable for registration with the Polish Office of Technical Inspection (UDT). Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a galvanized coating resistant to external factors and corrosion. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection ports: 6 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 130 kg Number of connections 6 Connection sizes 1 1/4", 2", 1/2" Dimensions 2030 × 600 mm Tank capacity 500 L Working pressure 11 bar Maximum pressure 11 bar Wall thickness 4 mm Diameter Ø 600 mm Height 2030 mm

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm Bsdpszuy Nlsfx Aqwjll - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication - Closed pressure beam - Film cutting device Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA - Motor power: 7.5 kW - Suction nozzle 300 mm - 3 collection containers, 250 l each - Integrated extinguishing system Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2009, Horizontal machining center Machine type: DMG DMC 65 H duoBlock Control: Siemens 840D Solutionline Year: 2009 new spindle: 2026 SPECIFICATIONS Travel X-Axis: 700 mm Y-Axis: 700 mm Z-Axis: 700 mm Spindle speeds: 12.000 rpm Tool: CAT 40 Toolchanger Tool capacity: 45 Amount of paletts: 2 Bljdpfx Aozi Dz Ieqwsl Palett size: 500 x 500 mm Equipment Chip conveyor Chip rinsing pistol Internal cooling: 40 bar Cooling tank: 960 l Caliper: Renishaw Tool setter: Blumlaser 3D Quickset Electronical handwheel New in 2026 Spindle bearing Rotary union All pneumatic lines All oil and air filters All oils and fats Laser serviced Various wearing parts

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit Bsdpfxsd Swtae Aqwoll - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: excellent (used), functionality: fully functional, mileage: 16,300 km, gearing type: hydrostat, fuel type: diesel, overall weight: 30,800 kg, empty load weight: 30,800 kg, lifting height: 6,900 mm, drive condition: 90 %, chain condition: 90 %, number of seats: 1, shovel volume: 3 m³, suspension: steel, Year of construction: 2018, operating hours: 15,999 h, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, head guard, hydraulics, low noise, onboard computer, rear pickup, steel tracks, tilting carriage, An authorized SUBARU dealer in Łaziska Górne has a Japanese-made CAT 330D2L crawler excavator for sale, complete with a set of three buckets and a soil loosening hook. Inspected by our mechanics, the hydraulics are fully functional and have minimal play. It has been nicely refurbished and prepared for further heavy-duty work. It features 60cm wide steel tracks, a GPS MC3000 for precise digging, and is additionally equipped with 360-degree cameras. WE OFFER AFFORDABLE TRANSPORT THROUGHOUT THE EUROPEAN UNION AS A PROMOTION WITH OUR FLEET! The price includes a complete set of documents for registration. We offer every form of payment: Leasing, credit, cash, and bank transfer. With cash payment or bank transfer, you can drive the vehicle away from the dealership immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid cars and trucks to the specified address throughout Europe. Bsdjzadcbepfx Aqwsll More information about our services is available from our sales representatives. Engine: Model: Caterpillar C7 Type: diesel, 6-cylinder, turbocharged, intercooled Displacement: 7.2 l Power: 204 kW (approx. 277 hp) Fuel injection: HEUI (hydraulic-electronic) Operating parameters: High torque at low speeds Very good cooperation with the hydraulics Stable operation under heavy load Advantages: Simple and durable design Low operating costs No complex exhaust emission electronics Proven unit for heavy earthmoving work Hydraulic system: Maximum working pressure: 35 MPa Pressure in lifting mode: 38 MPa Pump flow rate: approx. 480 l/min Rotation pressure: approx. 29.8 MPa Working forces: Bucket digging force: approx. 179 kN Arm digging force: approx. 126 kN Swing mechanism: Swing speed: approx. 11.5 rpm Torque: approx. 110 kNm Operating parameters: Maximum digging depth: approx. 7.2 m Maximum reach: approx. 10.7 m Loading height: approx. 6.9 m Maximum digging height: approx. 10 m Working equipment: Bucket capacity: approx. 1.5–1.8 m³ Boom length: approx. 6.15 m Arm length: approx. 3.2 m General parameters: Operating weight: 30800 kg Undercarriage: LC (Long Carriage) Track width: approx. 600 mm Application and main features: High digging force and efficient hydraulic system Simple and durable engine design with no complex exhaust emissions Very good parameters for heavy earthmoving and loading work Transport dimensions: Transport length: 10.4 m Transport width: 3.19 m Transport height: 3.35 m Undercarriage width (LC): 3.19 m Track length on the ground: 4.0 m The stated price is net and applies to exports and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price!

Condition: used, Year of construction: 1999, plate width 2980 mm plate depth 3000 mm Bsdpfxjgxqvzj Aqwsll plate height 1400 mm total power requirement 11 kW

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 1 mm, travel distance Z-axis: 550 mm, Mitutoyo roughness measuring machine Surftst SV 3100 H4 in very good condition measuring ranges: Z = 0,8mm (stage 550mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 4.0 machine will be equiped with a very new roughness sensor (4mN) Overhauled measuring table (50x100mm) and self centering vice for € 2.500,-- on demand. Bedpfx Aqsrdg H Ujwell Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union