Used Vemag Sk4675 Dispenser for sale (497)

Condition: new, Year of construction: 2025, functionality: fully functional, New Pallet Magazine / Pallet Dispenser Specification: Configurable Pallet Dispenser for EUR or different pallets MAX capacity of up to 15 pallets Pallet type: width from 750 up to 1200mm It could be mounted on the pallet conveyor. Main Power: 240V 50Hz Air Compressor 100L-200L Air Pressure: 6-8bar Control: Delta PLC/HMI Currently, in stock, we have 10 pieces. Bdsdpfoi Hnz Tox Adisc PROTON EE-ELEKTRONIKA d.o.o

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Bedpfx Adsxcvzasiodc Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2VHD12-3D Hygienic Dispenser, Hygienic metering pump for precise volumetric dosing of low- to high-viscosity and chunky media. Product-contacting surfaces Elastomers with FDA compliance declaration Bdodoxcgihjpfx Adiec Product-contact parts can be autoclaved Easy integration due to compact design

Condition: like new (used), Good working condition. Please check out our other listings as well. Bodpfx Adoimwxweisdc

Condition: new, Year of construction: 2025, functionality: fully functional, Mobile belt conveyors with rubber belt type Chevron 32. Standard belt width 600/800 mm. Standard conveyor lenghts from 6 up to 14 meters. *Other lenghts and belt width available on request. Lifting height up to 7 meters, depending on the model. Conveyor capacity up to 180 m3/h with drive power ranges from 2,2 up to 5,5 kW depending on the model. Belt speed approx. 1,5 m/s. Main frame and chasis made from structural steel, painted in our standard colors RAL6018 (Green) + RAL7016 (Anthracite Grey). *Different color painting available on request. Hot dip zinc plating also available on request. Chasis is standardly equipped with rubber tyres. Incline regulation is hydraulicaly assisted with manual hydraulic pump. Bsdjwywyuspfx Adisdc *Automatic hydraulic power pump available on request. On request we also offer steering systems, various intake hoppers and outfeeding chutes for mobile conveyor belts. Delivery time for individual standard conveyor is approximately 4 weeks depending on the production effort at the time of the order. Price and payment conditions on request.

Condition: excellent (used), MADO MEW 731 with fridge and mixer arm Type - MEW 731. Capacity - approximately 3000kg/h. Auger diameter - approx. Vessel liters - approximately 250 liters. Motor - 21.0kW, 50A. Bjdpfju Hzh Isx Adijdc Vemaglift included. CLH.24.

Condition: used, AZO dispensing cabinet, feed cabinet Set of 2 Bedpfxjzavw Re Adisdc Equipped with a butterfly valve Equipped with a bunker vibrator Entirely made of stainless steel 316 Mounted on a weighing frame (load cells are defective) See our other listings.

Condition: used, Year of construction: 2017, Overview  This filling monoblock was manufactured in 2017 by CIMEC. The machine is designed for filling applications in the liquor and spirits industry. The machine is currently still installed and can be visited on request. Technical data  Capacity: approx. 3,000 bottles per hour Application: Filling (liquor / spirits) Configuration: Model MONDIAL MONOBLOCK LD 9/8 Filling System: Gravity filling Number of Filling Valves: 8 Number of Rinsing Nozzles: 9 Number of Labelling Heads: 1 Sealing: It applies heat shrink capsules on the neck Water Pressure (Rinsing): 2 – 3 bar CIP Cleaning Temperature: up to 80°C (water) / 100°C (steam at low pressure) Electrical Supply: 400V, 50Hz, 3-phase Components & Features: Rinsing & Filling Section: 9-head bottle rinser with “No Bottle / No Spray” system 8-valve gravity filler with adjustable filling level Electrical regulation of filling height and level Support system for heavy bottles Automatic tank level control via sensors Compatible with multiple bottle neck formats (including change parts) Labeling & Sealing Unit: Self-adhesive labeler (1 head) Optical label centering system for precise application Capability to apply label and back label on the same bottle Automatic capsule dispenser with thermal sealing head Guides and supports for multiple cylindrical bottle formats Control & Operation: Touchscreen interface with electronic control Adjustable production speed (manual and automatic modes) Entry and exit bottle sensors Integrated safety systems with automatic stop functions CIP (Cleaning in Place) function for internal cleaning and sanitation Bjdpjzaw Rrsfx Adiodc

Condition: as good as new (ex-display), Year of construction: 2026, High pressure cleaning unit, high pressure flushing unit, high pressure built-in flushing unit on hot galvanized and painted high quality steel frame with forklift lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60l/min. at 150bar | Engine: Kohler 19kW Salmon 45/200 | 45l/min. at 200bar | Motor: Kohler 19kW Salmon 35/250 | 35l/min. at 250bar | Motor: Kohler 19kW Salmon 30/300 | 30l/min. at 300bar | Motor: Kohler 19kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. dimensions with 400l water tank LxWxH: ca. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min. - Working pressure: 150 - 300 bar Bjdpfeiky H Ssx Adiedc MOTOR: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM, alternator and spark plugs - Emergency stop button ELECTRICAL OPERATION: - On / off hydraulic hose reel; - On / Off bypass; - Speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low water protection against dry running of the high pressure pump with automatic shutdown function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH PRESSURE HOSE REEL: - Type: electric hose reel - Material: stainless steel - Capacity: max. 80 m ½" u. 80 m 3/8" high pressure hose. - Hose: 80 m ½" high pressure hose (included) - Hose guide: manual LOW PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾" low pressure hose - Hose: 35 m ¾" low pressure hose (included). WATER FILTER: - With washable cartridge and drain valve . - Filtration degree: 50 mesh INCLUDED: - Multifunction radio remote control IMET; - On / Off motor; - On / Off Bypass; - Speed control +/-; - Winding / unwinding hydraulic hose reel; - Emergency stop button; - Battery charger for radio remote control; - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high pressure hose; - 50, 60 or 80 m 3/8" high pressure hose with G3/4" connection; ACCESSORIES ON REQUEST: - Kit STORZ for connection to the water hydrant; - Kit UNI 45 ; - Version with 2 HD reels; - Mobile hot water generator 10 kW - 12 VDC; - Kit high pressure spray gun, swivel and quick coupling; - Kit high pressure lance with flat jet nozzle 15° / rotating nozzle; - Kit lance for high flow; - Kit rotary nozzles; - Kit double head nozzles; - Kit water sand lance; - Kit detergent dispenser; - Step cleaner; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Other accessories on request

Year of construction: 2009, condition: used, Palletiser Bdedpfx Adsvc Ucgsiec Solema Cartesio Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system

Condition: used, Year of construction: 2007, operating hours: 49,703 h, functionality: fully functional, machine/vehicle number: Roboter 1: 24-53147 / Roboter 2: 24-53148, overall weight: 910 kg, load capacity: 7 kg, arm reach: 1,800 mm, ABB industrial robot dual system with 2x IRB 2400L Type B and IRC5 M2004 MultiMove controller for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, dispensing, application, and synchronized automation. It has a payload of 7 kg and a reach of 1800 mm, was manufactured in 2007, and has 49,703 operating hours. The software version is RobotWare 5.13.2039.02. It is equipped with a MultiMove system configuration for synchronized operation of two robot arms, as well as the software options MultiMove Independent, SingleProcess, Dispense, World Zones, Fixed Position Events, Path Recovery, Collision Detection, File and Serial Channel Handling, Logical Cross Connections, Analog Signal Interrupt, and Multitasking. Bdedpezal Tzjfx Adioc

Year of construction: 2022, condition: used, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Bdjdpfx Ajx R A Rtediec Rotor designed for cooling Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, DGUV certified until: 07/2027, overall weight: 49 kg, total length: 450 mm, total width: 620 mm, total height: 1,030 mm, space requirement height: 1,030 mm, space requirement length: 450 mm, space requirement width: 620 mm, NEW NEW Lye Mixing Device for Pretzel Lye NEW NEW Includes hydrometer Includes collection tray and dosing cap Bdodpfx Aderkz E Ueioc Stainless steel cart with locking castors Maximum safety for the desired lye concentration. Optimally mixed, quantities dispensed precisely as needed. Dimensions (WxDxH) in mm: 620 x 450 x 1030 NEW device + spare parts service More bakery machines in stock!

Condition: new, Year of construction: 2026, functionality: fully functional, Pallet Board Stacker PBS M4 + DS-1.0 Automatic Pallet Production Line Stacker with Crosscut saw (DS-1.0) Automatic pallet board stacker designed for efficient integration into pallet production lines. Ensures precise board alignment, stable stacking and high production capacity with minimal manual handling. Included equipment: -Control program -Stacker with integrated lift -Board unscrambler -2 spacer dispensers with support frame -Discharge conveyor with lift platform -Package lift for easy forklift handling Bdsdpfxjzauclo Adisc -Suitable for continuous industrial pallet board production. High-performance double-rip crosscut saw designed for seamless integration into automated board production and stacking lines. Crosscut saw (DS-1.0) -Specifically built to operate within a board stacker line. -Synchronized Workflow - automatically matches the speed of the stacker for maximum efficiency. -Clean Cuts - precise double-blade system for high-quality cross-cutting. -Designed for 24/7 sawmill environments. -Ideal for sawmills looking to automate the transition from cutting to stacking with zero bottlenecks.

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, Disassembled prototype filling/dispensing system – special system with V2A tanks For sale is a disassembled prototype filling/dispensing system from industrial use. This is a custom-made/special construction from Evonik/Daimler AG. The system was professionally disassembled, is in good condition, and is prepared for transport. Technical data / equipment * Manufacturer: Evonik / Daimler AG * System type: Prototype filling/dispensing system * Model: Special system / tank farm and filling system * Year of construction: 2010 * 2 tanks with 40 m³ each * 1 tank with 30 m³ * Tanks / system made of V2A * Pumps stored separately * Pump list can be provided upon request * Condition: disassembled, untested, prepared for transport Bedpfozabgwjx Adiodc Notes Due to the disassembled condition, the system is sold untested. An inspection is recommended. Technical testing, media compatibility, recommissioning, and transport organization are the responsibility of the buyer. Further information, existing documents, and the pump list can be provided upon request. Please contact us preferably by email. Telephone inquiries should only be made after prior appointment.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 158 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 9/18-4M HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Bodpeza Efdofx Adiodc Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 9/18-4M Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 400 - 900 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 6.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 158 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 133 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 895 M Eco HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 1000 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 85-155 Bdsdpfx Ajza Ar Isdioc Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 133 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, TURBO SYSTEMS D252P | Pneumatic portioning machine Manufacturer: TURBO SYSTEMS LTD. Model / Type: D252P Serial number: D252P6409056 Year of manufacture: 2014 Power supply: Pneumatic Bdedpfx Aezagqhsdioc Overall dimensions: 1400x700x1600mm The Turbo Systems D252P is a professional pneumatic portioning machine, a high-performance piston dispenser designed for the precise portioning and dosing of a wide range of products in the food industry. The machine is widely used in delicatessen plants, meat processing facilities (dosing pâtés, fillings), confectionery and bakery operations (fillings, creams, sauces), as well as in the ready-meal production and industrial catering sectors. Thanks to its pneumatic drive system, the device guarantees consistent and smooth operation without the risk of overheating components.

Condition: excellent (used), The Tramper D-360 trays dispenser is a reliable and compact machine designed to automate the packaging process in the food industry. The device feeds trays to the packaging line quickly and precisely, increasing efficiency and reducing manual labor. It is ideal for plants producing ready meals, meat, fish, cheese, and other products that require tray packaging. Technical data: Producent: Tramper Technology Model: D-360 Project number: T99278 Year of manufacture: 2013 Main power supply: 400 VAC Control: 24 VDC Air supply: 6 bar Tray dimensions: 227 x 178 mm Weight: 160 kg Construction: stainless steel – suitable for hygienic environments ✅ Key advantages: Automatic tray feeding – smooth integration with tray sealers and packaging machines Compact design – saves space on the production line Simple and intuitive operation – easy adjustment to different tray formats Bdjdpfewmn Amex Adijc Compliance with sanitary standards – ideal for the food industry High reliability – proven Tramper brand quality Easy installation and maintenance – design engineered for everyday use The Tramper D-360 perfectly supports the automation of the packaging process, reducing downtime and increasing line efficiency. It is the ideal solution for manufacturers looking for a proven and efficient tray feeding system.

Condition: used, Year of construction: 2012, Technical details: Number of drawer: 48 Shelf width: 160 shelf length: 600 shelf height: 60 mm electrical connection: 230V / 50Hz / 16A V / Hz. dimensions L x W x H: 0,8 x 0,72 x 1,7 m Tool dispensing system - Warehouse management system Selection through automatic processes Electronic access to definable drawers via warehouse management software -Optimized storage and management of tools Bdjdpfxou Nkz Aj Adiec Storage above the drawers, rubberized, WxD: 720 x 190mm Equipment: Computer HP pro monitor and input device Hand scanner *

Year of construction: 1991, condition: used, Technical details: Pressure capacity: 10 bar volume capacity: 5000 l/min motor capacity: 37 kW voltage: 380 V dimensions L x W x H: 0,9x0,7x1,5 m Equipment: - air cooling - suction opening = 500x400mm On sale as is, without test. Bedpfxju Nzx Ee Adisdc Can be used as spare parts dispenser if necessary. *

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) Bdjdpfxeu Nif To Adisc *

Condition: used, Year of construction: 2008, functionality: fully functional, Automatic Vertical Strapping Machine VR 88 Year of manufacture: 2008 Machine type: VR88 Machine number: 3177 The automatic vertical strapping machine VR 88 is ideally suited for strapping pallets. It is suitable for integration into both powered and non-powered conveyor systems. The lower lance enables the strap to be fed through the pallet. During tensioning, the strapping head moves horizontally to compensate for tolerances, ensuring consistent strap tension and high stability. The system control program allows for single or multiple strapping cycles, depending on the specific packaging requirements of the customer. The machine has been fully overhauled by us and is in fully functional condition. Technical Data Power supply: 230 V / 400 V / 3 Ph / 50 Hz Power consumption: 3 kW Strap types: PP or PET Bdsdox Ta Saepfx Adijc Strap width: 12 mm Strap thickness: 0.6 – 1.0 mm Strap tension: up to 200 kg (optionally up to 500 kg) Seal type: Hot-wedge welding Sealing time: approx. 1 – 3 s, depending on strap type Strap feed speed: 2.5 – 5.5 m/s Strap retraction speed: 2.5 – 5.5 m/s Strap tensioning speed: approx. 0.25 m/s Strap dispenser: 405 mm core Strap frame: 1,200 × 1,600 mm (can be rebuilt for a clearance height of 2500 mm) When installed at the customer site, a 6-month warranty is available.

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Bjdpfx Aszabnzjdiedc Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Year of construction: 2023, condition: used, machine/vehicle number: 0799-250012, TM Minibox by Hartner – The compact solution for maximum tool control Bdsdpfxewpr Tno Adijc Increase your efficiency directly at the workplace: The TM Minibox is the smart, space-saving tool dispensing system for your production. Whether as an entry into digital tool management or as a supplement to your existing infrastructure – with the TM Minibox you take your production to the next level.