Used Ventherm Paint-/ Driyingbox Combined for sale (9,058)

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Kjdpfszkvl Ijx Ag Aodu

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Ksdpfxjzk I U Uo Ag Asdu

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t Kjdpscxxrpofx Ag Aodu stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Kedpfx Agjxc Ni Ro Asdu

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Kedezdc D Sopfx Ag Asdu Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth Kdodpfezi D T Dex Ag Asu ● Workstations for filling, sanding, surface preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Condition: new, Year of construction: 2026, Equipment: cabin, Painting/Spraying Booth The Reinox 300x140 professional painting/spraying booth is designed for partial painting and spraying in production facilities where controlled filtration and safety measures are required in environments with explosive materials (ATEX). Thanks to its powerful extraction system and three-stage filtration, a clean working environment is ensured even during intensive operation. De Dsia Ta Hskryqzeci !! This is always a new machine (photo from customer installations). We are the manufacturer. !! Technical specifications: - Fan is certified for ATEX zone 22 - Extraction area: 3,000 x 1,400 mm - Power supply: 400 V / three-phase - Control: frequency inverter – stepless power control via a potentiometer on the control panel. - Filtration: three-stage filter Certifications & documentation: CE, ATEX, complete technical documentation Ksdpfozkfnrox Ag Ajdu Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 1988, Profile steel shears Peddinghaus Peddycut 275, 6-way combination Immediately available ex works: Profile steel shears Peddinghaus Type Peddycut 275 Year of manufacture 1987 Pressing force 27 tons Table 400 x 250 mm Overhang 90 mm Capacity 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square steel 25 mm Blade length 175 mm Kjdpfozkg Rnox Ag Asdu Punch stroke 24 mm Pierces 20 mm holes in 19 mm or 30 mm thick sheet metal Foot switch Bobmewfdbpsm Av Euedc Various punch dies Transport: ex works

Condition: new, Year of construction: 2026, control type: CNC control, KBA - Combined CNC-controlled press brake / guillotine shear Super-compact machine with a very small footprint. Maximum cutting length: 3,020 mm or 2,020 mm Rated cutting capacity: 6 mm steel sheet / ST 40 Cutting angle: 1°30″ Backgauge for the shear station – adjustment range: 750 mm Table height: 750 mm Maximum bending length between side frames: 3,550 mm or 2,505 mm Maximum pressing force: 1,000 kN Kedpozhklkofx Ag Aodu Working height for bending: only 1,230 mm Stroke range (bending station): 175 mm Maximum installation height (bending station): 350 mm Backgauge adjustment range (bending station): 750 mm Dimensions including operator’s pendant: 4.25 or 3.25 m x 1.82 m x H 2.8 m Required floor space: 3.85 or 2.85 x 1.82 m Drive power: 10 kW Weight: 9,000 kg or 7,500 kg Equipment: - CNC control with touchscreen and 10” colour display, graphical user interface, and automatic bending angle calculation - 1 set of press brake tools (bending punch + four-way reversible die) - Sheet metal supports for the press brake station - 90° angle stop for the guillotine shear with 1 m length - Bending station working area safeguarding via light barriers, rear area safeguarded by lateral safety guards and light barriers Optional: - Front bending area guarding by PILZ® camera monitoring - Rotatable angle stop

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Ksdpfezn I Aasx Ag Ajdu Transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2017, Two RE2 Facelift wood gasifiers, in operational condition, are available. They have already been dismantled and are ready for collection in my warehouse. Kjdpoxuqpvofx Ag Ajdu

Condition: used, Year of construction: 2009, Painting system The system consists of: SORBINI Smartcoater SP1 paint roller coating machine, year of manufacture 2009, approximately 3000 operating hours Roller coating and puttying machine Technical data - Working speed: 5-20 m/min - Workpiece width: max. 1350 mm - Workpiece thickness: max. 100 mm UV lamp control cabinet UV lamps SUPERFICI Model 2UVPLUS65, year of manufacture 1998, on a VENJAKOB conveyor belt, year of manufacture 1998, average number of operating hours 8500 Working area 1.5 - 7.5 m/min. Kodpfx Aezuzrhsg Aedu Max. element width 1300 mm Dimensions (length x width) Lamps with conveyor belt: 5100 mm x 1700 mm (+ 600 mm motors) Rollers: 2200 mm x 2900 mm Control cabinet for UV lamp: 2000 mm x 800 mm Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Drying tunnel for Impregnirka with CM Macchine RMS 40x800 discharge system. Ksdoz Aiv Rspfx Ag Aodu Tunnel length: 7800 mm Width: 310 mm Side material discharge.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,076 h, spindle speed (max.): 10,000 rpm, overall weight: 2,500 kg, total width: 1,263 mm, total height: 1,671 mm, bar diameter (max.): 20 mm, product length (max.): 2,291 mm, number of axes: 5, This 5-axis Hanwha XD20V COMBINED was manufactured in 2014. It features a maximum rotation speed of 10,000 rpm and a maximum working diameter of Ø20 mm. With a robust design and a weight of 2500 kg, this machine is ideal for precision turning applications. If you are looking to get high-quality Swiss type turning capabilities, consider the Hanwha XD20V COMBINED machine we have for sale. Contact us for further details. HANWHA XD20V • 4 Machines Available • Maximum Working Diameter: Ø20 mm • Rated Voltage: 3 Phases, 200/220 VAC • Rated Current: 60 A • Rated Frequency: 50/60 Hz • Ampere Interruption Capacity: 10 kA • Short Circuit Current Rating: 2.5 kA • Operating Air Pressure: 4~6 kg/cm² (3.9~5.9 bar)Machine 1 • Machining Hours (TEMPS USIN.): 43,977 hMachine 2 • Machining Hours (TEMPS USIN.): 42,043 hMachine 3 • Machining Hours (TEMPS USIN.): 34,212 hMachine 4 • Machining Hours (TEMPS USIN.): 22,076 h IEMCA ELITE 220 R 32 LL (Bar Feeders) not included, optional • Manufacturer: IEMCA • Model: ELITE 220 R Kdedpfjzcxgaox Ag Aju • Type: 32 LL • Bar Capacity: Ø32 mm • Air Pressure: 6 bar • Voltage: 200 V • Phase: 3~ • Frequency: 50 Hz • Current: 8.1 A • Interrupting Capacity: 5 kABar Feeder 1 • Year: 2013 • Weight: 630 kgBar Feeder 2 • Year: 2014 • Weight: 660 kg Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 2,900 mm, total length: 1,100 mm, total width: 3,150 mm, working width: 3,000 mm, Manufacturer: Heimer Model: TSW-R 22-22 Year of manufacture: 2007 General / technical data: Used spray booth with dry filter technology (TSW). The spray booth has a modular design and can be connected to an exhaust unit. The filter mats above the paint booth absorb the particles during the painting process within their structure. Due to the modular design, the filter mats can be easily replaced. Kdsdpfszlrrmjx Ag Aju Dimensions (h x w x d): 2900 mm x 3150 mm x 1100 mm

Condition: excellent (used), Year of construction: 2018, For sale is a used Hammer planer machine A3-31 with a planing and thicknessing width of 310 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (fully functional) Technical data: - Planing and thicknessing width 310 mm - 3 cutterblocks (reversible cutter system) - Planing fence swiveling 90-45° - Planing table, dual folding - Thicknessing height 4-225 mm - 4 HP (3kW) motor, 400 volts Kdjdpfxezlthvs Ag Aeu The planer machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer machine, thicknesser, thickness, Felder Reference: R-A33HG

Condition: like new (used), For sale is a used Hammer C3-31 combination machine with a cutting length of up to 865 mm. The machine was only used briefly for demonstration purposes in our workshop. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Jointer/planer width 310 mm - 3 cutterblocks (reversible cutter system) Kedozxdrlspfx Ag Ajdu - Planing height 4-225 mm - Tilting circular saw 90-45° - Sliding table 1250 mm - Miter gauge - 3 motors, each with 4 hp The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, circular saw Reference: R-D1618-37

Condition: new, total height: 31 mm, total length: 46 mm, total width: 37 mm, overall weight: 23 kg, HIGH-PRESSURE PAINT HEATER, ATEX COMPLIANT, VISCOUNT 2 - Brand: GRACO - REF. 245863 - 123 - Viscount 2 Graco, 220 V, 276 bar, 250°C, EEX compliant. - Suitable for general industry, metal, and wood applications. - NEW, UNUSED PRODUCT Kdjdpfx Agszy U Slo Aeu - VAT not included.

Condition: used, For sale is a used Hammer C3-41 combination machine with a cutting length of 2000mm and a Silentpower spiral cutterhead. The machine was used briefly in our workshop for demonstration purposes. Technical specifications: - Cutting length 2000mm Ksdpfx Aozypbzeg Aodu - Cutting width 800mm - Cutting height 103mm - Max. saw blade diameter 315mm - 4 milling speeds - Height-adjustable + swiveling - Silent Power spiral cutterhead - Planing width 410mm - 3 motors, each 4kW - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-A0117

Condition: used, Year of construction: 2015, machine/vehicle number: 315031/02, working width: 1,800 mm, workpiece length (max.): 3,000 mm, workpiece height (max.): 25 mm, TECHNICAL DETAILS Workpiece dimensions Maximum length: 3,000 mm Minimum length: 400 mm Maximum width: 1,800 mm Minimum width: 200 mm Maximum thickness: 25 mm Minimum thickness: 3 mm Maximum deflection: 1 mm Maximum paper roll diameter: 500 mm Paper web width: 1,980 mm Maximum working width: 1,800 mm MACHINE DETAILS Minimum temperature: -5 °C Operating speed: 0.8–2 m/min Voltage: 400 V Frequency: 50 Hz Pressure: max. 6 bar EQUIPMENT Roller conveyor TVR18/2000 Kdedpfxszypm De Ag Asu Working width: 1,800 mm Speed: 0.35–6.1 m/min Roller diameter: 66 mm Roller spacing: 125 mm

Condition: used, Used Item Description: Kjdpfxozyyzrs Ag Asdu - On wheels - Number of compartments: 20 - Compartment width: 7 cm - Usable height: 236 cm - Dimensions: 255x225x80 cm

Condition: used, Used Item Description: - on wheels - Number of compartments: 20 - Compartment width: 7 cm - Usable height: 236 cm Kodpozyyz Sjfx Ag Asdu - Dimensions: 255x225x80 cm

Condition: excellent (used), Year of construction: 2019, VIDALI painting system Spray booth with overhead conveyor. Ksdpozx Rxxjfx Ag Ajdu

Condition: used, National FXTC Combined Pointer + Thread Roller Year: 80's Capacity (mm): M8x80/100 Thread Die dimensions (mm): 115/130x80 Ksdpfxszxqidj Ag Aodu Parts/min (max): 300

Condition: new, functionality: fully functional, machine/vehicle number: G30W55, overall weight: 34 kg, operating pressure: 207 bar, compressed air connection: 7 bar, 30:1 Merkur pump: - Wall-mounted - Includes suction hose and material filter Ksdozwb Hwepfx Ag Aedu - Permissible material operating pressure: 207 bar - Max. material flow rate: 4.5 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Notes on the sale: Sale exclusively to business customers. No sale to private customers. Sale and delivery exclusively within the EU – no sale to non-EU countries. Delivery terms and shipping costs will be determined individually based on effort and agreement. The sale is made without any warranty.