Used Vffs Line for sale (10,125)

Condition: used, Door panel postforming line Note: The line began series production in 2022; at this point, all machines were technically synchronized and, if necessary, overhauled. Door panel postforming line consisting of: Portal loading system Manufacturer: Kraft Year of manufacture: 2019 Technical data - with vacuum lifter - 2 infeed roller conveyors - one transport roller conveyor for further transport Wide belt sanding machine Manufacturer: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 consisting of: Wide belt sanding machine, sanding from below Technical data - contact roller - electronic shoe sanding unit - cleaning brush - intermediate transport belt, length approx. 3000 mm Wide belt sanding machine, sanding from above Technical data - identical equipment Complete formatting, laminating and postforming line consisting of: Roller conveyor system Manufacturer: Kraft Year of manufacture: 2019 Technical data - 3 individual elements - centering station Double end profiler Manufacturer: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical data - equipped with infeed conveyor and aligning station - saw unit below - trimming unit - edge trimming unit - prism milling cutter - joint milling cutter - cross edge milling unit - 3 profile milling units - brushes Laminating line consisting of: Infeed conveyor Manufacturer: Kraft Year of manufacture: 2019 Glue application machine Manufacturer: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical data - mechanically overhauled in 2018 - control system completely overhauled in 2022 - with infeed table, manufacturer Kraft - steel platform with stairs and various pumps - glue melting unit GWK Eco 03A Infeed table for laminating line Manufacturer: Kraft Year of manufacture: 2019 Laminating line Manufacturer: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical data - new Siemens Simatic KMG Touch control system - Bürkle GLK press calender - incl. film holder and saw for overhang - working width 1300 mm - 2 temperature control units GWK - column swivel crane for loading paper rolls - extraction conveyor Postforming line Manufacturer: Homag Technical data - infeed table - with 2 saw units, horizontal and vertical - intermediate buffer with 4 levels - infeed to the postforming machine - 2 identically constructed processing sides with glue application - PU pre-melting unit Nordson / VersaBlue, year 2020 and 2004 - pressure zone with revolving magazine for various profiles - various milling units and flap brushes - 2 cooling units BEKO Bekoblizz LC, year 2020 Belt conveyor with inspection system - swivel arm with vacuum suction cup - inspection station for optical inspection of the workpiece Portal destacking system Manufacturer: Kraft Technical data - with vacuum portal and 3 destacking stations Isdpfx Anjzuziys Hoif Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm Iiodpfxszuzhis An Hef - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Iodpfx Anjzuzg Ss Hjif Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Iedpjzuzg Ejfx An Heif Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Ijdpozuzfbsfx An Hjif Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Isdpfx Aszuyxgsn Heif Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: used, Year of construction: 1997, - Feeding and transport - Milling machine combination with glue application - Transfer station - Infeed station - End face press with stacking Dovetail tenon machine Manufacturer: Grecon Year of manufacture: 1997 Space requirements for operation and maintenance Length 18500 mm Width 6500 mm Height 2000 mm Weight and floor load Total weight 10500 Kg Floor load dyn. 25 N/cm² Wood data Wood type: Softwood or hardwood Length (min/max) 150 / 2000 mm Width (min/max) 50 / 205 mm Height (min/max) 35 / 50 mm Output length (min/max) 3000 / 6000 mm Machine components Feeding and transport Conveyor belt Type: FB 600 / 1000 Powered conveyor belt with fixed and foldable side guides and a retractable stop for aligning the packages. Technical data Length 1100 mm Width 950 mm Height 1000 mm Power consumption 1.1 kW Feed speed 75 m/min Milling machine Turbo milling combination Type: FDL-F-205/600/500 Two combined milling machines in a heavy-duty design with adjustable tables as workpiece supports, guided by a stable combined ball bearing and roller guide. Each milling machine is equipped with a clamping station, the trimming unit, and the milling unit. Either the second milling machine or both milling machines are equipped with a glue application system. The milling machines can be equipped with a scoring saw. Belts between the milling machines minimize package transport times, thus achieving a fast throughput. A pneumatic vibrating device in the clamping station ensures even alignment of the wood. Horizontal and vertical pressure devices clamp the package. The trimming unit is used to cut a reference edge on the workpiece. This reference edge determines the length of the respective dovetail tenon profile and can be adjusted. The dovetailing is carried out by the milling unit, followed by glue application via a side jet or roller applicator. Technical data Iedpezuyw Asfx An Hoif Power consumption 63 kW Compressed air consumption 350 NL/min Exhaust diameter 2 x 250 mm Exhaust volume 10600 m³/h Drive Motor 1: Table feed, milling table Manufacturer: SEW Power consumption 1.5 kW Speed 71 rpm Motor 2: Belt drive Manufacturer: SEW Power consumption 1.1 kW Speed 227 rpm Motor 3: Trimming unit motor Manufacturer: Walter Power consumption 5.5 kW Speed 2880 rpm Motor 4: Milling spindle motor Manufacturer: Behnke Power consumption 22.0 kW Speed 3000 rpm Transfer Transfer station Type: ÜL WB 600/1000 Transfer station designed in a robust welded construction with an infeed belt, alignment stop, cross-feed unit, turning device with turning brush, and an outfeed belt, as well as adjustment devices for optimal adaptation to different wood dimensions. The packages of workpieces, which have been milled, are transferred from the milling table of the dovetail tenon milling machine to the conveyor belt of the transfer station and aligned flush with a stop. The aligned wood package is moved transversely to the infeed direction into the area of the turning device by the cross-feed unit. The separation of the wood package is carried out either directly onto the outfeed belt or by turning it 90 degrees and aligning it with a fixed edge. The discharge edge can be adjusted to the wood dimension. The separated wood is transported to the infeed station via a fast-moving conveyor belt. Technical data Power consumption 2.5 kW Compressed air volume 12 m³/h Feed speed 75 m/min Infeed station Infeed station Type: EKK 205 Infeed station with a side chain guide for transporting the separated pieces of wood.

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min Iedozuyqvspfx An Hjif - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Iodpfxezuypxj An Hsif Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. Iiodezuynhopfx An Hef The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Isdpjrn Swkefx An Heif Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German Iisdpfx Anezuk Tnj Hef The machine was originally used for biomaterials

Condition: used, KRONES ROUND GLASS LINE 500/600BPM 700ml, 750ml, 1 Litre STORK MINIATURE LINE 200 BPM 50ml Glass & PET BERTOLASO LINE 200BPM 200ml, 300ml, 375ml, 500ml Glass & PET STORK GLASS LINE Iiedpszrf A Eefx An Hof 200BPM 350ml, 700ml, 750ml, 1.14 Litre

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We are offering this Hebbecker S-LINE screen printing machine in very good condition, manufactured in 2022. Manufacturer: Hebbecker Model: S-LINE Year of manufacture: 2022 Iiedpezu Nxcefx An Hef Condition: very good Type of machine: screen printing machine This is a complete set consisting of a carousel specifically designed for tote bags, with an automatic ejector and a tunnel. Electric rotation, pneumatic screen locking, 8 stations/3 printing positions. 1 flash pre-drying unit, 1 pneumatic tensioning system for securing the tote bags. SIEMENS automatic ejector integrated into the tunnel entrance. Purchase value in 2022 - net price €112,000.00 - new condition, very little use. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2006, A production line with 3 KUKA KR 150-2 industrial robots for the production and handling of molded parts is offered. Rated payload per robot: 150kg, max. reach: 2700mm, 6 axes, pose repeatability: +/-0.06mm, protection rating: IP65, mounting position: floor/ceiling, axis speeds: A1: 110°/s, A2: 110°/s, A3: 100°/s, A4: 170°/s, A5: 170°/s, A6: 238°/s, motion ranges: A1: +/-185°, A2: 0° to -146°, A3: +155° to -119°, A4: +/-350°, A5: +/-125°, A6: +/-350°. Including peripheral equipment and accessories. Weight per robot without controller: approx. 1245kg. The production line was used, among other applications, for the production of plant containers and is ideally suited for processes involving plastics as well as processed fiber-based bio-residues and residual materials. It is particularly designed for molding, pressing, handling and automation processes. Inspection by arrangement. Iijdpfx Anszu Ndxe Hef

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 Iisdpfx Aezvc R Uen Hjf MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Condition: ready for operation (used), Compact Dovetail Joint Machine Capacity: approx. 4-6 joints/min. For wood sections with the following dimensions: Thickness: 30-120 mm Width: 75-250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, designed for processing PUR glue. Spring-mounted with a safety cut-out that immediately stops the milling and glue application feed in case of even the slightest load. Iiodpfxezmmr Re An Hsf All parts are chrome-plated. Electrical system with PLC Milling motor power: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 Amperes

Condition: excellent (used), Silverson 275 LS High Sheer In Line Mixer / Homogenizer Ijdpfeym Akkex An Hoif 1.5" Inlet & Outlet 3 ~ Removed from the stores of a pharma plant in Cork, Ireland. Device is in excellent condition.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, The machine is being sold on behalf of the owner. The current owner will perform one more maintenance service for the new buyer. The machine has been used very little and has so far only packaged 6,547 units. It is ideally suited for packaging various loose food products, such as: Coffee Spices Rice Tea Iodezvd A Sjpfx An Hoif and much more. Since the machine is no longer needed, it is now for sale. An inspection and functional test can be arranged at any time. Condition: technically perfect, only slightly dusty. Location: 04668 Großbardau If you have any questions or are interested, please contact us by phone: Tel.: 0152 / 31381635

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Iiodpjzr Iwrofx An Hof Pre-Auction Offers Considered Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), functionality: fully functional, For sale is a special-purpose machine—a complete production line for manufacturing heating elements. The production line was designed and built by Bosch itself. The heating elements are suitable for use in instantaneous water heaters. You can see an image of these elements in the second picture of the gallery. The production line also includes a testing station. According to our checks, all required documentation is available. Transport and loading can be organized throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you. Iiedpfxszvfiye An Hjf Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Are you looking for a high-quality yet cost-effective machine for your production? Or are you looking to sell your equipment? For more information or contact options, please reach us via the contact form.

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device Iedpfx Asx Ari Hjn Hjif 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: refurbished (used), Year of construction: 2003, Seewer Rondo Croissomat SCMG for the production of filled and unfilled croissants, the pneumatic filling depositor deposits soft to firm fillings in two to four rows. It even processes fillings with small pieces of fruit or vegetables without difficulty Iiedpfx Anjwgwwgj Hsf year of build 2003 for filled and unfilled croissants laminated and non-laminated doughs up to 900 unfilled croissants per row per hour (max. 4.500 units), two to five rows up to 700 filled croissants per row per hour (max. 2.800 units), two to three rows calibrator year of build 1997 pneumatic filling depositor year of build 2006 usable dough-sheet width approx. 530 mm speed of conveyor belt 9 m/min 1 stamping knife is included, additional stamping knives are available on request pictures BEFORE reconditioning

Condition: refurbished (used), Year of construction: 2008, Rademaker Crusto Bread Line 600 mm. The Rademaker Crusto Bread Line is a versatile production line for manufacturing a wide range of artisan bread products. Designed for gentle dough handling and consistent product quality, this line combines dough sheeting, gauging, folding, cutting, topping and product transfer in one efficient production process. The line is equipped with a fully automatic Siemens PLC control system with colour touchscreen, allowing quick recipe selection and easy operation. Thanks to its modular design, the line can produce various bread products with high flexibility and consistent results. year of build 2008 suitable for production of Ciabatta Folded bread Artisan baguettes Coffee bread (Kranssi) Muhku Niittypitko Various folded and topped bread products main features 600 mm working width X-Pack dough sheeting system Multiple flour dusting stations Quick reducer gauging station Two-roll gauging station Cross roller Dough lane spreading conveyor Folding module Guillotine cutting module Iiedpfxozub Rqj An Hjf Diagonal baguette cutter Water spray unit Universal topping module Retracting belt Siemens PLC with colour touchscreen Recipe management Capacity Muhku – up to 10,000 pcs/hour Ciabatta – up to 7,200 pcs/hour Folded bread – up to 4,800 pcs/hour Coffee bread Kranssi – up to 2,000 pcs/hour Niittypitko – up to 2,000 pcs/hour Capacities depend on product dimensions, configuration and dough characteristics. Technical specifications Working width: 600 mm Voltage: 3 x 400 V + N + PE, 50 Hz Control voltage: 24 VDC Power consumption: 21.9 kW Average air consumption: 196 Nl/min Maximum air consumption: 548 Nl/min Dimensions: approx. 21,000 x 3,000 x 6,000 mm

Condition: used, Year of construction: 2009, Overview This LM S.p.A. multiline divider is a lane-dividing system for bottle conveying, built in 2009 by LM S.p.A. (Modena, Italy). It sorts a single-lane bottle stream into up to 4 lanes and is offered together with a bottle conveyor system manufactured by GEA Procomac - 4 lanes with each approx. 10m multiline conveyors plus the divider unit. The system is still installed and under power in a German water and soft-drinks bottling plant, remains in production until 30 September 2026, and can be visited in operation. Technical data - Manufacturer of multiline divider: LM S.p.A. (Modena, Italy) - Manufacturer of bottle conveyors: GEA Procomac - Year of manufacture: 2009 - Machine type: multiline divider with bottle conveyor system - Lane division: up to 4 lanes - Capacity: min. 12,500 bottles per hour - Conveyor length: approx. 4 lanes each 10m (multilines) plus divider Scope of delivery - LM S.p.A. multiline divider - GEA Procomac bottle conveyor system - Drive units, guide railings and safety guards as installed Condition Iedpfx Ajzuc Rxon Hjif The equipment is in very good condition. It is still installed and under power and remains in production until 30 September 2026; operation can be demonstrated on site. Availability Available from 7 October 2026. The equipment will be dismantled and loaded onto the buyer's trucks by the seller between 7 and 10 October 2026. Location: Germany.