Used Vibrating Feeder for sale (4,606)

Condition: used, Year of construction: 2013, operating hours: 11,801 h, functionality: fully functional, total length: 4,500 mm, total width: 1,530 mm, total height: 1,100 mm, overall weight: 1,500 kg, We are offering this used Breuning IRCO SIMAC 50.1 bar feeder, manufactured in 2013. We have a bar loader available: Breuning SIMAG 50.1. It was previously connected to a TWIN 42 machine. Isdpfxjztqq Rs Anyetk Here are some details: Year of manufacture: 12/2013 Operating hours: 11,801.5 hours Accessories: Collets 14, 17, 32, 38, 46 If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), functionality: fully functional, gearing type: automatic, fuel type: electric, color: green, operating hours: 1,000 h, NEW OFFER "BARGAIN" Aggregate crushing and screening plant; the unit includes: - Primary hopper: 70m³ Itedpfx Anet N Iwtoysk - Secondary hopper: 80m³ - Hazemag vibrating pre-screen feeder, 30 HP motor - Rover pre-screen feeder with 8 HP motor - Guerrero jaw crusher 1000x800 with 100 HP motor - Hazemag impact crusher model APK-30 with 120 HP motor - Alli Charmets vibrating screen, single deck, 3m² effective screening area, 5 HP motor - 15 Tusa-Siem conveyor belts with integrated motors and gearboxes, various lengths and sizes - Electrical distribution cabins: 2.5 x 3m - Control cabin / control panel Transport: the complete plant requires approximately 6–8 trailers SPECIAL DEAL

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 332/18, Plastic regranulation line prepared for processing both film flakes and regrind. Machine capacity: 800–1200 kg, depending on the material. Equipment: 1. Forced feeder 2. 160/54D extruder with two independent degassing zones 3. Cutting system on head, model OR1000 4. Centrifugal dryer 5. Vibrating sieve 6. Additional plasticizing unit (screw + cylinder + feed hopper) Not included in the offer: 1. Automatic mesh filter GB1000 (equivalent to Britas ABMF1050-09) Itodpfx Asy N T Uyonyek

Year of construction: 2010, condition: excellent (used), functionality: fully functional, vibrating feeder RNA 700mm bowl feeder RNA trough vibration feeder + linear feeder, with controller. 50 Hz nominal vibration frequency with double speed control Manufacturer: RNA Type: ESK-N80 trough diameter: 700 mm voltage: 220 volts 50Hz protection: ip30 vibration: 3000 c/min vibration regulator: RNA Itedpfx Ajh S Il Tjnyek adjustable height stand +linear dosing unit length: 1520 mm

Condition: excellent (used), Year of construction: 1999, total height: 645 mm, total length: 2,100 mm, total width: 3,240 mm, overall weight: 3,800 kg, DESCRIPTION: For sale: Friggi 1 MF 420 ACN automatic band saw, a benchmark for reliability and precision in the mechanical industry. This heavy-duty machine is designed for intensive cutting of solids, profiles, and bundles. Equipped with CNC control, it is the perfect solution for high-productivity environments requiring minimal operator supervision. Ijdey Ib Avspfx Anyotk Key Features: Cutting Capacity: Rounds and squares up to 420 mm (bundle cutting: 420x330 mm). Integrated Automation: CNC-programmable cutting cycles and automatic feeder for series production. Structural Precision: High-rigidity twin-column design prevents vibration, ensuring extended blade life and perfectly square cuts. Variable Speed: Electronic blade speed adjustment (18–80 m/min) adapts to various steel grades and alloys.

Year of construction: 2019, condition: used, Make: FELSS, Model: CBC, Year: 2019, Serial No.: 18-2112B, Bending capacity Ø 3.2 x 0.7 mm - 14 x 2.0 mm, max. tube length 1,200 mm, 2 bending units, PC control with touch display, operator console, double-deck feeding system, loading station, robot, make Yaskawa, type YR-MA1440/MH12-A00, robot controller, type DX200, teach-in terminal, small parts feeding system with loading bunker, vibrating feeder bowl, singling unit, removal/alignment station, box outfeed line L 7,000 mm, box size 350 x 250 x 150 mm, control cabinets, protective fence/plexiglas enclosure, component provision platforms/shelves. Itodeyx Ev Uopfx Anysk

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Itjdezm Hr Repfx Anyek Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm Itsdpjx Ndu Dofx Anyok • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Itjdpevllbrefx Anyek Spindels bore 42 mm IRCO feeder bar All manuals and documentation available

Condition: good (used), Year of construction: 2001, Year: 2000/2013 Ijdpfx Anjzg E Idoyjtk Since rebuilding by Müller Martin only 5.600 Consisting of: Gathering machine Müller Martini 3681 Description: - Chain tensioning station - Number of gathering stations: 8 - ASIR Automatic Signature Image Recognition - ASAC automatic self adjusting calliper - Pump - Set up element: 3641 - Reject gate for incomplete products:3617 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C18-41 Year: 2001/2014 Description: - 31 clamps - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine has centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2st spine glue system - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device - Quako-quality control New in 2013 Transport system New in 2013 - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Semi automatic setting - Left hand infeed - Precounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Book stacker Müller Martini CB 12 Description: - Compensating stacker - Delivery to the left Option not in price included - Stream feeders - Müller Martin 3605 book block saw with turnoverbelt - Palletizer

Condition: excellent (used), functionality: fully functional, Working dimensions: 230x160mm Spindle configuration: 1. Lower 15kW – Powerlock 2. Right 15kW – Powerlock 3. Left 15kW – Powerlock 4. Upper 22kW – Powerlock 5. Lower 15kW – Powerlock 6. Upper 30kW – Powerlock 7. Lower 15kW – Powerlock Feed drive - 7.5kW Spindle speed 12,000 rpm Pneumatic pressure rollers for the infeed Feed drive on cardan shafts Smooth feed speed adjustment 6/36 m/min Automatic lubrication of the table Table made with MaratonCoating technology Control system: PowerCOM with motor control in Polish Soundproof cabin VibroControl vibration sensor Year of manufacture: 2010 Itedjzi Tz Repfx Anysk Highnech E1 feeder, 2010 Infeed rollers driven by a 7.5 kW hydraulic pump.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Iodozvfr Uspfx Anyotk FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2017, CATALOGUE NUMBER 8014 TECHNICAL DATA - inlet width 540mm - inlet height 260mm - roller width 560mm - roller diameter 590mm - number of knives on the roller 4 pcs - feed rollers, geared, top and bottom 2x4kW - screen 40x35mm - electric auto-reverse (adjustable) - reverse gear - vibrating feeder 2.2kW Iodpoza Tvdjfx Anyetk - vibrating feeder length 6000mm - vibrating feeder width 500mm - capacity approximately 12-16 m³/h (depending on the type of material being shredded and the screen opening) - main motor 75kW - automatic hydraulic lifting function for the upper feed roller - overall dimensions of the vibrating feeder 6000x950x1600mm - overall dimensions of the machine L/W/H 3400x1700x2000mm - total weight approximately 6000kg ADVANTAGES - vibrating feed table 6000mm - electric auto-reverse (adjustable) - reverse gear - manufactured by the Polish brand OSKA - electrical diagram, DTR documentation + CE - unpainted - used shredder, very good condition Net price: 179900 PLN Net price: 42834 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to higher fluctuations)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. Itsdpfx Ansx R N Urjysk The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022 but was never in production. It features a table size of 1,400 x 670 mm and a rapid traverse of 30 m/min in both X and Y axes. The machine is designed for heavy-duty milling with box guideways for maximum rigidity. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • As new, showroom model • Table size: 1,400 x 670 mm • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off • Maximum height when the Z-axis is fully extended: 3107mm Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) • basic package of tool holders included • no bar feeder included (can be purchased optional, price upon request) • no chuck included • retrofits possible (price upon request) Itjdpfx Ajzn Uqqonyek Technical Specification Taper Size ISO 40

Condition: used, Field of application: Mining Introducing the formidable mobile crushing and screening plant on wheels by Polygonmach, a blend of power, innovation, and versatility. Designed to withstand challenging conditions and deliver exceptional results, this mobile crusher is an exceptional choice for any high-volume crushing and screening application. Our design, built in a two-chassis format, combines optimum functionality and power in a compact yet robust package. The first chassis is equipped with a vibrating feeder, PJC-110 Primary Jaw Crusher, bypass conveyor for soil extraction, feeding conveyor, and wheeled mobile chassis with hydraulic legs. Our Dust Removing System ensures your operation stays clean and efficient, demonstrating our commitment to both productivity and the environment. The second frame is fitted with a METSO HP 300 cone crusher, vibrating screen with 3 or 4 decks, feedback conveyor from vibrating screen to cone crusher, and fold-up type stockpile conveyors. This frame, too, comes with wheeled mobile chassis, ensuring easy transportation and positioning. Boosting a total motor power of 500 kW and an electric generator requirement of 700 kVA, our system provides an impressive production capacity of 250-300 tph, with a maximum feeding size of 1100*850mm The convenience of a 4.5 meters feeding height adds to the seamless operation of this powerful system. Further showcasing our attention to detail, the system comes with a state-of-the-art Automation System featuring PLC and a remote controller for easy and efficient operation. With the additional optional diesel electric generator set, this plant is fully prepared to meet all your operational needs. Itsdjx D A Hrepfx Anyek Technology: jaw Mobility: mobile Other characteristics: primary, compact Capacity: Max.: 300 t/h(184 lb/s)Min.: 250 t/h(153 lb/s) Motor power: 500 kW(679.81 hp) Opening height: 1,100 mm(43.3 in) Opening lenght: 850 mm(33.5 in)

Condition: like new (used), 100 Pcs. Feeders with Magnetic Vibrators and Unbalance Motors. Find our complete stock on our website. Different widths and lengths. With different vibrators from quality manufacturers like Aviteq / AEG, Jöst, Friedrich, UHDE, Vibra, Honert, Herweg. Also in stainless steel or for example covered with ceramic or rubber. Iodpfxoggfizj Anyotk Please contact us to find a suitable feeder for you.

Condition: used, Field of application: Mining Feeders and screens are paramount. Polygonmach stands at the forefront, offering a wide range of equipment designed to meet your specific needs: Vibrating Feeders, Pan Feeders, Grizzly Feeders, Scalper Screens, Apron Feeders, and Wobbler Feeders. Polygonmach’s Vibrating Feeders are engineered to ensure a steady flow of material to the crushing or screening machine. They deliver high efficiency, reliability, and precision, ensuring your operations run smoothly and effectively. Similarly, Polygonmach's Pan Feeders are known for their rugged design and durability, designed to withstand harsh conditions while providing reliable performance. They are perfect for handling the toughest materials, including large, heavy, and sharp rocks and ores. Meanwhile, Grizzly Feeders are indispensable in the initial stages of crushing processes, particularly in mining applications. They are engineered to handle large, heavy materials, ensuring a continuous, regulated feed to crushers, reducing load and improving efficiency. Polygonmach’s Scalper Screens are designed for high-capacity screening, separating the fine materials from the feed before they reach the crushing stage. This improves efficiency and extends the lifespan of the crusher. Apron Feeders, renowned for their robust design, are ideal for handling heavy, lumpy, and abrasive materials. They provide a controlled flow of materials to prevent choking of crushers or conveyors. Lastly, Wobbler Feeders are used for raw material processing in industries like mining and recycling. They ensure a continuous and even material flow, reducing wear and tear on downstream equipment. Technology: jaw Iedjx D A Naopfx Anyetk Mobility: stationary Other characteristics: high-capacity, fine Capacity: Max.: 500 t/h(306 lb/s)Min.: 80 t/h(49 lb/s) Motor power: Max.: 9.8 kW(13.32 hp)Min.: 3 kW(4.08 hp) net weight: Max.: 26,000 kg(57,320.19 lb)Min.: 8,000 kg(17,636.98 lb)

Condition: good (used), Year of construction: 2001, Format: max 360 x 310 mm; min 140 x 100 mm Book block thickness: max 60 mm; min 3 mm Cover format: max 642 mm; min 203 mm Output: max 18,000 c/h Equipment Gathering machine - Clamping element - 18 feeder 3681 - Diverter 3714 Itjdpfx Aneq Rv Htjyok Controls - Double and missing sheet control - ASAC automatic self-adjusting caliper Intermediate modules - 2 vibrating elements 3642 - coupled with adhesive binder - Commander - 41 clamps - Infeed channel with vibration direction - 2 milling stations - 2-fold combi spine processing - 2 hotmelt spine gluing units - Hotmelt side gluing unit - 3 premelters - SF shingle cover feeder - SF cover pressing - 2nd SF cover pressing unit - Plate chain Laydown conveyor Cooling section - inline with - Zenith S three-knife trimmer Optional accessories---not included in the scope of delivery-- - compensating stacker - film wrapper - palletizer

Condition: reconditioned (used), Year of construction: 2003, Complete plant designed for exceptionally hard and abrasive stone. Primary crushing unit: Baxter double-effect jaw crusher, 50x36 inches. New jaws. Electric motors. The entire unit has been inspected and refurbished in the workshop and is in perfect condition. Vibrating pre-screening feeder, 1400x6000 mm. Hopper with a capacity of 40 m3. Mounted on a bolted metal structure. Svedala 16-45 rotary crusher. Asteca 2500x6000 mm, 3-deck screen. Conveyor belts, etc. Itedpfx Anoim D Uujysk

Condition: good (used), Year of construction: 1993, Year: 1993 Consisting of: Gathering machine Müller Martini 210 S Description: - Chain tensioning station - Number of gathering stations: 18 - Pump - Set up element - Intermediate element with vibrating Side stitching unit - Transfer into the binder Perfect binder Müller Martini Normbinder Description: - 20 clamps - Main milling station - 1st spine preparation station - Excluding dust extraction system - Base for 1st spine glue system - hotmelt spine glue unit, interchangeable - Premelter for spine glue unit - Base for side glue system - Hotmelt side glue unit, interchangeable Iodezg Hdyspfx Anystk - Premelter for side glue unit - SF Stream cover feeder - Scoring station - Pump - SF Nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Semi automatic setting - Right hand infeed - Precounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Option not in price included - Stream feeders - book bloc feeder - Gauzing station - Palletizer

Condition: reconditioned (used), Year of construction: 2005, Larom model Lau 8 hammer mill Inlet: 1650x700 mm Iedpfx Ajim Eansnyetk Electric motor Mounted on a chassis, with adjustable hopper and vibrating feeder.

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm Iedox Elkfepfx Anystk W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2018, We offer a used SchurStar 2060-C packaging system—an industrial packaging machine designed for filling and sealing pre-made bags in production and packaging processes. The machine is designed for flexible packaging of food, industrial, pharmaceutical, and chemical products. The SchurStar 2060-C model allows for operation in either manual or automatic filling mode. The system feeds bags continuously or intermittently, depending on the product type, packaging format, and production process organization. As a result, the machine can be used for smaller production batches as well as in medium- or high-throughput lines. The SchurStar 2060-C is designed for short changeover times and to minimize packaging material waste. The machine can handle various types of packaging materials, such as PE, CPP, co-extruded films, and laminates. The system is suitable for packaging products that require aesthetically pleasing, consistent, and leak-proof packaging. The AISI 304 stainless steel construction facilitates hygiene maintenance and allows the machine to be used in food processing facilities. The system can be equipped with additional modules, such as feeders, hoppers, an air extraction system, a compression unit, a bag vibration system, gas flushing, marking, or labeling. Technical Specifications: Manufacturer: Schur Technology a/s Model: SchurStar 2060-C Type (as per nameplate): Y30054 Year of manufacture: 2018 Standard: EN 60204-1 Construction: AISI 304 stainless steel Power supply: 3 × 400 V + N + PE, 50 Hz Rated power (according to catalog data): 3.5 kW Maximum circuit breaker rating: 16 A Load: 10 A Ikmax: 15 kA Grounding: TN-S Air supply pressure: 700 kPa Air consumption: 140 l/min Bag feed speed: 3–30 m/min Continuous-duty output: up to 80 bags/min, depending on the product and bag format Intermittent-duty output: up to 35 bags/min, depending on the product and bag format Format changeover time: 4–5 minutes Maximum bag dimensions: width 450 mm, length 500 mm Minimum bag dimensions: width 100 mm, length 100 mm Packaging material: PE, CPP, coextruded films, laminates Material thickness: 0.040–0.140 mm Weight: approx. 650 kg CE marking: yes Key advantages: packaging in pre-made SchurStar bags capability to operate in manual or automatic mode continuous or intermittent bag feeding throughput of up to 80 bags/min in continuous operation quick format change in 4–5 minutes low packaging material waste AISI 304 stainless steel construction capable of handling various packaging materials suitable for producing small, medium, and large batches Itedpfezhwivex Anyek can be integrated with additional packaging modules renowned manufacturer Schur Technology Applications: packaging of food products packaging of non-food products packaging of pharmaceutical products packaging of chemical products packaging of bulk, portioned, and

Condition: good (used), Year of construction: 2001, Year: 2001 Size max 510 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3681 Description: - Chain tensioning station - 22 gathering stations - 20 gathering feeder 3681 - ASIR Automatic Signature Image - ASAC automatic self adjusting calliper - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book block feeder base with feeder - 1x 3643 Intermediate element with vibrating - Transfer into the binder Perfect binder Müller Martini Corona 3010 C15 S-31 Year: 2000 Description: - Semi automatic setting - Commander - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Base for 2nd spine glue system Ijdpfx Aozhukwonyjtk - PUR spine glue unit, interchangeable - Stream cover feeder - Scoring station - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 60 meters - Escape delivery Book block splitter Müller Martini 3501 Year: 2000 - Bypass belts - turn over belt Three knife trimmer Müller Martini 3672 Zenith Year: 2001 Description: - Semi automatic setting - Left hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Book stacker Müller Martini 3631 CB 16 Description: - Compensating stacker - Delivery to the left and right Condition Available immediately The machine is fully visible during operation