Used Weinig Opticut S75-1 for sale (78,053)

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. Lrsdpfxsxb U Txo Akysk -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor Lrodexftvajpfx Akyjk -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: excellent (used), - Number of spindles: 4. Ljdpsygy Tpsfx Akyjrk - Planing width: max 120 mm. - Planing height: max 100 mm. - Motor power: typically 4 x 3 kW. - 4 feed speeds - Spindle diameter: 30 mm.

Condition: used, Year of construction: 1980, with 7 shaftswith unispindleusedWeinigtype U17Ayear of construction 1980machine . 11881959spindle arrangement u-re-li-re-o-u-unimotors 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kWplaning width approx. 170 mmplaning height approx. 120 mmspindle diameter 40 mmpneumatic pressure of the rollersinfeed before the planerfeed speed infinitely variablesuction connection 7 x 120 mmspace requirement approx. 5200 mm x 1400 mm x 1500 mmweight approx. 3000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as is, as inspectedwithout guarantee and warranty Ledpfx Aksvwfqdjyork

Condition: used, Technical data: Max planing width: 170 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle sequence: bottom 4 kW right 3 kW left 5.5 kW right 5.5 kW top 5.5 kW bottom 4 kW Each spindle driven by a separate motor Number of upper steel feed rollers: 7 Number of upper rubber feed rollers: 2 Stepless feed speed adjustment – 4 kW Lrodsyhndrspfx Akyok Feed by chains Lubrication pump for worktable Pressure: 6 atm. Electric raising of the machine body Power supply: 400 V Total power: 33 kW Overall dimensions: Length: 5000 mm Width: 1300 mm Height: 1560 mm

Condition: good (used), Year of construction: 2010, Weinig Conturex C126 CNC Window production machine Description; Year of construction: 2010 Working width 40-260mm Working heigth 25-150mm Powergrip clamping table Table loading length single table 4 x 2280mm Workpiece length single table cycle 220-2700mm Table loading length double table (combined) 2 x 4630mm Workpiece length double table cycle without follow up 220-5000mm Ledpfxsx Tq I Ej Akyerk Workpiece length double table cycle with follow up 5000-6000mm Fully new PC & Software 2025 Full description on request Available approx. summer 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 1982, WEINIG Four side planer, 5 heads Lrodpfx Akjicbhvjyek PM 17 machine no. 1329-2356 year of manufacture: 1982 planning width 170 mm planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm infeed table length 2000 mm with planer heads 6 spindles arrangement: 1 bottom 4 kW 2. right 3 kW 3. left 5,5 kW 4. top 5,5 kW 5. bottom 4 kW / universal spindle diameter approx. 35 mm infeed speed 6,5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads dimension 4500 mm x 1300 mm x H 1500 mm Weight appr. 3800 kg technical specification under subject of correction

Condition: used, working length 3600 mm Working width 1500 mm Working height ca. 900 mm WEINIG Return Conveyor System RF15 ----- Can be used after moulders, planers, and milling machines with a Lrodpjxpn Tnjfx Akysk maximum feed speed of approx. 22 m/min. Technical Description: Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!)

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, WEINIG four-sider U17A, year of manufacture 1982 with 7 spindles with universal spindle used Spindle arrangement: bottom-top-left-right-top-bottom-universal Motors: 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kW Planing width approx. 170 mm Planing height approx. 120 mm Spindle diameter 40 mm Pneumatic pressure of the rollers Infeed before the jointer Lredpfx Aox Sqdkskyok Continuously variable feed speed Extraction port 7 x 120 mm Space requirement approx. 5200 mm x 1400 mm x 1500 mm Weight approx. 3000 kg

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Ljdjx Rbkxopfx Akysrk Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: excellent (used), Year of construction: 1979, working width 250mm working height 140mm Lrsdpex Sw T Ssfx Akyek 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 870-5805, working width: 170 mm, planing height: 120 mm, planing width: 170 mm, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 170 mm, number of spindles: 7, feed roller diameter: 140 mm, Width of the work piece to be processed 20-170 mm Thickness of the work piece to be processed 10-120 mm Length of the work piece to be processed L min 750 mm Permissible cutting depth: lower horizontal working unit 0-10 mm, right vertical working unit 0-10 mm Feed speed 6-36 m/min Diameter of feed rollers 140 mm, width 50, 30, 20, 15 mm Tool rotation speed 6000 rpm Number of working units: horizontal 3+1 pieces, vertical 3 pieces Lodpfx Aox It A Ujkysrk

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Lodpfx Akox H Al Njyjrk Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Lrsdpevydwzjfx Akysk Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right Ledpfxorg Exrs Akysrk 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave

Year of construction: 1987, condition: excellent (used), Automatic rebating machine WEINIG UNIVAR 10 Lrjdpfx Akof Upzhsyek

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Lrjdpjvkhccjfx Akyjk Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, For sale are various table tops Lrodpfx Akepq Nxxeyok

Year of construction: 2012, condition: excellent (used), Window production line WEINIG Lrsdoh H Iyxopfx Akysk consists of: Unirex 3000 machining center Univar 15 Unitex 15

Condition: good (used), Four-sided planer WEINIG type U17N 8 spindles Lrjdpfx Aksupkc Eoyek Working width up to 170 mm Working height up to 120 mm feed infinitely variable 6-36 m/min

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Storage location: Röllbach Lsdpfxoxavtqe Akyerk

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, WEINIG, Type UNICONTROL 10/3, Machine No. 032-1136, Year 1993 Technical Specifications: Crosscut saw with 4-station turret, laser alignment light Vertical stroke 125 mm Speed 2800 rpm Spindle ø 40 mm Tool ø 350 mm Clamping length 40 mm Horizontal stroke 160 mm Motor 4 kW Extraction ø 80 mm UNITEC slotting spindle 50 x 300 mm 3 tools Vertical stroke 2 x 100 mm Speed 3500 rpm Spindle ø 50 mm Tool ø 300-320 mm Clamping length 300 mm Motor 11 KW Extraction ø 140 mm UNIVAR milling spindle 50 x 285 mm (co-rotating spindle) Lsdpfxewk U Rle Akyjrk 3 tools Vertical stroke 2 x 95 mm Speed 6000 rpm Spindle ø 50 mm Tool ø 232 mm Clamping length 285 mm Horizontal stroke 80 mm Motor 11 KW Extraction ø 140 mm UNIVAR milling spindle 50 x 285 mm 3 tools Vertical stroke 2 x 95 mm Speed 6000 rpm Spindle diameter 50 mm Tool diameter 232 mm Clamping length 285 mm Horizontal stroke 80 mm Motor 11 KW Extraction diameter 140 mm Design: Working width min. 30 mm / Working height min. 30 mm Working height max. (with stroke) 100 mm / Working height max. (without stroke) 120 mm Feed speed 1.1 KW / continuously variable 6-12 m/min. LEITZ Dufix IV-68 EURO window tool set Digital display for studio windows Mechanical length stop Screen control Double parts package Return roller conveyor Machine is technically and visually in good working condition NET PRICE: EUR 7,400 + VAT Delivery: EXW Delivery time: shortly upon request Inspection: upon request Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 1981, 4-SIDE PLANER MOULDING MACHINE WEINIG UNIMAT 17 A With 5 spindles Technical specifications: Working width: max 180 mm Working height: 120mm Spindle speed: 6000 rpm Diameter of the spindle: 40 mm Smallest tool diameter: 100mm Max. tool diameter: 160mm Max. diameter of the vertical spindles : 180mm Max. tool diameter of the 2nd right spindle: 195mm Max. tool diameter of the upper spindle: 200mm Max. tool diameter of the lower spindle: 180mm Feed speed variable: 7 - 18 m / min Throughfeed with springs pressure Trasmissione a catena ( non cardanica) Spindle arrangement: 1. spindle bottom hotizontal(planer), KW 4 Lrodpfxsgqrune Akyok 2nd spindle vertical right KW 3 3rd spindle vertical left- KW 4 4th spindle upper horizontal KW 5,5 5th spindle bottom horizontal KW 4 1 set of Planing tools are included Volt 380/50 hz SECOND-HAND MACHINE IN GOOD CONDITIONS, TESTED IN OUR WORKSHOP BEFORE DELIVERY

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Weinig 820, Lrodpfx Akjv Skayjyek Weinig 814, Weinig 811, Weinig 806

Condition: excellent (used), functionality: fully functional, power of feed motor: 11,000 W, Hydraulic feed from Weinig Feed speed 120 m/min Motor power 11 kW Lrsdpfsv Skbkex Akyok