Used Weinig Set Of Weinig Feed Roller Spacer Rings for sale (29,476)

Condition: used, Spindle with carriage of 150 cm and feed by 2 rollers Dcsdoz Ahc Aepfx Adren Note: Saw not working, the support bed is missing (see photo)

Condition: good (used), Motorized conveyor with rollers that can be rotated at a right angle (90 degrees) – used. Price (net) ex-works: only €1,500, disassembled and loaded! Manufacturer: likely Siemens Dematic Year of manufacture: Type: Length of the conveyor: approx. 1.645m Width of element: approx. 75cm Roller length: approx. 60cm Roller width: approx. 5cm Distance between rollers: approx. 5cm Height: approx. 55cm Motor: SEW Frame length: one side approx. 2m, other side unknown (but can be easily adjusted using the aluminum profiles) Condition: good Available: immediately Location: Zwickau, later in the Frankenberg (Saxony) warehouse. Dcedpfjfwr Tzsx Adrsn

Condition: ready for operation (used), working width 230mm working height 120mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder Dsdpfxeyxltae Adrscn spindles speed 6000 RPM

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Dsdpfx Adjx U Eiajrocn Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, offer consists of: Djdpfx Adexr Ag Ierecn New roller (knurled part 810mm) - for MBO folders working width 78cm - 435€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Dcsdpfx Ajwzmu Rodron Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: excellent (used), Feed rollers for Dcodpfx Adsic T R Reron DOIN 605 VUIN 605 DK 14 and other spare parts and accessories

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Dedpfx Asz Dnt Iedrscn Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: used, Second-hand 4-roller feed unit with stand from HOLZ-HER, model ETZ, for feeding workpieces in woodworking. The machine is suitable for continuous feeding in various woodworking applications. Includes new rubber rollers. Technical data: Dcjdpfx Adszymtzsron - Feed speed: 2–30 m/min

Condition: used, TECHNICAL SPECIFICATIONS: - length 5600 mm - width 600 mm Dsdpfx Aezwn Eajdrecn - pneumatic clamping force - height from base 1160 mm +/- 50 mm Dimensions - 600x90x160

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, working width 230mm working heigth 120mm 5 heads heads set bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder Dodey N N Snepfx Adrecn spindles speed 6000 RPM year 1994

Condition: excellent (used), functionality: fully functional, working width 230mm working height 160mm Dsdpfx Aoz Dn T Ijdrocn 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm (last one 50mm) manual jointer on last head rolls in the table electric regulation of top head variable regulated feeder to 36m/min chrome table pneumatic pressure of feeding rolls

Condition: used, Control system for Zehnder Sommer roller feed, built into a sturdy housing Dedpexwk Ahofx Adrscn

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Dedoyy A Iqopfx Adrscn Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Dcjdpfxex Svm Re Adrjn Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM Dedpfx Asz Dnr Rjdrjcn CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Dodpfxezp Rxys Adrocn Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. control Powercom Weinig Powermat 500 (Window Version for window producers) ----- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: ----- Tool arrangement no. 018 for window production Technical Data: ----- Working width: 20 – 230 mm (with tool cutting circle 93 – 125 mm) Working height: 8 – 120 mm (with tool cutting circle 93 – 125 mm) 1. Tool Spindle ----- First bottom spindle Diameter: 40 mm Motor with brake: 7.5 kW Speed: 8,000 rpm Tool cutting circle: 125 – 180 mm Tool cutting circle (rebate cutter): 130 – 160 mm Axial adjustment range: 17 mm Rebating device MarathonCoating for table insert before 1st bottom spindle 2. Tool Spindle POWERLOCK/HSK ----- First right spindle Motor with brake: 7.5 kW Speed: 8,000 rpm Includes high-performance ball bearings Tool cutting circle: 93 – 200 mm Maximum profiling depth: 35 mm Axial adjustment range (PowerLock): 55 mm Radial adjustment range: Min. tool diameter at fence level: 93 mm Max. tool cutting circle behind fence line 200 mm Right tool spindle: axial positioning (55 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm CNC-controlled axial adjustment CNC-controlled radial adjustment 3rd tool spindle POWERLOCK/HSK ----- First left tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Maximum profiling depth 35 mm Axial adjustment range for PowerLock 55 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Pressure shoe in front of left tool spindle, incl. 2 spring-loaded lateral pressure rollers 4th tool spindle POWERLOCK/HSK ----- First top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cutting circle for straight-knife cutterheads max. 163 mm Maximum profiling depth 35 mm Axial adjustment range 40 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Top tool spindle: axial positioning (40 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm 5th tool spindle POWERLOCK/HSK ----- Second top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cut...

Condition: excellent (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Dcsdpjzughzofx Adron Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Slotted guide for short or difficult-to-guide workpieces, coated...

Year of construction: 2012, condition: used, Profiling line T8. The line has been used very little and is in excellent condition. Dsdpfoxdl Husx Adrjcn Specification: Manufacturer: Rollsett Made in: Finland Year: 2012 Produced profile: T8 Other: Automatic unloading table included in the set. Training and installation can be provided on request. If you have further questions, we will be happy to answer them.

Condition: excellent (used), Setting rings Diameter 40 mm - 0.001 " 35 mm - 0.001 mm " 32 mm h6 " 31.4 + 0.001 " 30.001 " 29 - 0.002 " 28 + 0.000 " 24.995 " 14 " 12 - 0.001 " 11.000 " 10.001 " 8 - 0.001 Dcodpodx E Hrefx Adren " 6 - 0.002 " 4 + 0.001 Setting rings can also be sold individually.

Condition: excellent (used), Weinig Profimat 26 Super four-sided planer Dcedpfx Aeu Hgd Iedrjn Working width 230mm Working height 130mm Number of spindles 5 Arrangement of spindles Bottom 4kw Left Right 7.5kw Top 5.5kw Bottom 4kw Pneumatic presses divided into 3 sections Feed speed adjustable by variator 5-24m/min CE certificate Technical documentation

Condition: used, The Weinig Unimat 23 SP automatic planing and splitting machine is designed for the precise planing or pre-planing and splitting of solid timber in a single operation. With four spindles, a working width of 230 mm and a working height of 120 mm, the machine is suitable for efficient processing in the timber industry. Technical data: - Spindles: 4 - Working width: 230 mm Dodpfx Aozrxywedrecn - Working height: 120 mm - Spindle 1: Bottom (5.5 kW) - Spindle 2: Top (5.5 kW) - Spindle 3: Right (11 kW) - Spindle 4: Left (11 kW) - Feed: 5.5 kW

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Dcedpfjxpn T Ujx Adren Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 1990, Working width: 220 mm Working height: 120 mm Number of spindles: 5 Spindle arrangement: bottom / right / left / top / bottom Dedpjy Hf A Rjfx Adrocn Motors: 7.5 KW, 11 KW, 11 KW, 11 KW, 7.5 KW Table lubrication Feed drive: 2.2 KW Feed speed: 6/22 m/min Year of production: 1990 Machine dimensions: - Length: 4400 mm - Width: 1700 mm - Height: 1250 mm - The machine comes with 4 heads mounted on the spindles ( 2 x 180 + 2 x 120 mm ) - The machine comes with lots of extra tools / heads / infeed wheels / Keys

Condition: like new (used), Original CATERPILLAR intermediate ring (rubber tire ring) for CAT wheeled excavators and material handlers. 8 pieces still in stock. Dcsdpfxjyk Dahe Adren