Used Wf Hhp 625 Presse Horizontal Hydraulic Press for sale (32,481)

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with draw cushion - Pressing force: 2500 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Draw cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm Fodsycl Evjpfx Afuepn can be retrofitted with: - new control system, new control cabinet, light curtain (1 cycle, 2 cycles, protection), new hydraulics, - new seals - new occupational safety inspection

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm Fpjdpfxew Smuke Afuen total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: excellent (used), functionality: fully functional, overall weight: 800 kg, Year of construction: 1995, pressing force: 10 t, operating speed: 260 mm/s, stroke length: 200 mm, table length: 440 mm, table width: 430 mm, type of input current: AC, Equipment: safety light barrier, Manufacturer JAM Model HYP-1000 Model year 1995 Capacity 98KN (10t) Fpjdjwcqc Ujpfx Afuen Stroke 200mm Nyitott magasság: 395mm asztal méret 440 × 430mm Shock hole φ32 × 60L mm ram aproaching speed:260 mm/s ram pressure speed:19 mm/s ram return speed: 219mm/s With light safety device voltage 3-phase 200v 1,5kw press body mass: 800kg operation oil: 43liter ​ Height (mm) 1395 Width (mm) 700 Depth (mm) 1170

Condition: good (used), Year of construction: 1994, functionality: fully functional, operating hours: 25,000 h, pressing force: 400 t, table width: 1,360 mm, table length: 2,000 mm, table height: 1,125 mm, oil tank capacity: 3,400 l, total width: 3,500 mm, total height: 4,600 mm, installation height: 600 mm, Further images and technical data can be provided by email upon request. Sale is ex-location without warranty and return. Dismantling and collection must be carried out by the buyer. The press is standing at ground level without a base. We deliver the press media-free. The digital hours counter is no longer accurate. The manual counter shows approximately 25,000 hours. Fjdpfjvb D Trex Afuspn

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Technical Data: - Punching force: 700 kN - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm Fedpfozzzi Hjx Afuopn - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm - Stroke adjustable in steps: 0 to 75 mm - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch - Center-finding device - Support table with stops and scales

Condition: used, functionality: unexamined, Hydraulic workshop press in a single-column design (C-frame). Hydraulic cylinder located at the top with a pressure gauge on the press head, and a robust clamping table mounted on a stand. Folding perforated sheet metal safety guards on both sides, control panel on a support column with emergency stop. Residual travel: 1 mm, residual travel time: 49 ms, safety clearance: 98 mm. Fodpsz A Unijfx Afujpn Location: Homburg (Saar), Germany. Inspection possible by appointment. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: excellent (used), Year of construction: 2017, Pressing force: 8,000 kN Stroke: 2,000 mm Clamping area: 4,900 x 2,500 mm Fpodpfx Aoz A Tvxofusn Max. tool weight: 50,000 kg Approach speed: 300 mm/s Working speed: max. 60 mm/s - min. 6 mm/s Weight without tool: 225,000 kg

Condition: excellent (used), Heavy hydraulic press for forming, compression molding, stamping of wooden and non-wooden materials. Single-opening/daylight (with No. 2 plattens) PLC tipo EC 609 Fodpfxezyixas Afuepn Plattens dimensions mm 1900 x 600 No. 4 vertical hydraulic pressure cylinders Total pressure 800 Tons Up-stroke of the cylinders Max opening between the plattens mm 325 approx.

Condition: new, Year of construction: 2018, machine/vehicle number: DF0280, pressing force: 160 t, pressure:160 t passage width:1000 mm stroke:800 mm total power requirement:22 kW weight of the machine ca.:13 t dimensions:2300 x 2850 x 4000 mm return capacity:16 t Table dimensions:1430 x 1000 mm :1430 x 1000 mm table height over floor:850 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:15 mm/sec :400 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm Fpedpjd Ap Udsfx Afuon :200 mm/sec Monitor:10 Zoll

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. Fsdpfxsgg Nn Sj Afuspn CE marking

Condition: used, Year of construction: 1990, Press force: 200 t Stroke: 300 mm Frame width: 1400 mm Side frame opening: 770 mm Shut height (stroke up): 500 mm Fpedezypkvepfx Afuen Table area: 1300 x 1100 mm Cushion force in table: 80 t Cushion stroke in table: 150 mm Cushion area in table: 700 x 700 mm Table height above floor: 930 mm

Condition: good (used), Year of construction: 1978, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Fsdpez Iyy Iofx Afuopn Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm Fodpfx Afotqqq Reuopn total power requirement 15 kW dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Fpjdpfx Afjpbvqveujn Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters Fpodpsz Afhpjfx Afuen - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: excellent (used), functionality: fully functional, pressing force: 120 t, stroke length: 300 mm, operating speed: 59 mm/s, reverse speed: 180 mm/s, table width: 600 mm, table length: 1,000 mm, distance table to ram: 800 mm, clearance between the columns: 850 mm, overall weight: 6,000 kg, operating pressure: 290 bar, installation height: 500 mm, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Fpsdpeylk Eajfx Afuon

Condition: used, Year of construction: 1980, Press force: 250 t Stroke: 250 mm Frame width: 1125 mm Fpsdpfjzyl Haox Afuen Side frame opening: 700 mm Shut height (stroke up): 800 mm Table area: 1100 x 900 mm Cushion force in table: 63 t Cushion stroke in table: 100 mm Cushion area in table: 700 x 400 mm Table height above floor: 960 mm

Year of construction: 1987, condition: used, Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible. Fpodpozybumefx Afuen

Condition: good (used), Year of construction: 1993, functionality: fully functional, Hand insertion safety – Pressing force up to 100 kN Throat depth: 210 mm Table size (W x D): approx. 500 x 400 mm Installation height with/without clamping plate: 300 mm Stroke: 100 mm Total power: 2.5 kW Weight: approx. 2.5 t Oil fill: approx. 150 l Required space (W x D x H): approx. 0.95 x 1.5 x 1.95 m Equipment and delivery scope: Fedpfx Afoz Hpcveuopn Switch-over between travel / pressure Pressure control valve with gauge display Adjustable dwell time Documentation

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 2290 [h] Fedpfx Asuhak Uefujpn - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((ength-width-height) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: new, pressure 200 t stroke 400 mm daylight longitudinal/sideways 1300 /450 mm dayligth 900 mm tank capacity 75 l liter capacity 22 l feed down 6,9 mm/sec feed up 12,6 mm/sec Motor output 7,5 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,5 x 1,1 x 2,6 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Fodsfm T Hgjpfx Afuspn Safety valve with cylinder end position. CE marking 2 year guarantee

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Width 1000 mm Depth 780 mm Fpsdpozdufyofx Afuen Weight 325 kg

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6411, clamping force: 8,000 kN, "IMV Presse HPF-AZ80 Hydraulic Injection Molding Press 800ton with overhead hydraulic tank and robot loading system. Fpsdpfszhugxex Afuon

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Fpedpfoz Aaggsx Afuon Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED Fpjdpfx Afszn Afvousn year 2009 price POA specification