Used Wibo** Thermatic 1000 for sale (8,625)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW Fjdpfx Afjudxchouegh 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Bongard MG Range Gas or oil-fired, depending on configuration Heating power: 110 kW Fgedjzyafdjpfx Afuoh Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 mm copper pipe Smoke exhaust: Ø 200 mm Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg Key advantages Capacity of 180 to 216 baguettes (250 g each) Production of 108 to 135 loaves (400 g each) Rotating trolley loaded up to 200 kg Baking chamber entirely made of stainless steel Adjustable blowing vents Two valves for programmable steam evacuation Retractable and removable ramp for loading Front access to the burner and technical components Reinforced door with double-glazed, ventilated glass, removable

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled Fgjdpfezbr U Ujx Afujh -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Fsdpfevrq U Djx Afujgh

Year of construction: 2014, condition: good (used), Riggs 1000 Depositor Fjdozvlkkspfx Afusgh Stainless depositor, 50L hopper, filling 5ml to 55ml, with nozzle on hose, mobile

Year of construction: 2000, condition: used, X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible. Fsdpfx Afszvv I Toujgh

Year of construction: 2014, condition: not inspected (used), Ilapak Carrera 1000/40 Flowrapper Model Carrera 1000/40 Year 05- 2014 Serial Number 0640490091 Electric 400 V 50 Hz – 5000 watts Jaw width 250 mm Bar transfer conveyor through the jaws Infeed length 2.2 metres Overall length 3.95 meters Overall width 1.4 metres Fgodsvkg A Ispfx Afuoh 1 x folding box 120 mm wide product 1 x folding box 140 mm wide product The Machine is in good working condition It is offered at a huge discount to clear it from our stock Price reduced by 50 %

Condition: used, Year of construction: 1990, This Polar L-1000-G-3BF is a robust piece of equipment designed for handling heavy loads. Currently dismantled and located in Germany. With a maximum load capacity of 1000 kg and equipped with a pallet lifter, this model is well-suited for various industrial applications. Format: 100x140 cm Fodsvfx Tzopfx Afuegh Equipment: Max. Load capacity: 1000 kg

Condition: used, Year of construction: 2006, Wood chip heating system Fröling Lambdamat FUR 1000, output 1000 kW, year of manufacture 2006, moving grate firing system (for poor fuel quality), hot water system with a maximum protection temperature of 110°C, including pneumatic cleaning system, including hydraulic feed system with backfire protection and hydraulic unit, including multi-cyclone separator with flue gas fan, including flue gas pipes, including control system, including fuel transport system, including sliding floor, system is functional, system must be dismantled by the buyer. Fgjdpfsvyrwpjx Afush

Condition: new, Year of construction: 2025, weight max. 1 t clamping width 810 mm Colour 7016 RAL length 1210 mm width 810 mm Fgjdpfsr I E Hgsx Afueh height 590 mm gear diameter 175 mm dimensions of the machine ca. 1370 x 840 x 605 mm Robust pallet truck for the safe and easy transport of pallets in workshops, warehouses, or factories - Powder-coated in anthracite gray - Made in Germany. - Four corner stops prevent the load from slipping during transport. - The pallet truck chassis is easy to maneuver thanks to its two swivel casters. Transport can be carried out with low rolling resistance

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC Fgodpfx Afoxak Hxoujh as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm total power requirement 8.5 kW weight of the machine ca. ca. 3.800 kg Fgjdpfxjzn Ahkj Afuoh dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes * With "FAGOR" control unit * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system

Condition: used, turning length 1000 mm turning diameter 330 mm turning dia. over face-slide 198 mm turning dia. in gap 476 mm spindle bore 38.0 mm turning speeds 70 - 2000 U/min bed width 180 mm spindle taper DIN ISO 702-2 Nr. 4 taper in tailstock 3 MK quill travel 110 mm total power requirement 1.5 kW weight of the machine ca. ca. 610 kg. range L-W-H 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped with ribs - The speed and feed rate adjustment is simple in design, smooth-operating, and . can be shifted precisely Scope of delivery: - 3-jaw chuck - MULTI-FIX tool holder with insert - Safety guard for the 3-jaw chuck - Slip clutch - Coolant system Fodpfx Aszlukxsfuogh - Foot pedal with brake function, CE-compliant - Rear splash guard - Machine light - Base frame

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Fedpfx Aox Ehg Tsfuogh

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 155847, Round grinding machine Knuth RSM 1000, year of manufacture 2012, fully functional, with internal grinding attachment. Condition: fully functional Year of manufacture: 2012 Location: West Saxony Fgedjzyltmspfx Afuoh Price: on request Technical data: Manufacturer: Knuth Werkzeugmaschinen GmbH Type: RSM 1000 Serial number: 155847 Power: 9.5 kW Grinding length: 1,000 mm Grinding diameter: up to 320 mm Center height: 180 mm Dimensions: L 3,600 × W 1,650 × H 1,800 mm Machine weight: approx. 3.7 t Equipment: Digital 2-axis position display (DRO) Internal grinding attachment (standard) Steady rest (standard equipment) Central lubrication system Coolant system Description: For sale is a Knuth RSM 1000 round grinding machine, manufactured in 2012, with a digital 2-axis position display. With a grinding length of 1,000 mm and a grinding diameter of up to 320 mm, the machine is suitable for both single-part machining and small-batch production. It comes standard with an internal grinding attachment and a steady rest for machining long workpieces. The machine is fully functional. Inspection and test run possible at the location in West Saxony by appointment. Price: on request Other machines available from site liquidation Takeover of the location negotiable.

Condition: used, Year of construction: 1963, machine/vehicle number: 023-0281, Item No. 21275 Manual Swing Bending Machine Technical data: - max. working width 1030 mm - max. material thickness 2 mm - bending angle approx. 0 - 135° - lockable with end stop - upper beam is operated with a lateral hand crank - max. stroke of upper beam 120 mm - max. adjustment of bending beam 45 mm - bending process is supported by an eccentric weight Fodpfx Afezy Rg Seujgh - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 88,631 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, plate length: 795 mm, plate height: 790 mm, total length: 5,100 mm, total width: 2,000 mm, overall weight: 9,000 kg, Arburg 520A-1000-400 (246) hybrid injection molding machine with sorting flap and gas boost Number: 246 Availability: in stock Year of production: 2007 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1600 Column spacing [mm]: 520 x 520 Plate size [mm]: 790 x 795 Control type: Selogica Tongue: german Installed power [kW]: 21.2 Working hours [h]: 88631 Weight [kg]: 9000 Dimensions [mm]: 5100 x 2000 Feed hopper: NO Robot socket: Yes Air valve: 3x Fgedpjzzb N Hsfx Afuoh

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Polar LW 1000-4 stacking lift, year of manufacture 2003 Platform: 80 x 126 mm Fgedjzwg A Repfx Afueh The automatic lifting of the cutting material allows the operator to load the material into the shaking device or directly into the cutting machine at an ergonomically favorable working height. The stacking lift can also be used to unload cutting material. Stacking lifts do not need to be anchored to the floor and can therefore be easily relocated. They are equipped with continuously adjustable photoelectric barriers for automatic lifting or lowering. The control panel can be easily mounted on the right or left side.

Condition: used, Second-hand machine Features and technical specifications: Fedpfxjzk N Ate Afuegh - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SN064871, Sound insulation, RFID chips, LiServ 4.0, energy measurement package, ME 5000, barcode scanner. Fgjdpjzzmgkefx Afueh

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Fgjdpfew U U R Eox Afueh Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Fgodpfxsxaafqj Afueh Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: ready for operation (used), Unipo UCP-1000 control panel 2IBT9UXT0000 SN: 80216/732, used, normal signs of use, 100% functional Fgodpfx Afjz Adf Heuoh

Condition: used, Year of construction: 2001, operating hours: 6,023 h, total height: 2,500 mm, total length: 3,500 mm, total width: 2,000 mm, Empty weight: 5.000 kg Price: On request - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 00600169 - Operating hours: 6023 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 18-M - Power [kW]: 15.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 510 - Table length [mm]: 1150 - Table width [mm]: 500 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8000 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 3500mm x 2000mm x 2500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fgodpszlxnbefx Afueh Lukas van Rossum

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, rotor diameter: 600 mm, rotor width: 1,000 mm, year of last overhaul: 2026, Shredding mill, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 75 kW Hopper: Conveyor belt hopper Working width: 1000 mm Rotor diameter: 600 mm Year of manufacture 2015, fully overhauled with - new rotor - new hopper - new base frame Fedpsz Ak A Ejfx Afuegh Examples of applications: Shredding of solid lumps, start-up blocks, profiles, beverage crates, boxes, vegetable crates, etc.