Used Wicke Steerable Heavy Duty Castor for sale (5,685)

Condition: used, mileage: 370,777 km, power: 368 kW (500.34 HP), first registration: 04/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: air conditioning, MAN 33.500 TGS 6x4 First registration: 04/2017 * Automatic transmission * Unladen weight: 9,725 kg * Wheelbase: 3,250 mm Kedpfx Aeynplksfdjdk * German registration Inspection possible at any time during our opening hours, test drive by appointment only! For export sales, a deposit will be retained, which will be refunded after receipt of the proof of arrival. Company logos or advertising logos on the vehicles may have been digitally altered on the photos. No guarantee is given for the functionality of the extras. All information provided without warranty - subject to errors, changes, typographical mistakes, and prior sale. Vehicle descriptions do not constitute guaranteed characteristics. Please refer to our Terms and Conditions and make sure you are familiar with them.

Condition: excellent (used), mileage: 534,062 km, power: 537 kW (730.12 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: semi-automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 7,250 mm, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, parking heater, power assisted steering, retarder, soot filter, spoiler, traction control, trailer coupling, - Alarm - Aluminum fuel tank - Roof spoiler - High beam - Low-noise - Speed limiter - Tipping hydraulics - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Air suspension - Air horn - Particulate filter - Radio/CD - Reversing camera - Sleeper cab - Side skirts - Sun visor - Stability control - Auxiliary heater - Heated windshield automatic - Toolbox - Power take-off (PTO) SCANIA S730 V8 NGS | 8X4 | ​​Heavy Duty | 534,062 km | 2020 | Hydraulics | Retarder | Full air suspension | Sliding fifth wheel | King of the road | Leather seats | Seat heating/cooling | Stand-alone climate control | Navigation system | Reverse camera | Fridge | Sleeper cab | Air conditioning | ACC | Cruise control | Semi-automatic transmission | Euro 6-D | TÜV/MOT/APK 02-2027 | Belgian truck *Heavy-duty truck direct from the Scania factory* Kjdsyx Acfjpfx Afdjdk Chassis number: YS2S8X40002169225 EXPORT Truck transport: Austrian transit license plates with insurance for 21 days + €550 Shipping by sea: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to Zeebrugge port + €400 More about the truck: Video of the truck (YouTube): More about Geerts Trucks & Trailers: YouTube channel Geerts Trucks & Trailers: Instagram Geerts Trucks & Trailers: Facebook Geerts Trucks & Trailers: TikTok Geerts Trucks & Trailers: LinkedIn Geerts Trucks & Trailers: Follow us and subscribe to our channel to see our latest vehicles! No rights can be derived from possible errors in this ad. Geerts Trucks & Trailers always strives to provide accurate information. Technical information Number of cylinders: 8 Engine displacement: 16,353 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Axle brand: GOODYEAR; Left tire tread: 70%; Right tire tread: 70% Front axle 2: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Axle brand: GOODYEAR; Left tire tread: 70%; Right tire tread: 70% Rear axle 1: Tire size: 315/80R22.5; Dual tires; Differential lock; Max. axle load: 13,000 kg; Axle brand: ALBOURGH; Left inner tire tread: 50%; Left outer tire tread: 50%; Right inner tire tread: 50%; Right outer tire tread: 50%; Reduction: Outboard planetary axles Rear axle 2: Tire size: 315/80R22.5; Dual tires; Differential lock; Max. axle load: 13,000 kg; Axle brand: DEBICA; Left inner tire tread: 50%; Left outer tire tread: 50%; Right inner tire tread: 50%; Right outer tire tread: 50%; Reduction: Outboard planetary axles Weights Kerb weight: 12,828 kg Payload: 29,052 kg Gross vehicle weight: 41,880 kg Interior Upholstery: Leather Maintenance, history and condition APK (MOT/roadworthiness): Inspected until 02/2027 Technical condition: very good Visual condition: very good...

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Kdjdpjywpciefx Afdsk

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Kdodpfx Ajyyxm Nsfdsk Opening inlet 500 x 600 mm

Condition: used, functionality: unexamined, machine/vehicle number: M11359*17765, Year of construction: 2018, Swedish Manufacture Load Capacity & Mast • Load capacity: 12,000 kg at 1,200 mm load center • Mast: Duplex standard o Lift height: 6,500 mm o Collapsed height: 4,895 mm o Extended height: 8,100 mm o Free lift: 0 mm • Tilt: 5° forward / 10° backward _____ Dimensions • Length: 5,205 mm • Width: 2,550 mm • Height: 2,905 mm • Wheelbase: 3,500 mm _____ Attachment: STEINWEG Stone Stacking Grab Type HG1T-6000S • Gripping range: 0.96–1.00 m • Opening range: approx. 0.6–1.3 m • Gripping height: 1.3 m (special height) • Grab capacity: 6,000 kg • Double gripping rails: 1 pair, shock-absorbed plastic jaws, length: 2.3 m • Pendulum-mounted • Forklift carriage arm: Double-beam design, with endless rotator and pendulum suspension, capacity: 8,000 kg at outreach 1.6–2.1 m • Hydraulic outreach: 1.6–2.1 m • Stabilizers: 2 units for compensating pendulum movements Kedoyyvvhjpfx Afdedk • Integrated sideshift: travel 250 mm • Lock valves: Electromagnetic, 24 V DC _____ Wireless Pressure Monitoring • Transducer: Wireless transmission, frequency 868.4 MHz • Temperature range: -30°C to +85°C • Battery: 3.6 V lithium, approx. 1 year lifespan (with 5-second interval) • Receiver: Digital display, signal lamp, control box mounting _____ Powertrain & Chassis Component Description Engine Volvo TAD-871-VE, 6-cylinder, 185 kW at 2,200 rpm, 7.7 L displacement, 1,160 Nm, EU Stage IV Transmission ZF 4WG-191 automatic, 3+3 gears Drive axle Kessler D81 Steer axle Hydrostatic, double-acting steering cylinder Tyres Drive axle: 4 × 12.00 × 20" Solid Hauler Steer axle: 2 × 12.00 × 20" Solid Hauler Braking system Oil-immersed wet disc brakes, hydraulic parking brake (spring applied, electronically controlled) Hydraulics Parker load sensing system, variable pump capacity, 4 servo-assisted control levers Electrics 2 LED front headlights, 2 LED work lights on mast, 4 indicators, LED rear lights, CanBus control for engine, transmission and cabin _____ Cab & Equipment • Driver's seat: BeGe 9100, air-suspended, 2-point seatbelt • Cabin: OPTIMA, ergonomic, high noise and vibration insulation, hydraulically tiltable to the side, 2 doors, tinted windows, sliding windows on both sides • Windscreen wipers: front, roof, rear window incl. washer system • Steering wheel console: Adjustable • Heater & defroster • Interior cabin lighting • Rearview mirror, parking brake warning buzzer _____ Additional Equipment • Mud flaps front & rear • Exterior rearview mirrors on fender (high) • Turbo II Heavy Duty air filter • Additional hydraulic function • Quick couplings on fork carriage • Hydraulic accumulator/vibration damper 60 bar/2 L • Hydraulic oil tank pre-heating • Additional LED work lights (2x on mast) • Reversing alarm, LED beacon • Electric cables above mast • Power connection 400 V, 3-phase • Blue Spot front and rear • EMC 107 electronic weight display (0.1 t) • EMC 114 electronic joystick with RPM boost • EMC 122 speed limiter 20 km/h, switchable to 15 km/h • Electric seat heating • DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers • Intermittent wiper • ACC air conditioning • SMV universal mounting rail • Movable A4 writing pad • Diesel parking heater + engine water heater

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger Kodpfod Hxx Asx Afdedk - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0729389557300, load capacity per storage section: 160 kg, total length: 162,000 mm, total height: 2,500 mm, shelf height: 2,500 mm, shelf length: 162,000 mm, frame height: 2,500 mm, load per truss pair (max.): 160 kg, frame width: 600 mm, number of shelf rows: 23, 11 double-row and 1 single-row shelving units, Sendzimir galvanized, each with a length of 7.03 m, 2.5 m high, 0.6 m deep, each featuring 7 sections with a clear width of 0.97 m, and 7 shelf levels per section, shelf load capacity of 160 kg. - 184 frames (FR25060), pre-assembled, 2500x600 - 1127 shelves (FB097604), 970x600x40 - 88 connectors for double rows (FBDV-Set) - 22 double cross bracings (VK2510) - 23 load capacity signs (BSMcP) Kjdpsyy I Enofx Afdodk Frames pre-assembled Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to site / assembly location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Delivery available throughout Germany mainland, except islands! Deliveries to EU countries upon individual agreement.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. Ksdpfx Ajfdkb Tsfdjdk We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments Kdsdsh R Taqepfx Afdjk - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm Kdodpfx Aemhhypjfdek - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Kdodpfsmhh Dhex Afdek - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Ksdpfjmhh Dzex Afdedk - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Kdjdpfx Afemhh Anjdok Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Kedpfoguk A Hex Afdjdk - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Kedjguk Dkspfx Afdodk According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Kedpfx Aomhhy Nofdsdk Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Ksdpfomhh Dtsx Afdodk The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Kdodpfxjguk Dvs Afdok 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0729389557300, load capacity per storage section: 160 kg, total length: 192,000 mm, total height: 2,000 mm, shelf height: 2,000 mm, shelf length: 192,000 mm, frame height: 2,000 mm, load per truss pair (max.): 160 kg, frame width: 600 mm, number of shelf rows: 32, 16 double-row shelving units, Sendzimir-galvanized, each with 6.03 m length, 2 m height, 0.6 m depth, each with 6 sections, 0.97 m clear width per section, each section with 6 shelves, shelf load capacity 160 kg. - 224 frames (FR20060) pre-assembled, 2000x600 - 1152 shelves (FB097604) 970x600x40 Kdjdsyyvq Sjpfx Afdek - 96 connectors for double rows (FBDV-Set) - 32 double bracing units (VK2010) - 32 load capacity signs (BSMcP) Frames pre-assembled Freight / Delivery: - max. 20 business days after receipt of payment - Delivered free to construction/assembly site - Unloading from truck is to be arranged by the buyer with their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, support length: 3,600 mm, shelf length: 11,200 mm, frame height: 4,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, 1 row of pallet racking (M45113615-3) 11.2 m long, 4.5 m high, 1.1 m deep, 3 sections, each 3.6 m wide, each with 3 beam levels, compartment load capacity 3,000 kg. Kodpfx Afev Urchededk - 4 frames (RM4511 - RAL5019) - 8 base plates, spacer material, fastening material - 16 floor anchors (ZZBA1210) - 18 individual beams (T3615 - RAL2008) - 1 load capacity sign (BSMcP) Frames bolted, not pre-assembled Shipping / Delivery: - up to 20 working days after receipt of payment - free delivered to construction site / assembly location - Unloading from the truck is to be carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany, excluding islands! Deliveries to EU countries by individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 14,200 mm, shelf height: 4,500 mm, support length: 2,700 mm, shelf length: 14,100 mm, load per truss pair (max.): 3,050 kg, frame width: 1,100 mm, number of shelf rows: 1, 1-row pallet rack (M45112711-3+) 14.1 m long, 4.5 m high, 1.1 m deep, 5 bays, each 2.7 m wide, 3 beam levels each, shelf load 3050 kg, complete with support grid 1000 kg. - 6 frames (RM3511 - RAL5019) - 12 base plates, shims, and screws - 24 ground anchors (ZZBA1210) - 30 single crossbeams (T27114 - RAL2008) - 45 support grids (ZG8811010004) - 1 collision protection / impact protection (ZRS40901) - 1 load-bearing plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment Kjdpfx Afjv Unxlsdodk - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 1, Three-bay pallet rack (M35112711-3) 8.5 m long, 3.5 m high, 1.1 m deep, 3 bays, 2.7 m wide, 2 beam levels each, shelf load 3000 kg. - 4 frames (RM3511 - RAL5019) Kdsdpev Urrcjfx Afdok - 8 base plates, shims, screws - 16 floor anchors (ZZBA1210) - 12 individual beams (T2711 - RAL2008) - 1 load plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / assembly location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, The bucket is available from stock. Suitable for quarries and mining operations. A great opportunity to get acquainted with a high-quality bucket Edge Length: 1550mm Capacity: 1.75m3 Kdjdpfxey Dz U Re Afdsk For detailed information please contact us

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Min. clamping dia. 170mm Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Height of bed 650mm Special equipment: - 4-jaws chuck dia. 1700mm - tool system: double shelf toolpost - steady rest dia. 200-600mm - steady rest dia. 600-1100mm Kdedpfx Aeyy Nx Njfdek - open steady rest up to 1600mm Total weight of the lathe 110 tons

Condition: used, Year of construction: 1988, Height of centers: 2, 050mm Max. turning diameter: 4, 000 mm Turning Lenght: 10, 000mm Max. load between centers 25 tons Max. load between centers with 2 steadies 40 tons Headstock travel 1 000 mm Main motor power 75 kW Spindle speed (3 ranges) 0, 5 - 100 RPM Spindel hole: 105 mm Kedpfx Afsdah E Aodsdk Tailstock diameter: 280 mm incl. faceplate 2, 000 mm incl. grinding attachment incl. 3 pcs steady rests (100-400, 250-600, 400-800) incl. 1 pc. open steady rest (400-1300) Total weight of the lathe: 110 tons Condition: very good