Used Winter Combined Planing-Thicknessing Machine for sale (69,335)

Condition: ready for operation (used), PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Blsdpeyt E R Hjfx Ad Aeg Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Blsdoyatffepfx Ad Asg Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition Bodpfx Asi Duh Ied Aolg

Condition: used, Year of construction: 2023, Working width 630 mm Working height 3-300 mm Blsdpfx Adsyk H S Hs Asg Motor output 7,5 kW Number of knives 4 St. Feed speed 0-16 m/min. Dimensions (L/W/H) 1200x1100x1160 mm weight of the machine ca. 950 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2540x2900x850 mm Weight 1200 kg Bsdjvz E Ikopfx Ad Aolg Total power requirement 5,5 kw

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 300 mm, number of spindles: 10, No minimum price – guaranteed sale to the highest bidder! The machine can be used either as a standalone unit or as part of a complete system: Bodpfxeyk Tvlo Ad Aelg - Joulin vacuum lifter + stacking task & feeding (Search ID: 21264612) - Canali ML 1100 TWIN F.L. 30 H.S. band resaw (Search ID: 21264817) TECHNICAL DETAILS Working width: 300 mm Feed rate: 140 m/min to 200 m/min MACHINE DETAILS Spindle configuration: Horizontal spindle Right vertical lift spindle Left vertical lift spindle Horizontal lift spindle Right vertical lift spindle Left vertical lift spindle Top horizontal spindle Bottom horizontal spindle Bottom horizontal spindle Bottom horizontal jointer spindle EQUIPMENT 10 spindles Multiple lift spindle system NC control All spindles with support bearings (hydraulic clamping) Planer table Precision work in terms of dimension and angle

Condition: good (used), Year of construction: 2006, This is a well-maintained folding machine from 2006 for sale, 6 pockets 2 swords. Available from 12/24 Blodpfxsu Ah Dbj Ad Asg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, planing width: 620 mm, planing height: 300 mm, working width: 600 mm, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine Number: 22.500 Year of Manufacture: 2003 General Data Machine type: Planing and profiling machine with chamfering units Total connected load: approx. 222.8 kW Feed speed: 10 – 100 m/min (adjustable, frequency-controlled) Heavy-duty outfeed unit (AZG): 4 rollers, pneumatic roller pressure, universal joint shafts Tools / Units • Planing spindles: Bottom planing spindle: 37 kW Top working spindle: 45 kW Right working spindle: 22 kW Left working spindle: 22 kW • Chamfering units: 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – each 1.85 kW Speed: approx. 5,600 rpm, height adjustable depending on chamfer width Blodpjymgxxjfx Ad Aeg Total number of processing tools: 8 (4 planing/working spindles + 4 chamfering units) Drives Feed unit: approx. 32 kW • Auxiliary motors (individually): Height adjustment (thickness) Width adjustment Chip removal adjustment Machine adjustment Extraction system Individual extraction nozzles Ø 160–200 mm depending on unit Total required extraction capacity: approx. 25,350 m³/h Accessories Various planing heads and tools (see photographic documentation in the appendix) Switch cabinet included The SUPERMASTER series delivers optimal results in the production of high-quality dimensional timber such as structural solid wood (KVH), Duo/Trio beams or glulam. Additionally, machines of the SUPERMASTER series are also used in the production of cross laminated timber (CLT). Thanks to the powerful feed system, large, heavy, wet, frozen as well as small, fine workpieces are processed effortlessly by the SUPERMASTER.

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Bedpfx Adou Damdj Ajlg

Condition: ready for operation (used), An old plano milling machine (guideway grinding machine) Waldrich Coburg is available. Bed length: 5500mm, bed width: 750mm, machine dimensions X/Y/Z: approx. 12000mm/300mm/3000mm, weight: approx. 37500kg. An on-site inspection is possible. Bedpow Rqw Hjfx Ad Aolg

Year of construction: 1987, condition: ready for operation (used), A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible. Bodjv T Apcspfx Ad Aslg

Year of construction: 1965, condition: ready for operation (used), Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible. Blodpjwxxv Uofx Ad Asg

Condition: new, Year of construction: 2025, The Cormak planer-smoother is a solid and well-thought-out design that offers a lot of possibilities in woodworking. Machine description Their task is to give the surfaces the right flatness in order to subject them to further processing stages. The large weight of the machine (105 kg net) ensures great stability, which guarantees safe operation without vibrations. ADVANTAGES free access to the safety switch located on the arm! table made of high-quality cast iron, ground ideal model for precise planing, leveling sides, boards, strips, beams Bodpfx Ajvughred Aelg very good quality of processing is ensured by a three-knife head the shaft cover can be freely adjusted by changing its height, angle and extension stable limiter, which helps to achieve optimal work results additional silencers have been used in the planer tables to reduce the noise level easy setting of chip collection using a hand wheel strong and stable construction will meet the requirements of not only ambitious DIY enthusiasts but also professional craftsmen. Technical parameters Engine power S1 1.1 kW; S6 1.5 kW Power supply 230V Engine speed 2850 rpm Maximum working width 152 mm Maximum planing depth 13 mm Shaft speed 4500 rpm Number of knives in the shaft 3 Knife dimensions 17x153x3 mm Shaft diameter Ø62 mm Swing ruler tilt angle 0°-45° Worktable dimensions 1210 x 185 mm Diameter of exhaust port Ø100 mm Weight approx. 105 kg Dimensions 1195 x 530 x 1150 mm The price given is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), operating hours: 6,510 h, functionality: fully functional, mileage: 58,574 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper + Winter Service from First Owner Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with new drive pedal system 3,400 sweeping hours 6,510 total operating hours 58,574 kilometers 4×4 all-wheel drive – Hydrostatic all-wheel drive Includes Kif snow plow, type CM 1600, 1500 mm wide (like new/has never seen snow), or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (like new/has never seen snow), not shown in photos Includes Gmeiner salt spreader, type Husky 500V FS, with support legs (as new/used twice for testing) 270° surround view camera system Sweeping container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Permissible total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Sound insulation package Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: Water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank: approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front): 0–50/0–70 l/min at 225 bar Blodpoyf Etfofx Ad Aeg Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg Further application options possible through additional HAKO attachments such as sweepers, snow ploughs, and lawn mowers (not included in the scope of delivery) Errors, changes, and prior sale reserved.

Condition: ready for operation (used), operating hours: 7,808 h, functionality: fully functional, mileage: 51,892 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 01/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 suction sweeper and winter service vehicle from first owner - Major engine service including timing belt, water pump, oil, oil filter, and fuel filter was performed at 51,892 km in 10/2025 - Machine equipped with new drive pedal system - 3,952 sweeping hours - 7,808 total operating hours - 51,892 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Includes Kif snow plough type CM 1600, 1,500 mm wide (like new/never used in snow) or optionally with Kif front broom type CM 1600, 1,300 mm wide, year 2019 (like new/never used in snow), not shown in the pictures - Includes Gmeiner salt spreader type Husky 500V FS with support stands (as new/only used twice for testing) - Rear-view camera - Stainless steel debris hopper - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight approx. 1,950 kg - Permissible total weight: 3,500 kg - Dimensions (LxWxH): 4,510 mm / 1,210 mm / 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds 1,600–2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low-emission Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive system - Dual-circuit high-pressure hydraulics: Circuit 1 (front): 0–50/0–70 l/min, 225 bar; Circuit 2 (rear): 0–20/25/30 l/min, 195 bar - Hydraulic service brake via foot pedal - Cab with air-suspended driver's seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - The spreader is powered and operated by the machine’s hydraulics. - Additional applications possible with HAKO attachments such as sweeper brushes, snow blades, and mowers (not included) - Subject to errors, changes, and prior sale We sell exclusively under our terms and conditions and exclude any warranty. Subject to errors, changes, and prior sale. Bedpox Ir Iijfx Ad Aelg We are available Monday to Friday from 9:00 am to 5:00 pm, Saturday by arrangement; outside these hours, appointments can be arranged by phone. We are happy to accept your used equipment/vehicle in trade-in. Sale to commercial customers and exporters is preferred; this applies to our entire vehicle inventory. The above information is non-binding; subject to errors, changes, and prior sale.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: VRBSI, Manual straightening and leveling center for straightening and tensioning of bandsaw blades. Manual roller device. Blodpfxjyizfle Ad Ajg

Condition: used, Working width 610 mm Working height 200 mm Motor output 4,4 kW Feed speed 7-14 m/min. weight of the machine ca. ca. 1.150 kg Bljdswy Itljpfx Ad Asg

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index - Miter stop 1300 mm - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each with 5.5 HP (4 kW) 400 volts - Year of manufacture 2019 Bodpfx Adev Sbpxo Aslg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Blsdpfeh Axryjx Ad Asg

Condition: good (used), Year of construction: 1991, Double sided fully automatic hydraulic drilling, milling, boring machine PADE NST Double sided fully automatic hydraulic boring, milling and drilling machine M2fi2 production of chairs, tables, frames and furniture parts Max working length 2100 mm Inclination -10° - +45 Rotation -10° - +50 2 saw blades diameter 400 mm 2 drill heads left, right rotatable by 360°, 8 spindle in cross shape grid 2 additional horizontal drill heads from the rear rotatable 360°, 8 spindles in cross pattern grid 2 milling spindles drilling shaft 30 mm Bjdpfxjdqc T Ee Ad Aslg 1 motor for longitudinal adjustment 1,5 kW 2 sawing motors 2,2 kW 4 drilling motors 2,2 kW

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 01254653, Production line for manufacturing wooden components for TERTU timber-steel guardrails. Bedpfx Aeu A Hv Nod Ajlg - Grooving machine T18 - Grooving machine – posts - Crosscut saw - Finishing machine (cutting, drilling) - Feed tables - Drilling table - 4× spare heads - Complete set of spare knives and drill bits Simple, very high-quality, and robust machines. Fully complete and ready for operation.

Condition: used, Year of construction: 1989, with positioning control and Tersa cutterblockcleaned, function tested, test run- machine lubricated- test run- infeed rollers renewed- outfeed rollers renewed- rubber lip front and rear renewed- test planingspare parts:Panhans feed rollers, overhauled controlused, good conditionmake Panhanstype 435year of construction 1989Masch.-Nr. 170GS-testedmotor 5,5 kW / 0,25 kWplaning width approx. 510 mmplaning height approx. 250 mmlink pressure beamrubber infeed rollerrubber outfeed rollerfeed 7/14 m/ber of knives 4 piecesknife systemTersa reversible kniveselectric height adjustmentautomatic positioning controlsound insulationexhaust connection D 160 mmspace requirement approx. 1100 mm x 1200 mm x 1200 mmweight approx. 950 kgtotal connected load approx. 5,75 kWstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Bljdjvwfbispfx Ad Aeg

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Blsdpfx Asvwf Enod Aeg

Condition: used, Year of construction: 1993, with Centro-Fix reversible blade Machine cleaned, lubricated, partially repainted made operational, functionally tested fully adjusted Test run Various parts replaced: 4x Tersa blades Rubber guard Used Make: Panhans Type 426 Year of manufacture: 1993 Machine no. 1399 GS wood dust tested Motor 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Table guide rollers: 2 adjustable Articulated pressure beam Steel feed roller Rubber feed roller 2 feeds Number of knives: 4 Centro-Fix reversible knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Sound insulation Extraction connection D 160 mm Space requirement approx. 1300 mm x 1100 mm x 1100 mm Total connected load approx. 8.5 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Bedpfev Hht Tex Ad Aelg Handed over in the current condition as seen, without guarantee or warranty

Condition: used, top machine with adjustable feed roller suspension infinitely variable feed electric height adjustment used, top equipment make Brugg type HDA-85 machine no. 8527 planing width approx. 850 mm planing height approx. 250 mm table sliding rollers 2 adjustable articulated pressure beam feed approx. 6-24 m/min. number of knives 4 knife system strip planing knife digital display for planing height analogue electric height adjustment with handwheel fine adjustment extraction connection D 180 mm Bedpfx Adsvwghqe Ajlg space requirement approx. 1500 mm x 1400 mm x 1900 mm weight approx. 2000 kg storage location 97447 Gerolzhofen, free loading, unpacked handed over in the current condition as seen, without guarantee and warranty