Used Wittmann Basic C 90 for sale (61,916)

Condition: new, functionality: fully functional, empty load weight: 114 kg, maximum load weight: 636 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,910 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 200 NEW VEHICLE Internal dimensions: 200cm x 106cm Total weight: 750 kg Payload: 636 kg Side board height: 30cm Unbraked single-axle flatbed trailer Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor 13-pin electrical system Rear lights with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be stored on the rear panel Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side boards 40cm - Aluminum cover with bracket for, e.g., bicycle carrier - Flat cover with or without frame - High cover 80cm or 110cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Further accessories available on request! Pictures are for illustrative purposes only and may show accessories that incur an additional charge. Plus vehicle registration document and freight to Gera: €100 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Hjdpjzk Hwnefx Ab Aet Get advice by phone, visit our website, or come directly to our location.

Condition: new, functionality: fully functional, empty load weight: 106 kg, maximum load weight: 644 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,470 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,360 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 150 Tipper NEW VEHICLE Internal dimensions: 147cm x 106cm Total weight: 750 Kg Payload: 644 Kg Side panel height: 30cm Unbraked, single-axle, low-loader trailer Side panels made of galvanized sheet steel Rear side panel can be folded down and removed Easy conversion Bolted and galvanized steel frame Drawbar can be folded down Screen-printed wood floor 13-pole electrical system Rear lamps with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side panels 40cm - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without frame - High cover 80cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Further accessories available upon request! Pictures are for illustrative purposes and may show optional accessories that incur additional costs. Plus vehicle registration document and freight to Gera 100 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. Hodozk Hb Hjpfx Ab Aet The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repairs, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: new, functionality: fully functional, empty load weight: 126 kg, maximum load weight: 624 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,260 mm, loading space height: 300 mm, total length: 3,210 mm, total width: 1,690 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 230 NEW VEHICLE Internal dimensions: 230cm x 126cm Total weight: 750 kg Payload: 624 kg Side board height: 30cm Unbraked single-axle low-loader Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor 13-pole electrical system Rear lights with reversing light and triangular reflector Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Grid structure - Extension side boards 40cm - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without bow - High cover 80cm or 110cm - Mesh, coarse or fine - Spare wheel with bracket Hodpfx Abjzk E Rmj Ast - Loading ramps Further accessories on request! Pictures are for illustrative purposes only and may show optional accessories that are subject to an additional charge. Plus registration certificate and freight to Gera 120 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to our location.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : ISO30 - Spindle speeds : 18000 [rpm] LINEAR AXES Hsdpfx Asuhb A Eob Ajt - Travels on X/Y/Z axes : 705 / 425 / 610 [mm] A ROTARY AXIS - Travel : 360 [°] (+/-) - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : +180/-5 [°] (+/-) - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 32 TABLE - Table dimensions : 1260 x 490 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2300 [mm] - Machine height : 3000 [mm] - Machine weight : 5100 [kg] EQUIPMENT - CNC : iTNC 530 - Electronic handwheel - Type of divisor : 4e-5e axe intégré * manufacturer : Fehlmann * model : ATS 160 CNC * clamping diameter : 300 [mm] * center height : 160 [mm] * tightening type : Pneumatique - Coolant tank * with high-pressure pump - Oil mist extractor - Spindle cooling unit - Workpiece probe : Renishaw OMP 40-2 - Electric transformer

Condition: new, Year of construction: 2026, overall weight: 260 kg, total length: 25,080 mm, total width: 15,000 mm, total height: 24,250 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: You will receive a 24-month warranty with this machine. Upon request, we can also offer you a suitable loading ramp, a photoelectric sensor for detecting black surfaces, or the appropriate machine film! About this model: Our "Basic" pallet wrapper is a semi-automatic stretch wrapper of European manufacture, which guarantees absolutely consistent results thanks to up to 10 programmable memory settings—effectively eliminating the "human factor." The electromagnetic brake allows you to adjust the film tension to your requirements and save these settings within the programs. Within each program, you can also set the speed of the film carriage and turntable. Top wraps and bottom wraps can also be programmed for each setting. This way, you can store individual programs for every wrapping scheme to always achieve perfect wrapping results. Weighing 260 kg, this model is suitable for loads of up to 1200 kg. Our Basic pallet wrapper features a 1500 mm turntable and is standard-equipped to wrap pallets up to 2000 mm in height. Automatic pallet detection (via photoelectric sensor) comes as standard, as do adjustable top and bottom wraps. If you need to reposition the wrapper, it can be easily moved with a forklift via integrated cut-outs. This model is our recommendation if you are looking for a reliable and cost-effective pallet wrapper that can be adapted to your requirements. About us: We believe business is done between people, not just companies! A supplier delivers the goods you order—a partner does more: they help you find the best products, support you in achieving your goals, and are by your side when challenges arise. This is our conviction. Hsdpfezr Hkdsx Ab Aet For over 40 years, now in our fourth generation, we have been the partner for SMEs when it comes to "stretching and sealing." Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your needs!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: Hodpfxeyxvwie Ab Ast • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Hedpfxsuzn Nno Ab Aet Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Year of construction: 2011, operating hours: 12,987 h, Equipment: all wheel drive, Internal vehicle number: MK300045 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Liebherr A 904 C Litronic Wheeled Excavator | 20 t | 12,987 Operating Hours For sale: a used Liebherr A 904 C Litronic wheeled excavator, manufactured in 2011. The machine is equipped with all-wheel drive and a quick-coupler system. With an operating weight of 20,000 kg, this wheeled excavator is ideal for earthmoving, civil engineering, demolition, and material handling applications. Technical specifications: * Manufacturer/Model: Liebherr A 904 C Litronic * Machine type: Wheeled excavator * Year of manufacture: 2011 * Operating hours: 12,987 hrs * Weight: 20,000 kg * Drive: All-wheel drive * Quick-coupler system * Environmental badge: 4 (Green) * Vehicle number: MK300045 * Condition: Used * German machine Inspection is possible by prior arrangement. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. Financing example: * Internal number: MK * Purchase price: €42,900.00 * Down payment: 10% * Term: 60 months * Monthly payment: €604.02 * Residual value: €9,380.00 Hsdpezri Dgjfx Ab Aot If you are interested in this offer or would like to tailor it to your needs, please contact Mr. Enchev. We look forward to hearing from you. Subject to errors. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: U/min - Cutting range: - at 90° (round): 90 mm - or (square): 80 mm - Pneumatic clamping cylinders - Material feed system with positioning control - Single stroke up to approx. 1000 mm Hedpjd Aai Tofx Ab Aot - Multiple strokes - Swiveling arm with control panel and CNC control MEP - Motorized dust extraction and chip extraction, mobile unit - Drive: 400 V / 1.1 kW - Space required: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Condition: used, mileage: 349,000 km, power: 331 kW (450.03 HP), first registration: 05/2014, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2014, Equipment: ABS, air conditioning, crane, SCANIA P 450 / 8x4 Tipper 6,90 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2014 ? MILAGE: 349 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH Hsdpfozt E Ausx Ab Aot ? AIRCONDITION TIPPER: 690 x 248 x 60 cm (L x W x H) CAPACITY: 17 000 kg TOTAL WEIGHT: 32 000kg TIRE SIZE: 315/80R22,5 WHEELBASE: 193/317/134 cm SUSPENSION: SPRING CRANE: PALFINGER PK 23002 - SH C + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 83834

Condition: used, Year of construction: 2008, Control Heidenhain iTNC 530 x-travel 705 mm y-travel 425 mm z-travel 610 mm Feedrate X-,Y-,Z,- axis 1 - 20.000 mm/min Feed force X-, Y-, Z-axis 12.000 N table surface area 1.260 x 460 mm T-slots (number x width x distance) 9 x 12-H8 x 50 mm 400 kg Hedpfxjzq Hkho Ab Ast Distance between floor and coordinate table 1.026 mm Distance between coordinate table and spindle nose 92 - 702 mm Horizontal outreach 480 mm spindle tunring speed 50 - 26.000 U/min drive capacity - main spindle 100/40% ED 11,5 / 15,0 kW Max. torque S1/S6 25,2/32,9 tool taper HSK-E50 number of tool places 28 Pos. max. tool diameter 63 mm max. tool-dia with free toolbox 100 mm tool length 260 mm weight of tools 3 kg output 22 kVA weight ca. 5.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation - FEHLMANN ATS 160 CNC dividing head Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, volume flow: 820 m³/h, pressure (max.): 10 bar, High-quality oil-lubricated screw compressor. It features a direct drive, which is the most efficient type of drive. Manufacturer: AIRPOL Model: NB 90 Capacity: 820 m3/h Maximum pressure: 1.0 MPa Motor power: 90 kW / 160 A (SCHORCH) Hjdpfszt Ahbsx Ab Ajt Screw element: GHH RAND, TYPE: CF128G (INGERSOLL) Operating hours under load: 27,062 h Weight: 1850 kg Year of manufacture: 2007 Complete DTR documentation and UDT inspection logbook with tank passport. Includes new air and oil filters. Technical condition: used machine.

Condition: new, functionality: fully functional, power: 196 kW (266.49 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system Hedpfxezi Uyzo Ab Aet * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), Year of construction: 2006, functionality: fully functional, For sale: lot of 3 Dosatronic LDHP pH controllers for chemical dosing systems. Manufacturer: Dosatronic Model / type: LDHP pH Controller Quantity: 3 pcs Application: pH control / chemical dosing systems Condition: unused old stock / New Old Stock Age: approx. 20 years in storage Functionality: not tested Accessories: no probes, no hoses, no pumps, no mounting accessories included Sale: preferably as complete lot The controllers come from unused warehouse stock. According to our information, they have never been installed or used. Due to the long storage period, they are sold as untested old stock. Suitable for: chemical dosing systems water treatment swimming pool technology pH regulation industrial process control food and chemical industry spare parts stock or resale Important note: This offer includes controllers only. pH electrodes, dosing pumps, hoses, valves and installation accessories are not included. Sold as shown in the photos. Location: Slovakia, EU Zum Verkauf stehen 3 pH-Controller für Dosieranlagen des Herstellers Dosatronic. – geeignet für pH-Regelung und chemische Dosiersysteme – industrielle Ausführung – unbenutzt (Lagerware / New Old Stock) Die Geräte stammen aus einem industriellen Lagerbestand und wurden nie installiert. Geeignet für: – Wasseraufbereitung – Schwimmbadtechnik – Chemische Industrie – Lebensmittelproduktion Zustand: Unbenutzt, jedoch länger gelagert. Funktionsprüfung nicht durchgeführt. Hjdpoyw Riqofx Ab Ajt Verkauf einzeln oder als Komplettpaket möglich.

Condition: good (used), Year of construction: 2012, Lightly used mixing, dispensing, and adhesive application system with a gear pump in good condition: t-s-i mastermix gear basic – Mixing and dispensing system for 2-component silicone adhesives – Two-component gear pump dispensing system – Hose set, 2.5 m, 2-component dispensing gun – Siemens S7-200 control system – Overpressure/underpressure cut-off – Pot life monitoring with acoustic warning – 200-liter component A container – 20-liter component B container Hodpfszq S Ifox Ab Ast – Swivel arm extension 800 mm – Swivel arm height increase 300 mm – Hose set extension 1000 mm – Automatic dispensing when in the "parking" position – Year of manufacture 2012, rebuilt by T-S-I in 2016/17 – System was lightly used – Sale from location Karlsruhe / Southern Germany – Inspection possible by arrangement

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm Hedpfxjzvxqwo Ab Aot -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Hodsruq Dfjpfx Ab Ast

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Screw diameter: 30 mm Screw diameter 2: 25 mm Hsdey Duaaopfx Ab Ajt Type: Multicomponent Drive: Hydraulic

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Screw diameter 1 : 30 mm Screw diameter 2 : 25 mm Type: Multicomponent Hodpezg Ib Tefx Ab Aet Drive: Hydraulic

Condition: excellent (used), Year of construction: 2014, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Ejector stroke: 175 mm Ejector force: 40 kN Hydraulic pump: 23,9 kW Screw: 35 mm, screw: L/D 20, 30 % glass Max wept volume 144 cm3 Mth: 35047 pump L x W x H: 3700 x 1650 x 2600mm Hedpfx Abjzilqks Aet Weight 3650 kg Language: CZ, English, German Condition: machine is excellent condition working untill 30 CW 2024, now not under power

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. Hedozvfk Dspfx Ab Ast TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. Hodpsv S Synjfx Ab Ast The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Hodpfxjwu Nw Uo Ab Ast Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 400-223, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, mount diameter: 40 mm, table length: 2,500 mm, table width: 1,250 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 30,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, tool diameter: 20 mm, number of slots in tool magazine: 30, We offer this used MB-Portatec GmbH basic IIS Portatec basic II.S portal milling machine, manufactured in 2011. Manufacturer: MB - PORTATEC GmbH Type: basic II.S Serial number: 400-223 Year of manufacture: 2011 -Application: Processing of aluminum and plastics from sheets up to 2500mm. -Optional extra: Vertical clamping system. -Accessories: Vacuum pump and extraction system with pre-separator. -MMS system -Programmable vacuum fields If you have any questions or require further information, please feel free to send us a message or call us. Hjdpfx Abey U R Syj Ajt

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Hodpfx Abeiz A Ezs Aet Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.