Used 2-Station Notching Machine With Angle Adjustment + Folding Machine, Press Brake, Notching Tool for sale (118,961)

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Rsdpfx Ajydvzdjnkjcd Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Rcedezdazbepfx Anksd Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Redpfx Ajyyygksnkocd Frequency: 50 Hz Power: 3,200 W

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Rcsdpfx Aoy Uiyvonked Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, Year of construction: 1985, machine/vehicle number: 27410, Pressstation für Falzmaschinen - Pressstation for Folding machine Stahl PS66Year 1985 - Serial-No. 27410/85 Working width max. 660mm Pressure 60.000N Speedca. min. 50 m/min - max. 100 m/min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Rsdpfx Anoh Ax A Hjkscd

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Rsdpfx Anjlf Ek Dskjcd

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length Rcodpfx Asdad Adonkjd - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2026, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Rodpfx Anjcrcgqekecd Marking template FREE :) Price: EUR 6,600.00 Delivery costs: PLEASE ASK Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2026, The best-selling and reliable PROD-MASZ press brake! Fast delivery time and high quality! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 180 kg The roller scissors (max. cutting capacity 0.8 mm / steel) The machine complies with CE guidelines and has a 12-month guarantee. Price: € 1.050.00 Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT. Rcedpfxjb Eg Hye Ankod

Condition: new, Year of construction: 2026, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000T/0,8 incl. wheels Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Rsdec Rtv Tepfx Ankjcd Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.350,00 Euro ( VAT excl. ) We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-3000 Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Max. bending angle: 145 degrees - Rotary shears cut to full working length Rodpfsctuptsx Ankecd - Thickness of bending bar: 20 mm - Protractor - Weight: 600 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Contact with what's app We provide invoices with 0% of tax. Payment in cash or by bank transfer in advance.

Condition: good (used), Year of construction: 2013, 480mm swing over bed, Redpfjzqr Hnjx Ankjcd 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Redpfsx Saulex Ankocd

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Rodpfx Aszlpgnenkocd

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Rcodpfx Aexxb Rrsnked

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm Redpfx Anoy Nd Sijkocd spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Rsdpfx Aoyzt Nzonkecd Price is for the entire unit.

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition Rcodpfxeyc Ig As Ankjd • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Rcjdpoxni Iqefx Anksd Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Rsdpfx Anexnizdekecd are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, diameter div. number 40x tool adaptor BT 40 Redpfxjww Nbfs Ankjcd

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. SEE THE TECHNICAL DESCRIPTION BELOW Rjdedfc Unepfx Ankocd Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm Rjdpfx Aogv I N Ujnkscd 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: Rcodpedfc Ikjfx Ankod 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Rcodpfx Asxdmgvenkod Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm