Used Absolute Encoder for sale (937)

Condition: used, functionality: unexamined, Ferwood Code: RU0011263 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iedpfov I Ac Sex Adkjtg

Condition: new, Krones Encoder 219-01025 Iedpfx Ash Rul Nodketg

Condition: used, Year of construction: 2022, machine/vehicle number: 0102-260011, Kaltenbach KBS750 DG Bandsaw Line with T14 transport system Kaltenbach KBS 750 double mitre horizontal bandsaw with LS270 NC cross-cut fence and T14 transport system in steel trade version - operation and programming are carried out at the control panel. This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsawing machine that is ideally suited for sawing sectional steel such as horizontal double T-beams, L-steel U-steel, flat material and rectangular tubes. KALTENBACH KBS 750 DG band saw Semi-automatic two-column bandsaw for sawing profiles with double miter swivel device. Technical data Cutting capacity: with 90° saw cut 750 mm × 500 mm +70°: 730 × 500 mm -70°: 710 × 500 mm +60°: 670 × 500 mm -60°: 650 × 500 mm +45°: 550 × 500 mm -45°: 520 × 500 mm +40°: 500 × 500 mm +30°: 390 × 500 mm Technical data: Min. profile cross-section: 10 × 10 mm Saw blade dimensions: 6990 × 41 × 1.3 mm, type bimetal M42, Z3/4 Drive power: Saw with frequency control: 5.5 kW Hydraulic unit (4.9 l/min): 1.5 kW Cutting speed: 15-100 m/min, continuously adjustable from the control panel Feed: work feed: 0-300 mm/min Fast forward and return: 2500 mm/min Working height: 640 mm Compressed air connection: 6-8 bar Air consumption: 500 NL/min (according to DIN 1342) Saw weight: approx. 3200 kg Saw dimensions: 3230 × 1160 × 2420 mm Itodpfoy Rimuex Adkeg Electrical system: Version according to EN 60204-1 Mains connection: 3 phases + N + PE / 50 Hz Power consumption: 17 kVA Fuse protection: 35 A Machine equipment Kaltenbach KBS 750 DG Very robust two-column guide for maximum precision. Inclined saw arm for higher performance and accuracy. Automatic table lowering during material transport Infinitely variable speed control via frequency converter. Hydraulic belt feed, manually adjustable NC-controlled angle adjustment with absolute value encoder Automatic cycle: Clamping - sawing - unclamping Horizontal clamping device: Fixed front stop, opposite clamping block via cylinder. Manually adjustable pressure reduction. Vertical tensioning device: Directly next to the belt; manually adjustable pressure. Backlash-free linear guides. Automatic adjustment of the belt guides Automatic cutting pressure control Remote diagnosis possible (telephone line required by customer) Hydraulic belt tensioning with electronic monitoring Automatic release at standstill Automatic stop in the event of belt breakage Micro-spraying system for clean operation and long service life Integrated chip container Separately driven chip brush Electronic slip monitoring Hydraulic heating

Condition: ready for operation (used), Siemens 1FT6084-8AH71-3EG1 synchronous servomotor SN:ELD88347901004 with absolute encoder 2048 S/R, used, in good condition, 100% fully functional, delivery scope as shown in the photos. Isdpfx Aoy Rchxedkjtg

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Isdpjytrgzofx Adketg Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: used, Adept Robot System, Industrial Robot, Used Machine Itsdpfx Adjwm Hnbeksg Dimensions: Length: 1250 mm Width: 520 mm Height: 1860 mm Manufacturer: Adept Robot System Model: Cobra 800 Type: SCARA (4-axis) Maximum reach: 800 mm Rated payload: 2 kg Maximum payload: 5.5 kg Repeatability (XY): ±0.017 mm Repeatability (Z): ±0.003 mm Repeatability (Theta): ±0.019° Protection class: IP65 Year of manufacture: 2003 (according to label) Special features: Outstanding precision and speed Integrated servo amplifier and controller (space-saving design) Conveyor tracking and vision system integration capability Easy calibration with absolute encoder Optional IP65 protection (dust and waterproof design) Summary: The Adept Cobra 800 is a high-performance, compact SCARA robot designed for fast, precise, and flexible industrial automation tasks. With a maximum reach of 800 mm, payload capacity of 2–5.5 kg, and excellent repeatability, it is an ideal solution for assembly and material handling operations.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,120 h, functionality: fully functional, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 655 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, torque: 12 Nm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Axis Travel Ranges X-AXIS (longitudinal): 7,800 mm Y-AXIS (lateral): 1,100 mm Z-AXIS (vertical): 655 mm B-AXIS (vertical-horizontal rotation of the machining head): 0° ÷ 90° C-AXIS (vertical rotation of the machining head): 0° ÷ 360° Traverse Speeds X-AXIS: 75 m/min Y-AXIS: 60 m/min Z-AXIS: 40 m/min B-AXIS: 3,240 °/min C-AXIS: 3,600 °/min Axis Acceleration X-AXIS: 3 m/sec² Y-AXIS: 3 m/sec² Z-AXIS: 2 m/sec² Motor Spindle Max. power in S1: 15 kW Max. speed: 24,000 rpm Max. torque: 12 Nm Tool holder: HSK – 63F Spindle encoder for rigid tapping Water cooling with cooling unit Automatic Tool Changer Standard for 16 tools Maximum permissible tool size in standard magazine: Ø = 80 mm L = 300 mm Maximum permissible saw blade size in standard magazine: Ø = 180 mm L = 150 mm Saw blade magazine for max. saw blade Ø = 500 mm L = 73 mm Processable Profile Sides With tool without angle head (profile top, profile sides, end faces): 5 With saw blade, Ø = 500 mm (profile top, profile sides, end faces): 1 + 2 + 2 Thread Cutting Performance (with tap on aluminium and through hole) Rigid tapping: M12 Larger threads possible with thread milling cutter Profile Feeding 2 reference stops with fixed positions Functions Dynamic pendulum mode Processing of overlengths up to max. double the machine length (X axis) Cutting and separating of the bar (not with 2-bar parallel operation) Automatic operation: milling and cutting (not with 2-bar parallel operation) Workpiece Clamping Standard equipment pneumatic clamping elements: Versions dynamic and static 7,800/6 Max. number of pneumatic clamping elements: 12 6 clamps per zone, movable along the entire machine range Max. profile width, Y, with standard tool clamping: 550 mm Motorized clamping device Absolute measurement of clamp position Safety Devices and Protective Equipment Light curtain system for workspace access protection 3-sided metal safety fence Full machine enclosure by accident and sound protection cabin Internal lighting Protective cover made of laminated safety glass Machine Structure Monoblock machine frame made of electro-welded and normalized steel Chip conveyor with steel belt on the right side of the machine Isdpfx Adey Iqr Teketg Machining Unit Portal construction Motor spindle controlled on 5 axes, simultaneous interpolation possible Minimal quantity lubrication system (oil) Central lubrication system for guides Operation and Control Control cabinet with cooling unit Pneumatic control cabinet CNC with real-time control MG-Pilot Industrial PC with touch screen Atom 1600 processor 15” graphic LCD-TFT color display Keyboard, mouse 1 Gbyte RAM 4 Gbyte Compact Flash card 4 USB ports RJ45 network card Software Microsoft® Windows® Embedded Bidi-CAM DRILL Power Supply (Voltage/Phases/Hertz) 400V/3PH/50Hz Software for Machining Center Control CAMPLUS for SATELLITE XT, graphical programming software for machining with 3D visualization SHAPE, software for creating any freeform machining contours

Condition: new, Year of construction: 2026, functionality: fully functional, Advanced machining centre for drilling, designed for high performance and precision. An ideal solution for furniture manufacturers, enabling complete processing of workpieces in a single working cycle. Equipped with TPA control. Itedoxfrakspfx Adksg Automatic CNC six-sided drilling machine FEATURES AND EQUIPMENT - Six-sided drilling – complete vertical and horizontal machining in one cycle. - Drilling heads: 9 top vertical drills, 9 bottom vertical drills, 8 horizontal drills (2 per side). - TPA control – user-friendly interface with integration capability for CAD/CAM software. - QR and barcode reader. - Absolute encoders – ensure accurate positioning and repeatability. - Automatic tool change. TECHNICAL SPECIFICATIONS: Maximum workpiece width: 1200 mm Workpiece thickness: 10–48 mm Minimum workpiece width: 50 mm Maximum workpiece length: 5000 mm Minimum workpiece length: 250 mm

Condition: ready for operation (used), Year of construction: 2018, Robot arm manufactured in 2018. This Hyundai Hi 5a-S features 16 simultaneous controlled axes, offering advanced programming and playback capabilities. It includes a full digital servo system and a user-friendly teach pendant with a 7" color TFT-LCD touch panel. The machine comes with a special gripper and a robust support podium. If you are looking to get high-quality automation capabilities, consider the Hyundai Hi 5a-S robot arm we have for sale. Contact us for further details. Itjdpsy Hiamefx Adksg • Control model: Hi5a-S • Number of controlled axes: 16 simultaneous • Operations: Programming and Playback • Interpolations: PTP, Linear, Circular • Position control: Serial Absolute Encoder • Memory/backup: USB or Ethernet • Servo system: Full digital servo • Interface: Native DeviceNet, 2x Ethernet, 2x RS232/RS422, 1x USB, 1x CAN (optional), 1x DeviceNet Master, 1x SD card • Dimensions: 700 × 900 × 630 mm • Teach pendant: TP520 (7" color TFT-LCD touch panel, Windows CE) • Compliance: CE Declaration of Conformity and manuals included Additional equipment • Robot support podium (machined base ready for floor fixing) • Special gripper with spring-suspended suction cups and autonomous vacuum generator • Removable “claws” for tray handling • Industry 4.0 cyber-physical system (remote monitoring / tele-assistance) • Pro-face 7" color touch panel for production monitoring

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Iedovvi N Ijpfx Adketg

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Isdevvi Scopfx Adkotg

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. Isdpfxjwgbuij Adketg - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with a comprehensive range of drilling and milling tools to meet any requirements in the processing of wood and similar materials. Highlights: • Powerful, featuring drilling spindles with 8,000 RPM and advanced technology – the most robust spindle available on the market, offering over 1,000 hours of maintenance-free operation Iodpfx Adoywvldekotg • Better and more extensively equipped, with a multifunction table that allows for various configuration options, ensuring optimal setup according to your needs • Easier and more intuitive programming thanks to the integrated Cad-Cam module 'MAESTRO CNC' • User-friendly operation: the work table is accessible at all times, and both control cabinet and vacuum pump are integrated. In the PRO SPACE configuration, there are no safety barriers required Construction: The supporting structure consists of an exceptionally robust monolithic steel base, heavily ribbed and very rigid; its particularly wide support surface is specifically designed to ensure the machine’s stability, providing sustained precision regardless of working conditions, without the need for floor anchoring. The base provides a large, solid foundation for the moveable gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of withstanding the highest demands, resulting in superior performance quality and greater accuracy. The movable portal is formed from a solid single piece, anchored to both sides of the base and running on high-quality prismatic guides with recirculating ball carriages. Dual drive motors on the X-axis ensure top performance even under heavy-duty conditions. Movement along the lower movable unit (X-axis) and along the gantry (Y-axis) is achieved via helical rack and pinion transmission. This enables higher tooth-by-tooth thrust, greater acceleration, and increased velocity along the X and Y axes. The specially designed helical gearing ensures lower wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, providing perfect balance under dynamic load as well as allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, guaranteeing top-quality finishing since potential vibrations are fully eliminated. Movement along the X-Y-Z axes is accomplished with brushless motors powered by digital inverters, offering: - Reduced processing times due to improved acceleration - Enhanced positioning accuracy with high-resolution encoders - No need for setup referencing upon startup thanks to absolute encoders - Practically no general maintenance required due to the brushless system, as there are no brushes Axis movement and general machine operating elements are managed by an industrial NS module with digital data transmission.

Year of construction: 2019, condition: ready for operation (used), Automation Buchsenpresse manufactured in 2019. This EMS model features a maximum joining force of 50 kN and a joining stroke typically ranging from 100 to 300 mm. It utilizes an electromechanical servo drive for precise force and displacement control. If you are looking to get high-quality joining capabilities, consider the EMS Automation Buchsenpresse machine we have for sale. Contact us for further details. • Joining stroke: typically 100–300 mm • Frame options: C-frame or gantry frame (custom design) • Guide/drive: Backlash-free linear guide, preloaded ball screw drive, electromechanical servo drive • Mounting interfaces: Customer-specific workpiece and tool holder • Joining modes: Force-controlled, displacement-controlled, combined force–displacement Itjdpfxeyyyk Aj Adksg • Process monitoring: Force–displacement diagram (XY curve), limit curve monitoring, OK/NOK evaluation • Accuracy: Force typically ±1% of final value; displacement typically ≤0.01 mm • Operation: Touch panel (HMI) • Interfaces: Digital I/O • Sensors: Integrated strain gauge force sensor (50 kN); displacement measurement via absolute or incremental encoder on the spindle drive

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Isdofu Irzspfx Adkotg Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. Isdpefu Itbjfx Adkjtg • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Year of construction: 2010, condition: used, functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Itjdpew Dzagofx Adksg Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Year of construction: 2026, condition: new, The PD 100 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Trolley with 12 ball bearings • Control positioning device Isdpfx Aefv T Nmsdkjtg • Positioning accuracy 0.1 mm/m • Steel guide rail with precision toothed rack • Steel carrier profile as dirt protection • Stop arm with spring damping • Additional mountable stop extension l = 200 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.6 m • Left or right hand versions available • Accesories: -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors on request It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, The PD 50 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Carriage with multiple ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Motorized clearance function • Steel guide rail with precision rack • Multi-adjustable stop arm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available Itodpfx Ajfv T Dwjdksg • Accesories: -Stop arm with spring damping -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors (e.g. roller conveyor width 290 mm or 407 mm etc.) It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted Iodpfx Ajuxfu Nedkstg - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible Iodpfx Adsuxfucskotg External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: refurbished (used), Year of construction: 2020, Machine Type: Cylindrical Grinding Machine Manufacturer: Schaudt Maschinenbau GmbH Model: PS 4 Year of Original Manufacture: 1986 Renovation/Retrofit: 2020 Control System (Post-Retrofit): Siemens CNC SINUMERIK 840D General Specifications Application: External cylindrical grinding Grinding Method: Plunge, traverse, face grinding Control Type: CNC (Siemens retrofit in 2020) Machine Weight: Approx. 3,500 – 4,500 kg Installation Area: Approx. 3.5 m x 2.0 m Workpiece Capacity Center Height: 180 mm Distance Between Centers: 1000 mm (varies by version) Max Workpiece Diameter: 360 mm Max Workpiece Weight: ~150 kg between centers Grinding Spindle Grinding Wheel Diameter: 400 mm Grinding Wheel Width: 50 mm Bore: 127 mm Peripheral Speed: Up to 45 m/s Spindle Drive Power: ~7.5 kW Spindle Speed Range: Up to 1,500 – 2,500 rpm (depending on wheel size) Headstock Type: Fixed or rotating spindle Speed Range (if motorized): ~30 – 500 rpm Taper: MK4 or similar Drive: AC Servo (post-retrofit) Tailstock Type: Manual or hydraulically actuated Quill Stroke: Approx. 50 mm Quill Diameter: ~75 mm Axes X-Axis (infeed): CNC-controlled Z-Axis (longitudinal): CNC-controlled Resolution: 0.001 mm Drive Type: Digital servo motors with ball screw Position Feedback: Absolute/Incremental linear encoders Isdpsw Avrzsfx Adkstg Coolant System Coolant Tank Capacity: Approx. 150 – 250 liters Coolant Pump: High-pressure, with filtration system Other Features (Post-Retrofit) Siemens HMI with touch interface Electronic handwheels (MPG) Updated safety system and enclosure New electrical cabinet with ventilation and cooling Optional AE sensor for gap detection or touch dressing

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 Itjdpfxjx D Nl Ij Adkjg • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018)Overhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement Iedpex D D Ikofx Adkstg • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 Iodpox Enknjfx Adkjtg • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone