Used Aim 80V 5Pzs62 75% C5 Test for sale (17,172)

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating Lodsyzzm Ispfx Akyjhf External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Year of construction: 2024, condition: used, For inquiries regarding the crawler, Mr. Herden is available to assist you (by phone). Seppi M. MAX 75 HP / 75 PS / Radio-controlled crawler vehicle / Recovery winch / Seppi M. MICROFORST rc 155 forestry mulcher / Seppi M. H 5 rc 175 mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard specification and features: Dimensions*: - Overall width, undercarriage retracted: 1,650 mm - Overall width, undercarriage extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Cross/longitudinal incline: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Output: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversing fan (automatic fan cleaning) Drive: Hydraulic system for attachments: - High-flow hydraulic circuit (closed circuit) for attachments (double-acting): - Capacity: 93 l/min max. at 2,750 rpm - Pressure: 380 bar Hydraulic system services: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: 15 l/min max. at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: 154 l/min max. at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on slopes up to 55° under optimal conditions - Hydraulic adjustment of vehicle width 800 mm (2x400 mm) - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailment protection - Stability and traction thanks to robust tread and large track contact area Control: - Remote control with graphic display (machine vital data and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable feed from 0 to 100% Lifting gear: - FLOAT: Lifting gear with float position (ground pressure control) Standard equipment: - Vehicle with roll bar - LED headlights - Internal components protected by heavy-duty steel covers - Skid plate to protect the engine and hydraulics - Color: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch Optional: SEPPI M. MICROFORST rc 155 – hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a very large selection of various Seppi M. products in stock and immediately available! Lsdsyfrpgopfx Akyshf Mr. Herden (phone) will be glad to assist you. We are happy to provide you with a financing offer upon request. We are an official Seppi M. sales and service partner. We supply the complete Seppi M. product range! Subject to error and prior sale! Rental possible = Further information = New: Yes For more information, please contact Tobias Ebert.

Condition: excellent (used), mileage: 31,045 km, power: 121 kW (164.51 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,950 mm, total width: 2,220 mm, total height: 3,160 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, loading space length: 41,500 mm, loading space width: 20,900 mm, loading space height: 21,000 mm, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional Options and Equipment = - Automatic dipped beam headlights - Heated exterior mirrors - Passenger bench seat - Roof spoiler - Third brake light - Euro 6 - Driver airbag - Remote central locking - Cruise control - Wooden slat interior lining - Wireless mobile phone charging - Air conditioning - LED daytime running lights - Front center armrest - Fog lights - Rain sensor - Side door - Immobilizer - Advertising decals (applied) - Partition wall with window = More Information = General Information Number of doors: 2 Cab type: single Registration number: V-26-PHD Technical Information Number of cylinders: 4 Lhsdpfx Aoyzh S Dekyof Engine displacement: 2,299 cc Transmission: RENAULT, 6-speed manual gearbox Front axle: Max. axle load: 1,850 kg; Steering Max. rear axle load: 2,100 kg Weights Unladen weight: 2,540 kg Payload: 960 kg Gross vehicle weight (GVW): 3,500 kg Functional Tail lift: D’HOLLANDIA, tailgate, 750 kg Maintenance, History and Condition APK (Roadworthiness inspection): valid until 05/2027 Technical condition: very good Visual condition: very good

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Lhsdsy Dqmcspfx Akyof Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Lhsdpfx Akjy Dqlrjyjf Clamping force: 100 t tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable Air valve x 6 Hydraulic core puller x 2 Control unit with hot runners x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized Engel service in Germany Dimensions Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW Ledpoy Dp Ncofx Akyehf All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2016, condition: good (used), functionality: fully functional, Zwick 5 kN tensile testing machine Ledpfx Aey Dhmgjkyehf

Condition: used, This listing is for the PTI Veripac P425 M5 Integrity Testing System. The unit is in full working condition and ready for immediate use. Designed for non-destructive leak detection using vacuum decay technology, it ensures packaging integrity for pharmaceutical and medical applications with precise, repeatable results. Lhsdpfjyyqa Iox Akysf Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4600 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever Lhjdpjy Dvlkofx Akyof longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm Lhedpfx Akjyzfzvjysf -Weight: 2.3 kg/pc.

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint Lhedpeyzfxhefx Akysf -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: 240/75/H75 mm -Weight: 2.2 kg

Condition: used, mileage: 990,000 km, power: 130 kW (176.75 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 4,090 kg, maximum load weight: 3,400 kg, overall weight: 7,490 kg, tire size: 205/75 R17,5, brakes: other, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 24,500 mm, total width: 24,500 mm, total height: 59,000 mm, Year of construction: 2008, front tire size: 205/75 R17,5, Equipment: ABS, air conditioning, cruise control, differential lock, ABS, work lights, electrically adjustable and heated exterior mirrors, roof hatch, differential lock, short cab (local haulage), air-suspended driver seat, leaf-air suspension, automatic transmission, lift and lower function, standard air conditioning, single-stage constant throttle, Euro 5 engine, entertainment: radio/CD, cruise control, rear wall viewing window, dual passenger seat, vehicle is not drivable, air compressor defective, sold as a parts donor for dismantling! Ledpjyzkclsfx Akyjhf

Condition: used, mileage: 999,999 km, power: 130 kW (176.75 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 4,090 kg, maximum load weight: 3,400 kg, overall weight: 7,490 kg, tire size: 205/75 R17,5, brakes: other, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 24,500 mm, total width: 24,500 mm, total height: 59,000 mm, Year of construction: 2008, front tire size: 205/75 R17,5, Equipment: ABS, air conditioning, cruise control, differential lock, ABS, work lights, electrically adjustable and heated exterior mirrors, roof hatch, differential lock, short cab (for local distribution), air-suspended driver's seat, leaf-air suspension, automatic transmission, lift and lower function, climate control: standard, single-stage constant throttle, Euro 5 engine, entertainment: radio/CD, cruise control, rear wall inspection window, double passenger seat, hydraulically height-adjustable fifth wheel operable from the driver's seat, vehicle is not drivable, air compressor defective, offered as a parts donor for dismantling! Lhodoyzkcfepfx Akysf

Year of construction: 1979, condition: reconditioned (used), Machinetype: wire nail press Make: WAFIOS Type: N75 Lhodoh Hnqtjpfx Akyjf Constr. year: 1979 diameter range: 2,0-3,8 mm nail length: 20-80 mm output – pieces/min: 440

Year of construction: 2024, condition: like new (used), Replacement shafts for Lindner Urraco 75 for sale For sale: high-quality replacement shafts suitable for a Lindner Urraco 75 shredder. - Application area: waste wood, domestic and commercial waste - Condition: as new / excellent condition - Version: Original Lindner shafts, not aftermarket replicas The shafts are immediately ready for use. Please contact us if interested. Ledpfsyzdrgsx Akyehf

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 400 mm gear width 600 mm max. module 20 min. module 0,1 Control Frenco Lsdpfx Akount Uzoyehf weight of the machine ca. 1,2 t Originally a Klingelnberg measuring machine, rebuilt and modernized in 2014 by Frenco. Windows 10, Frenco FGI-Pro software, current maintenance Double flank rolling test.

Condition: excellent (used), max. wheel diameter 5 - 630 mm gear width 500 mm max. module 20 min. module 0,5 workpiece weight 350 kg Control IBH Macro max. workpiece diameter 630 mm clamping length 1050 mm total power requirement 1,8 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,0 x 0,7 x 2,4 m Spur gear software for internal and external gearing Lhedpfx Aksyyqtzsyjf Profile inspection standard crowning head - root relief K - profile Direction test standard crowning head - root relief K - profile graduation test Axis position correction for on-the-fly measurements up to 0.2 mm axis position error Snail software 3 carriers for gears, 1 carrier block, calibration device, Windows 7

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage Lodpfeyzr Tfsx Akyjhf - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Lhjdpfxsnccx Hj Akyef

Condition: excellent (used), mileage: 92,080 km, power: 149 kW (202.58 HP), first registration: 07/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 5,300 mm, total width: 1,900 mm, permissible axle load (axle 1): 1,680 kg, permissible axle load (axle 2): 1,625 kg, Year of construction: 2023, Equipment: ABS, Apple CarPlay, air conditioning, power mirror, seat heater, trailer coupling, = Additional options and accessories = Lhsdpeyy U T Sefx Akysf - Air conditioning (automatic) - Alarm system - Automatically dimming rear mirror - Bi-xenon headlights - Driver's airbag - Hands-free - Headlight washers - Passenger bench - Passenger seat - Tinted glass = Remarks = Very beautiful Volkswagen Transporter built as a Bulli and 75th Years edition, Original Dutch car directly from the first owner. The complete maintenance history is available. In addition to the options already mentioned, it features: -Virtual cockpit -6 persons -Leather upholstery -Seat heating -Automatic -Camera system -Parking sensors -Xenon -Tow bar etc etc = More information = General information Number of doors: 6 Cab: double Registration number: VXF-93-X Technical information Number of cylinders: 4 Engine capacity: 1.968 cc Max. front axle load: 1680 kg Max. rear axle load: 1625 kg Weights Empty weight: 2.101 kg Carrying capacity: 999 kg GVW: 3.000 kg Max. towing weight: 5.300 kg Maintenance APK (MOT): tested until 07/2026 Condition Technical condition: very good Visual appearance: very good Damages: none = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email:

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,600 mm, total length: 1,500 mm, table width: 500 mm, type of input current: three-phase, distance table to quill: 550 mm, workpiece length (max.): 800 mm, workpiece width (max.): 480 mm, workpiece height (max.): 250 mm, control cabinet length: 880 mm, control cabinet width: 700 mm, control cabinet height: 1,860 mm, input voltage: 400 V, overall weight: 1,240 kg, tank capacity: 280 l, Equipment: documentation/manual, Sinker EDM Machine CM323Z Technical Data Maximum table travel (X x Y): 300 x 200 mm Maximum head travel (Z): 300 mm Orbital movement (deflection) U-V travel: ± 5 mm Distance head/table: 250 to 550 mm Table size: 500 x 350 mm Maximum workpiece weight: 500 kg Work tank dimensions: 820 x 500 x 300 mm Dielectric tank volume: 280 l Maximum electrode weight: 15 kg Smooth linear guides Glass scale encoders on all 3 axes Required space (W x D x H): approx. 1600 x 1500 x 2400 mm Weight: 1000 kg Generator / Power Supply Unit 75 EZ Technical Data Maximum machining current: 75 A Power consumption: 5 kVA Maximum possible feed rate: 550 mm³/min Achievable surface finish: 0.45 µm/Ra Electrode wear rate: 0.2 % Required space (W x D x H): approx. 700 x 880 x 1860 mm Weight: 240 kg Additional options included: Orbital and Z-axis deflection system – CNC controlled. Programmable Z-axis allows for both roughing and finishing in a single operation; thread eroding is also possible. Fire extinguisher Permanent magnetic chuck 150 x 300 mm Rapid tank filling system Safety switch for tank door Manual quick-change chuck Included accessories: Quick-change system with approx. 20 electrode holders Electrode materials: copper and graphite Lhjdjy A If Topfx Akyof Drill chuck, collets Tool cabinet Dielectric fluid Operator training at our facility in 1110 Vienna included The machine has rarely been used (1,083 operating hours) and is therefore in very good condition, and can be demonstrated under power. Inspection possible during our business hours or by appointment. Sale due to upcoming retirement.

Condition: used, mileage: 545,488 km, power: 228 kW (309.99 HP), first registration: 01/2011, fuel type: diesel, tire size: 315/80 R22.5, wheelbase: 4,650 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, suspension: steel-air, total length: 9,600 mm, total width: 2,600 mm, total height: 3,500 mm, Year of construction: 2011, Equipment: ABS, cruise control, soot filter, = Additional Options and Accessories = Lsdpfx Akjyyhmloyjhf - CD player - Particulate filter - Headlights - Visor - Alternating current - Toolbox = Further Information = Tire size: 315/80 R22.5 Brakes: Disc brakes Front axle: Steerable; Left tire tread: 3 mm; Right tire tread: 3 mm; Suspension: Leaf spring Rear axle 1: Steerable; Left tire tread: 5 mm; Right tire tread: 5 mm; Suspension: Air suspension Rear axle 2: Twin tires; Left inner tire tread: 5 mm; Left outer tire tread: 5 mm; Right inner tire tread: 5 mm; Right outer tire tread: 5 mm; Suspension: Air suspension Unladen weight: 15,830 kg Payload: 10,170 kg Gross vehicle weight: 26,000 kg Damage: None

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Ledpfswl Rucox Akyjhf Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Condition: excellent (used), mileage: 77,900 km, power: 121 kW (164.51 HP), first registration: 02/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,860 mm, total width: 2,200 mm, total height: 3,040 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, loading space length: 41,500 mm, loading space width: 20,900 mm, loading space height: 21,000 mm, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional Options and Equipment = - Automatic dipped headlights - Heated exterior mirrors - Passenger bench seat - Roof spoiler - Euro 6 - Driver airbag - Remote central locking - Cruise control - Wooden slat interior trim - Wireless mobile phone charging - Air conditioning - LED daytime running lights - Front centre armrest - Fog lights - Rain sensor - Side door - Immobiliser - Advertising decals (applied) - Partition wall with window = Further Information = General Information Number of doors: 2 Cab type: single Registration number: V-51-PGN Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: RENAULT, 6-speed, manual Front axle: Max. axle load: 1,850 kg; Steered Max. rear axle load: 2,100 kg Weights Unladen weight: 2,634 kg Payload: 866 kg Gross vehicle weight: 3,500 kg Functional Tail lift: D’HOLLANDIA, tailgate, 750 kg Lodpfxjyypphe Akyshf Maintenance, History and Condition APK (roadworthiness test): valid until 02.2027 Technical condition: very good Visual condition: very good

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting 8 x turning tool holders Lhsdpswg Rv Nsfx Akysf 8 x drilling tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany