Used Air Damper Actuator for sale (26,711)

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm Kjdpfswu Tu Dex Ai Rodr 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, Year of construction: 2000, used, top condition, low hours Make: Schuko Model: TSK 250 CE Kdedpoycxh Refx Ai Rsr Year of manufacture: 2000 Machine no.: Motor: 7.5 kW Connection diameter: 250 mm Pressure approx. 2725 m³/h Air flow rate: 4595 m³/h Steel impeller Belt drive Vibration dampers Space requirement approx. 1300 x 700 x 1300 mm Weight approx. 200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-inspected condition, without warranty or guarantee.

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Kodpfjxzg Sasx Ai Rjdr Used Jun-Air 6-J mini air compressor providing quiet, oil-free compressed air for laboratory instruments and analytical equipment.

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm Kodpfxjy Umd Es Ai Rsdr table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: Kdsdpfx Ajy Umdloi Ror - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette -Manufacturer: Filt Air, air filter type GT4-13AE-YBCO -Front frame dimensions: 1210 x 600 mm, see photo nameplate -Connection: Ø 230/250 mm -Number: 20x air filters available -Price: per piece -Dimensions: 1210/190/H600 mm Kodpotpyq Uofx Ai Rsdr -Weight: 16 kg/piece

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data Kjdpfxofp A I Ej Ai Rsdr USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Ksdsyzbd Tspfx Ai Rodr

Condition: used, The SUNCOMBE SteriWasher is an innovative, robust, high-performance, and validatable parts washing system designed for use in the pharmaceutical, biotechnology, food and beverage, healthcare, and other critical sectors. The wash chamber is accessed via a sturdy hinged door and is constructed from 316 stainless steel, featuring a hygienic design. The combination of specially developed variable-power spray technologies enables the washer to deliver high-energy cleaning cycles alongside an energy-efficient rinsing process, easily selectable via simple recipe selection. Description SteriWasher™ parts washers utilize both proven and innovative technologies to provide an environmentally friendly cleaning solution with low water and energy consumption. They are suitable for production and research environments and can handle equipment ranging from critical small parts and tools to large mixers, drums, and containers. The product range is available with chamber sizes from 0.6 m x 0.6 m x 0.6 m up to the largest at 1.5 m x 1.5 m x 1.5 m. Customized variants with bespoke chamber sizes are also available to meet your requirements. The washers are fitted with crevice-free inserts and feature an airtight, leak-proof inflatable door seal for the complete unit and wash chamber. They come with standard or custom racks, with individually validated cleaning positions. These racks are removable and can be loaded onto mobile carts for easy loading and unloading. Models are available in single-door or double-door configurations for pass-through requirements. Washers are offered in single-door, straight double-door, or 90-degree double-door pass-through versions and are manufactured from 316 stainless steel to cGMP, EHEDG, ASME BPE, and GAMP standards, making them ideal for your wash area or cleanrooms. Features • 316L stainless steel chamber with radiused corners, sloped design, and crevice-free construction • Standard and custom chamber sizes • One or two chemical dosing systems • Automatically locking hinged door with optional window and internal lighting • Inflatable door seal for maximum safety • Load trolleys and racks specifically engineered for your items Kodpfx Aijyf N Ims Rsdr • Hygienic pneumatically actuated valves and instruments • Hygienic stainless steel pumps • Stainless steel covers • HEPA-filtered air drying and cooling • Pharmaceutical-grade washing machine Specification KVP Philosophy: Total loss, full or partial recovery Discharge temperatures: Ambient up to 90°C (aqueous) / ambient (solvents) Material: 316 stainless steel, Duplex, or Hastelloy Operating temperature: Ambient up to 95°C (120°C turbo drying cycle) Operating voltage: 230VAC or 400VAC (24VDC control) Automation: CIPSuite Level 2000 to 4000 (optional DCS integration) Reporting: Printed records available, optional 21CFR11 electronic records and batch reporting.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Kdsdpfx Aeztazfsi Rsr Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) Kdodpowzyh Rofx Ai Rer - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Kodpfx Aszlivpoi Rsdr Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Kdjdpfx Ajqy Em Tei Rsr Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: good (used), Year of construction: 2010, operating hours: 85,410 h, power: 15 kW (20.39 HP), Screw compressor Manufacturer: Atlas Copco Type: GA 15P Year of manufacture: 2010 Operating pressure: max. 9.8 bar Volume flow: 2.39 m³/min Power: 15 kW Operating hours under load: approx. 85,410 h Weight: 500 kg Includes refrigerant dryer. Kdodpfx Aozu Aw Esi Rjr

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Kdsdpfxezhkfqs Ai Ror Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Year of construction: 1980, condition: good (used), Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver Kdedpfx Aozt I Rzei Rer -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm -Weight: 22.2 kg

Condition: used, mileage: 100 km, power: 157 kW (213.46 HP), first registration: 04/2026, fuel type: diesel, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, loading space length: 4,200 mm, Equipment: air conditioning, Vehicle number: 540038 accident-free, service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system * Start-off assistant * Rear view camera ENGINE TRANSMISSION & CHASSIS * Traction control (ASR) INTERIOR * Air conditioning LIGHT & VISIBILITY * Green tinted windows * Side marker lights * Daytime running lights Other features * Chassis color anthracite gray * Driver's cab color E1980 crystal white * Headlight insert. and bumper: Stone Grey * Cab steps and fenders Stone Grey * Wheel trim rings silver grey * Goodyear * Tire pressure monitoring system * Front axle(s): 215/75R17.5 * Driven rear axle(s): 215/75R17.5 * Without spare tire * Steel disc wheels, silver grey * Pneumatic steering column lock * Soft-touch steering wheel, color black * Roof hatch with manual operation * Driver's seat: Air-sprung luxury driver's seat * Passenger double seat, velour cover * Converter 24 V to 12 V, 15 A, 180 W * Emissions class Euro 6 * Manual transmission, 6 gears * Rear axle ratio 3.73 * Mechanical differential lock * 6-speed manual transmission 6S800 OD, 6.58-0.78 * Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * Wheelbase 3.15 m / rear overhang 1.32 m * Standard component layout * Tank for AdBlue 30 l, right side of the chassis * Fuel tank left * AdBlue tank filler cap without locking * Rear underrun protection * Tail lights with bulbs * Battery box left, no spare wheel holder * Longitudinal member 210/4.5 mm, without internal reinforcement * EAS unit right, central discharge * Plastic fuel tank, 110 l * Maximum ambient temperature 38 degrees * Temperate climate * Air intake above, behind the cab * Water separator, heated * Body fastening method BAM 1, console type B * Fixed plug connection. Front driver's cab * Tail lift application * Use with drawbar, type plate, up to max. GVW * Pneumatic connection for trailer, swivel coupling * Crossbar D85-Dc70-V25 ball coupling D85, mounted * Electrical connection for trailer 24V/2x7-pin + 12 V * FGG chassis weight max. 7500 kg * Max. total train weight drive power 18000 kg * First transmission auxiliary drive N./4c-U-32/25 Kodpfx Asx Egtfji Rodr * Exhaust brake * Parking brake actuation with test position * Reverse alarm system * Basic immobilizer * DAF Side and Turn Assist * Alcohol lock, prepared * Electronic stability control (VSC) * Speed limit detection * DAF Drowsiness Detection * Rubber cab suspension, mechanical * Short-haul cab * Side not glazed / rear single glazed * 5 mirrors * Electrically adjustable mirrors * Mirror brackets, structure 2.50 - 2.60 m * Sun visor outside, green, translucent * Headlight beam for right-hand traffic * Halogen headlights with height adjustment * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 85 km/h nom. * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS connection, prepared * DAF Infotainment System: DAB radio with loudspeaker * Front: 3.60 t, parabola, raised, HD, F36 * Rear axle: 5.00 t, parabola, raised, SR 5.14 * Front axle 1, 3,200 kg, load index 124 * Rear axle 1, 5,000 kg, load index 116 * Generator 100 A, batteries 2x 125 Ah * Guarantee Plus drive train-3 years-200,000 km * Meiller DSK Type 3 model 11 * Plug-in storage rack as bulkhead attachment. ---- Subject to prior sale and errors.

Condition: used, mileage: 100 km, power: 157 kW (213.46 HP), first registration: 04/2026, fuel type: diesel, overall weight: 7,490 kg, gearing type: mechanical, emission class: euro6, loading space length: 4,200 mm, Equipment: air conditioning, Vehicle number: 540038 accident-free, service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system * Start-off assistant * Rear view camera ENGINE TRANSMISSION & CHASSIS * Traction control (ASR) INTERIOR * Air conditioning Kodpsx Egr Usfx Ai Rjdr LIGHT & VISIBILITY * Green tinted windows * Side marker lights * Daytime running lights Other features * Chassis color anthracite gray * Driver's cab color E1980 crystal white * Headlight insert. and bumper: Stone Grey * Cab steps and fenders Stone Grey * Wheel trim rings silver grey * Goodyear * Tire pressure monitoring system * Front axle(s): 215/75R17.5 * Driven rear axle(s): 215/75R17.5 * Without spare tire * Steel disc wheels, silver grey * Pneumatic steering column lock * Soft-touch steering wheel, color black * Roof hatch with manual operation * Driver's seat: Air-sprung luxury driver's seat * Passenger double seat, velour cover * Converter 24 V to 12 V, 15 A, 180 W * Emissions class Euro 6 * Manual transmission, 6 gears * Rear axle ratio 3.73 * Mechanical differential lock * 6-speed manual transmission 6S800 OD, 6.58-0.78 * Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * Wheelbase 3.15 m / rear overhang 1.32 m * Standard component layout * Tank for AdBlue 30 l, right side of the chassis * Fuel tank left * AdBlue tank filler cap without locking * Rear underrun protection * Tail lights with bulbs * Battery box left, no spare wheel holder * Longitudinal member 210/4.5 mm, without internal reinforcement * EAS unit right, central discharge * Plastic fuel tank, 110 l * Maximum ambient temperature 38 degrees * Temperate climate * Air intake above, behind the cab * Water separator, heated * Body fastening method BAM 1, console type B * Fixed plug connection. Front driver's cab * Tail lift application * Use with drawbar, type plate, up to max. GVW * Pneumatic connection for trailer, swivel coupling * Crossbar D85-Dc70-V25 ball coupling D85, mounted * Electrical connection for trailer 24V/2x7-pin + 12 V * FGG chassis weight max. 7500 kg * Max. total train weight drive power 18000 kg * First transmission auxiliary drive N./4c-U-32/25 * Exhaust brake * Parking brake actuation with test position * Reverse alarm system * Basic immobilizer * DAF Side and Turn Assist * Alcohol lock, prepared * Electronic stability control (VSC) * Speed limit detection * DAF Drowsiness Detection * Rubber cab suspension, mechanical * Short-haul cab * Side not glazed / rear single glazed * 5 mirrors * Electrically adjustable mirrors * Mirror brackets, structure 2.50 - 2.60 m * Sun visor outside, green, translucent * Headlight beam for right-hand traffic * Halogen headlights with height adjustment * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 85 km/h nom. * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS connection, prepared * DAF Infotainment System: DAB radio with loudspeaker * Front: 3.60 t, parabola, raised, HD, F36 * Rear axle: 5.00 t, parabola, raised, SR 5.14 * Front axle 1, 3,200 kg, load index 124 * Rear axle 1, 5,000 kg, load index 116 * Generator 100 A, batteries 2x 125 Ah * Guarantee Plus drive train-3 years-200,000 km * Meiller DSK Type 3 model 11 * Plug-in storage rack as bulkhead attachment. ---- Subject to prior sale and errors.

Condition: used, maximum load weight: 29,710 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 08/2027, loading space length: 9,790 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 50 m³, Equipment: ABS, SCHMITZ-Cargobull, type SKI 24 SL 9.6 / 3-axle rear-tipping semi-trailer with aluminum box body, pallet-width design, approximately 49.7 m³ cargo volume, loading dimensions approximately 9790 x 2440 x 2100 mm, HYVA front lifting unit in low-pressure design, max. 190 bar, aluminum floor at the rear approximately 3600 mm in 8 mm thickness, at the front 7 mm, front wall inclined at 20°, combination rear doors with rubber seal, symmetrically split with pivoting frame, one grain slide and one rotary lock per door, automatic, mechanical 4-hook rear wall locking system with 2 additional safety features, grain discharge with dust bag, access platform with ladder on the front left, roll-up tarpaulin that can be rolled up to the right using a crank, retractable underrun protection, ROTOS - SCB axles 3x 9000 kg air-suspended with lifting and lowering device, ABS, disc brakes with EBS 2/2M and ROLL Stability stability program, 1st axle can be lifted including starting aid actuation "3x brake", multi-chamber rear lights with additional 2x LED reversing lights, Jost support jacks, tires 385/65 R 22.5, unladen weight 6,290 kg, technically possible total weight 39,000 kg, paintwork: tipping body RAL 7035 light gray neutral, chassis 7350 nova gray, very good overall condition!, not a rental vehicle!, sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! Kdodpfxszrq Hce Ai Ror

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 2,400 mm, total height: 1,400 mm, total width: 1,300 mm, Kallfass Shrink Tunnel STANDARD 650 NT Universally applicable high-performance shrink tunnel with side-adjustable air flaps and externally adjustable bottom air outlets for precise control of the hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculation system, a tunnel hood with an additional double-chamber system, and significantly enhanced all-round insulation provide energy-efficient operation. Equipped with infinitely variable rod chain conveyor. This tunnel is suitable for use with all shrink films, especially polyethylene (LDPE) or polyolefin films, in medium to high performance ranges. Comprehensive standard features: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Infinitely variable speed adjustment for the rod chain conveyor • Wear-free, contactless temperature control • Energy-saving, highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Air outlet flaps adjustable from outside during operation • Fixed clearance height 200 mm • Adjustable working height • Safety equipment in accordance with EC Directive EN 60204: over-temperature monitoring • Machine design complies with EC Machinery Directive 98/37/EC (CE mark), built to EN/VDE standards and relevant accident prevention regulations for the food and beverage industry (GS test mark) Technical Data of Base Machine: Tunnel passage width: 650 mm Tunnel passage height: 200 mm (fixed) Length of heated tunnel hood: 1400 mm Extended tunnel outfeed: approx. 500 mm Working height, adjustable: 800 - 900 mm Product transport: rod chain conveyor, silicone-coated rods, rod spacing 25 mm, rod diameter 12 mm Transport speed, variable: 6 - 22 m/min Drive: three-phase geared motor 0.37 kW, frequency-controlled Kdedpfx Aoy Ic Hiji Rsr Heater blower output: constant Airflow adjustment: sliding dampers underneath and side air flaps, externally adjustable Temperature control: electronic thermostat, switching accuracy ± 0.2°C Control voltage: 24 V DC Power supply: 400 V three-phase current, 50 Hz with protective earth Installed heating capacity: 18 kW (average continuous consumption approx. 40%) Power rating: 20.5 + 11.1 kVA Nominal current at 400 V: 29.6 A in standalone mode Max. total connected load: 45.6 A incl. additional three-phase connection Control cabinet position and operator side: on the left in working direction Paint finish: Kallfass anthracite

Condition: used, mileage: 166,200 km, power: 115 kW (156.36 HP), first registration: 12/2012, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space volume: 22 m³, loading space length: 4,400 mm, loading space width: 2,467 mm, loading space height: 1,984 mm, Year of construction: 2012, Equipment: ABS, VARIO 816 D Beverage Flatbed/Tarpaulin 4.40 m * Payload approx. 3,250 kg * ORIGINAL mileage approx. 166,200 km * Electrically operated side tarpaulins, right + left, raise/lower function * Vehicle number for customer inquiries: 3888 * Emissions sticker (green) * Dual passenger seat * BlueTEC 5 (Euro V) * 'Isringhausen' hydraulic driver's seat * Engine brake with constant throttle * Transmission G 56-6/6.29-0.78 * Electric window lifters, driver and passenger doors * Brake system, anti-lock braking system (ABS) * Three-seater cab * Power steering * Reinforced rear parabolic springs, stage II * Reinforced front parabolic springs, stage I * Engine OM 904 LA 115 kW (156 HP) 2200 rpm * Air-actuated engine brake * Main fuel tank 90 liters, right * Digital tachograph EG * Wheelbase 3,700 mm * Electrically adjustable passenger side mirror * 13-pin trailer socket * 7-pin trailer socket * Reinforced front axle stabilizer for extreme high loads * Reinforced rear axle stabilizer, underframe * Full service record * Weight variant 7.49 t (2.5/5.6) * Reinforced cross member without trailer hitch * Tires, 205/75 R 17.5 * Hydraulic dual-circuit brake/dual-circuit air brake * Electrically adjustable driver’s side mirror * S cab (short) * 2/3-door configuration * Metallic paintwork No liability for printing or typing errors Sale only to commercial customers Subject to prior sale and errors* Modifications, prior sale, and errors expressly reserved. The description serves for vehicle identification and does not constitute a guarantee in terms of sales law. Only the contractually agreed description is binding. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING-FINANCING-RENT-TO-OWN offer Guarantee insurance available upon request from the insurer * TÜV / UVV tail lift inspection / tachograph check and OBU installation by our local partners * 30-day export license plate All export documentation possible, but must be requested individually * Toll-Collect registration can be done on site * Free transfer from Stuttgart Airport or Metzingen Train Station (Württemberg) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website * over 200 vehicles in stock at all times Kdedpfx Aier Edy He Rsr

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: WCF300810, overall weight: 1,300 kg, volume flow: 1,029.6 m³/h, pressure (max.): 9.5 bar, Equipment: type plate available, PROD. Mark TYPE RME 110 IVR G7 AIR S/N WCF300810 YEAR 2006 CAPACITY (kW) 110 OUTPUT (m3/min) 17.16 CIS (bar) 9.5 INVERTER no BUILT-IN DRYER no Kjdown Duzspfx Ai Rodr EXCHANGER no COOLED (AIR/WATER) yes ON TANK no DOCUMENTS no NEW/USED USED

Condition: used, Hosokawa Alpine Turboplex Classifier for ultrafine classification of dry powders. Model 500 ATP-NG (New Generation). Classifier wheel designed for reduced pressure drop and hence power consumption. Classifier manufactured in 2002 for project in Turkey. In storage for the last 8 years. Installed power - 22 kW. Airflow - 7500 m3/hour. Fineness range - 97% passing 120 - 8 micron. Can be used for separation of powders or for operation in closed circuit with a mill. Kdodpfxszvgl Ao Ai Rjr Feeding introduced either by gravity from above or in airstream from below. Scope of supply includes 55 kW exhaust fan to generate airflow through classifier system. PPDS can supply ancillary equipment and controls to complete system if required. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can provide a full refurbishment service. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Three machines available, each with an exhaust fan. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: good (used), Year of construction: 2005, operating hours: 3,736 h, functionality: fully functional, overall weight: 21,000 kg, For sale: Westeria wind sifter. Kdsdpjzbk U Tsfx Ai Ror Type: WS Raupe Operating hours: 3736 In good working condition. Year of manufacture: 2005. Fully mobile, with good tracks. Includes a generator. Ready for use. Keywords: Recycling, waste, sorting, wind sifter, sifter, screening, windshifter, windsifter, tracks, generator, power unit, tracks, mobile

Condition: used, mileage: 348,240 km, power: 220 kW (299.12 HP), number of seats: 34, gearing type: automatic, emission class: euro6, color: red, Year of construction: 2014, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. number). Mercedes-Benz Citaro Bus A700 TRACTION CONTROL SYSTEM (ASR), CAN BE DISCONNECTED B021 STATION STOP BRAKE WITH STARTING LOCK B200 OPERATING THE PARKING BRAKE VIA THE BRAKE PEDAL CD01 STEERING DAMPER CN01 ELECTRONIC LEVEL CONTROL (ENR) EB50 REGENERATION MODULE 24 V EB60 CIRCUIT BREAKER AUTOMATA INSTEAD OF FUSE LINKS EB81 SOCKET FOR BATTERY CHARGING (NATO TYPE) IM, EC20 SPEAKER IN THE PASSENGER COMPARTMENT EM11 MICROPHONE FOR DRIVER'S AREA, WITH GOOSENECK, WALL EM30 MICROPHONE ACTIVATION VIA A BUTTON ON THE CONSOLE EU01 SAFETY MAIN SWITCH WITH MUSHROOM BUTTON EW99 ELIMINATION OF ONBOARD DIAGNOSTICS (OBD, INTEGRATED) FA03 LEFT AND RIGHT EXTERIOR MIRRORS, ELECTRICALLY HEATED FA04 LEFT AND RIGHT EXTERIOR MIRRORS, ELECTRICALLY ADJUSTABLE FF20 COMPARTMENT FOR DRIVER'S BAG IN THE DRIVER'S CABIN DOOR FF50 COMPARTMENT FOR FUSES BEHIND THE DRIVER'S SEAT FF55 COMMUNICATION TECHNOLOGY COMPARTMENT ABOVE THE DRIVER'S SEAT FK01 DRIVER'S CABIN WITH DRIVER'S CABIN DOOR FK75 DRIVER'S CABIN DOOR, LOCKING ELECTROMAGNETIC INSTEAD OF MECHANICAL FR05 SUNBLIND ON THE WINDSCREEN, DRIVER'S SIDE FR11 SUNBLIND ON THE DRIVER'S WINDOW, MANUALLY OPERATED FR15 SUNBLIND, WSS, DRIVER'S SIDE ELECTRICALLY OPERATED FS01 INTERIOR MIRROR ON THE HEADLINER, MANUALLY ADJUSTABLE FS20 INTERIOR MIRROR ABOVE THE ENTRY AREA, DOOR 2 FV01 FRONT END DESIGN, CITY BUS, STRAIGHT FRONT FW30 WASHER FLUID RESERVOIR, APPROX. 20 LITERS FZ20 FARE COLLECTION BOX, INTEGRATED IN THE DRIVER'S CABIN DOOR FZ21 ROTARY VENDING MACHINE, 2 PIECES, INTEGRATED IN THE HOUSING FZ60 COIN CHANGER WITH 6 COIN CHUTES (EURO) GA06 AUTOMATIC TRANSMISSION H001 ROOF AIR CONDITIONING SYSTEM, MANUFACTURER KONVEKTA HD01 ROOF HATCHES, ELECTRICALLY OPERATED HF10 ADDITIONAL VENTILATION FOR THE DRIVER'S AREA HH10 BLOWER HEATER FOR THE PASSENGER COMPARTMENT HK01 AIR CONDITIONING SYSTEM FOR THE PASSENGER COMPARTMENT, ROOF-MOUNTED DESIGN HL01 ROOF VENT FOR THE PASSENGER COMPARTMENT HP01 CIRCULATION PUMP FOR HEATING, WITH INCREASED OUTPUT HZ03 AUXILIARY HEATER WITH INCREASED OUTPUT HZ80 CONTROL UNIT HVAC IN EQUIPMENT COMPARTMENT 2 ABOVE JD06 FUEL CONSUMPTION DISPLAY IN THE MULTIFUNCTION DISPLAY JD80 REVERSING WARNING SIGNAL, ACOUSTIC SPEEDOMETER DISPLAY, MEASUREMENT RANGE 125 KM/H JT10 TACHOGRAPH, EG CONTROL UNIT, DIGITAL JW02 WARNING SIGNAL, ACOUSTIC, PARKING BRAKE NOT ENGAGED JW53 FIRE DETECTION SYSTEM, WITH DETECTION CIRCUIT JW80 ACCIDENT DATA RECORDER (UDS) K260 QUICK-RELEASE COUPLING, MANUFACTURER BARTELT K500 EXHAUST PIPE ANGLE TO THE ROAD KB04 ADDITIONAL FUEL TANK, APPROX. 40 L LA11 DAYTIME RUNNING LIGHTS WITH LED TECHNOLOGY MG03 MAXIMUM SPEED, DESIGN-RELATED, 90 KM/H Kjdpfx Aijyhyiwj Redr MN56 AUXILIARY DRIVE UP TO 300 NM MQ27 OIL DRAIN ONLY, NO OIL LEVEL DIPSTICK MS09 STARTER MOTOR MELCO 90P55 MZ01 AUTOMATIC ENGINE OIL REFILLING MZ02 ENGINE OIL DIPSTICK MZ03 ENGINE OIL LEVEL INDICATOR IN THE DISPLAY, COMBINATION INSTRUMENT MZ10 DRAIN VALVE FOR COOLANT AT THE LOWEST POINT MZ14 COOLANT REFILLING CONTAINER, ADDITIONAL, WITH ELECTRIC PUMP MZ20 AIR COMPRESSOR, 2 CYLINDERS, REGULATED WITH TWO-STAGE NA03 EXTERNAL DISPLAYS, MANUFACTURER MOBITEC NA32 DESTINATION DISPLAY EVOBUS, LED TECHNOLOGY NF44 STATION STOP DISPLAY, 24 CHARACTERS IN GREEN NH05 SILKSCREEN PRINTING ON THE REAR WINDOW AND MOUNTINGS NH60 NUMBER DISPLAY REAR, MATRIX RESOLUTION 16X28 NT01 CONTROL UNIT EVOBUS, FOR CONTROLLING EXCLUSIVELY NV01 MOUNTINGS AND INSTALLATION OF DIRECTION AND NUMBER INDICATORS NV12 DI